LANKE XUNTONG TECHNOLOGY PTR5518IPX Bluetooth 4.0 module User Manual

LANKE XUNTONG TECHNOLOGY CO.,LTD Bluetooth 4.0 module Users Manual

Contents

User Manual 1

Coin-size Ultra Low Power Bluetooth 4.0 Low Energy RF Module Features Complete Bluetooth 4.0，single mode compliant，Integrated Bluetooth low energy stack/profiles.2.4 GHz transceiver•-93 dBm sensitivity in Bluetooth® low energy mode, -96 dBm sensitivity@250kbps,•13 mA peak RX, 10.5 mA peak TX (0 dBm)•RSSI (1 dB resolution)ARM® Cortex™-M0 32 bit processor, 256 kB flash memory, 16 kB RAM.•275 μA/MHz running from flash memory•150 μA/MHz running from RAM•Serial Wire Debug (SWD)Ultra low current consumption , Flexible Power Management•Supply voltage range 1.8 V to 3.6 V•2.5 μs wake-up using 16 MHz RCOSC•0.4 μA @ 3 V OFF mode•0.5 μA @ 3 V in OFF mode + 1 region RAM retention•2.3 μA @ 3 V ON mode, all blocks IDLEFlexible real-time counter and Two 16 bit and one 24 bit timers with counter modeAES Coprocessor, Random Number Generator ,Watchdog Timer ,Temperature sensorRich set of Peripheral: ADC, SPI, 2-wire , and UART. Programmable Peripheral Interconnect(PPI)Internal RC Oscillator 32.768 kHz(± 250 ppm).Configurable I/O mapping (I/O signals can use any pin, Simple layout of external application)Ultra small size(smaller than CR2032 coin battery), about 15mmx15mmx2.5mm.PTR5518-IPX COPYRIGHT ©2017 ALL RIGHTS RESERVED XunTong Technology E-mail: nrf@freqchina.com 1
Typical Applications:  - 2.4 GHz Bluetooth low energy systems  - Sports and leisure equipment  - Mobile phone accessories  - Health Care and Medical  - Consumer Electronics, Game pads  - Human Interface Devices, Remote control  - Building environment control / monitoring Pin Description of Module（Top View）: Pin No. Name Description Note 1 P0.08 I/O 2 P0.09 I/O 3 P0.12 I/O 4 SWDIO Debug and flash programming I/O 5 SWCLK Debug and flash programming I/O 6 P0.17 I/O 7 P0.18 I/O 8 P0.19 I/O 9 GND Power Ground 10 VDD Power Suply（1.9～3.6V） 11 P0.25 I/O 12 P0.26 I/O ADC IN 0 13 P0.27 I/O ADC IN 1 14 P0.28 I/O 15 P0.29 I/O COPYRIGHT ©2017 ALL RIGHTS RESERVED XunTong Technology E-mail: nrf@freqchina.com 2
Block diagram: HW debug and flash programming of Module : Pin Flash Program interface SWDIO Debug and flash programming I/O SWCLK Debug and flash programming I/O This is the hardware debug and flash programming of module, J-Link Lite support, pleas refer www.segger.com. COPYRIGHT ©2017 ALL RIGHTS RESERVED XunTong Technology E-mail: nrf@freqchina.com 3
Performance Data: Transmitter specification: Receiver specification: Radio current consumption: COPYRIGHT ©2017 ALL RIGHTS RESERVED XunTong Technology E-mail: nrf@freqchina.com 4
CPU current consumption: Power management: For more detail information, please refer nRF51822 datasheet. COPYRIGHT ©2017 ALL RIGHTS RESERVED XunTong Technology E-mail: nrf@freqchina.com 5
PCB Layout（TOP VIEW）: unit: mil Important Notice:  Reserves the right to make corrections, modifications, and/or improvements to the product and/or its specifications at any time without notice.  Assumes no liability for the user’s product and/or applications.  Products are not authorized for use in safety-critical applications, including but not limited to life-support applications. ATTENTION! Electrostatic Sensitive Device Observe Precaution for handling. COPYRIGHT ©2017 ALL RIGHTS RESERVED XunTong Technology E-mail: nrf@freqchina.com 6

Navigation menu