LINKSYS M3260 Digital Video Recorder User Manual User Guide MINOHD WiFi Source Text 10 25 10

LINKSYS LLC Digital Video Recorder User Guide MINOHD WiFi Source Text 10 25 10

User Manual

Draft: 10/25/2010  1  MINOHD WiFi (Jenner) USER GUIDE – ENGLISH SOURCE TEXT FOR USA  PANEL 1 MINOHD WIRELESS QUICK START GUIDE  VISUALS  Set Up Wireless 1.  Plug your video camera into your computer to install FlipShare software and setup wireless sharing features. (For instructions on installing FlipShare, see User Guide.)  2.  Follow prompts in the FlipShare installation to: a.  Add your email and phone contacts b.  Link to your social networking accounts (e.g. Facebook) c.  Authenticate your Flipshare.com sharing account d.  Setup your wireless network(s)  PANEL 2 LIVE STREAMING (Note: if you have not yet setup your wireless network in FlipShare, please do so before attempting Live Streaming.)  Connect •  Press  (sharing button image) to enable wireless sharing •  Press  + and – to choose a wireless network, if one is not automatically selected follow steps from “Network Setup” Select •  Press  < and > to select Live Streaming •  Press  + and – to select a sharing recipient such as email address, social  media site, or FlipShare.com Share •  Press (red record button) to begin recording video and streaming live to your video recipient •  Press (red record button) to stop recording and end live streaming session           PANEL 3 INSTANT SHARE (Note: if you have not yet setup your wireless network in FlipShare, please do so before attempting Instant Share.)  Connect •  Press  (sharing button image) to enable wireless instant share •  Press + and – to choose a wireless network, if one is not automatically selected follow steps from “Network Setup” Select •  Press < and > to select Instant Share •  Press < and > to view previous/next video to select which video you would like to share • Press + and – to select a sharing recipient such as an email address,
Draft: 10/25/2010  2  social media site or Flipshare.com Share •  Press (play button) to begin the Instant Share upload PANEL 4 NETWORK SETUP Press and hold the (share button) and (red record button) at the same time to enter network setup.  To add a new network (network name is visible): Press + or – to select the network name from the list •  Press the <, >, +, - to select letters from the onscreen keyboard, if a network password is required •  Press (play button) to log onto the network  To add a new network (network name does not appear):    •  Press the (share button) to enter the network name •  Press the <, >, +, - to select letters from the onscreen keyboard to enter the network name •  Press + or – to select the type of network password required •  Press the <, >, +, - to select letters from the onscreen keyboard, if a network password is required •  Press (play button) to log onto the network      PANEL 1 MINOHD  USER GUIDE  PANEL 2 Get Started   Welcome to Flip MinoHD™ 1 Press power button to turn on. Video camera settings appear automatically when you first power on. Note: Video camera is shipped with a partially charged battery. If battery is not charged, simply follow the steps in the Recharge Battery section.  Set Language • Use + - to select your language. Set Date • Use + - to adjust the current setting. • Use < > to select month/day/year. Set Time • Use + - to adjust the current setting. • Use < > to select hour/minute/am/pm. Tones • Use < > to turn the tones on and off.
Draft: 10/25/2010  3  Recording Light • Use < > to turn the recording light on and off. To Return to Video Camera Setup Later Starting with the video camera OFF: 1 Press power button to turn on. 2 When Flip Video logo appears, press and hold record button until Select a Language appears.  PANEL 3 Record and Play  Touch-Sensitive Buttons Gently touch lighted icons with your finger to activate the controls on the back panel.  Record Videos 1 Press   to start/stop recording. 2 Press and hold + - to zoom in/out during recording. Play Videos 1 Press  to play/pause.  Press and hold to play all videos. 2 Press and hold + - to increase/decrease volume. 3 Press < > to view previous/next video. Note: Press and hold  < > during playback to rewind/fast-forward. Deleting Videos 1 Press  button. Select YES to confirm. Note: Delete button is locked when you first power on. To unlock, press and hold delete button.   PANEL 4 Connect to Computer  1 Slide USB latch down. USB arm flips up automatically. 2 Connect USB arm to computer’s USB port. 3 The battery pack will begin recharging and you can install FlipShare™ software on your computer.  Recharge Battery  1 Slide USB latch down. USB arm flips up automatically. 2 Connect USB arm to computer’s USB port. 3 Recording light turns on to indicate charging. When charged, the recording light turns off. • The video camera uses a sealed, rechargeable battery.  • Fully recharging the battery takes about three hours.  • The video camera may remain connected to your computer after it is fully
Draft: 10/25/2010  4  charged, but disconnecting it will help preserve the battery pack’s lifespan and performance. • The optional Flip Video Power Adapter can charge the battery in about two hours.  Note: Your computer must be powered on for your video camera to charge. PANEL 5 Organize, Create and Share   FLIPSHARE logo Pre-loaded FlipShare software makes editing and sharing your videos easy. Just plug in your video camera, open FLIPVIDEO and launch Setup FlipShare (PC) or Start FlipShare (Mac).  FlipShare Features • Save videos to your computer. • Organize your videos. • Create custom movies • Capture snapshots • Share your videos via email or Flip Channels, or upload directly to:  Facebook™ (logo) MySpace™ (logo) Twitter™ (logo)  YouTube™ (logo)  Visit the FlipShare software HELP section for detailed instructions on all features.  PANEL 6 View On HD Television   1 Power off video camera and television. 2 Connect video camera to television with optional HDMI™ Cable from Flip Video (available at www.theflip.com/accessories). 3 Power on video camera and television. • Video camera screen turns off when connected to television. 4 Switch your television to the appropriate VIDEO input. • See television manual for instructions. 5 Touch play button to start/pause playback.  HDMI Cable Note: You can use any brand of HDMI Cable that has an HDMI Connector (for the TV) on one end and an HDMI Mini Connector (for the video camera) on the other end.  PANEL 7,8 Video Camera Features   1 Power Button 2 Wrist Strap Hook 3 Tripod Mount 4 Recording Light 5 USB Latch 6 USB Arm 7 HDMI Mini Port   1 Press to turn on/off. 2 Attach wrist strap (included in box). 3 Attach a tripod or a Flip Video Tripod accessory.   4 Red light turns on during recording or charging. Built-in wide-range microphone is also located here. 5 Slide down to release USB arm. 6 Connect to a PC or Mac USB port.  7 Connect HDMI cable accessory to your HDTV.
Draft: 10/25/2010  5  8 Screen 9 Recording Controls  Record Button  Play Button  Delete Button + - Up/Down Buttons < > Left/Right Buttons   8 Recording viewfinder/playback screen. 9 Touch buttons to record and preview videos. Press and release to start/stop recording. During Power On: Hold to return to video camera setup. Touch to play/pause recording. Touch and hold to play all videos. Touch to delete. Touch and hold to lock/unlock the delete button. While Recording: Press and hold to zoom in/out. During Playback: Press and hold to increase/decrease volume. While Paused: Press to skip to previous/next video. During Playback: Press and hold to rewind/fast-forward.   Flip Video offers a variety of accessories for your video camera. Learn more at www.theflip.com/accessories.  PANEL 9 top bubble Included In This Box  • Flip MinoHD Video Camera • Wrist Strap • Soft Case • User Guide • Safety Instructions • Warranty Information   PANEL 9 middle bubble Flip Video Support : Go to www.theflip.com/support   Panel 9 Declaration of conformity Declaration of Conformity: Responsible Party: Cisco Consumer Products LLC, 185 Berry Street, Suite 6500, San Francisco, CA 94107 USA  FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following  two  conditions:  (1)  This  device  may  not  cause  harmful  interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radio and TV Interference This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. These specifications are designed to provide reasonable protection against  harmful  interference  in  a  residential  installation.  This  equipment generates, uses, and can radiate radio frequency energy and, if not installed and used  in  accordance  with  the  manufacturer’s  instructions,  may  cause  harmful interference  to  radio  communications.    However,  there  is  no  guarantee  that interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does cause  harmful  interference  to  radio  or  television  reception,  which  can  be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.
     Draft:10/25/2010  •Increasetheseparationbetweentheequipmentandthereceiver.•Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.•Consultthedealeroranexperiencedradio/televisiontechnicianforhelp.CAUTION:ChangesormodificationstothisdevicenotauthorizedbyCiscoConsumerProductsLLCmayvoidtheuser’sauthoritytooperatethisdevice.Foroperationwithin5.15~5.25GHzfrequencyrange,itisrestrictedtoindoorenvironment.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.IMPORTANTNOTE:RadiationExposureStatement:TheproductcomplywiththeUS/CanadaportableRFexposurelimitsetforthforanuncontrolledenvironmentandaresafeforintendedoperationasdescribedinthismanual.ThefurtherRFexposurereductioncanbeachievediftheproductcanbekeptasfaraspossiblefromtheuserbodyorsetthedevicetoloweroutputpowerifsuchfunctionisavailable.Thistransmittermustnotbeco‐locatedoroperatinginconjunctionwithanyotherantennaortransmitter.CANADIANICES‐003STATEMENT:ThisClassBdigitalapparatuscomplieswithCanadianICES‐003.‘ICStatementThisdevicecomplieswithRSS‐210oftheIndustryCanadaRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.IMPORTANTNOTE:RadiationExposureStatement:TheproductcomplywiththeUS/CanadaportableRFexposurelimitsetforthforanuncontrolledenvironmentandaresafeforintendedoperationasdescribedinthismanual.ThefurtherRFexposurereductioncanbeachievediftheproductcanbekeptasfaraspossiblefromtheuserbodyorsetthedevicetoloweroutputpowerifsuchfunctionisavailable.Intheeventthattheseconditionscannotbemet(forexamplecertainlaptopconfigurationsorco‐locationwithanothertransmitter),thentheCanadaauthorizationisnolongerconsideredvalidandtheICIDcannotbeusedonthefinalproduct.Inthesecircumstances,theOEMintegratorwillberesponsibleforre‐evaluatingtheendproduct(includingthetransmitter)andobtainingaseparateCanadaauthorization.CedispositifestconformeàlanormeCNR‐210d'IndustrieCanadaapplicableaux
appareilsradioexemptsdelicence.Sonfonctionnementestsujetauxdeuxconditionssuivantes:(1)ledispositifnedoitpasproduiredebrouillagepréjudiciable,et(2)cedispositifdoitacceptertoutbrouillagereçu,ycomprisunbrouillagesusceptibledeprovoquerunfonctionnementindésirable.NOTEIMPORTANTE:(Pourl'utilisationdesappareilsportables)Déclarationd'expositionauxradiations:Leproduitestconformeauxlimitesd'expositionpourlesappareilsportablesRFpourlesEtats‐UnisetleCanadaétabliespourunenvironnementnoncontrôlé.Leproduitestsûrpourunfonctionnementtelquedécritdanscemanuel.LaréductionauxexpositionsRFpeutêtreaugmentéesil'appareilpeutêtreconservéaussiloinquepossibleducorpsdel'utilisateurouqueledispositifestréglésurlapuissancedesortielaplusfaiblesiunetellefonctionestdisponible.Danslecasoùcesconditionsnepeuventêtresatisfaites(parexemplepourcertainesconfigurationsd'ordinateurportableoudecertainesco‐localisationavecunautreémetteur),l'autorisationduCanadan'estplusconsidérécommevalideetl'IDICnepeutpasêtreutilisésurleproduitfinal.Danscescirconstances,l'intégrateurOEMserachargéderéévaluerleproduitfinal(ycomprisl'émetteur)etl'obtentiond'uneautorisationdistincteauCanada.PANEL9TrademarkCisco,theCiscologo,FlipMinoHD,FlipShare,FlipVideo,andtheFlipVideologoaretrademarksorregisteredtrademarksofCiscoand/oritsaffiliatesintheUnitedStatesandcertainothercountries.Allothertrademarksmentionedinthisdocumentorwebsitearethepropertyoftheirrespectiveowners.Formoreinformation,pleasevisitwww.theflip.com. FacebookTM,MySpaceTM, TwitterTM,andYouTubeTMaretrademarksoftheirrespectiveowners.HDMI,theHDMILogoandHigh‐DefinitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMILicensingLLC.MacisaregisteredtrademarkofAppleInc.©2010Ciscoand/oritsaffiliates.Allrightsreserved.

Navigation menu