LITE ON TECHNOLOGY WCBN4502B Wi-Fi (11a/b/g/n/ac 2Tx2R)+BT (V4.1LE) USB Combo Module User Manual LiteOn Technology Corp

LITE-ON Technology Corp. Wi-Fi (11a/b/g/n/ac 2Tx2R)+BT (V4.1LE) USB Combo Module LiteOn Technology Corp

User Manual

Page 2/12 PRODUCT SPECIFICATION Wi-Fi (11a/b/g/n/ac 2Tx2R)+BT (V4.1LE) USB Combo Module WCBN4502B BCM43569 Version 1.2 Networking B.U. Lite-on Technology Corporation 4F, No. 90, Chien 1 Rd., Chung Ho, New Taipei City 235, Taiwan, R.O.C. Customer Approval: (Signature) (Title) (Company) (Date) (Please Sign Back by FAX. For Confirming the Spec Only, not an Official Agreement for OEM/ODM Business)
Page 3/12 CONTENT PRODUCT FEATURES .................................................................................................................... 4 BT FEATURE: ......................................................................................................................................... 4 WI-FI FEATURE: ..................................................................................................................................... 4 COMMON FEATURE: ............................................................................................................................... 4 PRODUCT SPECIFICATIONS ........................................................................................................ 5 MAIN CHIPSET ....................................................................................................................................... 5 FUNCTIONAL SPECIFICATIONS ............................................................................................................... 5 PIN ASSIGMENT ............................................................................................................................... 8 USB CONNECTOR SPEC ................................................................................................................. 8 MECHANICAL .................................................................................................................................. 9 BLOCK DIAGRAM ........................................................................................................................... 9 ANTENNA SPEC ............................................................................................................................. 10 EEPROM INFORMATION ............................................................................................................ 12 BT ........................................................................................................................................................ 12 WI-FI ................................................................................................................................................... 12 ENVIRONMENTAL ........................................................................................................................ 12 OPERATING .......................................................................................................................................... 12 STORAGE .............................................................................................................................................. 12
Page 4/12 PRODUCT FEATURES BT FEATURE:  Bluetooth V4.1 LE system Backwards compatible with BT version of 1.1, 1.2, 2.0, 2.1, 3.0+HS and V4.0LE  Bluetooth Class II transmission power  Support for Adaptive Frequency Hopping(AFH), Secure Simple Pairing (SSP) and Extended Inquiry Response (EIR) function  Scatternet operation with up to four active piconets with background scan and support for scatter mode  Includes on-chip support for SBC encoding, and SBC and MP3 decoding  Low power consumption for meeting worldwide energy standards  Voice command and voice search for DTV/STB WI-FI FEATURE:  Operate at ISM frequency Band (2.4/5GHz)  IEEE Standards Support, 802.11a ,802.11b, 802.11g 802.11n and 802.11ac  Support for both 20 MHz/40 MHz channel width in 2.4GHz and 20 MHz/40 MHz/80MHz channel width in 5GHz  Enterprise level security supporting: WPS2.0,WAPI, WPA, WPA2  Dual-stream IEEE 802.11n support for 20MHz and 40MHz channels provides PHY layer rates up to 300Mbps  Dual-stream IEEE 802.11ac support for 80MHz channels provides PHY layer rates up to 867Mbps  Support for WI-Fi Direct  Support Wake On WLAN COMMON FEATURE:  BCM43569 is a single chip integrated IEEE 802.11 a/b/g/n/ac and Bluetooth 4.1 LE with a single USB interface  Fully compliance with USB v2.0 specification  Support OS: Linux based  RoHS compliance  Low Halogen compliance
Page 5/12 PRODUCT SPECIFICATIONS MAIN CHIPSET Broadcom BCM43569 FUNCTIONAL SPECIFICATIONS BT Function Standard Bluetooth V4.1LE Bus Interface USB2.0 Data Rate 1 Mbps, 2Mbps and Up to 3Mbps Modulation Scheme GFSK, π/4-DQPSK and 8-DPSK Frequency Range 2.402~2.480 GHz Transmit Output Power +4 ≤ Output Power ≤ +10dBm; Class I Device Receiver Sensitivity < 0.1% BER at -80dBm Wi-Fi Function Standard IEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE 802.11n; IEEE802.11ac Bus Interface USB2.0 Data Rate 802.11a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz 802.11ac: MCS 0 to 8 for HT20MHz MCS 0 to 9 for HT40MHz MCS 0 to 9 for HT80MHz Media Access Control CSMA/CA with ACK Modulation Technique 802.11a: 64QAM, 16QAM, QPSK, BPSK 802.11b: CCK, DQPSK, DBPSK 802.11g: 64QAM, 16QAM, QPSK, BPSK 802.11n: 64QAM, 16QAM, QPSK, BPSK 802.11ac: 256QAM, 64QAM, 16QAM, QPSK, BPSK
Page 6/12 Network Architecture Ad-hoc mode (Peer-to-Peer) Infrastructure mode Operation Channel 2.4GHz 11: (Ch. 1-11) – United States 13: (Ch. 1-13) – Europe 14: (Ch. 1-14) – Japan 5GHz 21: USA 19: EU 8: Japan Frequency Range 802.11bg 2.400 ~ 2.4835 GHz 802.11a 5.15 ~ 5.85 GHz Transmit Output Power – 2x2 (Tolerance: ±2dBm) 802.11a: 14 dBm@6Mbps 14 dBm@54Mbps 802.11b: 15 dBm@1Mbps 15 dBm@11Mbps 802.11g: 14 dBm@6Mbps 14 dBm@54Mbps 802.11n(2.4GHz): 20MHz: 13 dBm@MCS0 13 dBm@MCS7 40MHz: 13 dBm@MCS0 13 dBm@MCS7 802.11n(5GHz): 20MHz: 12 dBm@MCS0 12 dBm@MCS7 40MHz: 12 dBm@MCS0 12 dBm@MCS7 802.11ac: 20MHz: 11 dBm@MCS0 11 dBm@MCS8 40MHz: 11 dBm@MCS0 11 dBm@MCS8 11 dBm@MCS9 80MHz: 11 dBm@MCS0 11 dBm@MCS8 11 dBm@MCS9 Receiver Sensitivity 802.11a: -86 dBm@6Mbps -70 dBm@54Mbps 802.11b: -88 dBm@1Mbps -82 dBm@11Mbps 802.11g: -86 dBm@6Mbps
Page 7/12 -70 dBm@54Mbps 802.11n(2.4GHz): 20MHz -86 dBm@MCS0 -69 dBm@MCS7 40MHz -83 dBm@MCS0 -66 dBm@MCS7 802.11n(5GHz): 20MHz -84 dBm@MCS0 -67 dBm@MCS7 40MHz -81 dBm@MCS0 -64 dBm@MCS7 802.11ac: 20MHz -64 dBm@MCS8 40MHz -62 dBm@MCS8 -59 dBm@MCS9 80MHz -59 dBm@MCS8 -56 dBm@MCS9 Security WPS, WPA, WPA2, WEP 64bit & 128bit, IEEE 802.1X, IEEE 802.11i Common Function Operating Voltage 5.0 V ±5% I/O supply voltage Power Consumption Mode Average Peak 2.4G 5G 2.4G 5G TX 660mA 770mA 1A 1.2A RX 640mA 755mA Idle 30mA Disable 7mA Antenna Type Dual Metal antennas for WiFi Single U.FL Antenna for BT
Page 8/12 PIN ASSIGMENT Pin. Pin Define Description Status 1 +5V 5V source YES 2 USB_D- USB Data- YES 3 USB_D+ USB Data+ YES 4 GND Ground YES 5 BT_REG_ON# Active Low to Reset Bluetooth YES 6 BT_HOST_WAKE# Bluetooth wake up Host, Low Active YES 7 BT_DEV_WAKE# Host wake up Bluetooth, Low Active YES 8 NC NC YES 9 WL_REG_ON# Active Low to Reset WLAN YES 10 WL_HOST_WAKE# WLAN wake up Host, Low Active YES 11 WL_DEV_WAKE# Host wake up WLAN, Low Active YES 12 GND Ground YES USB CONNECTOR SPEC
Page 9/12 MECHANICAL BLOCK DIAGRAM
Page 10/12 ANTENNA SPEC On Board Antenna for Wi-Fi
Page 11/12 External Antenna for BT
Page 12/12 EEPROM INFORMATION BT Vendor ID 0x0A5C Product ID 0xBD27 WI-FI ccode 0xTBD regrev 0xTBD Vendor ID 0x0A5C Device ID 0xBD27 ENVIRONMENTAL OPERATING Operating Temperature: 0 to 70 C (32 to 158 F) Relative Humidity: 5-90% (non-condensing) STORAGE Temperature: -40 to 80 C (-40 to 176 F) Relative Humidity: 5-95% (non-condensing)
FCC WARING STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC RF Radiation Exposure Statement: 1. This Transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
According to FCC 15.407(e), the device is intended to operate in the frequency band of 5.15GHz to 5.25GHz under all conditions of normal operation. Normal operation of this device is restricted to indoor used only to reduce any potential for harmful interference to cochannel MSS operations. Information to OEM integratorThe OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual which is provided by OEM integrators for end users must include the following information in a prominent location. 1. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multitransmitter product transmitter product procedures.2. Only those antennas with same type and lesser gain filed under this FCC ID number can be used with this device.3. The regulatory label on the final system must include the statement: “Contains FCC ID: PPQ-WCBN4502B “.4. The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter module except such device has implemented twoways authentication between module and the host system.5. If the end product integrating this module is going to be operated in 5.15 ~5.25GHz frequency range, the warning statement in the user manual of the end product should include the restriction of operating this device in indoor could void the user’s authority to operate the equipment.
IC WARING STATEMENTCanada, Industry Canada (IC) NoticesThis Class B digital apparatus complies with Canadian ICES-003 and RSS-247.Operation is subject to the following two conditions: (1) this device may not causeinterference, and (2) this device must accept any interference, including interferencethat may cause undesired operation of the device.Canada, avis d'Industry Canada (IC)Cet appareil numerique de classe B est conforme aux normes canadiennes ICES-003 etRSS-247.ICSon fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doitpas causer d'interference et (2) cet appareil doit accepter toute interference, notammentles interferences qui peuvent affecter son fonctionnement.Radio Frequency (RF) Exposure InformationThe radiated output power of the Wireless Device is below the Industry Canada (IC)radio frequency exposure limits. The Wireless Device should be used in such a mannersuch that the potential for human contact during normal operation is minimized.This device has also been evaluated and shown compliant with the IC RF Exposurelimits under mobile exposure conditions. (antennas are greater than 20cm from aperson's body).Informations concernant l'exposition aux frequences radio (RF)La puissance de sortie emise par l’appareil de sans fil est inferieure a la limited'exposition aux frequences radio d'Industry Canada (IC). Utilisez l’appareil de sans filde facon a minimiser les contacts humains lors du fonctionnement normal.Ce peripherique a egalement ete evalue et demontre conforme aux limites d'expositionaux RF d'IC dans des conditions d'exposition a des appareils mobiles (les antennes sesituent a moins de 20 cm du corps d'une personne).

Navigation menu