KONICA MINOLTA AERODRP5 AeroDR SYSTEM 2 User Manual Short Term Confidential 2

KONICA MINOLTA, Inc. AeroDR SYSTEM 2 Short Term Confidential 2

Contents

(Short-Term Confidential) User Manual_2

45Chapter 3General OperationsThischapterdescribesgeneraloperationmethodsofthisdevice.
4631  Startup and shutdown312  Startup of this deviceThestartupmethodsofthisdeviceareasfollows. AeroDR Interface Unit, AeroDR Generator Interface Unit and Access Point• ThestartupmethodsoftheAeroDRInterfaceUnit,AeroDRGeneratorInterface UnitandAc-cessPointareasfollows.1  Turn the power switch of the AeroDR In-terface Unit on, and conrm that the LED (green) lights PowerswitchLED(green)2  When the power switch of the AeroDR Interface Unit is turned on, power is also supplied to the AeroDR Generator Inter-face Unit, and the LED (green) will ashLED(green)HINT •••••••••••••••••••••••••••••••••••••• InAeroSyncmode,theAeroDRGeneratorInterfaceUnitisnotused.•••••••••••••••••••••••••••••••••••••••••••••••••••••Normally,thisdeviceisusedwiththepoweron.Whennotusedformorethan1day,operatethestart-up/shutdownasfollows.Reference••••••••••••••••••••••••••••••••••••••Refertothe"OperationManual"oftheimageprocessingcontrollerregardingon/offfortheimageprocessingcontroller.•••••••••••••••••••••••••••••••••••••••••••••••••••••311  Startup sequence of this deviceThestartupsequenceofthisdeviceisasfollows. When using AeroDR Interface Unit1AeroDRInterfaceUnitAeroDRGeneratorInterfaceUnitAccessPoint2Imageprocessingcontroller3AeroDRDetector4AeroDRBatteryCharger/AeroDRBatteryCharger2ConrmthattheAeroDRDetectorisreadyforuseontheimageprocessingcontroller. When using AeroDR Interface Unit21AeroDRInterfaceUnit2AccessPoint2Imageprocessingcontroller3AeroDRDetector4AeroDRBatteryCharger/AeroDRBatteryCharger2ConrmthattheAeroDRDetectorisreadyforuseontheimageprocessingcontroller.
3.1Startupandshutdown47Chapter 33  When the power switch of the AeroDR Interface Unit is turned on, power is sup-plied to the Access Point, and  the LED (umber) on the Access Point will light LED(umber) AeroDR Interface Unit2 and Access Point• ThestartupmethodsoftheAeroDRInterfaceUnit2andAccessPointareasfollows.1  Turn the power switch of the AeroDR In-terface Unit2 on, and conrm that the De-tector Connection LED (green) and Gen-erator Interface LED (green) light PowerswitchDetectorConnectionLED(green)GeneratorInterfaceLED(green)HINT •••••••••••••••••••••••••••••••••••••• IttakestimefortheGeneratorInterfaceLED(green)tolight.•••••••••••••••••••••••••••••••••••••••••••••••••••••2  When the power switch of the AeroDR Interface Unit2 is turned on, power is sup-plied to the Access Point, and  the LED (umber) on the Access Point will lightLED(umber) Image processing controller• Starttheimageprocessingcontrollerbyturningthepowerswitchoftheimageprocessingcon-trolleron. AeroDR Detector• IftheAeroDRDetectorisinsertedintotheAero-DRBatteryCharger/AeroDRBatteryCharger2withawirelessconnection,theAeroDRDetectorshouldberemoved.• Forawiredconnection,conrmthattheAeroDRUFCableortheAeroDRI/FCableisconnectedsecurelytothewiredconnectionconnectoroftheAeroDRDetector.• Next,pressthepowerswitchoftheAeroDRDe-tectorfor2secondsandturniton,andconrmthattheLED(green)isslowlyashingorlit.LED(green)Powerswitch AeroDR Battery Charger• Whenthepowercableisconnectedtothewalloutlet,poweroftheAeroDRBatteryChargeristurnedon.ConrmthattheLED(green)isslowlyashing.LED(green)
3.1Startupandshutdown48 AeroDR Battery Charger2• Turnthe powerswitchoftheAeroDR BatteryCharger2on,andconrmthattheLED(green)isslowlyashing.LED(green)Powerswitch313  Shutdown sequence of this device Thestartupsequenceofthisdeviceisasfollows. When using AeroDR Interface Unit1AeroDRDetector2Imageprocessingcontroller3AeroDRInterfaceUnitAeroDRGeneratorInterfaceUnitAccessPoint4AeroDRBatteryCharger/AeroDRBatteryCharger2 When using AeroDR Interface Unit21AeroDRDetector2Imageprocessingcontroller3AeroDRInterfaceUnit2AccessPoint4AeroDRBatteryCharger/AeroDRBatteryCharger2
3.1Startupandshutdown49Chapter 3314  Shutdown of this deviceTheshutdownmethodsofthisdeviceareasfollows. AeroDR Detector• PressthepowerswitchoftheAeroDRDetectorfor5secondstoturnitoff,andconrmthattheLED(green)isturnedoff.LED(green)Powerswitch Image processing controller• Turnthepowerswitchoftheimageprocessingcontrolleroff,andshutdowntheimageprocess-ingcontroller. AeroDR Interface Unit, AeroDR Generator Interface Unit and Access Point• TheshutdownmethodsoftheAeroDRInterfaceUnit,AeroDRGeneratorInterfaceUnitandAc-cessPointareasfollows.1  Turn the power switch of the AeroDR In-terface Unit off, and conrm that the LED (green) is turned off2  When the power switch of the AeroDR Interface Unit is turned off, power supply to the AeroDR Generator Interface Unit is terminated The LED (green) will turn off on the AeroDR Generator Interface Unit LED(green)HINT •••••••••••••••••••••••••••••••••••••• InAeroSyncmode,theAeroDRGeneratorInterfaceUnitisnotused.•••••••••••••••••••••••••••••••••••••••••••••••••••••3  When the power switch of the AeroDR In-terface Unit is turned off, power supply to Access Point is terminated The LED (um-ber) on the Access Point will turn offLED(umber)
3.1Startupandshutdown50 AeroDR Interface Unit2 and Access Point• TheshutdownmethodsoftheAeroDRInterfaceUnit2andAccessPointareasfollows.1  Turn the power switch of the AeroDR In-terface Unit2 off, and conrm that the De-tector Connection LED (green) and Gener-ator Interface LED (green) are turned offPowerswitchDetectorConnectionLED(green)GeneratorInterfaceLED(green)2  When the power switch of the AeroDR Interface Unit2 is turned off, power sup-ply to the Access Point is terminated The LED (umber) on the Access Point will turn offLED(umber) AeroDR Battery Charger• Whenthepowercableisremovedfromthewalloutlet,thepoweroftheAeroDRBatteryChargeristurnedoffandtheLED(green)isturnedoff.LED(green) AeroDR Battery Charger2• Turnthe powerswitchoftheAeroDR BatteryCharger2off,andconrmthattheLED(green)isturnedoff.LED(green)Powerswitch
51Chapter 34  Push the S-SRM’s hand switch up to the second level to perform exposure • ExposureisperformedfromtheX-raydevicetoproduceX-rayimages.• Whentheexposureiscompleted,imagesarestoredintheAeroDRDetectorandwillthenbeconvertedtodigitaldataandsenttotheimageprocessingcontrollersequentially.Secondstageswitch5  Check  that  the  exposed  image  is  dis-played on the image processing control-ler IMPORTANT•••••••••••••••••••••••••••••••••••••• TheAeroDRDetectorisprecisionequipment,andthereforeimpactorvibrationduringradiographyorim-agetransfermayaffecttheimagequality.BecarefulwhenhandlingtheAeroDRDetectorduringandjustafterradiography.•••••••••••••••••••••••••••••••••••••••••••••••••••••HINT •••••••••••••••••••••••••••••••••••••• IftheAeroDRDetectorremainsunusedforalongtime(timecanbeset)ittransitionstothesleepmode.• Whentheimageprocessingcontrollerisreadytoex-pose,itrecoversfromthesleepmode.•••••••••••••••••••••••••••••••••••••••••••••••••••••Reference•••••••••••••••••••••••••••••••••••••• Regardingtheoperationoftheimageprocessingcon-troller,refertothe"OperationManual"oftheimageprocessingcontroller.•••••••••••••••••••••••••••••••••••••••••••••••••••••321  ExposureExposurewiththisdeviceisperformedwiththefollow-ingprocedure. Exposure under the basic connection ex-ample1 Perform examination registration with the image processing controller 2  Check that this device is ready to expose images,  and  then prepare for the  expo-sure 3  Push the exposure switch of the X-ray de-vice to perform the exposure • Whentheexposureiscompleted,imagesarestoredintheAeroDRDetectorandwillthenbeconvertedtodigitaldataandsenttotheimageprocessingcontrollersequentially.4  Check  that  the  exposed  image  is  dis-played on the image processing control-ler  Exposure under the S-SRM connection ex-ample 1  Perform examination registration with the image processing controller 2  Check that this device is ready to expose images,  and  then prepare for the  expo-sure 3  Push the S-SRM’s hand switch to the rst stage • TheexposurepreparationsignalissenttotheX-raydevice.Firststageswitch32  Operation of AeroDR Detector
3.2OperationofAeroDRDetector52322  AeroDR Detector orientationChangetheorientationoftheAeroDRDetectorac-cordingtotheexposurebodypart.Exposewiththetriangularmarkupwardwhenexpos-inginportrait,andwiththetriangularmarktothesidewhenexposinginlandscape. When exposing in portraitX-rayX-raydeviceThetriangularmarkisupward When exposing in landscapeX-rayX-raydeviceThetriangularmarkistotheleftorrightIMPORTANT••••••••••••••••••••••••••••••••••••• Thesidewiththetriangularmarkistheexposuresur-face.• Whenexposing inlandscape,the directionof thetriangularmarkissetaccordingtoexposureenviron-ment.• Radiographyisnotallowedonasubjectinahorizon-talpositionwhenanAeroDR1717HQisused.••••••••••••••••••••••••••••••••••••••••••••••••••••323  Precautions for exposureDuringexposuregiveadequateattentiontothefollow-ingitems. High-dose exposure• Whenhigh-doseexposuresareperformedcon-tinuously,afterimagesofthelastexposurewilloccasionallybevisible.Theaffectofafterimagesinthisdevicecanberesolvedbyleavinglongerintervalsbetweenexposures,somaketheinter-valsbetweenexposureslongerthanusualwhenperforminghigh-doseexposure.• Duringhigh-doseexposure,continualuseofaleadorothermarkeratthesamepositioncancauseburninginoftheafterimage.Therefore,avoidusingitinthesameposition.Also,ifimageburn-inisvisible,runcalibration. Exposure time• Selectthemaximumexposuretimefrom0.7,1.7,and3.2.• AeroDRDetectorswhosemaximumexposuretimecanbesetto4.0,6.7,10.3areasfollows.AeroDR DetectorSerial NumberFirst four digits NumberAeroDR1417HQ A5DP 50198ormoreAeroDR1012HQ A5TE 51001ormore• Theexposuretimeforactualexposuresshouldnotexceedthemaximumexposuretimeyouhaveset.Otherwise,exposuremayfailorcorrectim-agesmaynotbeabletobeobtained.IMPORTANT•••••••••••••••••••••••••••••••••••••• Ifyouincreasethemaximumexposuretime,theAeroDRDetectormaytakelongertoexitsleepmode.• Setexposuretimetowithin0.8secondswhentheAeroSyncmodeisused.••••••••••••••••••••••••••••••••••••••••••••••••••••HINT •••••••••••••••••••••••••••••••••••••• Usetheimageprocessingcontrollertosetthemaxi-mumexposuretime.Insomecases,themaximumexposuretimeisxedaccordingtotheX-raydevice.Fordetails,contactKonicaMinoltatechnicalrepresen-tatives.• WhenusingImagePilotastheimageprocessingcon-troller,itisnotpossibletochangethemaximumexpo-suretime.•••••••••••••••••••••••••••••••••••••••••••••••••••••
3.2OperationofAeroDRDetector53Chapter 3 Exposure switch• Iftheexposureswitchremainshelddown,itmayresultinanafterimagebecomingvisible.Onceexposureisnished,releasetheexposureswitchimmediately. Grid• Usethefollowinggridwhenexposing.Griddensity 40lp/cmor34lp/cmGridratio VarietyConvergencedistanceVarietyAngleerror40lp/cm:1.0°orless34lp/cm:1.7°orlessIMPORTANT•••••••••••••••••••••••••••••••••••••• ForanAeroDR1417Swithoutthe"1417S"identica-tion,useagridwithagriddensityof34lp/cmandanangleerrorof0.5°orless.1417SAeroDR P-12( )Identication• Whenthe"AeroSyncmode"isused,useagridwithagridratioof8orless.• AcappedgridisrecommendedwhenlayingthegridovertheAeroDRDetectoronthetabletoporforexpo-surewiththeportableX-raydiagnosticdevice.••••••••••••••••••••••••••••••••••••••••••••••••••••• Exposure area• ThesizelinesofAeroDRDetectorindicatetheexposuresize.• Duringexposure,placetheexposurebodypartwithinthewhitelinesonthefourcorners.WhitelinesWhitelinesSizelines S-SRM connection• WhenS-SRMconnectionisadopted,makesuretoperformexposureusingthehandswitchcon-nectedtotheAeroDRInterfaceUnit2andAeroDRGeneratorInterfaceUnit.• IfexposureisperformedusingthehandswitchontheoperationpaneloftheX-raydevice,exposuresynchronizedtotheAeroDRSYSTEMisnotpos-sible.IMPORTANT•••••••••••••••••••••••••••••••••••••• Ifyourestarttheimageprocessingcontroller,alsorestarttheAeroDRInterfaceUnit/AeroDRInterfaceUnit2.•••••••••••••••••••••••••••••••••••••••••••••••••••••
3.2OperationofAeroDRDetector54 Wired connection• Whenperformingexposurewithawiredconnec-tion,fastenthewiredcablehorizontallytothewiredconnectionconnectoroftheAeroDRDetec-tor.Ifconnectedatanangle,transverse(noise)sometimesgetsintoacquiredimagesafterexpo-sure.Connectitsuchthatthereisnospace. Wireless communications environment• Withawirelessenvironment,itispossiblethaterrorssuchasnowirelessconnection,wirelesscommunicationterminates,andlengthenedexpo-surecycletimemightoccur.HINT •••••••••••••••••••••••••••••••••••••• Problemswithawirelesscommunicationsenviron-mentcanoccurinthefollowingconditions:– InstalledlocationoftheAccessPointisnotgood.– Wheninsertedinthewallstand,table,orstretcher,theopeninginthewallstandortableistoosmallandthereisnopassagefortheradiowaves.– Theradiowavesarenotemittedduetometalpartsclosetotheantenna,whichchangestheantennacharacteristics.– ForexposureswherethebodytouchestheAeroDRDetectordirectly,theradiowavesarenotemittedifthebodycompletelycoverstheantennasposi-tionedin2places.– Otherdevicesusethesameradioband,andcauseinterference.••••••••••••••••••••••••••••••••••••••••••••••••••••• AED (Automated External Debrillator)• WhenanAED(AutomatedExternalDebrillator)isused,movetheAeroDRDetectorawayfromthepatient.HighvoltageandhighcurrentmayresultinabreakdownoftheAeroDRDetector. The operating temperature environment of AeroDR Detectors• IfanAeroDRDetectorisleftclosetoorincontactwithaheatgeneratorsuchaselectriccarpet,itssafetydevicemaybeactivatedandtheAeroDRDetectormayfailtoworkproperly. Identify the AeroDR Detector that users can use in Aero Sync mode• ConrmthatifthefollowingidenticationisintheAeroDRDetectorthatuserscanuseinAeroSyncmode.( )AeroDR P-111417HQIdenticationAeroDR Detector Identication AeroDR1417HQ 1417HQAeroDR1717HQ 1717HQAeroDR1012HQ 1012HQIMPORTANT•••••••••••••••••••••••••••••••••••••• UserscannotuseAeroSyncModeintheAeroDRDe-tectorifitisAeroDR1417S.• UserscannotuseAeroSyncmodeintheAeroDRDetectoriftherstfourdigitsofitsSerialNumberareshowninthefollowingtableintheAeroDR1417HQorAeroDR1717HQ.AeroDR Detector SerialNumber that cannot be usedAeroDR1417HQ A45YAeroDR1717HQ A54T•••••••••••••••••••••••••••••••••••••••••••••••••••••
3.2OperationofAeroDRDetector55Chapter 3 Exposure with the Aero Sync mode• TouseagridinAeroSyncmode,aligntheorien-tationofthetriangularmarkoftheAeroDRDe-tectorwiththegridbarasshowninthefollowinggure.AeroDRDetectorGridGridbarTriangularmark• Donotuseadditionalltersforexposuredosere-duction.
56ChargetheAeroDRDetectorwhentheLED(blue)ontheAeroDRDetectorlightsorashes,orwhenthebat-terylevelgetslowinthestatusdisplayoftheAeroDRDetectorontheimageprocessingcontroller.IMPORTANT•••••••••••••••••••••••••••••••••••••• Duringcharging,iftheAeroDRDetectorshouldbe-comehot,stopchargingimmediately.• Ifchargingerrorsoccurrepeatedly,contactKonicaMi-noltatechnicalrepresentatives.•••••••••••••••••••••••••••••••••••••••••••••••••••••HINT •••••••••••••••••••••••••••••••••••••• TheAeroDRDetectorcanbechargedwhenthepoweriseitheronoroff.• TheAeroDRDetectorcan be used while stoppingcharginginprogress.• TochargetheAeroDRDetectorwiththeAeroDRBat-teryChargerwhenyoudonotuseitforalongtimesuchasduringthenight,chargetheAeroDRDetectorwithitspowerturnedoff.• Evenifyouusethebatteryequippedwiththisdeviceforrepeatedquickcharginganduse,deteriorationofbatterylifeissmallcomparedtoalithium-ionbattery.•••••••••••••••••••••••••••••••••••••••••••••••••••••331  Charging with AeroDR  Battery ChargerInsertingtheAeroDRDetectorintotheAeroDRBatteryChargerperformschargingoftheAeroDRDetector.1  Conrm that the LED (green) of the Aero-DR Battery Charger is slowly ashing 2  Slowly insert the AeroDR Detector with its ex-posure side pointed toward the operator until the buzzer sounds When inserted, charging of the AeroDR Detector beginsInsert from the sideExposuresideSlide slowlyInsert from the front (top)ExposuresideLoad slowlyExposuresideInserted3  Once the AeroDR Detector is inserted cor-rectly and charging starts, the LED (blue) on the AeroDR Battery Charger will light4  Once charging of the AeroDR Detector is completed, the LED (blue) on the AeroDR Battery Charger will turn offIMPORTANT•••••••••••••••••••••••••••••••••••••• HandletheAeroDRDetectorwithextremecarewheninsertingitintotheAeroDRBatteryCharger.• TheLEDoftheAeroDRDetectorisnotvisiblewhentheAeroDRDetectorisinsertedintotheAeroDRBat-teryCharger.• ThewiredconnectionconnectoroftheAeroDRDe-tectormaybecomewarmrightafterchargingontheAeroDRBatteryCharger.Thisoftenoccursduringchargingandisnotamalfunction.• TheAeroDR1012HQcannotbechargedintheAero-DRBatteryCharger.•••••••••••••••••••••••••••••••••••••••••••••••••••••HINT •••••••••••••••••••••••••••••••••••••• Ifthereisanyproblemduringcharging,theLED(or-ange)ontheAeroDRBatteryChargerwilllight.Also,chargingwillstopwhenanerroroccurs.•••••••••••••••••••••••••••••••••••••••••••••••••••••33  Charging of AeroDR Detector
3.3ChargingofAeroDRDetector57Chapter 35  Remove the AeroDR Detector from the AeroDR Battery Charger• PulltheAeroDRDetectortoremoveit.332  Charging with AeroDR Battery Charger2InsertingtheAeroDRDetectorintotheAeroDRBatteryCharger2performschargingoftheAeroDRDetector.1  Conrm that the LED (green) of the Aero-DR Battery Charger2 is slowly ashing 2  Slowly insert the AeroDR Detector with its exposure side pointed toward the op-erator until the buzzer sounds When in-serted, charging of the AeroDR Detector beginsExposuresideLoad slowlyExposuresideInserted
3.3ChargingofAeroDRDetector58HINT •••••••••••••••••••••••••••••••••••••• AeroDR1717HQisinsertedExposureside• AeroDR1012HQisinsertedExposureside•••••••••••••••••••••••••••••••••••••••••••••••••••••3  Once the AeroDR Detector is inserted cor-rectly and charging starts, the LED (blue) on the AeroDR Battery Charger2 will ash or light• TheLED(blue)ontheAeroDRBatteryCharger2changesaccordingtothelevelofbatterypoweroftheAeroDRDetector.Battery level LED display2%orlessSlowashing(blue)3to49%LitandSlowashing(blue)50to79%LitandSlowashing(blue)80%ormoreLit(blue)4  Once charging of the AeroDR Detector is completed, all the LEDs (blue) on the AeroDR Battery Charger2 will turn onIMPORTANT•••••••••••••••••••••••••••••••••••••• HandletheAeroDRDetectorwithextremecarewheninsertingitintotheAeroDRBatteryCharger2.• ThewiredconnectionconnectoroftheAeroDRDe-tectormaybecomewarmrightafterchargingontheAeroDRBatteryCharger2.Thisoftenoccursduringchargingandisnotamalfunction.•••••••••••••••••••••••••••••••••••••••••••••••••••••HINT •••••••••••••••••••••••••••••••••••••• Ifthereisanyproblemduringcharging,theLED(or-ange)ontheAeroDRBatteryCharger2willlight.Also,chargingwillstopwhenanerroroccurs.•••••••••••••••••••••••••••••••••••••••••••••••••••••5  Remove the AeroDR Detector from the AeroDR Battery Charger2• TilttheAeroDRDetectorinthedirectionshowninthefollowinggureandremoveit.IMPORTANT•••••••••••••••••••••••••••••••••••••• AstheAeroDRDetectorislockedbyamagnet,donotpullitouthorizontallyorvertically.•••••••••••••••••••••••••••••••••••••••••••••••••••••
3.3ChargingofAeroDRDetector59Chapter 3333  Charging with the wired cableConnectingtheAeroDRUFCableorAeroDRI/FCabletotheAeroDRDetectorperformschargingoftheAero-DRDetector.1  Conrm that the LED (green) of the Aero-DR Interface Unit or the Detector Connec-tion LED (green) and Generator Interface LED (green) of the AeroDR Interface Unit2 light2  Securely connect the AeroDR I/F Cable or AeroDR UF Cable to the wired connection connector on the AeroDR Detector Once it is connected, the AeroDR Detector will start chargingWhen the AeroDR I/F Cable is connectedWhen the AeroDR UF Cable is connected3  Once the charging of the AeroDR Detector is higher than 10%, the LED (blue) on the AeroDR Detector will go outHINT •••••••••••••••••••••••••••••••••••••• Conrmcompletionoffullchargeandthelevelofbat-terypowerwiththeimageprocessingcontroller.• Ifthereisanyproblemduringcharging,theLED(or-ange)ontheAeroDRDetectorwilllight.Also,chargingwillstopwhenanerroroccurs.•••••••••••••••••••••••••••••••••••••••••••••••••••••334  Charging time guideTofullychargetheAeroDRDetectorrequiresthefol-lowingchargingtime.ChargingstatusChargingtimeoftheAeroDRDetectorwhenthepowerisoffAeroDR1417HQAeroDR1417SAeroDR1717HQAeroDR1012HQViatheAeroDRBatteryCharger Approx.30min -ViaAeroDRBat-teryCharger2 Approx.60min Approx.30minViawiredcable Approx.60min Approx.30minIMPORTANT•••••••••••••••••••••••••••••••••••••• WhentheAeroDRDetectorison,thechargingtimewillbeslightlylongerasitdependsontheoperationstatus.•••••••••••••••••••••••••••••••••••••••••••••••••••••335  AeroDR Detector charg-ing displayTheAeroDRDetectorLED(blue)changesaccordingtothelevelofbatterypower.Batterylevel LEDdisplayLessthan3%(exposurenotpossible) Lit(blue)Lessthan5% Fastashing(blue)Lessthan10% Slowashing(blue)10%ormore OffIMPORTANT•••••••••••••••••••••••••••••••••••••• Whenthebatteryrunsdowncompletely,alltheLEDsgoout.ConfirmthattheLED(green)eitherlightsorasheswhenyouperformexposure.•••••••••••••••••••••••••••••••••••••••••••••••••••••
60ByregisteringtheAeroDRDetectorintheimageprocess-ingcontrollerusingoneofthefollowingmethods,theAero-DRDetectorcanbemovedbetweenexposurerooms.• InsertitintotheAeroDRBatteryCharger/AeroDRBatteryCharger2• ConnecttheAeroDRI/FCableorAeroDRUFCabletothewiredconnectionconnectorIMPORTANT•••••••••••••••••••••••••••••••••••••• AeroDR1012HQcannotberegisteredwiththeAero-DRBatteryCharger.• WhenusingImagePilotastheimageprocessingcon-troller,itisnotpossibletomovetheAeroDRDetectorbetweendifferentexposurerooms.• Onceitisregisteredinanewexposureroom,itwillnotbeusableinthepreviousexposureroom.Whenreturningtoapreviousexposureroom,performtheregistrationoperationagain.•••••••••••••••••••••••••••••••••••••••••••••••••••••341  Registration with AeroDR Battery ChargerToregistertheAeroDRDetectorintheAeroDRBatteryCharger,followtheprocedurebelow.1  Make sure that all the devices in the destina-tion exposure room are usable2 Insert the AeroDR Detector into AeroDR Bat-tery Charger in the destination exposure room• Registrationprocesswillstart.Exposureside3  Once  the  registration  is  completed,  a buzzer will sound on the AeroDR Battery Charger, and the LED (green) will change from slow ashing to lit LED(green)34  Registration and selection of the AeroDR Detector4  Conrm that the AeroDR Detector icon is displayed on the image processing con-trollerIMPORTANT•••••••••••••••••••••••••••••••••••••• When anAeroDRBatteryChargerexclusively forchargeisused,conrmthatthebatterychargerinthedestinationhasa"Chargeandregistration"label.•••••••••••••••••••••••••••••••••••••••••••••••••••••HINT •••••••••••••••••••••••••••••••••••••• Charging willalsostartwhentheAeroDR DetectorisinsertedintotheAeroDRBatteryCharger,andtheAeroDRBatteryChargerLED(blue)willlight.•••••••••••••••••••••••••••••••••••••••••••••••••••••342  Registration with AeroDR Battery Charger2ToregistertheAeroDRDetectorintheAeroDRBatteryCharger2,followtheprocedurebelow.1 Make sure that all the devices in the destina-tion exposure room are usable2  Insert the AeroDR Detector into AeroDR Battery Charger2 in the destination expo-sure room• Registrationprocesswillstart.Exposureside
3.4RegistrationandselectionoftheAeroDRDetector61Chapter 33  Once  the  registration  is  completed,  a buzzer will sound on the AeroDR Battery Charger2, and the LED (green) will change from slow ashing to lit LED(green)4 Confirm that the AeroDR Detector icon is displayed on the image processing control-lerHINT •••••••••••••••••••••••••••••••••••••• Charging willalsostartwhentheAeroDR DetectorisinsertedintotheAeroDRBatteryCharger,andtheAeroDRBatteryChargerLED(blue)willlightorash.•••••••••••••••••••••••••••••••••••••••••••••••••••••343  Registration with the wired cableTo registertheAeroDRDetector by connectingtheAeroDRI/FCableorAeroDRUFCabletothewiredconnectionconnector,followtheproceduresbelow.1  Make sure that all the devices in the desti-nation exposure room are usable2  Securely connect the AeroDR I/F Cable or AeroDR UF Cable to the wired connection connector on the AeroDR Detector • Registrationprocesswillstart.When the AeroDR I/F Cable is connectedWhen the AeroDR UF Cable is connected3  Conrm that the AeroDR Detector icon is displayed on the image processing con-troller344  Selection of the AeroDR DetectorAnAeroDRDetectorisselectedasfollowsdependingonthenumberregisteredoneachimageprocessingcontroller.Number of reg-istered AeroDR DetectorsSelection method1•AeroDRDetectorisselectedautomaticallywhenthatAeroDRDetectorisreadytobeselected.•TheAeroDRDetectorisnotse-lectedifitisnotsetinawallstandortablethatmatchestheorderinformation.Multiple•TheAeroDRDetectorthatwasselectedimmediatelybeforehandwillbeselectedautomaticallyifitisreadytobeselected.•IfthereisnoAeroDRDetectorinthewallstandortablethatmatchestheorderinformation,noAeroDRDetectorwillbeselected.HINT •••••••••••••••••••••••••••••••••••••• TheLED(green)oftheselectedAeroDRDetectorislit.•••••••••••••••••••••••••••••••••••••••••••••••••••••
3.4RegistrationandselectionoftheAeroDRDetector62345  Manual selection of the AeroDR DetectorSelectingtheAeroDRDetectormanuallyisperformedwiththefollowingprocedure.1  Press the selection switch of the AeroDR Detector that will be used for 2 seconds or longerSelectionswitch2  After  selection  is  completed,  the  LED (green) of the AeroDR Detector is litReference•••••••••••••••••••••••••••••••••••••• TheAeroDRDetectorcanalsobeselectedmanuallyfromtheimageprocessingcontroller.Fordetails,refertothe"OperationManual"oftheimageprocessingcontroller.•••••••••••••••••••••••••••••••••••••••••••••••••••••
63Chapter 335  CalibrationInorderfortheAeroDRDetectortoprovideoptimalim-ages,performthecalibrationeverythreemonths.Thecalibrationisperformedwiththeimageprocessingcontroller.IMPORTANT•••••••••••••••••••••••••••••••••••••• Itisnecessarytoperformthegaincalibrationperiodi-callytocompensateforchangesovertimeorchangesintheexposureenvironment.• FullychargetheAeroDRDetectorbeforethecalibra-tion.• Performbywaitingatleast10minutesaftertheprevi-ousexposure.•••••••••••••••••••••••••••••••••••••••••••••••••••••Reference•••••••••••••••••••••••••••••••••••••• Forthecalibration,refertothe"UserToolOperationManual"orthe"OperationManual"oftheimagepro-cessingcontroller.•••••••••••••••••••••••••••••••••••••••••••••••••••••
6436  Position to afx AeroDR Detector identication label Whenusingmorethan1AeroDRDetectorandafx-ingidenticationlabels(stickers)totheoutsideoftheAeroDRDetectors,itisrecommendedtoafxthela-belstothe2places((1),(2))shownasfollows.Position to afx AeroDR Detector identication labelPositiontoafxAeroDRDetectoridenticationlabel(recommended)(1)PositiontoafxAeroDRDetectoridenticationlabel(recommended)(2)IMPORTANT••••••••••••••••••••••••••••••••••••••Afxthelabelsonlyintherecommendedplaces.Fail-uretodosomaycausethelabelstocomeofforimageunevennesstooccur.••••••••••••••••••••••••••••••••••••••••••••••••••••HINT •••••••••••••••••••••••••••••••••••••• Useofcommerciallyavailablevinyl(Tepra,etc.)labelsarerecommendedfortheidentificationlabels(stickers).Whenpossible,uselabelsthatdonoteasilypeeloff.• Itisrecommendedtowritethenameandidenticationnumberregisteredintheimageprocessingcontrolleronthelabel.••••••••••••••••••••••••••••••••••••••••••••••••••••
65Chapter 4Status (LED) DisplayThischapterdescribestheLEDdisplaypatternsandthestatusoftherespectivedevices.
66StatusoftherespectivedevicescanbeconrmedwithLEDs.Checkthestatusoftherespectivedevices,referringtothe"LEDdisplaypattern".LED display pattern Notation Display patternOffSlowashingFastashingOn411  AeroDR Detector: Status LED (green)Display pattern StatusShutdownconditionStandingbyAeroDRDetectorbeingselectedExposing*Duringstartup/shutdownprocessing,italsoashesfastandislit.: Busy/error LED (orange)Display pattern StatusShutdownconditionorstandingbyExposingorperformingmaintenanceErroroccurred*Duringstartup/shutdownprocessing,italsoashesfastandislit.: Battery LED (blue)Display pattern StatusShutdownconditionorbatterylevelis10%oraboveBatterylevelislessthan10%Batterylevelislessthan5%Batterylevelislessthan3%*Duringstartup/shutdownprocessing,italsoashesfastandislit.41  LED display of respective devices
4.1LEDdisplayofrespectivedevices67Chapter 4412  AeroDR Interface Unit: Power LED (green)Display pattern StatusShutdownconditionOperatingCH1: Feeding1 LED (blue)Display pattern StatusShutdownconditionorfeeding1isnotconnectedtotheAeroDRDetectorTheAeroDRDetectorisconnectedtofeeding1CH2: Feeding2 LED (blue)Display pattern StatusShutdownconditionorfeeding2isnotconnectedtotheAeroDRDetectorTheAeroDRDetectorisconnectedtofeeding2
4.1LEDdisplayofrespectivedevices68413  AeroDR Interface Unit2Detector Connection LED: Power LED (green)Display pattern StatusShutdownconditionOperatingCH1: Feeding1 LED (blue)Display pattern StatusShutdownconditionorfeeding1isnotconnectedtotheAeroDRDetectorTheAeroDRDetectorisconnectedtofeeding1CH2: Feeding2 LED (blue)Display pattern StatusShutdownconditionorfeeding2isnotconnectedtotheAeroDRDetectorTheAeroDRDetectorisconnectedtofeeding2Generator Interface LED: Power LED (green)Display pattern StatusShutdownconditionOperatingandnotconnectedtotheimageprocessingcontrollerOperatingandconnectedtotheimageprocessingcontrollerBusy/Error : Busy/error LED (orange)Display pattern StatusShutdownconditionorstandingbyExposingorperformingmaintenanceErroroccurred
4.1LEDdisplayofrespectivedevices69Chapter 4414  AeroDR Generator Interface Unit: Power LED (green)Display pattern StatusShutdownconditionOperatingandnotconnectedtotheimageprocessingcontrollerOperatingandconnectedtotheimageprocessingcontrollerBusy/Error : Busy/error LED (orange)Display pattern StatusShutdownconditionorstandingbyExposingorperformingmaintenanceErroroccurred
4.1LEDdisplayofrespectivedevices70415  AeroDR Battery ChargerStatus: Status LED (green)Display pattern StatusShutdownconditionOperatingRegistrationprocessingoftheinsertedAeroDRDetectoriscomplete* BecausethechargerdedicatedforchargingdoesnotperformregistrationprocessingoftheAeroDRDetector,thestatusLEDal-waysashesslowly.Error : Error LED (orange)Display pattern StatusShutdownconditionoroperatingnormallyErroroccurredCharge: Feeding LED (blue)Display pattern StatusShutdownconditionorstandingbyforinsertionoftheAeroDRDetectorBatterychargedduringAeroDRDetectorinsertionAeroDRDetectorbatterycharging
4.1LEDdisplayofrespectivedevices71Chapter 4416  AeroDR Battery Charger2Charge: Feeding LED (blue)Display pattern StatusShutdownconditionorstandingbyforinsertionoftheAeroDRDetectorAeroDRDetectorbatterycharging(batterylevelislessthan2%)AeroDRDetectorbatterycharging(batterylevelis3to49%)AeroDRDetectorbatterycharging(batterylevelis50to79%)AeroDRDetectorbatterycharging(batterylevelishigherthan80%)Error : Error LED (orange)Display pattern StatusShutdownconditionoroperatingnormallyErroroccurredStatus: Status LED (green)Display pattern StatusShutdownconditionOperatingRegistrationprocessingoftheinsertedAeroDRDetectoriscomplete* BecausethechargerdedicatedforchargingdoesnotperformregistrationprocessingoftheAeroDRDetector,thestatusLEDal-waysashesslowly.
4.1LEDdisplayofrespectivedevices72417  Access PointHINT •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Theillustrationsandexplanationmerelyshowsanexample.•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••CannotbeusedwiththisdeviceCannotbeusedwiththisdevicePoE(umber)STATE(green/red)CLIENT(green)FAULT(red)WLAN(umber)BRIDGE(green)SIGNAL(green)LED Lighting color Lighting pattern StatusPoE Umber On Powerisbeingsupplied.FAULT Red Flashing Errorisoccurring.STATE Green/RedGreen/on Lightswhenoperationpreparationiscompleted.Red/on Errorisoccurring.SIGNAL Green On Signalstrengthofwireless.(Onlyinclientmode)BRIDGE Green On Operatinginbridgemode.CLIENT Green On Operatinginclientmode.WLAN Umber On OperatinginwirelessLANmode.(Normal)
73Chapter 5TroubleshootingThischapterdescribesproblemsthatmayoccuranderrorcodesthatmaybedisplayed,andhowtoresolveeachofthem.
7451  Support ow during troubleIfthefollowingproblemsoccurwithanyofthesedevices,consulttherespectivereferencesforcountermeasures.Status DeviceReference for countermeasuresAeroDRDetectorAeroDRGeneratorInterfaceUnitConsultthe"OperationManual"oftheimageprocessingcontrol-lertotakethecountermeasures.Errorcodeisdisplayed.AeroDRBatteryCharger2Consult"5.2.5AeroDRBatteryCharger2"totakethecounter-measures.AeroDRInterfaceUnit2AeroDRDetectorAeroDRGeneratorInterfaceUnitConfrmtheerrorcodedisplayedontheimageprocessingcontrol-ler,andperformcorrectiveactions.AeroDRBatteryChargerConsult"5.2.4AeroDRBatteryCharger"totakethecounter-measures.ErrorLEDlights.AeroDRInterfaceUnit2
5.1Supportowduringtrouble75Chapter 5Status DeviceReference for countermeasuresAeroDRDetectorConsult"5.2.1AeroDRDetec-tor"totakethecountermea-sures.AeroDRInterfaceUnitConsult"5.2.2AeroDRInter-faceUnit"totakethecounter-measures.AeroDRBatteryCharger2Consult"5.2.5AeroDRBatteryCharger2"totakethecounter-measures.AeroDRBatteryChargerConsult"5.2.4AeroDRBatteryCharger"totakethecounter-measures.AccessPoint Consult"5.2.6AccessPoint"totakethecountermeasures.Troublehasoccurredineachdevice.(Troubleotherthanerrorcodedis-playandaliterrorLED)ImageprocessingcontrollerConsult"5.2.7Imageprocess-ingcontroller/Images"totakethecountermeasures.Imageprocessingcontrollerorimagerelatedtroublehasoc-curred.AeroDRInterfaceUnit2Consult"5.2.3AeroDRInter-faceUnit2"totakethecounter-measures.
7652  Various problems and countermeasuresIfthefollowingproblemsoccurwithanyofthesedevices,consulttherespectivereferencesforcountermeasures.IMPORTANT•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Afterperformingcountermeasures,iftheproblemdoesnotgoaway,contactKonicaMinoltatechnicalrepresentatives.•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••HINT •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Whenanerrormessagehasbeendisplayedintheimageprocessingcontroller,checktheerrordescriptionandcountermea-sureslistedinthe"OperationManual"oftheimageprocessingcontroller.•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••521  AeroDR DetectorStatus Error description Corrective actionsTheAeroDRDetectordoesnotstartup.Powerdoesnotgoonevenwhenthepowerswitchispressedfor2secondsorlonger.Thebatterymightbeout.Chargeitasfollows.Then,startit.• InsertingitintotheAeroDRBatteryChargerformorethan2minutes• InsertingitintotheAeroDRBatteryCharger2formorethan6minutes• Connectingawiredcableformorethan6minutesTheAeroDRDetectordoesnotshutdown.Powerdoesnotgooffevenwhenthepowerswitchispressedfor5secondsorlonger.Itisnotpossibletoshutdownwhileexposing.Shutdownafterexposureisended.ThestatusLED(green)islit,andthebusy/errorLED(orange)ashesrapidly.("Ready"isnotdisplayedontheimageprocessingcontroller)Systemerrorisoccurring.Ifabusy/errorLED(orange)continuestoashafter10minuteshaselapsed,shutdowntheAeroDRDetector.Or,when"Ready"isnotdisplayedontheim-ageprocessingcontroller,restartit.WhentheAeroDRDetectorisplacedonasmoothsurface,theAeroDRDetectorisnotstablyat-tachedtothesmoothsurface.AeroDRDetectoriswarped.IftheAeroDRDetectorisstillwarpedevenafterthedetectorisplacedonasmoothsurface,contactKonicaMinoltatechnicalrepresentatives.Theprotectivecoverisdeformed. ContactKonicaMinoltatechnicalrepresentatives.TheAeroDRDetectorwillnotgointothewallstandortable.AeroDRDetectoriswarped.IftheAeroDRDetectorisstillwarpedevenafterthedetectorisplacedonasmoothsurface,contactKonicaMinoltatechnicalrepresentatives.Theprotectivecoverisdeformed. ContactKonicaMinoltatechnicalrepresentatives.TheAeroDRDetectorcannotbeinsertedintheAeroDRBatteryCharger/AeroDRBatteryCharger2.Theprotectivecoverisdeformed.ForeignmaterialisinthewiredconnectionconnectoroftheAeroDRDetector.Referto"6.1.2Cleaning"andremovetheforeignmaterial.ForeignmaterialisinthebottomoftheAeroDRBatteryCharger/AeroDRBatteryCharger2.ContactKonicaMinoltatechnicalrepresentatives.TheAeroDRI/FCablecannotbeconnectedtotheAeroDRDetector.PartofthewiredconnectionconnectoroftheAeroDRDetectorisdeformed.ThespringconnectoroftheAeroDRI/FCableisdeformed.
5.2Variousproblemsandcountermeasures77Chapter 5Status Error description Corrective actionsTheAeroDRI/FCablecannotbeconnectedtotheAeroDRDetector.ForeignmaterialisinthewiredconnectionconnectoroftheAeroDRDetector. Referto"6.1.2Cleaning"andremovetheforeignmaterial.ForeignmaterialisinthespringconnectorontheAeroDRI/FCable.Theshockwatchchangescolortored. PossibleexcessiveshocktoAeroDRDetector.ContactKonicaMinoltatechnicalrepresentatives.OnlywiredconnectionwiththeAeroDRDetectorcannotbeused.Thewiredcableisnotconnectedproperly. Checkthatthewiredcableisproperlycon-nectedtotheAeroDRDetector.OnlywirelessconnectionwiththeAeroDRDetectorcannotbeused.ThereisanerrorintheAccessPoint. CheckthattheEthernetcableisproperlycon-nectedtotheAccessPoint.TheAeroDRDetectorandAccessPointarebeingusedunderpoorconditions.• Wirelessdoesnotconnect• Wirelesscommunicationterminates• CycletimeisextendedChecktheinstallationlocationofAeroDRDetectorandAccessPoint.Whenperformanceisnoticeablylowerthanattheinitialinstallationofthisdevice,itispos-siblethattheinstallationenvironment/usageenvironmenthavechanged.AeroDRDetectorwiredconnec-tionconnectorisheartedup.AeroDRDetectorwiredconnectionconnec-torisheatedupimmediatelyafterchargingwithAeroDRBatteryCharger/AeroDRBatteryCharger2.Thisiscausedbychargingandisnotamal-function.Chargingsometimestakeslon-ger.Chargingtakeslongerwhenthebatteryisoverdischarged.Ittakestimeforinternalcomponentstostart.Becauseitisnotabnormal,waitabit.BatteryLED(blue)ashesfast.Usagetimewiththebatteryhasgottenshorter. Itcouldbethatthechargingfunctionofthebatteryhasdeteriorated.Itcanbereplacedwithanewbatteryforafeeifnecessary.Thenumberofimagesthatcanbeexposedhasdecreased.Thechargingtimehasgottenshorter.Noimageisacquired.* NoimageappearsafterX-rayexposure.(1)Checkthefollowingitems.•Didyouperformexposurein"Ready"status?•Aretheexposureconditionscorrect?•WasX-rayoutputlowered?•WasX-rayvoltagesettoalowervalue?(2)Setthesensitivitysettingoftheimageprocessingcontrollerto"High"beforeexposure.Ifthesettingwasalreadyat"High",increasethevoltageoftheX-rayandperformexposure.Readinghasautomaticallystarted.*ThemachinestartsreadingtheimagewithoutX-rayexposure.(1)Checkthefollowingitems.•WastheAeroDRDetectorsubjectedtostrongshocksorvibrationswhile"Ready"wasdisplayed?•Isthesensitivitysettingoftheimagepro-cessingcontrollercorrect?(Isthesensitivitysettingoftheimageprocessingcontroller[High]?)(2)Usecautiontopreventstrongshocksorvibrationsandrestartexposure.Exposurewasperformedinaconditionotherthanwhentheex-posurewiththeimageprocessingcontrollerwaspossible.*Exposurewasperformedwhen"Ready"wasnotdisplayedontheimageprocessingcon-troller.Consequently,acorrectimagewasnotacquired.Waitforoneminuteormorebeforestartingthenextexposure.Exposurewasperformedwhen"Ready"wasnotdisplayed.Waitfor30secondsormorebeforestartingthenextexposure.* TroubleshootingintheAeroSyncmode.IMPORTANT•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Iftheexteriororprotectivecoverisdamagedextensively,orintheeventoftheAeroDRDetectorbeingdroppedorsubjectedtoshock,contactKonicaMinoltatechnicalrepresentatives.•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
5.2Variousproblemsandcountermeasures78522  AeroDR Interface UnitStatus Error description Corrective actionsPowerLED(green)doesnotlight. ACpowernotsupplied. Makesurethepowercableisconnectedcor-rectly.Feeding1/2LED(blue)doesnotlight.Feeding1/2LED(blue)doesnotlightevenwhenconnectingtheAeroDRDetector.MakesurethattheAeroDRI/FCableiscon-nectedcorrectly.Communicationsaredownbetweendevices,andpowerLED(green)isoff.Thepowerswitchisnoton.Or,thepowercableisnotconnected.MakesurethepowerswitchoftheAeroDRInterfaceUnitison.Or,makesurethepowercableisconnectedcorrectly.TheAeroDRDetectorisbeingusedwithwiredconnection,butitisnotrecognizedontheimageprocessingcontroller,andfeeding1/2LEDs(blue)areoff.TheAeroDRI/FCableisnotconnected. MakesurethattheAeroDRI/FCableisconnectedtotheAeroDRDetectorproperly.BatteryisnotchargingwhiletheAeroDRDetectorisusedwithwiredconnection(thebatterylevelonthebatteryleveldisplayoftheimageprocessingcontrollerdoesnotincrease),andfeeding1/2LEDs(blue)areoff.523  AeroDR Interface Unit2Status Error description Corrective actionsPowerLED(green)doesnotlight. ACpowernotsupplied. Makesurethepowercableisconnectedcor-rectly.Feeding1/2LED(blue)doesnotlight.Feeding1/2LED(blue)doesnotlightevenwhenconnectingtheAeroDRDetector.MakesurethattheAeroDRI/FCableiscon-nectedcorrectly.Communicationsaredownbetweendevices,andpowerLED(green)isoff.Thepowerswitchisnoton.Or,thepowercableisnotconnected.MakesurethepowerswitchoftheAeroDRInterfaceUnit2ison.Or,makesurethepowercableisconnectedcorrectly.TheAeroDRDetectorisbeingusedwithwiredconnection,butitisnotrecognizedontheimageprocessingcontroller,andfeeding1/2LEDs(blue)areoff.TheAeroDRI/FCableisnotconnected. MakesurethattheAeroDRI/FCableisconnectedtotheAeroDRDetectorproperly.BatteryisnotchargingwhiletheAeroDRDetectorisusedwithwiredconnection(thebatterylevelonthebatteryleveldisplayoftheimageprocessingcontrollerdoesnotincrease),andfeeding1/2LEDs(blue)areoff.
5.2Variousproblemsandcountermeasures79Chapter 5524  AeroDR Battery ChargerStatus Error description Corrective actionsStatusLED(green)doesnotlight. ACpowernotsupplied. Makesurethatthepowercableisconnectedcorrectly.ErrorLED(orange)ison. - ContactKonicaMinoltatechnicalrepresentatives.WhentheAeroDRDetectorisset,theerrorLED(orange)lights.AeroDRDetectorwasinsertedthewrongway. ChecktheinsertionorientationoftheAeroDRDetector.TheAeroDRDetectorisnotsetcorrectly. MakesurethattheAeroDRDetectorissetcorrectly.AlthoughtheAeroDRDetectorisinserted,chargingdoesnotstart,andthestatusLED(green)isout.ACpowernotsupplied. Makesurethatthepowercableisconnectedcorrectly.AlthoughtheAeroDRDetectorisinserted,itcannotberegistered,andthestatusLED(green)isashing.TheEthernetcableisdisconnected. MakesurethattheEthernetcableisconnectedcorrectly.525  AeroDR Battery Charger2Status Error description Corrective actionsStatusLED(green)doesnotlight.ACpowernotsupplied. Makesurethatthepowercableisconnectedcorrectly.Thepowerswitchisturnedoff. Turnonthepowerswitch.ErrorLED(orange)ison. - ContactKonicaMinoltatechnicalrepresenta-tives.WhentheAeroDRDetectorisset,theerrorLED(orange)lights.AeroDRDetectorwasinsertedthewrongway. ChecktheinsertionorientationoftheAeroDRDetector.TheAeroDRDetectorisnotsetcorrectly. MakesurethattheAeroDRDetectorissetcorrectly.AlthoughtheAeroDRDetectorisinserted,chargingdoesnotstart,andthestatusLED(green)isout.ACpowernotsupplied. Makesurethatthepowercableisconnectedcorrectly.Thepowerswitchisturnedoff. Turnonthepowerswitch.AlthoughtheAeroDRDetectorisinserted,itcannotberegistered,andthestatusLED(green)isashing.TheEthernetcableisdisconnected. MakesurethattheEthernetcableisconnect-edcorrectly.526  Access PointIfaproblemoccursintheAccessPoint,contactKonicaMinoltatechnicalrepresentatives.
5.2Variousproblemsandcountermeasures80527  Image processing controller/ImagesStatus Error description Corrective actionsTransverse(noise)hasgottenintoallimagesacquiredfromtheAeroDRDetector.Thewiredcableisnotconnectedproperly.ConnectthewiredcablespringconnectorunithorizontallytothewiredconnectoroftheAeroDRDetector.Operationisnormal,butprob-lemscanbeseenwithexposureimages.Ithasbeenoccurringfrequentlysinceacer-taintime. Performcalibration.Thereistroubleinonly1image. Checktheexposuremethodandimagepro-cessing.Cannotexposewiththeimageprocessingcontroller.TheimageprocessingcontrollerdoesnotbecomeReady.Checktheimageprocessingcontrollerstartup.Theiconsofdevicesusedontheimagepro-cessingcontrollerarenotdisplayed.Conrmthattheiconofthedevicetobeusedisdisplayedonthesystemmonitorscreen.Whentheiconofthedeviceisnotdisplayed,checkthatthedevicetobeusedisstarted.Or,checkthattheEthernetcableisproperlycon-nected.
81Chapter 6MaintenanceThischapterdescribestheitemsthatrequireperiodicmaintenance.
8261  Maintenance and inspection itemsThischapterdescribestheinspectionsandcleaningrequiredinordertomaintaintheuseofthisdeviceinanoptimumcondition.HINT •••••••••••••••••••••••••••••••••••••• "SimpleCheckQCforCS-7"isavailableforcheck-ingofimagingquality.Pleasecontactourcustomerserviceforthedetail.•••••••••••••••••••••••••••••••••••••••••••••••••••••611  Maintenance scheduleThemaintenanceandinspectionitemsthattheusershouldperformareasfollows.Maintenance taskMainte-nance intervalCheckingandcleaningthesurfaceoftheAeroDRDetectorWeeklyCheckingforexternaldamagetotheAeroDRDetectorWeeklyCleaningthespringconnectorsoftheAeroDRBatteryCharger2,AeroDRI/FCableandAeroDRUFCableWeeklyCleaningthewiredconnectionconnectorsoftheAeroDRDetectorandAeroDRUFCableWeeklyCleaningtheAeroDRBatteryCharger/AeroDRBatteryCharger2WeeklyFullchargeoftheAeroDRDetector MonthlyCalibration Every3monthsIMPORTANT•••••••••••••••••••••••••••••••••••••• Toensureoptimumuseofthisdevice,besuretoperformperiodicmaintenance.• Theabovetaskintervalsareestimatesandvaryaccordingtousage.•••••••••••••••••••••••••••••••••••••••••••••••••••••Reference•••••••••••••••••••••••••••••••••••••• Forthecalibration,refertothe"UserToolOpera-tionManual"orthe"OperationManual"oftheim-ageprocessingcontroller.•••••••••••••••••••••••••••••••••••••••••••••••••••••612  CleaningThecleaningmethodsoftherespectivedevicesareasfollows.IMPORTANT•••••••••••••••••••••••••••••••••••••• Becarefulnottoapplyanycleaningchemicalorliquidontothespringconnectors,thewiredcon-nectionconnectors,andtheLEDs.•Donotcleanwithsharporhardmetalobjects.Ifyoucannotremovestains,contactKonicaMinoltatechni-calrepresentatives.• WearanddeformationoftheprotectivecoverwilloccurwiththeAeroDRDetectorduetothewayitishandled.Theprotectivecovercanbereplacedforafeewhenthedamagebecomesextensive,socontactKonicaMinoltatechnicalrepresentatives.••••••••••••••••••••••••••••••••••••••••••••••••••••• AeroDR Detector• Cleantheexteriorwithasoftlint-freeclothdamp-enedwithasmallamountofanhydrousethanolandwrungwell.• TocleanthegapbetweentheexterioroftheAero-DRDetectorandtheprotectivecover,removedirtusingacommercialplasticbrush.GapbetweentheexteriorandtheprotectivecoverProtectivecoverExteriorIMPORTANT•••••••••••••••••••••••••••••••••••••• IfyoudirectlyapplyorsprayanhydrousethanolontheAeroDRDetector,theliquidwillentertheAeroDRDetectorthroughexteriorgaps,causingafailure.•••••••••••••••••••••••••••••••••••••••••••••••••••••
836.1MaintenanceandinspectionitemsChapter 6 Spring connector• Ifforeignmaterialhasadheredtothespringcon-nectorsoftheAeroDRBatteryCharger2,AeroDRI/FCableandAeroDRUFCable,removeitwithacommercialplasticbrush.AeroDR Battery Charger2SpringconnectorAeroDR I/F CableSpringconnectorAeroDR UF CableSpringconnector Wired connection connector• Ifforeignmaterialhasadheredtothewiredconnec-tionconnectorsoftheAeroDRDetectorandAero-DRUFCable,removeitwithacommercialplasticbrush.AeroDR DetectorWiredconnectionconnectorAeroDR UF CableWiredconnectionconnector AeroDR Battery Charger• CleandustontheinserttableoftheAeroDRBatteryChargerwithasoftlint-freeclothdampenedwithal-coholorwaterandwrungwell.AeroDRDetectorinserttable(side)AeroDRDetectorinserttable(front) AeroDR Battery Charger2• CleandustontheinserttableoftheAeroDRBatteryCharger2withasoftlint-freeclothdampenedwithalcoholorwaterandwrungwell.AeroDRDetectorinserttable
846.1Maintenanceandinspectionitems613  Disinfection of the AeroDR DetectorIfbodilyuidorbloodfromapatienthascontaminatedthesurfaceoftheAeroDRDetector,disinfectwithasoftlint-freeclothdampenedwithasmallquantityofthefollowingdisinfectantandwrungwell.•Ethanolfordisinfection•Isopropanolfordisinfection•Commercialchlorinebleach,or0.5%hypochlorite(10-folddilutionofhouseholdbleach)IMPORTANT•••••••••••••••••••••••••••••••••••••• Bleachandhypochloritearecorrosive,sowashthebleachoffwelltoavoidcorrosion.•BecarefulnottoapplyanychemicalfordisinfectionontothewiredconnectionconnectorsandtheLEDs.• Ifyoudirectlyapplyorspraychemicalfordisinfec-tionontheAeroDRDetector,thesolutionwillentertheinstrumentthroughexteriorgaps,causingafailure.•••••••••••••••••••••••••••••••••••••••••••••••••••••614  ConsumablesIMPORTANT•••••••••••••••••••••••••••••••••••••• Refertoeachdevice’smanualforinformationaboutperiodicreplacementpartsandconsumablesfortheimageprocessingcontroller,etc.• Inparticular,continueduseofthebatterymayre-sultindegradationandwear,anditmaynolongerexhibitproperfunctioningcapabilities.Forextend-ed,safeuse,itisnecessarytoreplacepartswhichhavebecomewornordegraded.•••••••••••••••••••••••••••••••••••••••••••••••••••••
85Chapter 7SpecicationsThischapterdescribesthespecicationsofthisdevice.
8671  SpecicationsIMPORTANT•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Thefollowingspecicationsandgraphsdescribedbelowarenominalvalueswhichmaybedifferentfromactualvaluesandmayvarydependingonenvironmentandfrequencyofuse.(Thesearenottoprovideanyguarantees.)• Allspecicationregardingbatteryisforafully-chargedbattery.••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••711  AeroDR DetectorItem DescriptionProductname(modelname)AeroDR1417HQ(AeroDRP-11)AeroDR1417S(AeroDRP-12)AeroDR1717HQ(AeroDRP-21)AeroDR1012HQ(AeroDRP-31)AeroDRII1417HQ(AeroDRP-51)Detectionmethod IndirectconversionmethodScintillator CsI(CesiumIodide)ExternaldimensionsAeroDR1417HQ/AeroDR1417S/AeroDRII1417HQ383.7(W)×460.2(D)×15.9(H)mm460.2mm15.9mm383.7mmAeroDR1717HQ459.8(W)×460.2(D)×15.9(H)mm 460.2mm15.9mm459.8mmAeroDR1012HQ281.8(W)×333.0(D)×15.9(H)mm 333.0mm15.9mm281.8mmWeightAeroDR1417HQ :2.9kgAeroDR1417S :2.8kgAeroDR1717HQ :3.6kgAeroDR1012HQ :1.7kgAeroDRII1417HQ:X.XkgPixelsize 175umImageareasizeAeroDR1417HQ/AeroDR1417S/AeroDRII1417HQ:348.95×425.25mm(1,994×2,430pixels)AeroDR1717HQ:424.9×424.9mm(2,428×2,428pixels)AeroDR1012HQ:245.7×296.8mm(1,404×1,696pixels)ADconversion 16bit(65,536gradients)Usablegridfrequency 40lp/cm,34lp/cm*Fordetails,referto"3.2.3 Precautionsforexposure".
877.1SpecicationsChapter 7Item DescriptionMaximumpatientweightPointload:150kg@Φ40mmFaceload:300kg@effectiveimageareaoverall*Deadweight,evenwhenloadedontheAeroDRDetector,hasnoeffectonimagesandtheAeroDRDetector.ThemeasurementmethodisbasedonKMstandards.CommunicationAeroDR1417HQ/AeroDR1417S/AeroDR1717HQ/AeroDR1012HQ:DedicatedwiredEthernetconnection/wirelessLAN(IEEE802.11acompliant)AeroDRII1417HQ:DedicatedwiredEthernetconnection/wirelessLAN(IEEE802.11a/b/g/hcompliant)Drivepower Dedicatedpowercabledrive/batterydriveWLANencryption Wirelessencryptionmethod :AESAuthenticationmethod :WPA2-PSKPatientdoses Patientdosesareequivalentto500-1000speedlm/screensystems.Dynamicrange4digitsAir kerma [µGy]DensityPixel valueExposure dose [mR]10001001010.10.01100020003000400010001001010.10.010.0012.531.520.510AeroDR 1417HQ, 1717HQ, 1012HQREGIUS 210 (QR=250)SRO-500/SR-G0AeroDR 1417SMTFPre-sampled MTFAeroDR 1417HQ, 1717HQ, 1012HQAeroDR 1417S10.80.60.40.200120.5 1.5 2.5 3Spatial frequency [cycle/mm]
887.1SpecicationsItem DescriptionDQEDQE [%]AeroDR 1417HQ, 1717HQ, 1012HQ 1mR (8.7µGy)AeroDR 1417S, 1mR (8.7µGy)70605040302010000.5 1.5 2.5 3Spatial frequency [cycle/mm]21Requiredtimeforwired/wirelessswitchingLessthan2secondsBatterytype LithiumioncapacitorBatteryexpectedlifetime AbovetheAeroDRDetectorServicelife
897.1SpecicationsChapter 7712  AeroDR Interface UnitItem DescriptionProductname(modelname) AeroDRInterfaceUnit(AeroDRB-1)AmountofconnectableAeroDRDetectorsWiredconnection:Upto2Wirelessconnection:Upto4AccessPointisnecessarywhenoperatingwireless.Powerrequirements AC100/110/115/120/200/220/230/240V±10%,singlephase50/60HzPowerconsumption WiththeAeroDRDetectorconnected :Approx.80VA(100-240V)WithouttheAeroDRDetectorconnected:Approx.33VA(100-240V)Externaldimensions460(W)×180(D)×285(H)mm180mm460mm285mmWeight 11.5kg713  AeroDR Interface Unit2Item DescriptionProductname AeroDRInterfaceUnit2AmountofconnectableAeroDRDetectorsWiredconnection:Upto2Wirelessconnection:Upto4AccessPointisnecessarywhenoperatingwireless.Powerrequirements AC100/110/115/120/200/220/230/240V±10%,singlephase50/60HzPowerconsumption WiththeAeroDRDetectorconnected :Approx.80VA(100-240V)WithouttheAeroDRDetectorconnected:Approx.33VA(100-240V)Externaldimensions460(W)×180(D)×285(H)mm180mm460mm285mmWeight 12.5kg
907.1Specications714  AeroDR Generator Interface UnitItem DescriptionProductname(modelname) AeroDRGeneratorInterfaceUnit(AeroDRX-1)Powersupply SuppliedfromtheAeroDRInterfaceUnitviatheEthernetcable.Externaldimensions460(W)×180(D)×285(H)mm180mm460mm285mmWeight 7.3kg715  AeroDR Battery ChargerItem DescriptionProductname(modelname) AeroDRBatteryCharger(AeroDRD-1)Batterychargingsystem AutomaticchargingPowerrequirements AC100/110/115/120/200/220/230/240V±10%,singlephase50/60HzPowerconsumption Charging:Approx.161VA(100-240V)Standby:Approx.25VA(100-240V)Externaldimensions560(W)×250(D)×153(H)mm153mm560mm250mmWeight 7.2kg
917.1SpecicationsChapter 7716  AeroDR Battery Charger2Item DescriptionProductname AeroDRBatteryCharger2Batterychargingsystem AutomaticchargingPowerrequirements AC100/110/115/120/200/220/230/240V±10%,singlephase50/60HzPowerconsumption Charging:180VA(100-240V)Standby:30VA(100-240V)Externaldimensions474.2(W)×200(D)×206.7(H)mm206.7mm474.2mm120mm200mmWeight 6kg717  Access PointHINT •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Theillustrationsandexplanationmerelyshowsanexample.•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••Item DescriptionExternaldimensions53.6(W)×135(H)×105(D)mm(withoutantenna)198.5mm105mm 53.6mm135mmWeight 850g
927.1Specications718  AeroDR I/F CableItem DescriptionProductname AeroDRI/FCableCablelength10m/20mExternaldimensions 14mm79mm42mm719  AeroDR UF CableItem DescriptionProductname AeroDRUFCableCablelength2m/5mExternaldimensionsWired connection connector (UIF) side14mm100mm43mmSpring connector (PIF) side14mm79mm42mm7110  AeroDR XG CableItem DescriptionProductnameAeroDRXGCableSet100VAeroDRXGCableSet120VAeroDRXGCableSet220VAeroDRXGCableSet230VAeroDRXGCableSet240VAeroDRXGCableSetDC24V
937.1SpecicationsChapter 77111  AeroDR S-SRM CableItem DescriptionProductnameAeroDRS-SRMCableGEX1AeroDRS-SRMCableCPX1AeroDRS-SRMCablePKX1AeroDRS-SRMCableDEX1AeroDRS-SRMCableHIX1AeroDRS-SRMCableTOX1AeroDRS-SRMCablePHX1AeroDRS-SRMCableDEX2AeroDRS-SRMCableTOX2AeroDRS-SRMCableTOX3AeroDRS-SRMCableTOX4AeroDRS-SRMCableNCAeroDRS-SRMCableQTX1AeroDRS-SRMCableARX1• AeroDRS-SRMCablesissubjecttochangewithoutnotice.• OtherAeroDRS-SRMCablesmaybeaddedwithoutnotice.• SomeAeroDRS-SRMCablesmaynotbeconrmedtocomplywithMDD.7112  General AeroDR SYSTEMItem DescriptionRecommendedstorageandusageenvironmentconditionsWhenoperatingTemperature Humidity10to30°C35to80%RH(ensurenowatercon-densation) 35 %RH80%RH* Limitcontinuoususeinahotandhumidenvironment(35to37°C/95%orlower)ofanincubatortowithin25minutes.Whennotoper-atingTemperature Humidity–10to40°C20to90%RH(ensurenowatercon-densation) 20%RH90%RHInstorage/transportTemperature Humidity–20to50°C*-205020to90%RH(ensurenowatercon-densation) 20%RH90%RH*However,performancewarrantyperiodwhenstoringat50°Cis6monthsafterpacking.Classication SafetyIEC60601-1ClassIOperationmode Continuousoperation
94
0197Operation ManualEN 01A45YBD01EN0120131220CTDIRECT DIGITIZER   AeroDR SYSTEM 2Operation ManualSYSTEM 2DIRECT DIGITIZER

Navigation menu