Kyocera S2151 Tri-Band CDMA Mobile Phone with Bluetooth User Manual

Kyocera Corporation Tri-Band CDMA Mobile Phone with Bluetooth

Contents

user manual

Safety & Warranty
Information
Safety
This phone guide contains important operational and safety information that
will help you safely use your phone. Failure to read and follow the information
provided in this phone guide may result in serious bodily injury, death, or
property damage.
General Precautions
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
+ To maximize performance, do not touch the portions of your phone where the
internal antennas are located while using the phone.
+ Speak directly into the mouthpiece.
+ Avoid exposing your phone and accessories to rain or liquid spills. If your
phone does get wet, immediately turn the power off and remove the battery.
+ Do not expose your phone to direct sunlight for extended periods of time
(such as on the dashboard of a car).
+ Although your phone is quite sturdy, it is a complex piece of equipment and
can be broken. Avoid dropping, hitting, bending, or sitting on it.
+ Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment and void your authority
to operate this equipment.
+ Authorized personnel should service your phone and accessories. Failure to
do so may be dangerous and void your warranty.
Maintaining Safe Use of and Access to Your Phone
Do Not Rely on Your Phone for Emergency Calls
Mobile phones operate using radio signals, which cannot guarantee
connection in all conditions. Therefore you should never rely solely upon
any mobile phone for essential communication (e.g., medical emergencies).
Emergency calls may not be possible on all cellular networks or when certain
network services or mobile phone features are in use. Check with your local
service provider for details.
Using Your Phone While Driving
Talking on your phone while driving (or operating the phone without a hands-
free device) is prohibited in some jurisdictions. Laws vary as to specific
restrictions. Remember to focus on driving first.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any special
regulations in a given area. Turn your phone off in areas where use is forbidden
or when it may cause interference or danger.
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, RF signals from wireless phones may affect inadequately
shielded electronic equipment. RF signals may affect improperly installed or
inadequately shielded electronic operating systems or entertainment systems
in motor vehicles. Check with the manufacturer or their representative to
determine if these systems are adequately shielded from external RF signals.
Also check with the manufacturer regarding any equipment that has been
added to your vehicle.
Personal Implantable Medical Devices
Consult the manufacturer of any personal medical devices, such as
pacemakers and hearing aids, to determine if they are adequately shielded
from external RF signals.
Note: Always request permission before using the phone in healthcare facilities
or near medical equipment.
Turning Off Your Phone Before Flying
To prevent possible interference with aircraft systems, the U.S. Federal Aviation
Administration (FAA) regulations require you to have permission from a crew
member to use your phone while the plane is on the ground. To help prevent
the risk of interference, regulations prohibit using your phone while the plane is
in the air.
Turning Off Your Phone in Dangerous Areas
To avoid interfering with blasting operations, turn your phone off when in a
blasting area or in other areas with signs indicating two-way radios should be
turned off. Construction crews often use remote-control RF devices to set off
explosives. Turn your phone off when you’re in any area that has a potentially
explosive atmosphere. Although it’s rare, your phone and accessories could
generate sparks. Sparks can cause an explosion or fire, resulting in bodily injury
or even death. These areas are often, but not always, clearly marked. They
include:
+ Fueling areas such as gas stations.
+ Below deck on ships and boats.
+ Fuel or chemical transfer or storage facilities.
+ Areas where the air contains chemicals or particles such as grain, dust, or
metal powders.
+ Any other area where you would normally be advised to turn off your vehicle’s
engine, for example.
Note: Never transport or store flammable gas, flammable liquids, or explosives
in the compartment of your vehicle that contains your phone or accessories.
Restricting Children’s Access to Your Phone
Your phone is not a toy. Do not allow children to play with it as they could hurt
themselves and others, damage the phone, make inadvertent emergency calls,
or make other calls that may impact your Boost account.
Using Your Phone With a Hearing Aid Device
A number of Boost phones have been tested for hearing aid device
compatibility. When some wireless phones are used with certain hearing
devices (including hearing aids and cochlear implants), users may detect a
noise which can interfere with the effectiveness of the hearing device. Some
hearing devices are more immune than others to this interference noise, and
phones also vary in the amount of interference noise they may generate. ANSI
standard C63.19 was developed to provide a standardized means of measuring
both wireless phone and hearing devices to determine usability rating
categories for both. Ratings have been developed for mobile phones to assist
hearing device users find phones that may be compatible with their hearing
device. Not all phones have been rated for compatibility with hearing devices.
Phones that have been rated have a label located on the box. Your Coast has
an M4 and a T4 rating.
These ratings are not guarantees. Results will vary depending on the user’s
hearing device and individual type and degree of hearing loss. If a hearing
device is particularly vulnerable to interference noise; even a phone with a
higher rating may still cause unacceptable noise levels in the hearing device.
Trying out the phone with your hearing device is the best way to evaluate it for
your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements for hearing aid
compatibility and are likely to generate less interference to hearing devices
than unrated phones. (M4 is the better/higher of the two ratings.)
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be
more usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”)
than unrated phones. (T4 is the better/higher of the two ratings. Note that not all
hearing devices have telecoils in them.)
Note: This phone has been tested and rated for use with hearing aids for some
of the wireless technologies that it uses. However, there may be newer wireless
technologies used in this phone that have not been tested yet for use with
hearing aids. It is important to try the different features of this phone thoroughly
and in different locations, using your hearing aid or cochlear implant, to
determine if you hear any interfering noise. Consult your service provider or the
manufacturer of this phone for information on hearing aid compatibility. If you
have questions about return or exchange policies, consult your service provider
or phone retailer.
Hearing aid devices may also be measured for immunity to interference noise
from wireless phones and should have ratings similar to phones. Ask your
hearing healthcare professional for the rating of your hearing aid. Add the rating
of your hearing aid and your phone to determine probable usability:
+ Any combined rating equal to or greater than six offers excellent use.
+ Any combined rating equal to five is considered normal use.
+ Any combined rating equal to four is considered usable.
Thus, if you pair an M3 hearing aid with an M3 phone, you will have a combined
rating of six for “excellent use.” This is synonymous for T ratings. Boost further
suggests you experiment with multiple phones (even those not labeled M3/T3
or M4/T4) while in the store to find the one that works best with your hearing
aid device. Should you experience interference or find the quality of service
unsatisfactory after purchasing your phone, promptly return it to the store. More
information about hearing aid compatibility may be found at: http://www.fcc.gov,
http://www.fda.gov, and http://www.accesswireless.org.
Getting the Best Hearing Device Experience With Your Phone
To further minimize interference, move the phone around to find the point with
least interference.
Caring for the Battery
Protecting Your Battery
The guidelines listed below help you get the most out of your battery’s
performance.
+ Recently there have been some public reports of wireless phone batteries
overheating, catching fire, or exploding. It appears that many, if not all, of
these reports involve counterfeit or inexpensive, aftermarket-brand batteries
with unknown or questionable manufacturing standards. Boost Mobile is not
aware of similar problems with Kyocera phones resulting from the proper
use of batteries and accessories approved by Boost phones resulting from
the proper use of batteries and accessories approved by the manufacturer
of your phone. Use only manufacturer-approved batteries and accessories
through your phone’s manufacturer. Buying the right batteries and
accessories is the best way to ensure they’re genuine and safe.
+ Do not disassemble or open, crush, bend or deform, puncture or shred the
battery.
+ Do not modify or remanufacture, attempt to insert foreign objects into the
battery, immerse or expose to water or other liquids, expose to fire, explosion,
or other hazard.
+ Avoid dropping the phone or battery. If the phone or battery is dropped,
especially on a hard surface, and the user suspects damage, take it to a
service center for inspection.
+ Improper battery use may result in a fire, explosion or other hazard.
+ Do not short-circuit a battery or allow metallic conductive objects to contact
battery terminals.
+ Keep the metal contacts on top of the battery clean.
+ Battery usage by children should be supervised.
+ In order to avoid damage, charge the battery only in temperatures that range
from 32° F to 113° F (0° C to 45° C).
+ Don’t use the battery charger in direct sunlight or in high humidity areas, such
as the bathroom.
+ The battery may need recharging if it has not been used for a long period of
time.
+ It’s best to replace the battery when it no longer provides acceptable
performance. It can be recharged hundreds of times before it needs
replacing.
Storing
+ Don’t store the battery in high temperature areas for long periods of time. It’s
best to follow these storage rules:
- Less than one month: -4° F to 140° F (-20° C to 60° C)
- More than one month: -4° F to 113° F (-20° C to 45° C)
Disposal of Lithium-Ion Polymer (Li-poly) Batteries
Promptly dispose of used batteries in accordance with local regulations. Never
dispose of the battery by incineration. Do not handle a damaged or leaking
Li-poly battery as you can be burned. For safe disposal options of your Li-Ion
batteries, contact your nearest Boost authorized service center.
Special Note: Be sure to dispose of your battery properly. In some areas, the
disposal of batteries in household or business trash may be prohibited.
Radio Frequency (RF) Energy
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it’s turned on, it
receive and transmits radio frequency (RF) signals. When you use your phone,
the system handling your call controls the power level. This power can range
from 0.006 watt to 0.2 watt in digital mode.
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP standards described
below. In 1991–92, the Institute of Electrical and Electronics Engineers (IEEE) and
the American National Standards Institute (ANSI) joined in updating ANSI’s 1982
standard for safety levels with respect to human exposure to RF signals. More
than 120 scientists, engineers and physicians from universities, government
health agencies and industries developed this updated standard after
reviewing the available body of research. In 1993, the Federal Communications
Commission (FCC) adopted this updated standard in a regulation. In August
1996, the FCC adopted hybrid standard consisting of the existing ANSI/IEEE
standard and the guidelines published by the National Council of Radiation
Protection and Measurements (NCRP).
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, if you wear a
handset on your body, use a Boost Mobile-supplied or Boost Mobile-approved
carrying case, holster or other body-worn accessory. If you do not use a body-
worn accessory, ensure the antennas are at least 0.591 inches (1.5 centimeters)
from your body when transmitting. Use of non-Boost Mobile-approved
accessories may violate FCC RF exposure guidelines. For more information
about RF exposure. Other accessories used with this phone for body-worn
operations must not contain any metallic components and must provide at
least 0.591 inches (1.5 centimeters) separation distance between the antennas
and the user’s body. For more information about RF exposure, visit the FCC
website at http://www.fcc.gov.
Specific Absorption Rates (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF energy
absorbed into the head of a user of a wireless handset. The SAR value of a
phone is the result of an extensive testing, measuring and calculation process.
It does not represent how much RF the phone emits. All phone models are
tested at their highest value in strict laboratory settings. But when in operation,
the SAR of a phone can be substantially less than the level reported to
the FCC. This is because of a variety of factors including its proximity to a
base station antenna, phone design and other factors. What is important to
remember is that each phone meets strict federal guidelines. Variations in
SARs do not represent a variation in safety. All phones must meet the federal
standard, which incorporates a substantial margin of safety. As stated above,
variations in SAR values between different model phones do not mean
variations in safety. SAR values at or below the federal standard of 1.6 W/kg are
considered safe for use by the public. The highest reported SAR values of the
Coast are:
Cellular CDMA mode (Part 22):
Head: 0.33 W/kg; Body-worn: 1.21 W/kg
PCS mode (Part 24):
Head: 1.45 W/kg; Body-worn: 0.88 W/kg
BC10 CDMA mode (Part 90):
Head: 0.39 W/kg; Body-worn: 1.33 W/kg
FCC Radio Frequency Emission
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
+ Reorient the direction of the internal antennas.
+ Increase the separation between the equipment and receiver.
+ Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
+ Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Emission
This phone meets the FCC Radio Frequency Emission Guidelines.
FCC ID number: V65S2151
Owner’s Record
The model number, regulatory number, and serial number are located on a
nameplate inside the battery compartment. Record the serial number in the
space provided below. This will be helpful if you need to contact us about your
phone in the future.
Model: Coast, Serial No.:
Warranty
Your phone has been designed to provide you with reliable, worry-free service.
If for any reason you have a problem with your equipment, please refer to the
manufacturer’s warranty in this section.
Kyocera Communications, Inc. (“KYOCERA”) offers you, the original purchaser
who has purchased the enclosed subscriber unit (”Product”) only from an
authorized dealer in the United States, a limited warranty that the Product,
including accessories in the Product’s package, will be free from defects in
material or workmanship as follows:
A. ONE (1) YEAR LIMITED WARRANTY: For a period of one (1) year from the date
of original purchase, KYOCERA will, at its option, either repair or replace a
defective Product (with new or rebuilt parts/replacements).
B. LIMITED WARRANTY ON REPAIRED/REPLACED PRODUCTS: For a period
equal to the remainder of the limited warranty period on the original Product
or, on warranty repairs which have been effected on Products for 90 days after
the date of its repair or replacement, whichever is longer, KYOCERA will repair
or replace (with new or rebuilt parts/replacements) defective parts or Products
used in the repair or replacement of the original Product under the Limited
Warranty on it.
Proof that the Product is within the warranty period in the form of a bill of sale
or warranty repair document that includes the date of purchase, Product serial
number and the authorized dealer’s name and address must be presented to
obtain warranty service.
This limited warranty is not transferable to any third party, including but not
limited to any subsequent purchaser or owner of the Product. Transfer or resale
of a Product will automatically terminate warranty coverage with respect to it.
This limited warranty covers batteries only if battery capacity falls below 80%
of rated capacity or the battery leaks. Also this limited warranty does not
cover any battery if (i) the battery has been charged by a battery charger not
specified or approved by KYOCERA for charging the battery, (ii) any of the seals
on the battery are broken or show evidence of tampering, or (iii) the battery has
been used in equipment other than the Kyocera device for which it is specified.
This limited warranty covers the Product only as originally supplied and does
not cover and is void with respect to the following: (i) Products which have been
improperly installed, repaired, maintained or modified (including the antenna);
(ii) Products which have been subjected to misuse (including Products used in
conjunction with hardware electrically or mechanically incompatible or Products
used with software, accessories, goods or ancillary or peripheral equipment
not supplied or expressly authorized by KYOCERA for use), abuse, accident,
physical damage, abnormal use or operation, improper handling or storage,
neglect, exposure to fire, water or excessive moisture or dampness or extreme
changes in climate or temperature; (iii) Products operated outside published
maximum ratings; (iv) cosmetic damage; (v) Products on which warranty stickers
or Product serial numbers have been removed, altered, or rendered illegible;
(vi) customer instruction; (vii) cost of installation, set up, removal or reinstallation;
(viii) signal reception problems (unless caused by defect in material or
workmanship); (ix) damage the result of fire, flood, acts of God or other acts
which are not the fault of KYOCERA and which the Product is not specified
to tolerate, including damage caused by mishandling and blown fuses; (x)
consumables (such as memory cards, fuses, etc.); (xi) third party software or
applications, data and equipment not originally supplied with the Product; (xii)
any Product in which the software has not been updated to the current version;
(xiii) any Product in which the operating system has been unlocked (allowing
installation of a third party operating system); or (xiv) any Products which have
been opened, repaired, modified or altered by anyone other than KYOCERA or
a KYOCERA authorized service center. Before returning any Product for service,
be sure to back up data and remove any confidential, proprietary, or personal
information from the Product. KYOCERA is not responsible for damage to or
loss of any software, applications, data or removable storage media.
This warranty is valid only in the United States.
REPAIR OR REPLACEMENT, AS HEREIN ABOVE PROVIDED, IS YOUR SOLE
AND EXCLUSIVE REMEDY FOR BREACH OF THE LIMITED WARRANTY.
KYOCERA SHALL HAVE NO LIABILITY FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO LOSS OF
PROFITS, LOST SALES, LOSS OF DATA, LOSS OF USE OF THE PRODUCT,
OR ANTICIPATED PROFITS ARISING OUT OF USE OR INABILITY TO USE
ANY PRODUCT (FOR EXAMPLE, WASTED AIRTIME CHARGES DUE TO THE
MALFUNCTION OF A PRODUCT OR LOST APPLICATIONS). THIS WARRANTY
DOES NOT COVER PRODUCTS SOLD “AS IS” OR “WITH ALL FAULTS.”
KYOCERA MAKES NO OTHER EXPRESS WARRANTY WITH RESPECT TO THE
PRODUCTS. THE DURATION OF IMPLIED WARRANTIES, INCLUDING IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE IS LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY.
Some States do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied warranty
lasts, so the above limitations or exclusions may not apply to you.
This limited warranty gives you specific legal rights, and you may have other
rights which vary from State to State. To obtain warranty service, contact
Kyocera Communications, Inc.
Attention : Customer Services for Wireless Products
Phone : 1-800-349-4478
Web : http://www.kyocera-wireless.com
End Users License Agreement
Kyocera Communications, Inc. (“Kyocera”) End User License
Agreement
CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS
(“AGREEMENT”) BEFORE USING OR OTHERWISE ACCESSING THE
SOFTWARE OR SERVICES PROVIDED WITH YOUR KYOCERA DEVICE. THE
SOFTWARE AND SERVICES PROVIDED WITH YOUR KYOCERA DEVICE ARE
SOLELY FOR PERSONAL USE BY YOU, THE ORIGINAL END USER, AS SET
FORTH BELOW.
BY ACTIVATING, USING, DOWNLOADING OR INSTALLING THIS KYOCERA
DEVICE AND/OR THE SOFTWARE PROVIDED WITH IT, YOU ARE AGREEING
TO BE BOUND BY THE TERMS OF THIS LICENSE AGREEMENT. IF YOU
DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT,
DO NOT USE, DOWNLOAD OR OTHERWISE ACCESS THE SOFTWARE OR
SERVICES AND (I) PROMPTLY RETURN THE SOFTWARE OR SERVICE TO
KYOCERA OR DELETE IT; OR (II) IF YOU HAVE PURCHASED THE KYOCERA
DEVICE ON WHICH THE SOFTWARE OR SERVICE IS PRE-INSTALLED,
PROMPTLY RETURN THE DEVICE AND THE ACCOMPANYING SOFTWARE
(INCLUDING DOCUMENTATION AND PACKAGING) TO KYOCERA OR THE
KYOCERA AUTHORIZED DISTRIBUTOR FROM WHICH YOU PURCHASED THE
KYOCERA DEVICE.
License: Subject to the terms and conditions of this Agreement and any other
terms that may be incorporated by reference or otherwise presented to you
prior to your use of the Software, Kyocera grants you a limited, non-exclusive,
license to use Kyocera and third party proprietary software and services
found on your Kyocera device and/or packaged with your Kyocera device,
including any updates to such material by whatever means provided, and any
related documentation (“Software”). You may use the Software only as expressly
authorized by this Agreement.
Limitations: This Software is licensed for use only on the single Kyocera
device you originally purchased. You acknowledge and agree that ownership
of the Software and all other rights associated with the Software not expressly
granted in this Agreement are retained by Kyocera or its suppliers or licensors.
You are not permitted to, in any way, distribute the Software or make it available
over a network for use on more than the single Kyocera device for which it
was originally supplied. The Software may be copied only as permitted by
applicable law and as necessary for backup purposes. You may not remove
any proprietary notices or labels on the Software or any copies thereof. You
may not in any way, modify, reverse engineer, decompile, disassemble or
create derivative works based on the Software (except to the extent that this
restriction is expressly prohibited by law). You agree that you will not attempt
to circumvent, disable or modify any security technology associated with the
Software. You may use the Software only in a manner that complies with all
applicable laws in the jurisdictions in which you use it, including, but not limited
to, applicable restrictions concerning copyright and other intellectual property
rights and/or the export control regulations.
Some of the Software packaged with your Kyocera device may be provided by
third parties (“Third Party Software”). Third Party Software may also be available
from third party content distributors such as application stores. Third Party
content may be subject to different or additional terms and conditions as
determined by the Third Party Software provider. THIRD PARTY SOFTWARE IS
NOT A KYOCERA PRODUCT. KYOCERA IS NOT RESPONSIBLE FOR AND HAS
NO LIABILITY WITH REGARD TO THIRD PARTY SOFTWARE.
Open Source Software: The Software contains certain open source software
which may be subject to the GNU General Public License (“GPL”), GNU Library/
Lesser General Public License (“LGPL”) and/or other copyright licenses,
disclaimers and notices (“Open Source License Terms”). The applicable Open
Source License Terms for the corresponding Open Source Software are
reproduced and available at http://www.opensource.org/licenses. Please refer
to the Open Source License Terms regarding your rights under such licenses
to the Open Source Software. To the extent any such agreement requires that
Kyocera provide you the rights to copy, modify, distribute or otherwise use any
Open Source Software that are inconsistent with the limited rights granted
to you in this Agreement, then such rights in the applicable Open Source
License shall take precedence over the rights and restrictions granted in this
Agreement, but solely with respect to such Open Source Software.
Disclaimer of Warranty and Liability: THE SOFTWARE IS PROVIDED “AS
IS” WITHOUT WARRANTY OF ANY KIND. KYOCERA FURTHER DISCLAIMS
ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, NONINFRINGEMENT, TITLE, ACCURACY, CORRESPONDENCE
WITH DESCRIPTION AND SATISFACTORY QUALITY. TO THE MAXIMUM
EXTENT PERMISSIBLE BY LAW, THE ENTIRE RISK ARISING OUT OF THE USE
OR PERFORMANCE OF THE SOFTWARE REMAINS WITH YOU. IN NO EVENT
WILL KYOCERA, ITS EMPLOYEES, OFFICERS, SHAREHOLDERS, LICENSORS,
SUPPLIERS, CARRIER OR DISTRIBUTOR CUSTOMERS OR AFFILIATES
BE HELD LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT,
SPECIAL, PUNITIVE, OR OTHER DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER
PECUNIARY LOSS) ARISING OUT OF THIS AGREEMENT OR THE USE OF OR
INABILITY TO USE THE SOFTWARE, WHETHER BASED IN CONTRACT, TORT
(INCLUDING NEGLIGENCE), STRICT PRODUCT LIABILITY OR ANY OTHER
THEORY, EVEN IF KYOCERA HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES AND EVEN IF ANY LIMITED REMEDY IS DEEMED TO
HAVE FAILED ITS ESSENTIAL PURPOSE. KYOCERA’S TOTAL LIABILITY FOR
ANY DAMAGES UNDER THIS AGREEMENT SHALL NEVER EXCEED THE
PURCHASE PRICE YOU PAID FOR THE KYOCERA DEVICE.
No software is fault free. The Software is designed for use in systems that do
not require fail-safe performance. You may not use the software in any device
or system in which a malfunction of the software would result in foreseeable
risk of loss, injury or death to any person. This includes operation of nuclear or
infrastructure facilities, medical equipment, aircraft navigation or communication
systems or use in risky or dangerous situations or environments.
Consent to Use of Data: You agree that Kyocera, its affiliates and its
designated agents may collect and use technical and related information,
gathered in any manner, as part of its product support services. Kyocera, its
affiliates and designated agents may use this information solely to improve its
products or to provide customized services or technologies to you. Kyocera
will collect and use this information in accordance with its privacy policy and
accordance with applicable data protection laws. Kyocera, its affiliates and
designated agents may disclose this information to others, but not in a form
that personally identifies you.
Modification of Software and Terms of Use: Kyocera reserves the right to
from time to time modify any portion of the Software. Kyocera may be required
to take these actions due to restrictions from third party licensors or due to
safety or security concerns or government restrictions or court orders.
Kyocera reserves the right to modify the terms of this Agreement at its sole
discretion. Any such modification will be effective upon Kyocera or a Kyocera
affiliate or agent sending notice to you by email, text message, other electronic
communication or postal mail. Your continued use of the Software after such
notice will constitute your binding acceptance of the Agreement as revised.
Additionally, some Software may be subject to different or additional terms
presented to you through a separate click-through or other type of agreement
or notice prior to your use of such Software.
Termination: This License Agreement will automatically terminate without notice
from or action by Kyocera if you fail to comply with any term hereof.
Governing Law: This Agreement is governed by the laws of State of California
except any conflict of law provisions. The U.N. Convention on Contracts for
the International Sales of Goods is hereby excluded in its entirety from this
Agreement.
Severability: If any provision of this Agreement is found to be invalid, illegal or
unenforceable, the validity, legality or enforceability of the remaining provisions
will not in any way be impacted or impaired.
Entire Agreement: By using or otherwise accessing the Software, you
agree that this Agreement sets forth the entire agreement between you and
Kyocera with regard to the Software and supersedes all prior agreements,
notwithstanding the terms of any such agreements.
Printed in Mexico 5KKZ002012XX-
©2013 Boost Worldwide, Inc. All Rights Reserved. Boost, the Logo, Re-Boost and Boost Mobile are trademarks of
Boost Worldwide, Inc. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. KYOCERA is a registered
trademark of Kyocera Corporation.
boostmobile.com

Navigation menu