Koden Electronics RB719A Marine Radar RA55 User Manual C14 5 4 6 2Preset1 1

Koden Electronics Co., Ltd Marine Radar RA55 C14 5 4 6 2Preset1 1

C14

58 RA51/52/53/54/55 INSTRUCTION MANUAL – 05 a) Heading Flash b) Stern Mark c) North Mark d) ST'BY screen e) Buzzer Volume f) VRM Unit g) Water temperature h) Depth Unit i) EBL Mode j) Waypoint Mode k) Heading Input l) Heading Type m) Cursor position n) TX Pulse 5.5.4.6.2 Changing the settings in PRESET1 screen (1) Press the "MENU" key, select SETUP>CUSTOM>PRESET1, and press "ENT". This will open a screen for setting various preset parameters that control the operation of your radar. (2) Select items with the up-down cursor pad keys and options with the left-right keys. The selected item will be enclosed in a frame and the current option setting will be highlighted. (3) After you've completed making settings, exit from the PRESET1 screen by pressing "ENT". Pulse Table configuration will be displayed when you select a number in the P TABLE entry (n). a) Heading Flash Each revolution of the antenna turns the heading marker off then on. b) Stern Mark Turn a stern line on or off c) North Mark Display the direction of North (requires Heading input). d) ST'BY screen Selecting which screen is displayed when the radar goes into standby mode. NAVI:--------Navigation Data screen. NOR:---------Normal radar display screen. e) Buzzer Volume Set the volume of the internal warning buzzer. f) VRM Unit Set the VRM unit NM:-----------Nautical mile KM:-----------Kilometer SM:-----------Statute mile g) Water temperature Set the water temperature unit °C:------------Celsius °F:------------Fahrenheit h) Depth Unit Set the Depth unit M:-------------Meter FT:------------Feet FM:-----------Fathom i) EBL Mode Set the Mode of EBL REL:---------Relative bearing from HM TRUE:-------True bearing MAG:--------Magnetic bearing Heading Marker Stern Marker.75 .25 HU PRESET1 HM FLASH ON _OFF_ STERN M ON _OFF_ NORTH M ON _OFF_ ST’BY _NAVI_ NOR BUZ VOL OFF LOW _HIGH_ RM UNIT _NM_ KM SM TEMP °C_ °F DEPTH _M_ FT FM EBL BRG _REL_ TRUE MAG WP BRG _TRUE_ MAG HEAD INPUT _NMEA_ SIN/COS 12BIT 10BIT HEAD TRUE _MAG_ +MK MODE _DIST / BRG_ LAT / LON P TABLE 0 _1_ 2 .5 .75 1.5 3 6 P TABLE _1_ SHORT 0 0 0 1 1 LONG 0 1 1 2 2 (a) (b)
RA51/52/53/54/55 INSTRUCTION MANUAL – 05 59 j) WayPoint Mode Set the Waypoint bearing mode TRUE:-------True bearing MAG:--------Magnetic bearing k) Heading Source Set the Heading source; NMEA SIN/COS:---Compass Data with SIN/COS signal 12BIT:-------Compass Data with 12bits serial signal 10BIT:-------Compass Data with 10bits serial signal l) Heading Type Heading Information Type setting MAG:--------Magnetic bearing TRUE:-------True bearing m) Cross cursor position display mode DIST/BRG:-Range and Bearing indication LAT/LON:--Latitude and Longitude indication (requires GPS input) n) Transmitting pulse width Select pulse setting for various ranges P TABLE PULSE TYPE 0.25 NM 0.5 NM 0.75 NM 1.5NM 3 NM 6 NM 12 NM RA51/52 RA53/54 RA55 P TABLE 0 SHORT 0 0 0 0 0 1 2 3 3 LONG 0 0 0 1 1 2 2 3 3 PULSE TYPE 0.25 NM 0.5 NM 0.75 NM 1.5NM 3 NM 6 NM 12 NM RA51/52 RA53/54 RA55 P TABLE 1 SHORT 0 0 0 0 1 1 2 3 3 LONG 0 0 1 1 2 2 2 3 3 PULSE TYPE 0.25 NM 0.5 NM 0.75 NM 1.5NM 3 NM 6 NM 12 NM RA51/52 RA53/54 RA55 RA51/52 RA53/54 RA55 P TABLE 2 SHORT 0 0 0 1 1 1 2 2 2 3 3 LONG 0 1 1 2 2 2 3 3 2 3 3 Note: RA51/52 Pulse width 0 : 0.08 uS, 1 : 0.25 uS, 2 : 0.8 uS RA53/54 Pulse width 0 : 0.08 uS, 1 : 0.3 uS, 2 : 0.6 uS 3 : 1.0 uS RA55 Pulse width 0 : 0.08 uS, 1 : 0.3 uS, 2 : 0.6 uS 3 : 1.2 uS

Navigation menu