Koden Electronics RB719A Marine Radar RA55 User Manual C15 5 4 6 3Preset2 1

Koden Electronics Co., Ltd Marine Radar RA55 C15 5 4 6 3Preset2 1

C15

60 RA51/52/53/54/55 INSTRUCTION MANUAL – 05 5.5.4.6.3 Changing the settings in PRESET2 screen (1) Press the "MENU" key, select SETUP>CUSTOM>PRESET2, and press "ENT". This will open a screen for setting various preset parameters that control the operation of your radar. (2) Select items with the up-down cursor pad keys and options with the left-right keys. The selected item will be enclosed in a frame and the current option setting will be highlighted. (3) After you've completed making settings, exit from the PRESET2 screen by pressing "ENT". a) Guard Zone Level Guard zone detection level setting. 1: High sensitivity for smaller targets through 7: to sense large targets only b) Guard Zone Mode Guard zone detection mode setting IN:----- Detect target when it moves inside the zone OUT:-- Detect target when it leaves target zone c) Hold Hold the radar image for 30 seconds after you switch to ST'BY. The EBL and VRM can be used in HOLD state. d) Display Unit Mode Display unit operation mode setting RDR:-- Radar mode(normal) MONI:-Monitor mode (for slave display use) NAV:-- Navigation mode (for DATA indicator use) e) External Buzzer External buzzer control setting OFF:-- Buzzer off CONT:Continuous tone INT:---- Intermittent tone f) Bearing pulse/rot.(IN) To change the setting when connected to another type of radar in monitor mode. g) Bearing pulse/rot.(OUT) To change the setting when connected to another type of radar monitor unit h) Built-in simulator Demonstration mode i) Interference Rejection Reject interference from other radars nearby OFF:-- IR OFF IR1:---- ON level 1 IR2:---- ON level 2 j) Boat Speed How the radar will determine and display your boat's speed PRESET2 GZ LVL 1 2 3 4 5 6 7 GZ MODE I N OUT HOLD ON OFF DISPLAY RDR MONI NAVI EXT BUZ OFF CONT INT IN P /R 1080 1024 2048 4096 360 OUT P/R 1080 1024 2048 4096 360 DEMO ON OFF IR OFF IR1 IR2 SPD SET NMEA MANU 0.0KT LOG 200P LANGUAGE CHI DAN ENG FRE GER GRE ITA JPN KOR NOR POR RUS SPA SWE TUR THA SCAN SPEED STD HIGH COLOR MONO MULTI a) Guard Zone Level b) Guard Zone Mode c) Hold d) Display Unit Mode e) External Buzzer f) Bearing pulse/rot (IN) g) Bearing pulse/rot (OUT) h) Built-in Simulator i) Interference Rejection j) Ship's Speed k) Indication Language l) Scan speed m) Echo Color
RA51/52/53/54/55 INSTRUCTION MANUAL – 05 61 NMEA:-Data input from NMEA port MANU:-Set speed manually with the control knob LOG: Speed input from dry contact log (Select input pulse rate with control knob) k) Display Language CHI: Chinese KOR: Korean DAN: Danish NOR: Norwegian ENG: English POR: Portuguese FRE: French RUS: Russian GER: German SPA: Spanish GRE: Greek SWE: Swedish ITA: Italian TUR: Turkish JPN: Japanese THA: Thai l) Scan Speed Scanning speed setting STD: --Standard HIGH: High ( This setting can be changed only in the stand-by mode.) m) Echo Color Video presentation switch MONO:Yellow or Green monochrome MULTI:Red to Green multi-color HOLD function POWER = POWER key to press The HOLD function is only available in standby mode that momentarily freezes the radar picture. In this mode, you can use VRMs and EBLs and, as far as the operation continues the picture stays frozen. If you leave these controls, the timer starts to count and after 30 seconds the screen will be put back automatically to normal ST’BY mode. Setting HOLD POWER (Operation) ↓ ↓ ↓ (Under Tx) ↑<-------Under HOLD mode--->↑<-----------ST’BY DISPLAY???-- Turn to transmission off EBL,VRM operation:X seconds X+30seconds (Time used) NOTE: EBL and VRM function is usable in HOLD state. ST’BY HOLD “HOLD” is displayed and blinks. Tx OFF X+30secSetting HOLD EBLs and VRMs can be used to locate a target.

Navigation menu