LITE ON TECHNOLOGY KB27RF004 Wireless Keyboard User Manual KB 7361 eng

Lite-on Technology Corp. Wireless Keyboard User Manual KB 7361 eng

Manual

LiteON Technology 第 1 頁 共4 頁 User’s ManualProduct Name: Wireless KeyboardModel NO.: SK-7361 (27 MHZ Multi-Channel ) Issue Date: Apr-20- 2006
LiteON Technology 第 2 頁 共4 頁Table of Contents1. Product brief descreption..............................................................................................................22 Hot key function of keyboard...............................................................................................33. USB connector of receiver...................................................................................................31. Product brief descreptionThis is product user’s manual of SK-7361 wireless keyboard and receiver. It is amulti-channels radio (27 MHZ), supports 11 optional channels. Keyboard function includes standard keyboard function and WIN2000 hot keyfunction.Receiver supports the function of receiving from keyboard. It is a USB receiver tobe used as a communication bridge between PC computer and cordless device.Product Outline of SK-7361keyboard / ReceiverKeyboard:Receiver:
LiteON Technology 第 3 頁 共4 頁*Keyboard: Operation Voltage:Voltage supplied to device: 3 VDC (AA battery *2)*Receiver: Operation Voltage:USB bus power +5Vdc2 Hot key function of keyboardThis product offer hot key function of WIN2000.3. USB connector of receiverThe USB interface meets the USB version 1.1specification.4 OperationThe product needs to make pairing with USB receiver before normal application.In general we can use the product directly by the user because the pairing process hasbeen done at manufacturer site. However, the pairing process needs to be done if there isno response from mouse.* How to make pairing (step by step as below process) by user:1. Firstly, press the connect button on receiver for more than 0.5s then release.The LED indictor will be on and flashing with correct procedure. It is a normal statuswhile waiting for pairing.2. Secondly, press the connect button on another remote device and release button.3. Thirdly, check the LED status of the receiver. It should flash quickly and then turn off.Its means the pairing process have completely done.4. In order to ensure the pairing work, we need to hit the left/right button or moving mouseto see the response. The LED on the receiver will on when its receive data from remotedevice..* Check the batteries installation, life power and orientation in device if pairing wasunsuccessfully. Repeats pairing process step 1~4 after verify the battery set.5 Radio parameter*Table-1 Parameter of radio partItem/ Parameter PerformanceField operation distance 2.5m for keyboardModulation Scheme GFSK
LiteON Technology 第 4 頁 共4 頁Channel 11 channels (Maximum)RF channel: – 11 channels (programmable)26.995, 27.020, 27.045, 27.07027.095, 27.120, 27.145, 27.17027.195, 27.225, 27.255 (MHZ)Antenna TypeA single wire loop ,put in keyboard inside, along with side edge ofenclosure.Keyboard’s FCC- ID H4IKB27RF004 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.

Navigation menu