LITE ON TECHNOLOGY WN4516R 802.11n, Dual Band 2T2R Wireless LAN USB Module User Manual LiteOn Technology Corp

LITE-ON Technology Corp. 802.11n, Dual Band 2T2R Wireless LAN USB Module LiteOn Technology Corp

User Manual

Page 1/15 802.11n, Dual Band 2T2R Wireless LAN USB Module WN4516R User Manual * This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC
Page 2/15 CONTENT FCC WARING STATEMENT .......................................................................................................... 3 IC WARING STATEMENT .............................................................................................................. 4 PRODUCT FEATURES .................................................................................................................... 5 PRODUCT SPECIFICATIONS ........................................................................................................ 6 MAIN CHIPSET ....................................................................................................................................... 6 FUNCTIONAL SPECIFICATIONS ............................................................................................................... 6 PIN ASSIGMENT ............................................................................................................................... 8 USB CONNECTOR SPEC ................................................................................................................. 8 MECHANICAL .................................................................................................................................. 9 SHIELDING CASE SPEC ............................................................................................................... 10 ANTENNA SPEC ............................................................................................................................. 11 BLOCK DIAGRAM ......................................................................................................................... 12 MODULE PHOTO ........................................................................................................................... 12 EEPROM INFORMATION ............................................................................................................ 13 ENVIRONMENTAL ........................................................................................................................ 13 OPERATING .......................................................................................................................................... 13 STORAGE .............................................................................................................................................. 13 PACKING DRAWING .................................................................................................................... 14
Page 4/15 End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID: PPQ-WN4516R ” and “Contains transmitter module IC: 4491A - WN4516R” Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. 1) This device is intended for OEM integrators only. 2) Please see the full Grant of Equipment document for other restrictions. IC WARING STATEMENT Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d'Industry Canada (IC) Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
Page 5/15 This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person's body). Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l’appareil de sans fil de façon à minimiser les contacts humains lors du fonctionnement normal. Ce périphérique a également été évalué et démontré conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition à des appareils mobiles (les antennes se situent à moins de 20 cm du corps d'une personne). PRODUCT FEATURES  Operate at ISM frequency Band (2.4 / 5GHz)  IEEE Standards Support, 802.11a , 802.11b, 802.11g and 802.11n  Support USB 2.0 host interface  Enterprise level security supporting: WPA, WPA2, WPS2.0, WAPI  Two-stream IEEE 802.11n support for 20MHz and 40MHz bandwidth channels provides PHY layer rates up to 300Mbps  Integrated LNA, PA and T/R switch  Support Wi-Fi Direct  RoHS compliance  Low Halogen compliance
Page 6/15 PRODUCT SPECIFICATIONS MAIN CHIPSET MAC/ Baseband/ RF: MediaTek MT7600U FUNCTIONAL SPECIFICATIONS Wi-Fi Function Standard IEEE802.11a;IEEE802.11b; IEEE 802.11g; IEEE 802.11n Bus Interface USB2.0 Data Rate 802.11a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz Media Access Control CSMA/CA with ACK Modulation Techniques 802.11a: 64QAM, 16QAM, QPSK, BPSK 802.11b: CCK, DQPSK, DBPSK 802.11g: 64QAM, 16QAM, QPSK, BPSK 802.11n: 64QAM, 16QAM, QPSK, BPSK Network Architecture Ad-hoc mode (Peer-to-Peer) Infrastructure mode Operation Channel 2.4GHz 11: (Ch. 1-11) – United States 13: (Ch. 1-13) – Europe 14: (Ch. 1-14) – Japan 5GHz 21: USA 19: EU 8: Japan Frequency Range 802.11bg 2.400 ~ 2.4835 GHz 802.11a 5.15 ~ 5.85 GHz Transmit Output Power – 2x2 MAX: 16.5dBm (Tolerance: ±1.5dBm) 802.11a: 12 dBm@6Mbps 12 dBm@54Mbps 802.11b: 15 dBm@1Mbps 15 dBm@11Mbps 802.11g: 14 dBm@6Mbps
Page 7/15 14 dBm@54Mbps 802.11n: 2.4G 20MHz: 13 dBm@MCS0 13 dBm@MCS7 13 dBm@MCS15 40MHz: 13 dBm@MCS0 13 dBm@MCS7 13 dBm@MCS15 5G 20MHz: 11 dBm@MCS0 11 dBm@MCS7 11 dBm@MCS15 40MHz: 11 dBm@MCS0 11 dBm@MCS7 11 dBm@MCS15 Receiver Sensitivity 802.11a: -86 dBm@6Mbps -70 dBm@54Mbps 802.11b: -88 dBm@1Mbps -82 dBm@11Mbps 802.11g: -86 dBm@6Mbps -71 dBm@54Mbps 802.11n: 2.4G/5G 20MHz -86 dBm@MCS0 -68 dBm@MCS7 -68 dBm@MCS15 40MHz -83 dBm@MCS0 -65 dBm@MCS7 -65 dBm@MCS15 Security WPA, WPA2, WPS, WEP 64b&128bit, IEEE 802.1X, IEEE 802.11i Operating Voltage 3.3V ± 5% I/O supply voltage OS Supported Linux based Power Consumption Average Max TX Mode: TBD mA RX Mode: TBD mA Standby Mode: TBD mA Radio Off: TBD mA 1.2A Strongly recommend TV platform has to fulfill output current at least 1A Antenna Type Metal antenna
Page 8/15 PIN ASSIGMENT Pin. Pin Define Status 1 +3.3V YES 2 USB_D- YES 3 USB_D+ YES 4 GND YES 5 RESET# YES 6 GND YES USB CONNECTOR SPEC
Page 9/15 MECHANICAL
Page 10/15 SHIELDING CASE SPEC Manufacture: Hun Pai(宏湃)
Page 11/15 ANTENNA SPEC Manufacture: Hong Lin
Page 12/15 BLOCK DIAGRAM MODULE PHOTO
Page 13/15 EEPROM INFORMATION Reg Domain World Wide 2.4G/5G Read from registry; Control by driver Offset 0x38 for 5G: 0xFF Offset 0x39 for 2.4G: 0xFF Vendor ID 0x0471 Product ID 0x2126 ENVIRONMENTAL Operating Operating Temperature: 0 to 70 C (32 to 158 F) Relative Humidity: 5-90% (non-condensing) Storage Temperature: -20 to 70 C (-4 to 158 F) Relative Humidity: 5-95% (non-condensing)
Page 14/15 PACKING DRAWING Tray
Page 15/15

Navigation menu