LINKSYS WML11B Wireless-B Media Link for Music User Manual Book

LINKSYS LLC Wireless-B Media Link for Music Book

user manual part 5

24Chapter 5: Connecting the Wireless-B Media Link for Music to Your Audio SystemUsing the LCD Menus to Set up the Media LinkWireless-B Media Link for MusicEncryptionIf you want to change the Media Link’s encryption settings, select Encryption. You will see four choices: WEP (Wired Equivalent Privacy), Key Entry Method, Key Size, and Key.WEP - To enable or disable WEP encryption, select WEP. To enable WEP encryption, select Enable. To disable WEP encryption, select Disable. Your selection will be denoted by a bracketed asterisk, [*]. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.Key Entry Method - To change how you want to enter the WEP key, select Key Entry Method. If you want to enter a passphrase to generate a WEP key, select ASCII. If you want to enter the WEP key using hexadecimal characters, select HEX. Your selection will be denoted by a bracketed asterisk, [*]. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.Key Size - To change the size of the WEP key, select Key Size. If you want to use a 64-bit key, select 64. If you want to use a 128-bit key, select 128. Your selection will be denoted by a bracketed asterisk, [*]. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.Key - To change the passphrase or WEP key, select Key. Enter the passphrase (ASCII characters) or WEP key (hexadecimal characters) in this field. Use the arrow keys to scroll through the available ASCII or hexadecimal characters. To make a selection, press the Select button. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change. If you are entering hexadecimal characters, make sure you enter the exact number of hexadecimal characters requested on the Key screen.Site SurveyIf you want to search for all available wireless networks, select Site Survey. A list of wireless networks will appear. To connect to a specific network, select it, and press the right arrow button. If the network uses WEP encryption, a new screen will appear and ask you to enter the WEP key.TCP/IPTo change the Media Link’s TCP/IP settings, select TCP/IP. You will see up to six choices: DHCP, IP Address, Subnet Mask, Gateway, DNS Server 1, and DNS Server 2.Figure 5-17: Encryption ScreenWEP (Wired Equivalent Privacy): a method of encrypting data transmitted on a wireless network for greater security.Passphrase: used much like a password, a passphrase simplifies the WEP encryption process by automatically generating the WEP encryption for Linksys products.Figure 5-18: Site Survey Screen
25Chapter 5: Connecting the Wireless-B Media Link for Music to Your Audio SystemUsing the LCD Menus to Set up the Media LinkWireless-B Media Link for MusicDHCPTo change the Media Link’s DHCP setting, select DHCP. If the Media Link will be assigned an IP address automatically by a router or other DHCP server, then select Enable. You will not see the IP Address, Subnet Mask, Gateway, and DNS Server menus because these settings will be set automatically. If the Media Link needs a static IP address, then select Disable. You will need to configure the IP Address, Subnet Mask, Gateway, and at least one of the DNS Server settings.Your selection will be denoted by a bracketed asterisk, [*]. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.IP AddressTo change the Media Link’s static IP address, select IP Address. Use the arrow keys to scroll through the numbers 0-9 and punctuation (a period). To make a selection, press the Select button. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.Subnet MaskTo change the Media Link’s subnet mask, select Subnet Mask. Use the arrow keys to scroll through the numbers 0-9 and punctuation (a period). To make a selection, press the Select button. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.GatewayTo change the Media Link’s gateway, select Gateway. Use the arrow keys to scroll through the numbers 0-9 and punctuation (a period). To make a selection, press the Select button. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.DNS Server 1 and DNS Server 2To change the Media Link’s DNS server address, select DNS Server 1 and/or DNS Server 2. (You must enter at least one DNS server address.) Use the arrow keys to scroll through the numbers 0-9 and punctuation (a period). To make a selection, press the Select button. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.For information about the other LCD menus, refer to “Chapter 6: Using the LCD Menus of the Wireless-B Media LInk for Music.”After you have finished configuring the Media Link’s network settings, proceed to the next section, “Installing the Media Server Software.”Figure 5-19: TCP/IP ScreenFigure 5-20: IP Address ScreenStatic IP address: a fixed address assigned to a computer or device connected to a network.
26Chapter 5: Connecting the Wireless-B Media Link for Music to Your Audio SystemInstalling the Media Server SoftwareWireless-B Media Link for MusicInstalling the Media Server SoftwareFor the Media LInk to work properly, you must install the Media Server software on at least one PC in your network. This software, which is called Musicmatch Jukebox, allows your computer to communicate with the Media Link, so music tracks can be sent to the stereo and/or Media Link speakers (WMLS11B only). Musicmatch Jukebox also organizes the music tracks and creates playlists, so you can easily find the songs you want to play. To install the software, follow these instructions:1. Insert the Setup CD-ROM into your PC’s CD-ROM drive. The Setup Wizard should run automatically, and the Welcome screen should appear. If it does not, click the Start button and choose Run. In the field that appears, enter D:\setup.exe (where “D” is the letter of your CD-ROM drive).2. Click Install Media Server, and follow the on-screen instructions.Proceed to the “Setting up Musicmatch Jukebox” section.Setting up Musicmatch JukeboxAfter you have installed Musicmatch Jukebox, you will see its icon in the system tray of your taskbar, as well as on your desktop. Double-click either icon to start the software.To enable communication between Musicmatch Jukebox and the Media Link, follow these instructions:1. Click the Options menu.2. Click Settings.Figure 5-21: Welcome ScreenNOTE: If the computer running Musicmatch Jukebox goes into Sleep mode, then you will not be able to use the Media Link. To prevent Sleep mode:1. Click the Start button and Control Panel.2. Depending on the type of Windows operating system you are using, click Control Panel or click Settings and then Control Panel.3. Depending on the type of Windows operating system, either double-click Power Options, or click Performance and Maintenance and then Power Options.4. On the Power Schemes screen, select Never for the System standby and System hibernate settings.5. Click the OK button.Figure 5-22: Musicmatch Jukebox Icons
27Chapter 5: Connecting the Wireless-B Media Link for Music to Your Audio SystemSetting up Musicmatch JukeboxWireless-B Media Link for Music3. Click the CD Lookup/Connectivity tab.4. In the Services section, click the checkbox next to Enable Music Server.5. Then click the checkbox next to Universal Plug and Play.6. Click the OK button.For information on how to use Musicmatch Jukebox, visit www.musicmatch.com, or click the Help menu of the software program.Proceed to “Chapter 6: Using the LCD Menus of the Wireless-B Media Link for Music.”NOTE: If you want to send music to the Media Link from multiple computers, you have two options:You can install Musicmatch Jukebox on multiple computers, so you can switch between Media Servers when you want to send music to the Media Link from a different computer; orYou can install Musicmatch Jukebox on one computer and use shared drives on the network, so the music files can be accessed through the one computer.Figure 5-23: CD Lookup/Connectivity Tab
28Chapter 6: Using the LCD Menus of the Wireless-B Media Link for MusicOverviewWireless-B Media Link for MusicChapter 6: Using the LCD Menus of the Wireless-B Media Link for MusicOverviewThis chapter explains how to use the Media Link via the LCD menus on its front panel. For example, you can choose a playlist, browse for an album, or choose an Internet radio station.After you have set up the Media Link and connected it to your stereo, the main menu will appear (see Figure 6-1). It has nine choices:• Playlists• Favorites• Browse• Internet Radio• Media Servers•Network Setup• Network Status• Update Radio List•EQIf you haven’t already done so, insert the included AAA batteries into the Remote Controller.To navigate the menus of the LCD screen, use the directional arrows on the remote or the Media Link’s front panel. Press the Select or right arrow button to make a selection. Press the right arrow button to save any changes. Press the left arrow button to cancel any selection or changes. Press the Menu button to access the main menu at any time.As a music track plays, the screen shown in Figure 6-2 will be displayed on the LCD screen. It shows information about the music track, such as playlist title, song title, artist, and/or album title. At the bottom of the screen, it also shows how much of the song has been played and how long the song is.Use the Play/Pause and Stop buttons on the remote to control music playback. Use the Forward and Backward buttons to move forward or go backward within a music track. Use the Previous and Next buttons to move between music tracks.Figure 6-1: Main Menu ScreenFigure 6-2: Song Playing Screen
29Chapter 6: Using the LCD Menus of the Wireless-B Media Link for MusicLCD Menu IconsWireless-B Media Link for MusicLCD Menu IconsAt the top of the LCD screen, you will see one or more icons indicating the Media Link’s network type, the status of the music track, and which options you have selected. Here are descriptions of the nine icons:• Wired Network - The Media Link is functioning as part of your wired network.• Wireless Network - The Media Link is functioning as part of your wireless network.• No Network Signal - The Media Link is not receiving a signal from any network.• Music Track Playing - The Media Link is playing the selected music track.• Music Track Paused - You have paused the selected music track.• Mute Music Track - You have silenced the music track that is currently playing.• Shuffle Music Tracks - The selected music tracks are playing in a random sequence.• Repeat Music Track - You are re-playing the selected music track.• Repeat All Music Tracks - You are re-playing all of the selected music tracks.Figure 6-5: No Network SignalFigure 6-4: Wireless NetworkFigure 6-3: Wired NetworkFigure 6-6: Music Track PlayingFigure 6-7: Music Track PausedFigure 6-8: Mute Music TrackFigure 6-9: Shuffle Music TracksFigure 6-10: Repeat Music TrackFigure 6-11: Repeat All Music Tracks
30Chapter 6: Using the LCD Menus of the Wireless-B Media Link for MusicPlaylist MenuWireless-B Media Link for MusicPlaylist MenuAt any time, you can use the Music button on the remote to access the Music menu. To play certain songs in a specific sequence, select the Playlist menu, which will list the playlists that you have created using Musicmatch. Select the playlist you want, and press the right arrow button.Favorites MenuThe Favorites menu will list your favorites. Select the radio station you want, and press the right arrow button.To designate your favorite radio station, scroll to Internet Radio, and select the radio station you want. Press the Select button, and select Add to Favorites. Then press the Select button again. If you already know the URL for your favorite radio station, use the Media Link’s Web-based Utility to add up to 20 favorites. Refer to “Chapter 7: Using the Web-based Utility of the Wireless-B Media Link for Music.”Browse MenuThe Browse menu offers seven choices: Albums, All Tracks, Artists, Artists/Albums, Genres, Genres/Artists, and Playlists. Press the right arrow button to make a selection. As you browse, you will see additional screens with more choices. Select the song you want, and press the right arrow button.AlbumsThe Albums screen lets you select the music you want to play according to album.All TracksSelect All Tracks to play every track in your digital music library.Artists, Artists/Albums, Genres, Genres/ArtistsIf you want to play all the songs by a certain artist, select Artists. To browse by Artist and Album title, select Artists/Albums. To play all the songs of a certain genre, such as jazz or classical, select Genres. To browse by Genre and Artist, select Genres/Artists.PlaylistsTo play certain songs in a specific sequence, select the Playlist menu, which will list the playlists that you have created using Musicmatch. Select the playlist you want, and press the right arrow button.Figure 6-13: Favorites ScreenFigure 6-14: Browse ScreenFigure 6-12: Playlist Screen
31Chapter 6: Using the LCD Menus of the Wireless-B Media Link for MusicInternet Radio MenuWireless-B Media Link for MusicInternet Radio MenuThe Media Link uses vTuner to find radio and TV broadcasts over the Internet. When you select the Internet Radio menu, you have three choices: Genres, Countries, and All Stations. At any time, you can use the iRadio button on the remote to access the Internet Radio menu. GenresYou have an extensive list of genres available, from the Blues to News Talk to World Tropical. Press the right arrow button to make a selection. As you proceed with your browsing, you will see additional screens offering the available choices. When you have selected the Internet radio station you want, then press the right arrow button.CountriesYou can select from an extensive list of countries, from Antigua to Italy to Thailand. Press the right arrow button to make a selection. As you proceed with your browsing, you will see additional screens offering the available choices. When you have selected the Internet radio station you want, then press the right arrow button.All StationsScroll through the list of all Internet radio stations. When you have selected the Internet radio station you want, press the right arrow button.Media Server MenuYou can play music from any computer that has the Media Server installed (refer to “Chapter 4: Setting up the Wireless-B Media Link for Music”). To play music located on a different computer, use the Media Server menu to switch between computers.When you select the Media Server menu, you will see a list of servers available on your network. “MM” denotes a Musicmatch server, while “RM” denotes a Rhapsody music server. Press the right arrow button to make a selection.Network Setup MenuIf you want to set up the Media Link without using a computer, then use the Network Setup menu.After you have selected the Network Setup menu, you will see these choices: Change to wired (network), Device Name, Wireless (settings), TCP/IP (settings), and Proxy (settings).Figure 6-15: Internet Radio ScreenFigure 6-16: Media Server ScreenFigure 6-17: Network Setup Screen
32Chapter 6: Using the LCD Menus of the Wireless-B Media Link for MusicNetwork Setup MenuWireless-B Media Link for MusicChange to wiredIf you want to use the Media Link as part of your wired network, select Change to wired. When asked if you are sure, select Yes to continue, or select No to cancel the setup. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.Device NameIf you want to change the Media Link’s Device Name, select Device Name. Use the arrow keys to scroll through the uppercase alphabet, lowercase alphabet, numbers, and punctuation. To make a selection, press the Select button. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.WirelessTo change the Media Link’s wireless settings, select Wireless. You have four choices: SSID, Network Type, Encryption, and Site Survey.SSIDThe Media Link’s default SSID is any. If you want to change its default SSID, select SSID. Use the arrow keys to scroll through the uppercase alphabet, lowercase alphabet, numbers, and punctuation. To make a selection, press the Select button. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.Figure 6-18: Device Name ScreenFigure 6-19: Wireless ScreenFigure 6-20: SSID ScreenNOTE: Every time you want to save a new setting, you must press the right arrow button on the remote or front panel. Then the Media Link will save the setting and restart itself.
33Chapter 6: Using the LCD Menus of the Wireless-B Media Link for MusicNetwork Setup MenuWireless-B Media Link for MusicNetwork TypeIf you want to change the wireless network type, select Network Type. If your network uses infrastructure mode, then select Infrastructure. If your network uses ad-hoc mode, then select Ad-Hoc. Your selection will be denoted by a bracketed asterisk, [*]. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.EncryptionIf you want to change the Media Link’s encryption settings, select Encryption. You will see four choices: WEP (Wired Equivalent Privacy), Key Entry Method, Key Size, and Key.WEP - To enable or disable WEP encryption, select WEP. To enable WEP encryption, select Enable. To disable WEP encryption, select Disable. Your selection will be denoted by a bracketed asterisk, [*]. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.Key Entry Method - To change how you want to enter the WEP key, select Key Entry Method. If you want to enter a passphrase to generate a WEP key, select ASCII. If you want to enter the WEP key using hexadecimal characters, select HEX. Your selection will be denoted by a bracketed asterisk, [*]. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.Key Size - To change the size of the WEP key, select Key Size. If you want to use a 64-bit key, select 64. If you want to use a 128-bit key, select 128. Your selection will be denoted by a bracketed asterisk, [*]. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change.Key - To change the passphrase or WEP key, select Key. Enter the passphrase (ASCII characters) or WEP key (hexadecimal characters) in this field. Use the arrow keys to scroll through the available ASCII or hexadecimal characters. To make a selection, press the Select button. Press the right arrow button to save your new setting. Press the left arrow button to cancel your change. If you are entering hexadecimal characters, make sure you enter the exact number of hexadecimal characters requested on the Key screen.Figure 6-21: Network Type ScreenFigure 6-22: Encryption ScreenFigure 6-23: Key ScreenNOTE: Every time you want to save a new setting, you must press the right arrow button on the remote or front panel. Then the Media Link will save the setting and restart itself.

Navigation menu