LINKSYS WVC54GCA Wireless-G Internet Home Monitoring Camera User Manual Users manual 2

LINKSYS LLC Wireless-G Internet Home Monitoring Camera Users manual 2

Contents

Users manual 2

Chapter 4 Advanced Configuration with the Web-based Utility21Wireless-G Internet Home Monitoring CameraSetup > BasicTheSetup > Basic screen allows you to alter the Camera’s cDevice settings, Network settings, Wireless settings, and Security settings.Setup > Basic ScreencDevice SettingsDevice IDThis is the Camera name that is used by the Camera and the Utility to exchange data.Camera NameYou may assign the Camera any nameup to 15 characters long. Unique, memorable names are helpful, especially if you use multiple Cameras on the same wireless network.DescriptionEnter information about the Camera inthis field. You can enter up to 32 characters.Enable LCD and LED OperationsThis feature allows you to enable or disable the Camera’s LCD and LEDs.Current Date/TimeThis is the Camera’s current dateand time. To change it, click Change, and theSet Date/Time screen appears. To use the computer’s date andtime, click Sync with PC; otherwise, update the dateand time and click Set New Time. Then, click Close.Set Date/Time ScreenTime ZoneSelect the time zone for the Camera’slocation.Adjust for Daylight Saving TimeSelect this to adjustthe Camera’s current time for Daylight Saving Time.NOTE: You must unselect this option whenDaylight Saving Time finishes.•••••••Check hereif you want to update the timeautomatically through the NTP server from the Internet Select this option and fill in the NTP Server Address field if you want the Camera to update its timeat regular intervals by contacting an NTP (Network Time Protocol) server on the Internet.Network SettingsConfiguration TypeIf you want to automaticallyassign the Camera an IP address from a DHCP server, then select Obtain Address Automatically (DHCP). If you want to assign the Camera a static IP address, then selectFixed IP Address, and complete theIP Address,Subnet Mask,kGateway,yyPrimary DNS andSecondary DNS fields.IP Address, Subnet Mask, Gateway, Primary DNS, Secondary DNSComplete these fields if you wantto assign the Camera a static IP address. You need to enter at least one DNS address.Wireless SettingsSSIDEnter the network’s SSID or network name here.Network TypeSelect the network’s mode, Ad-hoc orInfrastructure.Channel NoIf the Camera is set to Ad-hoc mode, select its channel setting from the drop-down menu.SecurityClickEdit Security Settings to display theWireless Securityscreen.ySecurity ModeSelect the appropriate option based on your wireless network configuration.DisabledThis option implements no security on your wireless network. Data is not encrypted before transmission.WEPWEP is a basic encryption method, which is not as secure as later methods such as WPA-Personal or WPA2 Personal. However, it is supported by all clients.Wireless Security > Security Mode > WEPTX KeySelect the number of the key used on the ••••••••
Chapter 4 Advanced Configuration with the Web-based Utility22Wireless-G Internet Home Monitoring Camerawireless network.WEP EncryptionSelect the appropriate option forkey length based on your network settings.PassphraseType in the passphrase used to generateWEP keys on your network and click Generate.Key 1 - Key4Key values can be entered manually orgenerated from a passphrase.AuthenticationSelect the appropriate authenticationtype used on the wireless network.WPA PersonalThis method offers TKIP encryption with dynamic encryption keys.Wireless Security > Security Mode > WPA PersonalWPA AlgorithmThis cannot be modified.WPA Shared KeyEnter the shared key used foraccessing the wireless network.To save your changes, click Apply. To cancel any unsavedchanges, click Cancel. To get additional information about the screen’s features, click Help.Setup > ImageTheSetup > Image screen allows you to alter the Camera’svideo settings.Setup > Image ScreenVideo SettingsImage TypeSelect the desired type:MPEG-4 gives smooth motion and high qualityimages, but the video image quality willdeteriorate if sufficient bandwidth is not available. MJPEG requires more bandwidth than MPEG-4, but if the bandwidth is insufficient, the frame rate will drop while image quality remains at the same level.•••••••••ResolutionSelect the resolution you want for viewingor recording the Camera’s video. Select640*480 for thehighest resolution, 320*240 for medium resolution,and select 160*128 for the lowest resolution.Video Quality ControlSelect eitherFixed Bit Rate or Fixed Quality for the video stream.Fixed Bit RateSelect the bit rate you want forviewing or recording the Camera’s video. The range varies from64 Kbps to1.2 Mbps.Fixed QualitySelect the level of quality you want for viewing or recording the Camera’s video. The range varies from Very Low toVery High.It may be helpful to know what the bit rates are for video viewing or recording at different resolutions and image quality levels. The following table lists these estimated bit rates.Estimated Bit Rates for Video Viewing or RecordingResolutionQuality LevelBit Ratein kbps640 x 480Very High4000640 x 480High3200640 x 480Normal1200640 x 480Low480640 x 480Very Low160320 x 240Very High1000320 x 240High800320 x 240Normal300320 x 240Low120320 x 240Very Low40160 x 128Very High800160 x 128High400160 x 128Normal200160 x 128Low100160 x 128Very Low40NOTE:Video quality and/or performance maybe affected by the number of users connected to the Camera.Max Frame RateSelect the maximum frame ratefor the camera. Reducing this lowers the amount of bandwidth required by the camera. Power Line FrequencySelect the power line frequency(50Hz or60Hz) used in your region, to improve thepicture quality under fluorescent lighting.AdjustmentsColor Balance Select the desired option to match thecurrent environment and lighting.•••••••
Chapter 4 Advanced Configuration with the Web-based Utility23Wireless-G Internet Home Monitoring CameraExposureIf necessary, you can adjust the exposure to obtain a better image. For example, if the camera is facing minimal light, the image may be too dark. In this case, you can increase the exposure.SharpnessSelect the desired option for the sharpness. You can select a Sharpness value between -3 and3.OptionsFlip Image/Mirror ImageTheFlip option rotatesthe image 180° vertically; theMirror option rotatesthe image 180° horizontally. If the camera is mounted upside-down on the ceiling, select both Flip andMirror to rotate the image to the correct position.Enable MicrophoneSelect this to enable audio.Using Audio increases the bandwidth requirements slightly.Enable Time StampSelect this to display a timestamp on the video.Enable Text DisplayTo display text on the video, select this, then enter up to 20 characters in the field.To save your changes, click Apply. To cancel any unsavedchanges, click Cancel. To get additional information about the screen’s features, click Help.Setup > MaintenanceTheSetup > Maintenance screen allows you to reset theCamera’s factory defaults and upgrade the firmware.Setup > Maintenance ScreenRestore Factory DefaultsRestore DefaultsTo restore the Camera to its factory default settings, click Restore Defaults.NOTE: This will overwrite the Camera’s settingswith the factory defaults. Any changes you madeto the Camera’s settings will be lost; you will notbe able to recover them unless you saved themas described in “Configuration” below.•••••••RestartRestartTo restart the Camera, click Restart.Firmware UpgradeUpgrade FirmwareNew firmware versions are posted atwww.linksys.com and can be downloaded for free.If the Camera is functioning satisfactorily, there is no need to download a newer firmware version, unless that version has a new feature that you want to use.Loading new firmware onto the Camera does not always enhance its performance.Linksys recommends that you upgrade the Camera’s firmware within your network; in other words, use acomputer within the Camera’s local network. If you attempt to upgrade the Camera’s firmware from a remote location—using a computer outside of the Camera’s local network—the upgrade will fail.To upgrade the firmware:Go to the Linksys website, www.linksys.com,and download the firmware upgrade file for the Camera. Then extract the file. From theSetup > Maintenance screen, click Upgrade Firmware.You will see the Upgrade Firmware screen. Click Browse to find the extracted file, and then double-click it.ClickStart Upgrade, and follow the on-screen instructions. To cancel the upgrade, click Cancel.For further help, click Help.ConfigurationSave ConfigurationSelect this to save the Camera’scurrent configuration to your computer, so that you can recover these settings at a later time.Upload ConfigurationSelect this to upload theCamera’s configuration from a file on your computer. Enter the file’s location and name in the field, or click Browse to locate the file on your computer.Setup > UsersTheSetup > Users screen lets you set the user name and password for the Camera’s administrator and users, as well as designate access rights for the users.••1.2.3.4.••
Chapter 4 Advanced Configuration with the Web-based Utility24Wireless-G Internet Home Monitoring CameraSetup > Users ScreenAdministratorUse this to set the user name and password of the Camera administrator.AdminEnter the administrator’s name in the first field, then enter the password in the second and third fields. Then, click Change to set the information.User ListUse this to set each user’s name and password and to assign each user’s access rights.User Name Enter the user’s name.Password, Confirm PasswordEnter the password in both fields.Pan/TiltSelect this option to grant the user access tothe Pan/Tilt options.SetupSelect this option to allow the user toconfigure the camera without having to grant the user administrator rights.ClickAdd to set the user’s information.To save your changes, click Apply. To cancel any unsavedchanges, click Cancel. To get additional information about the screen’s features, click Help.Setup > DDNSTheSetup > DDNS screen allows you to set up and configure your DDNS Service. DDNS (Dynamic Domain Name System) lets you assign a fixed host and domain name to a dynamic Internet IP address. If you have already set up your SoloLink account, then you can use this screen to register additional Cameras.•••••Setup > DDNS ScreenEnable DDNSSelect this option to enable a DDNS service with the Camera.Service ProviderSelect your DDNS service providerfrom this drop-down menu. Your selection willdetermine the options that are displayed in the rest of the screen.SoloLink DDNSUsername Enter the username you have set up on your SoloLink account. If you are a new user, click New User? - Click here to Register. TheNew User Registration screen will appear. Click Continue tocontinue, or click Back to return to the previouskscreen. Your web browser will automatically start up,and you will visit a website to set up your SoloLink account. Follow the on-screen instructions. For more information, refer to “Chapter 6: Setting up the Linksys SoloLink DDNS Service,” which will guide you through setup of your SoloLink account.PasswordEnter the password you have set up onyour SoloLink account. If you have forgotten yourpassword, click Forgot your Password?ThePassword Request screen will appear. Complete the tDomain name field. Click Continue and your usernameand password will be e-mailed to the e-mail address registered with your SoloLink DDNS account. Click Cancel to cancel your change. Click Backto return tokthe previous screen.Your DomainEnter the host and domain name youhave set up on your SoloLink account. It should be in this format:<Location ID>.ourlinksys.com. Forexample, if myhouse is the Location ID, then the host and domain name would bemyhouse.ourlinksys.com.Device NameEnter the name you gave the Camera.WAN PortEnter the number of the port you will useto remotely access the Camera. If you need to find an available port, click Find Available Port and follow the on-screen instructions.•••••••
Chapter 4 Advanced Configuration with the Web-based Utility25Wireless-G Internet Home Monitoring CameraNOTE:If you use the Camera’s DDNS feature,then you must also configure the port forwarding feature on your network router. Gotowww.linksys.com/portfwd for instructionson how to configure a Linksys router. For other routers, refer to your router’s documentation.DDNS Service Update Depending on how oftenyou want the DDNS service to update the dynamic IP address, select the appropriate time interval from the drop-down menu. To update the dynamic IP address immediately, click Update Now.StatusRegistration StatusThis displays your SoloLink registration status.Address Update StatusThis indicates the status of your address update.Last Update AttemptThis shows when the lastaddress update attempt was made.Last Successful UpdateThis shows when the lastsuccessful address update was made.OptionsTo login to your SoloLink account, click DDNS Account. To remove the Camera from the DDNS service, click Remove Camera.DDNSThe following options appear if you select DynDNS orTOZ as your DDNS Service Provider. Use these to set upand manage your DDNS service.Host NameEnter the Host Name.AccountEnter your DDNS account name.PasswordEnter your password.Check WAN IP AddressSelect how often you want the DDNS service to check the WAN IP address, and specify the time to start checking.To save your changes, click Apply. To cancel any unsavedchanges, click Cancel. To get additional information about the screen’s features, click Help.••••••••••Setup > FTP UploadTheSetup > FTP Upload screen allows you to manage dimages uploaded to an FTP server.Setup > FTP Upload ScreenEnable FTP UploadSelect this option to enable theFTP Upload feature. If enabled, you must enter the details for the FTP Server.Primary FTP Server Enter the name or IP address of the Primary FTP Server.Login NameEnter the Login name required to access the FTP server.PasswordEnter the password for FTP server access.PortEnter the Port number required to gain access tothe FTP server.Enable Passive ModeSelect this option to enablethe Passive Mode feature as required.File PathnameEnter the desired pathname here. Upload to the secondary FTP if the camera cannotconnect to the primary FTPTo upload to a secondary FTP Server when the Camera cannot connect to the Primary FTP Server, select this option, then enter the following details for the Secondary FTP Server.Secondary FTP Server, Login Name, Password,PortEnter the Secondary FTP Server’s name or IP address, login name, password, and port number. Enable Passive ModeSelect this option to enablethe Passive Mode feature as required.File PathnameEnter the desired pathname here. PhotoEnter the desired number of photo shots here. Up to four snapshots can be uploaded per interval.Upload IntervalSelect the desired option for the upload interval.To save your changes, click Apply. To cancel any unsavedchanges, click Cancel. To get additional information about the screen’s features, click Help.•••••••••••••
Chapter 4 Advanced Configuration with the Web-based Utility26Wireless-G Internet Home Monitoring CameraSetup > OptionsTheSetup > Options screen allows you to alter the Camera’s e-mail alert features, UPnP configuration, and Alternate Port settings.Setup > OptionsScreenE-mail AlertYou can choose to be notified when the Camera detects motion in its field of view. You will be sent a text-onlye-mail or an e-mail with video attached.NOTE:Motion detection can be triggered byrapid changes in lighting condition, as well as by moving objects. For this reason, it shouldonly be used indoors.Enable E-mail AlertSelect this option to be notified by e-mail when the Camera detects motion.Send toEnter up to three e-mail addresses that will receive e-mail alerts.Show “From” asEnter the text that you want displayedin theFrom field of any e-mail alert message.SubjectEnter the Subject for the e-mail alerts.SMTP Mail ServerEnter the IP address of the outgoing mail SMTP server. If it requires authentication, selectMy Mail Server Requires Authentication, and fill intheAccount Name and Password fields.dPan/TiltThis option is only available if your camerais fitted with a Pan/Tilt control. If available, select the desired option to resolve conflict between the Pan/Tilt and Motion Detection features.Delay between E-mailsEnter the minimum time interval between e-mail alerts. The default is 2 minutes.E-Mail VideoSelect Enable from the drop-down boxto have a video clip attached to each e-mail alert. Then select the video clip length, up to a maximum of 5 seconds. The default is 2 seconds. SelectDisable fromthe drop-down box if you want the Camera to sendtext-only e-mail alerts.••••••••Area/SensitivityClick this button to enter themotion detection sub-screen. You can set the area or areas of the video image to be examined, and adjust the sensitivity of detection for each area. UPnPEnable UPnPWhen enabled, the Camera’s UniversalPlug and Play (UPnP) feature allows a UPnP-enabled computer to easily detect the Camera. The Camera’s UPnP feature is disabled by default. If your computer is UPnP-enabled, select this option.Alternate PortEnable Alternate Port If you want the Camera tobe able to use an alternate port for communications, select this option. Then, enter the desired port number in the range from 1024 to65534in thePort Numberfield. The default port number is 1024.If you already have a Web Server on your LAN, then you should enable the Alternate Port and use this port number instead of port 80.RTP/RTSPRTSP PortTo change the RTSP Port number, enter the desired number in the range of 1024 to65535. Thedefault is 554.RTP Data PortTo change the RTP Data Port, enter the desired number in the range of 1024 to65535.Max RTP Data PacketTo change the maximum length of RTP data packets, enter the desired maximum length in the range of 400 to1400.To save your changes, click Apply. To cancel any unsavedchanges, click Cancel. To get additional information about the screen’s features, click Help.••••••
Chapter 4 Advanced Configuration with the Web-based Utility27Wireless-G Internet Home Monitoring CameraSetup > Pan/TiltTheSetup > Pan/Tilt screen allows you to manage the tCamera’s preset positions as well as the pan and tilt.Setup > Pan Tilt ScreenSet PresetPosition buttonsUse these buttons to adjust the Camera’s position.CalibrationClick this button to reset the calibration of the Pan/Tilt area.Set HomeTo set the Home position, set the Camera to the desired position and then click Set Home.Current PositionTo save the current position as a Preset Position, enter the desired name for the position and click Add.Preset PositionTo delete a preset position, select it from the drop-down box and click Delete.Pan/Tilt ControlPan/Tilt MovementSelectOn if you want to use thePan/Tilt Movement feature, otherwise select Off.Default Home PositionClickReset to reset theDefault Home Position.Rotation SequenceThis feature determines how the camera will move when it is set toRotate. You create a list of Preset Positions; the Camera will go to the first position in the list, then to each subsequent position, stopping at each position for the specified length of time. The Camera will stop moving when it reaches the last position in the list.To create the Rotation Sequence, select the desired PresetPosition in thePreset column, select the desired time totremain at this position from the Time drop-down box,and click Add >>. Repeat until the desired sequence is complete.To delete a position from the Sequence, select the desired position and click Delete.•••••••To save your changes, click Apply. To cancel any unsavedchanges, click Cancel. To get additional information about the screen’s features, click Help.Setup > StatusTheSetup > Status screen allows you to view the Camera’sstatus information and log.Setup > Status ScreenSystem StatusFirmware VersionThe version of the current firmwareinstalled.MAC AddressThe MAC Address of the Camera is displayed here.Camera NameThe name you gave to the Camera isdisplayed here.DescriptionInformation about the Camera, such aslocation, is displayed here.Date/TimeThe current date and time are shownhere.ImageImage Type This displays the compression type of the video stream.ResolutionThis displays the image size of the video stream.Image QualityThis displays the image quality of thevideo stream.NetworkNetwork TypeThe wireless network’s mode is shown here.IP AddressThe Camera’s IP Address is displayed here.Subnet MaskThe Camera’s Subnet Mask is shown here.GatewayThe Camera’s Gateway address is displayed••••••••••••
Chapter 4 Advanced Configuration with the Web-based Utility28Wireless-G Internet Home Monitoring Camerahere.Primary DNS, Secondary DNSThe IP addresses of the Primary DNS and Secondary DNS are displayedhere.WirelessSSIDThe wireless network’s SSID or name is shown here.ChannelThe wireless network’s channel setting is displayed here.SecurityThe wireless network’s encryption level isshown here.SyslogSyslog Server Select this option to enable the Syslog feature, then enter the address of the Syslog Server. This feature allows the Camera to upload system log files to a Syslog Server.LogSystem LogThis shows the Camera’s activities. To empty the log, click Clear Log.To get the Camera’s most up-to-date information, click Refresh. To get additional information about the screen’s features, click Help.••••••HelpThrough theHelp screen, you’ll find links to additional resources for the Camera and its Utility. If you select the Help tab directly from the Welcome screen, then you will see theUser Help screen and will only be able to access these resources. If you first log in to access the Camera’s Setup and then select theHelp tab, you will see the Administrator Help screen and will be able to restore factory defaults and upgrade the Camera’s firmware.Setup > Help ScreenSetupClick any of the topics in the bar on the left to get help information.Linksys Support Page - Download Latest Viewer/Recorder UtilityClick this link to download the most recent version of the Camera Utility from the Linksys website, www.linksys.com.Click here to learn how to configure Port Forwardingin your Linksys Router If you are going to use the SoloLink DDNS Service, you need to set up port forwarding on your router. For instructions on how to configure a Linksys router, click this link. If you have adifferent router, refer to your router’s documentation.Adobe website (software for viewing PDFdocuments)If you do not have Adobe Acrobat Reader, click this link to download it.••••
Appendix A Troubleshooting29Wireless-G Internet Home Monitoring CameraAppendix A:TroubleshootingThis appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” This appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G Internet Home Monitoring Camera. Read the description below to solve your problems. If you can’t find an answer here, check the Linksys website at www.linksys.com.Common Problems and SolutionsI can’t view the Camera’s video using Internet Explorer.Make sure the OCX plug-in was correctly installed. If you’re not sure, re-install the plug-in by following these instructionsOn theWelcome screen of the Camera’s Web-based Utility, click View Video.A screen mentioning a security warning about an OCX plug-in will appear. Click Yes to allow the plug-in to be installed.You should then be able to view the Camera’s streaming video.If you still cannot view the video, make sure you have the rights to install the plug-in in your PC’s Internet Explorer. If not, log into your computer as anadministrator and install the plug-in.Then you can check if the OCX plug-in has been installed. Follow these instructions:From Internet Explorer, go to Tools andInternetOptions.On the General screen, click Settings underTemporary Internet files.ClickView Objects. You should see a file named NetCamPlayerWeb Control installed.The OCX plug-in is installed in Internet Explorer, but I cannot view any video.Make sure Microsoft Internet Explorer 5.5 or higher is installed. Then delete the OCX plug-in by following these instructions:From Internet Explorer, go to Tools andInternetOptions.On the General screen, click Settings underTemporary Internet files.ClickView Objects.You should see a file named NetCamPlayerWeb Control installed. Delete this file from the list.••••••••••The next time you click View Video from the webbrowser, you will be prompted to re-install the OCX plug-in.When powering on the Camera, I can’t immediately access the Camera from my computer.Make sure the Camera’s LED is continuously lit. When it is flashing, the Camera is initializing.I’m not able to play my recording video les.Make sure you have Microsoft Windows Media Player 7 or higher. If you don’t, you can download the latest version from www.microsoft.com.I have two Cameras and see two WVC54GCAs listed in my Camera Utility. When I click to view both Cameras, I see the video of only one Camera.Make sure that the Cameras have different camera or device names. You can change this by using the Web-based Utility or running the Setup Wizard. If you use the Web-based Utility, log in and click the Setup tab. Then on the Basic screen, change the Camera Name.I want to set up an account with the SoloLink DDNS Service, but I can’t access the SoloLink website to sign up.Make sure the Camera is properly configured on your local network. Then check to see if your PC and Camera are properly connected and your network has an active Internet connection.When I view video remotely via the Internet, the video is very slow.Video performance is greatly affected by your Internetconnection speed. You can lower the Camera’s image quality to speed up the video. Through the Camera’s Web-based Utility, click theSetup and Image tabs, andthen lower the image quality on the Image screen.I cannot access the Setup tab of the Camera’s Web-based Utility.Make sure you have administrator rights. Only anadministrator can change the Camera’s settings.I want to access the Camera when I’m away from home, but somehow I can’t connect.If your network uses a dynamic IP address supplied by your ISP, then the IP address you use to reach the Camera will change as well. You need to use the Linksys SoloLink DDNS Service, so you can access the Camera using its domain name while the service keeps track of •
Appendix A Troubleshooting30Wireless-G Internet Home Monitoring Camerathe IP address changes. To set up a Dynamic Domain Name Service (DDNS) account, click the Setup tab of the Camera’s Web-based Utility. Click theSoloLinkDDNS tab. If you are a new user, click New User? - Clickhere to Register. Follow the on-screen instructions.You can also set up the Linksys SoloLink DDNS Service by inserting the Setup CD-ROM into your PC’s CD-ROM drive. Click theSetup SoloLink DDNS Service button,and follow the on-screen instructions. For moreinformation, see “Chapter 7: Setting up the Linksys SoloLink DDNS Service.”Important: To allow remote access to the Camera, you will also have to use the port forwarding feature on your network router.I already set up my SoloLink DDNS account, but I can’t access the Camera from a remote location.Follow these instructions:When you enter the Camera’s domain name, make sure it is in this format:http://<Device Name>.<Location ID>.ourlinksys.comThe <Device Name> is the name you gave the Camera when you ran the Setup Wizard. The <Location ID> is the name you selected when you set up your SoloLink DDNS account.If the Camera is set to DHCP, make sure your localnetwork is working properly and your router has an active Internet connection.If the Camera uses a static IP address, insert the Setup CD-ROM into your network PC’s CD-ROMdrive. Click theSetup button and follow the on-screen instructions. When you see the IP Settings screen, make sure the Camera’s Default Gateway and Primary DNS addresses are correct.For more information, refer to the Camera’s Quick Installation Guide.Frequently Asked QuestionsCan I view video using a Macintosh or Netscape Navigator?The Camera is designed for computers running a Windows operating system and Internet Explorer 5.5or higher. You cannot view video on a Macintosh. If you only have Netscape, you can view video using the Camera Utility. See “Chapter 3: Installing and Using the Camera Utility.”Can I directly connect the Camera to wired and wireless networks at the same time?No. Before powering on the Camera, you should •••decide if you want to connect the Camera to a wireless network via an access point or to a wired network. If your wireless and wired networks are bridged, then you can access the Camera from any networkedcomputer, but the Camera must be directly connected to only one of the networks.To connect the Camera to a wireless network, poweron the Camera with no network cable attached. The Camera will be ready for use when the LED is lit continuously.To connect the Camera to a wired network, connect the network cable to the Camera, and then power it on. The Camera will be ready for use when the LED is lit continuously.Can I install the Camera outdoors?No, the Camera was not designed for outdoors usage.I’ve recorded video for a few hours.Why do I see multiple les saved on my computer?The recording function saves video in chunks; each chunk is a maximum of one hour in duration. For example, if you have recorded five continuous hours, then you will see five files saved on your computer. This keeps files from getting too large.Do I need to install the Linksys Multi-Camera Viewer and Recorder Utility?Installation is optional. You can view video using Microsoft Internet Explorer 5.5 or higher. If you don’t want to use the recording function, then you don’t need to install the Multi-Camera Viewer and Recorder Utility.Where can I nd more information about the Linksys SoloLink DDNS Service?You can go to www.linksys.com/sololink for more information.Can I specify who gets to view the Camera’s video?Yes. Access the Camera’s Web-based Utility, and click the Setup tab. After you log in, click the Users tab.You will be able to restrict access to users you have entered in the database. See “Chapter 4: Advanced Configuration with the Web-based Utility.”Can I add a time stamp to the video?Yes. Access the Camera’s Web-based Utility, andclick the Setup tab. After you log in, click the Image tab. You will be able to add a time stamp as well as descriptive text to the video. See “Chapter 4: Advanced Configuration with the Web-based Utility.”
Appendix A Troubleshooting31Wireless-G Internet Home Monitoring CameraHow many users can view the Camera’s video at the same time?Users at four different PCs can simultaneously view the Camera’s video.What is the IEEE 802.11b standard?It is one of the IEEE standards for wireless networks. The 802.11b standard allows wireless networking hardware from different manufacturers to communicate, provided that the hardware complies with the 802.11b standard. The 802.11b standard states a maximum data transfer rate of 11Mbps and an operating frequency of 2.4GHz.What is the IEEE 802.11g standard?It is one of the IEEE standards for wireless networks. The 802.11g standard allows wireless networking hardware from different manufacturers to communicate, provided that the hardware complies with the 802.11gstandard. The 802.11g standard states a maximum data transfer rate of 54Mbps and an operating frequency of 2.4GHz.What IEEE 802.11b features are supported?The product supports the following IEEE 802.11b functions:CSMA/CA plus Acknowledge protocolMulti-Channel Roaming Automatic Rate SelectionRTS/CTS feature •FragmentationPower ManagementWhat IEEE 802.11g features are supported?The product supports the following IEEE 802.11g functions:CSMA/CA plus Acknowledge protocolOFDM protocolMulti-Channel Roaming Automatic Rate SelectionRTS/CTS featureFragmentationPower ManagementWhat is ad-hoc mode?When a wireless network is set to ad-hoc mode, thewireless-equipped computers are configured to communicate directly with each other. The ad-hoc wireless network will not communicate with any wired network.••••••••••••What is infrastructure mode?`When a wireless network is set to infrastructure mode, the wireless network is configured to communicatewith a wired network through a wireless access point or router.WEB:If your questions are not addressed here, refer to the Linksys website, www.linksys.com
Appendix B Wireless Security Checklist32Wireless-G Internet Home Monitoring CameraAppendix B:Wireless Security ChecklistWireless networks are convenient and easy to install, so homes with high-speed Internet access are adopting them at a rapid pace. Because wireless networking operates by sending information over radio waves, it can be more vulnerable to intruders than a traditional wired network. Like signals from your cellular or cordless phones, signals from your wireless network can also be intercepted. Since you cannot physically prevent someone from connecting to your wireless network, you need to take some additional steps to keep your network secure.1.Change the default wirelessnetwork name or SSIDWireless devices have a default wireless network nameor Service Set Identifier (SSID) set by the factory. This is the name of your wireless network, and can be upto 32 characters in length. Linksys wireless products uselinksys as the default wireless network name. You should change the wireless network name to something unique to distinguish your wireless network from other wireless networks that may exist around you, but do not use personal information (such as your Social Security number) because this information may be available for anyone to see when browsing for wireless networks.2. Change the default passwordFor wireless products such as access points, routers, and gateways, you will be asked for a password when you want to change their settings. These devices have a default password set by the factory. The Linksys default password isadmin. Hackers know these defaults and may try to use them to access your wireless device and change your network settings. To thwart any unauthorized changes, customize the device’s password so it will be hard to guess.3.Enable MAC address filteringLinksys routers and gateways give you the ability to enable Media Access Control (MAC) address filtering. TheMAC address is a unique series of numbers and letters assigned to every networking device. With MAC addressfiltering enabled, wireless network access is provided solely for wireless devices with specific MAC addresses. For example, you can specify the MAC address of each computer in your home so that only those computers can access your wireless network.4. Enable encryptionEncryption protects data transmitted over a wireless network. Wi-Fi Protected Access (WPA/WPA2) and Wired Equivalency Privacy (WEP) offer different levels of security for wireless communication.A network encrypted with WPA/WPA2 is more securethan a network encrypted with WEP, because WPA/WPA2 uses dynamic key encryption. To protect the information as it passes over the airwaves, you should enable the highest level of encryption supported by your network equipment.WEP is an older encryption standard and may be the only option available on some older devices that do not support WPA.General Network Security GuidelinesWireless network security is useless if the underlying network is not secure.Password protect all computers on the network and individually password protect sensitive files.Change passwords on a regular basis.Install anti-virus software and personal firewall software.Disable file sharing (peer-to-peer). Some applications may open file sharing without your consent and/orknowledge.Additional Security TipsKeep wireless routers, access points, or gateways away from exterior walls and windows.Turn wireless routers, access points, or gateways off when they are not being used (at night, during vacations).Use strong passphrases that are at least eight characters in length. Combine letters and numbers to avoid using standard words that can be found in the dictionary. WEB: For more information on wirelesssecurity, visitwww.linksys.com/security•••••••
Appendix C Specifications33Wireless-G Internet Home Monitoring CameraAppendix C:SpecificationsModelWVC54GCAStandardsIEEE 802.11b, IEEE 802.11gPortsOne 10/100 Auto-Crossover (MDI/MDI-X) port, Power portProtocolsTCP/IP, HTTP, DHCP, NTP, SMTP, UPnP(Discovery only)ButtonOne Reset ButtonCabling TypeRJ-45LEDsPowerSecurity Features User Authentication,WEP/WPA-PSK,Motion DetectionWEP Key Bits64/128 BitImage SensorCMOSLensFixed FocusResolution320 x 240, 160 x 128Relative Illumination 5.1 LuxEective Focus3 mmSensitivity1.0V/Lux-secField of View61.48 degreesCompressionAlgorithmMPEG-4Record File FormatASFBrightnessAuto/Manual AdjustmentEnvironmentalDimensions 3.54" x 4.02" x 1.46" (W x H x D)(90 x 102 x 37mm)Weight0.29 lb (0.13 kg)Power5V DC ExternalCerticationFCCOperating Temp.32 to 104ºF (0 to 40ºC)Storage Temp. 14 to 158ºF (–10 to 70ºC)Operating Humidity 10 to 85% Relative Humidity, NoncondensingStorage Humidity5 to 90% Noncondensing
Appendix D Warranty Information34Wireless-G Internet Home Monitoring CameraLimited WarrantyLinksys warrants to You that, for a period of one year (the "Warranty Period"), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys’ entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates. This limited warranty extends only to the original purchaser.If the Product proves defective during the WarrantyPeriod call Linksys Technical Support in order to obtain a Return Authorization Number, if applicable. BE SURE TO HAVE YOUR PROOF OF PURCHASE ON HAND WHEN CALLING. If You are requested to return the Product, mark the Return Authorization Number clearly on the outside of the package and include a copy of your original proof of purchase. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. You are responsible for shipping defective Products to Linksys. Linksys pays for UPS Ground shipping from Linksys back to You only. Customers located outside of the United States of America and Canada are responsible for all shipping and handling charges.ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OFTHE WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to You. This warranty gives You specific legal rights, and You may also have other rights which vary by jurisdiction.This warranty does not apply if the Product (a) has been altered, except by Linksys, (b) has not been installed,operated, repaired, or maintained in accordance with instructions supplied by Linksys, or (c) has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident. In addition, due to the continual development of new techniques for intruding upon and attacking networks, Linksys does not warrant that the Product will be free of vulnerability to intrusion or attack.TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT (INCLUDING ANY SOFTWARE), EVEN IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL LINKSYS’ LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. The foregoing limitations will apply even if any warranty or remedy provided under this Agreement fails of its essential purpose. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to You.Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine, CA 92623.Appendix D:Warranty Information
Appendix E Regulatory Information35Wireless-G Internet Home Monitoring CameraAppendix E:Regulatory InformationFCC StatementThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference byone or more of the following measures:Reorient or relocate the receiving antennaIncrease the separation between the equipment or devicesConnect the equipment to an outlet other than the receiver’sConsult a dealer or an experienced radio/TV technician for assistanceFCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11.••••Safety NoticesCaution: To reduce the risk of fire, use only No.26 AWGor larger telecommunication line cord.Do not use this product near water, for example, in a wet basement or near a swimming pool.Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.WARNING: This product contains lead, knownto the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.Industry Canada StatementThis Class B digital apparatus complies with Canadian ICES-003 and RSS210.Operation is subject to the following two conditions:This device may not cause interference andThis device must accept any interference, including interference that may cause undesired operation of the device. This device has been designed to operate withan antenna having a maximum gain of 2dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the EIRP is not more than required for successful communication.Industry Canada Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.•••1.2.
Appendix E Regulatory Information36Wireless-G Internet Home Monitoring CameraAvis d’Industrie CanadaCet appareil numérique de la classe B est conforme aux normes NMB-003 et RSS210 du Canada.L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes :il ne doit pas produire de brouillage etil doit accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Le dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximum de 2 dBi. Les règlements d’Industrie Canada interdisent strictement l’utilisation d’antennes dont le gain est supérieur à cette limite. L’impédance requise de l’antenne est de 50 ohms. Afin de réduire le risque d’interférence aux autresutilisateurs, le type d’antenne et son gain doivent être choisis de façon à ce que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne soit pas supérieure au niveau requis pour obtenir une communication satisfaisante.Avis d’Industrie Canada concernant l’expositionaux radiofréquences :Ce matériel est conforme aux limites établies par IC en matière d’exposition aux radiofréquences dans un environnement non contrôlé. Ce matériel doit être installé et utilisé à une distance d’au moins 20 cm entre l’antenne et le corps de l’utilisateur.L’émetteur ne doit pas être placé près d’une autre antenne ou d’un autre émetteur, ou fonctionner avec une autreantenne ou un autre émetteur.Wireless DisclaimerThe maximum performance for wireless is derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction,operating system used, mix of wireless products used, interference and other adverse conditions.1.2.Avis de non-responsabilité concernant lesappareils sans filLes performances maximales pour les réseaux sans fil sont tirées des spécifications de la norme IEEE 802.11. Les performances réelles peuvent varier, notamment en fonction de la capacité du réseau sans fil, du débit de la transmission de données, de la portée et de la couverture. Les performances dépendent de facteurs, conditions et variables multiples, en particulier de la distance par rapport au point d’accès, du volume du trafic réseau, des matériaux utilisés dans le bâtiment et du type de construction, du système d’exploitation et de la combinaison de produits sans fil utilisés, des interférences et de toute autre condition défavorable.
Appendix E Regulatory Information37Wireless-G Internet Home Monitoring CameraUser Information for Consumer ProductsCovered by EU Directive 2002/96/EC onWaste Electric and Electronic Equipment(WEEE)This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol:English - Environmental Information for Customersinthe European UnionEuropean Directive 2002/96/EC requires that the equipmentbearing this symbol on the product and/or its packaging mustnot be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separatelyfrom regular household waste streams. It is your responsibility todispose of this and other electric and electronic equipment via designated collection facilities appointed by the government orlocal authorities. Correct disposal and recycling will help preventpotential negative consequences to the environment andhuman health. For more detailed information about the disposal of your old equipment, please contact your local authorities,waste disposal service, or the shop where you purchased theproduct.Български (Bulgarian) - Информация относноопазването на околната среда за потребители в Европейския съюзЕвропейска директива 2002/96/EC изисква уредите, носещитози символ върху изделието и/или опаковката му, да не се изхвърля т с несортирани битови отпадъци. Символътобозначава, че изделието трябва да се изхвърля отделно отсметосъбирането на обикновените битови отпадъци. Вашае отговорността този и другите електрически и електронниуреди да се изхвърлят в предварително определени отдържавните или общински органи специализирани пунктовеза събиране. Правилното изхвърляне и рециклиранеще спомогнат да се предотвратят евентуални вредни заоколната среда и здравето на населението последствия. Запо-подробна информация относно изхвърлянето на вашитестари уреди се обърнете към местните власти, службите засметосъбиране или магазина, от който сте закупили уреда.Ceština (Czech) -Informace o ochraně životníhoprostředí pro zákazníky v zemích Evropské unieEvropská směrnice 2002/96/ES zakazuje, aby zařízení označenétímto symbolem na produktu anebo na obalu bylo likvidováno s netříděným komunálním odpadem. Tento symbol udává,že daný produkt musí být likvidován odděleně od běžnéhokomunálního odpadu. Odpovídáte za likvidaci tohoto produktua dalších elektrických a elektronických zařízení prostřednictvímurčených sběrných míst stanovených vládou nebo místnímiúřady. Správná likvidace a recyklace pomáhá předcházetpotenciálním negativním dopadům na životní prostředí a lidské zdraví. Podrobnější informace o likvidaci starého vybavení silaskavě vyžádejte od místních úřadů, podniku zabývajícího selikvidací komunálních odpadů nebo obchodu, kde jste produkt zakoupili.Dansk (Danish) - Miljøinformation for kunderi EUEU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol på produktet og/eller emballagen ikke må bortskaffes somusorteret kommunalt affald. Symbolet betyder, at dette produktskal bortskaffes adskilt fra det almindelige husholdningsaffald.Det er dit ansvar at bortskaffe dette og andet elektrisk ogelektronisk udstyr via bestemte indsamlingssteder udpegetaf staten eller de lokale myndigheder. Korrekt bortskaffelseog genvinding vil hjælpe med til at undgå mulige skader formiljøet og menneskers sundhed. Kontakt venligst de lokalemyndigheder, renovationstjenesten eller den butik, hvor duhar købt produktet, angående mere detaljeret information ombortskaffelse af dit gamle udstyr.Deutsch (German) - Umweltinformation für Kundeninnerhalb der Europäischen UnionDie Europäische Richtlinie 2002/96/EC verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mitdiesem Symbol versehen ist , nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrenntentsorgt werden sollte. Es liegt in Ihrer Verantwortung, diesesGerät und andere elektrische und elektronische Geräte überdie dafür zuständigen und von der Regierung oder örtlichenBehörden dazu bestimmten Sammelstellen zu entsorgen.Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei,potentielle negative Folgen für Umwelt und die menschlicheGesundheit zu vermeiden. Wenn Sie weitere Informationen zurEntsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte andie örtlichen Behörden oder städtischen Entsorgungsdiensteoder an den Händler, bei dem Sie das Produkt erworben haben.
Appendix E Regulatory Information38Wireless-G Internet Home Monitoring CameraEesti (Estonian) - KeskkonnaalaneinformatsioonEuroopa Liidus asuvatele klientideleEuroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt onseadmeid, millel on tootel või pakendil käesolev sümbol,keelatud kõrvaldada koos sorteerimata olmejäätmetega. Seesümbol näitab, et toode tuleks kõrvaldada eraldi tavalistestolmejäätmevoogudest. Olete kohustatud kõrvaldama käesolevaja ka muud elektri- ja elektroonikaseadmed riigi või kohalikeametiasutuste poolt ette nähtud kogumispunktide kaudu.Seadmete korrektne kõrvaldamine ja ringlussevõtt aitab vältidavõimalikke negatiivseid tagajärgi keskkonnale ning inimestetervisele. Vanade seadmete kõrvaldamise kohta täpsemainformatsiooni saamiseks võtke palun ühendust kohalikeametiasutustega, jäätmekäitlusfirmaga või kauplusega, kust tetoote ostsite.Español (Spanish) - Información medioambiental paraclientes de la Unión EuropeaLa Directiva 2002/96/CE de la UE exige que los equipos quelleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos noseleccionados. El símbolo indica que el producto en cuestióndebe separarse de los residuos domésticos convencionales convistas a su eliminación. Es responsabilidad suya desechar este y cualesquiera otros aparatos eléctricos y electrónicos a través delos puntos de recogida que ponen a su disposición el gobierno y las autoridades locales. Al desechar y reciclar correctamente estosaparatos estará contribuyendo a evitar posibles consecuenciasnegativas para el medio ambiente y la salud de las personas. Si desea obtener información más detallada sobre la eliminación segura de su aparato usado, consulte a las autoridades locales,al servicio de recogida y eliminación de residuos de su zona opregunte en la tienda donde adquirió el producto.ξλληνικά (Greek) - Στοιχεία περιβαλλοντικήςπροστασίας για πελάτες εντός της Ευρωπαϊκής ΈνωσηςΗ Κοινοτική Οδηγία 2002/96/EC απαιτεί ότι ο εξοπλισμός ο οποίοςφέρει αυτό το σύμβολο στο προϊόν και/ή στη συσκευασίατου δεν πρέπει να απορρίπτεται μαζί με τα μικτά κοινοτικάαπορρίμματα. Το σύμβολο υποδεικνύει ότι αυτό το προϊόν θαπρέπει να απορρίπτεται ξεχωριστά από τα συνήθη οικιακάαπορρίμματα. Είστε υπεύθυνος για την απόρριψη του παρόντοςκαι άλλου ηλεκτρικού και ηλεκτρονικού εξοπλισμού μέσω τωνκαθορισμένων εγκαταστάσεων συγκέντρωσης απορριμμάτων οιοποίες παρέχονται από το κράτος ή τις αρμόδιες τοπικές αρχές.Η σωστή απόρριψη και ανακύκλωση συμβάλλει στην πρόληψηπιθανών αρνητικών συνεπειών για το περιβάλλον και την υγεία.Για περισσότερες πληροφορίες σχετικά με την απόρριψη τουπαλιού σας εξοπλισμού, παρακαλώ επικοινωνήστε με τις τοπικέςαρχές, τις υπηρεσίες απόρριψης ή το κατάστημα από το οποίοαγοράσατε το προϊόν.Français (French) - Informations environnementalespour les clients de l’Union européenneLa directive européenne 2002/96/CE exige que l’équipementsur lequel est apposé ce symbole sur le produit et/ou sonemballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages. Il est de votreresponsabilité de jeter ce matériel ainsi que tout autre matérielélectrique ou électronique par les moyens de collecte indiquéspar le gouvernement et les pouvoirs publics des collectivitésterritoriales. L’élimination et le recyclage en bonne et due formeont pour but de lutter contre l’impact néfaste potentiel de cetype de produits sur l’environnement et la santé publique. Pourplus d’informations sur le mode d’élimination de votre ancienéquipement, veuillez prendre contact avec les pouvoirs publicslocaux, le service de traitement des déchets, ou l’endroit où vous avez acheté le produit.Italiano (Italian) - Informazioni relative all’ambienteperi clienti residenti nell’Unione EuropeaLa direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/osull’imballaggio non siano smaltite insieme ai rifiuti urbaninon differenziati. Il simbolo indica che questo prodotto nondeve essere smaltito insieme ai normali rifiuti domestici. Èresponsabilità del proprietario smaltire sia questi prodotti siale altre apparecchiature elettriche ed elettroniche mediantele specifiche strutture di raccolta indicate dal governo o daglienti pubblici locali. Il corretto smaltimento ed il riciclaggioaiuteranno a prevenire conseguenze potenzialmente negativeper l’ambiente e per la salute dell’essere umano. Per ricevereinformazioni più dettagliate circa lo smaltimento delle vecchieapparecchiature in Vostro possesso, Vi invitiamo a contattare glienti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto.Latviešu valoda (Latvian) - Ekoloģiskainformācijaklientiem Eiropas Savienības jurisdikcijāDirektīvā 2002/96/EK ir prasība, ka aprīkojumu, kam pievienotazīme uz paša izstrādājuma vai uz tā iesaiņojuma, nedrīkst izmest nešķirotā veidā kopā ar komunālajiem atkritumiem(tiem, ko rada vietēji iedzīvotāji un uzņēmumi). Šī zīme nozīmē to, ka šī ierīce ir jāizmet atkritumos tā, lai tā nenonāktu kopā arparastiem mājsaimniecības atkritumiem. Jūsu pienākums ir šoun citas elektriskas un elektroniskas ierīces izmest atkritumos,izmantojot īpašus atkritumu savākšanas veidus un līdzekļus, konodrošina valsts un pašvaldību iestādes. Ja izmešana atkritumos un pārstrāde tiek veikta pareizi, tad mazinās iespējamaiskaitējums dabai un cilvēku veselībai. Sīkākas ziņas parnovecojuša aprīkojuma izmešanu atkritumos jūs varat saņemtvietējā pašvaldībā, atkritumu savākšanas dienestā, kā arī veikalā,kur iegādājāties šo izstrādājumu.
Appendix E Regulatory Information39Wireless-G Internet Home Monitoring CameraLietuvškai (Lithuanian) - Aplinkosaugosinformacija,skirta Europos Sąjungos vartotojamsEuropos direktyva 2002/96/EC numato, kad įrangos, kuri irkurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį),negalima šalinti kartu su nerūšiuotomis komunalinėmisatliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirainuo bendro buitinių atliekų srauto. Jūs privalote užtikrinti, kadši ir kita elektros ar elektroninė įranga būtų šalinama per tamtikras nacionalinės ar vietinės valdžios nustatytas atliekų rinkimosistemas. Tinkamai šalinant ir perdirbant atliekas, bus išvengtagalimos žalos aplinkai ir žmonių sveikatai. Daugiau informacijosapie jūsų senos įrangos šalinimą gali pateikti vietinės valdžios institucijos, atliekų šalinimo tarnybos arba parduotuvės, kurioseįsigijote tą gaminį.Malti (Maltese) - Informazzjoni Ambjentali għal Klijentifl-Unjoni EwropeaId-Direttiva Ewropea 2002/96/KE titlob li t-tagħmir li jkun fih is-simbolu fuq il-prodott u/jew fuq l-ippakkjar ma jistax jintrema ma’ skart muniċipali li ma ġiex isseparat. Is-simbolu jindikali dan il-prodott għandu jintrema separatament minn ma’ l-iskart domestiku regolari. Hija responsabbiltà tiegħek li tarmidan it-tagħmir u kull tagħmir ieħor ta’ l-elettriku u elettronikupermezz ta’ faċilitajiet ta’ ġbir appuntati apposta mill-gvern jew mill-awtoritajiet lokali. Ir-rimi b’mod korrett u r-riċiklaġġ jgħinjipprevjeni konsegwenzi negattivi potenzjali għall-ambjent ugħas-saħħa tal-bniedem. Għal aktar informazzjoni dettaljatadwar ir-rimi tat-tagħmir antik tiegħek, jekk jogħġbok ikkuntattjalill-awtoritajiet lokali tiegħek, is-servizzi għar-rimi ta’ l-iskart, jewil-ħanut minn fejn xtrajt il-prodott.Magyar (Hungarian) - Környezetvédelmiinformáció azeurópai uniós vásárlók számáraA 2002/96/EC számú európai uniós irányelv megkívánja, hogyazokat a termékeket, amelyeken, és/vagy amelyek csomagolásán az alábbi címke megjelenik, tilos a többi szelektálatlan lakosságihulladékkal együtt kidobni. A címke azt jelöli, hogy az adotttermék kidobásakor a szokványos háztartási hulladékelszállításirendszerektõl elkülönített eljárást kell alkalmazni. Az Önfelelõssége, hogy ezt, és más elektromos és elektronikusberendezéseit a kormányzati vagy a helyi hatóságok általkijelölt gyűjtõredszereken keresztül számolja fel. A megfelelõhulladékfeldolgozás segít a környezetre és az emberi egészségrepotenciálisan ártalmas negatív hatások megelõzésében. Haelavult berendezéseinek felszámolásához további részletesinformációra van szüksége, kérjük, lépjen kapcsolatba a helyihatóságokkal, a hulladékfeldolgozási szolgálattal, vagy azzalüzlettel, ahol a terméket vásárolta.Nederlands (Dutch) - Milieu-informatie voor klantenin de Europese UnieDe Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur dieis voorzien van dit symbool op het product of de verpakking,niet mag worden ingezameld met niet-gescheiden huishoudelijk afval. Dit symbool geeft aan dat het product apart moet worden ingezameld. U bent zelf verantwoordelijk voor de vernietigingvan deze en andere elektrische en elektronische apparatuur via de daarvoor door de landelijke of plaatselijke overheid aangewezen inzamelingskanalen. De juiste vernietiging en recycling vandeze apparatuur voorkomt mogelijke negatieve gevolgen voorhet milieu en de gezondheid. Voor meer informatie over hetvernietigen van uw oude apparatuur neemt u contact op metde plaatselijke autoriteiten of afvalverwerkingsdienst, of met dewinkel waar u het product hebt aangeschaft.Norsk (Norwegian) - Miljøinformasjon for kunder i EUEU-direktiv 2002/96/EF krever at utstyr med følgende symbol avbildet på produktet og/eller pakningen, ikke må kastessammen med usortert avfall. Symbolet indikerer at detteproduktet skal håndteres atskilt fra ordinær avfallsinnsamlingfor husholdningsavfall. Det er ditt ansvar å kvitte deg meddette produktet og annet elektrisk og elektronisk avfall via egne innsamlingsordninger slik myndighetene eller kommunenebestemmer. Korrekt avfallshåndtering og gjenvinning vilvære med på å forhindre mulige negative konsekvenser formiljø og helse. For nærmere informasjon om håndtering avdet kasserte utstyret ditt, kan du ta kontakt med kommunen,en innsamlingsstasjon for avfall eller butikken der du kjøpteproduktet.Polski (Polish) - Informacja dla klientów w UniiEuropejskiej o przepisach dotyczących ochronyśrodowiskaDyrektywa Europejska 2002/96/EC wymaga, aby sprzętoznaczony symbolem znajdującym się na produkcie i/lub jego opakowaniu nie był wyrzucany razem z innymi niesortowanymiodpadami komunalnymi. Symbol ten wskazuje, że produktnie powinien być usuwany razem ze zwykłymi odpadami zgospodarstw domowych. Na Państwu spoczywa obowiązek wyrzucania tego i innych urządzeń elektrycznych orazelektronicznych w punktach odbioru wyznaczonych przez władzekrajowe lub lokalne. Pozbywanie się sprzętu we właściwy sposóbi jego recykling pomogą zapobiec potencjalnie negatywnymkonsekwencjom dla środowiska i zdrowia ludzkiego. W celuuzyskania szczegółowych informacji o usuwaniu starego sprzętu,prosimy zwrócić się do lokalnych władz, służb oczyszczaniamiasta lub sklepu, w którym produkt został nabyty.
Appendix E Regulatory Information40Wireless-G Internet Home Monitoring CameraPortuguês (Portuguese) - Informação ambiental paraclientes da União EuropeiaA Directiva Europeia 2002/96/CE exige que o equipamentoque exibe este símbolo no produto e/ou na sua embalagem não seja eliminado junto com os resíduos municipais nãoseparados. O símbolo indica que este produto deve sereliminado separadamente dos resíduos domésticos regulares.É da sua responsabilidade eliminar este e qualquer outroequipamento eléctrico e electrónico através das instalaçõesde recolha designadas pelas autoridades governamentais oulocais. A eliminação e reciclagem correctas ajudarão a preveniras consequências negativas para o ambiente e para a saúdehumana. Para obter informações mais detalhadas sobre aforma de eliminar o seu equipamento antigo, contacte asautoridades locais, os serviços de eliminação de resíduos ou o estabelecimento comercial onde adquiriu o produto.Română (Romanian) - Informaţii de mediu pentruclienţii din Uniunea EuropeanăDirectiva europeană 2002/96/CE impune ca echipamentele care prezintă acest simbol pe produs şi/sau pe ambalajul acestuia sănu fie casate împreună cu gunoiul menajer municipal. Simbolul indică faptul că acest produs trebuie să fie casat separat degunoiul menajer obişnuit. Este responsabilitatea dvs. să casaţiacest produs şi alte echipamente electrice şi electronice prinintermediul unităţilor de colectare special desemnate de guvernsau de autorităţile locale. Casarea şi reciclarea corecte vor ajutala prevenirea potenţialelor consecinţe negative asupra sănătăţiimediului şi a oamenilor. Pentru mai multe informaţii detaliatecu privire la casarea acestui echipament vechi, contactaţiautorităţile locale, serviciul de salubrizare sau magazinul de lacare aţi achiziţionat produsul.Slovenčina (Slovak) - Informácie o ochrane životnéhoprostredia pre zákazníkov v Európskej úniiPodľa európskej smernice 2002/96/ES zariadenie s týmtosymbolom na produkte a/alebo jeho balení nesmie byť likvidované spolu s netriedeným komunálnym odpadom.Symbol znamená, že produkt by sa mal likvidovať oddeleneod bežného odpadu z domácností. Je vašou povinnosťoulikvidovať toto i ostatné elektrické a elektronické zariadeniaprostredníctvom špecializovaných zberných zariadení určenýchvládou alebo miestnymi orgánmi. Správna likvidácia a recykláciapomôže zabrániť prípadným negatívnym dopadom na životnéprostredie a zdravie ľudí. Ak máte záujem o podrobnejšieinformácie o likvidácii starého zariadenia, obráťte sa, prosím, namiestne orgány, organizácie zaoberajúce sa likvidáciou odpadovalebo obchod, v ktorom ste si produkt zakúpili.Slovenčina (Slovene) - Okoljskeinformacije za strankev Evropski unijiEvropska direktiva 2002/96/EC prepoveduje odlaganje opreme,označene s tem simbolom – na izdelku in/ali na embalaži – med običajne, nerazvrščene odpadke. Ta simbol opozarja, da je trebaizdelek odvreči ločeno od preostalih gospodinjskih odpadkov.Vaša odgovornost je, da to in preostalo električno in elektronsko opremo odnesete na posebna zbirališča, ki jih določijodržavne ustanove ali lokalna uprava. S pravilnim odlaganjemin recikliranjem boste preprečili morebitne škodljive vplive naokolje in zdravje ljudi. Če želite izvedeti več o odlaganju stareopreme, se obrnite na lokalno upravo, odpad ali trgovino, kjerste izdelek kupili.Suomi (Finnish) - Ympäristöä koskevia tietoja EU-alueen asiakkailleEU-direktiivi 2002/96/EY edellyttää, että jos laitteistossa on tämä symboli itse tuotteessa ja/tai sen pakkauksessa, laitteistoaei saa hävittää lajittelemattoman yhdyskuntajätteen mukana.Symboli merkitsee sitä, että tämä tuote on hävitettävä erillääntavallisesta kotitalousjätteestä. Sinun vastuullasi on hävittäätämä elektroniikkatuote ja muut vastaavat elektroniikkatuotteetviemällä tuote tai tuotteet viranomaisten määräämäänkeräyspisteeseen. Laitteiston oikea hävittäminen estäämahdolliset kielteiset vaikutukset ympäristöön ja ihmistenterveyteen. Lisätietoja vanhan laitteiston oikeasta hävitystavastasaa paikallisilta viranomaisilta, jätteenhävityspalvelusta tai siitämyymälästä, josta ostit tuotteen.Svenska (Swedish) - Miljöinformation för kunderiEuropeiska unionenDet europeiska direktivet 2002/96/EC kräver att utrustning meddenna symbol på produkten och/eller förpackningen inte får kastas med osorterat kommunalt avfall. Symbolen visar att denna produkt bör kastas efter att den avskiljts från vanligt hushållsavfall. Det faller på ditt ansvar att kasta denna och annan elektrisk och elektronisk utrustning på fastställda insamlingsplatser utsedda av regeringen eller lokala myndigheter. Korrekt kassering ochåtervinning skyddar mot eventuella negativa konsekvenserför miljön och personhälsa. För mer detaljerad information om kassering av din gamla utrustning kontaktar du dina lokalamyndigheter, avfallshanteringen eller butiken där du köpteprodukten.WEB: For additional information, please visitwww.linksys.com7092010NC-AI

Navigation menu