KMTEL SP-100T Smart Pointer- Transmitter User Manual QMTSP 100T manual

KMTEL Co., Ltd. Smart Pointer- Transmitter QMTSP 100T manual

User Manual

The Smart Pointer guarantees the easiest and most effective way to a better presentationGeneral DescriptionTo make it your presentation better, the Smart Pointer integrates the functions of a page up/down and a laser pointer. The Smart Pointer’s compact and complete design gives you the easy control of presentation slide up/down and mobility needed to concentrate on your presentation at a range of over 20m. Any software and PC programming is not required and a few second is taken for installation to use.
Key FeaturesTerms and ExplanationsLaser ButtonUp ButtonDown ButtonLaser HoleClipLock/UnlockSwitchUSB connectorLED IndicatorLaser Button (R) : Laser on/off controlUp Button (5): Slide up controlDown Button (6): Slide down controlLock/Unlock Switch : To change batteryClip : To fix the transmitter to the bag or cloth LED Indicator Blinking : Connected and waiting for IDOff : ID received and waiting for CMD Off-On-Off : Everytime CMD receivedTransmitterBatteryCover♦Plug and play function -No PC programming and S/W♦Working on any computer-On any computer using a USB port♦Remote control range within 15m with a very low power –Eliminates LOS problems encountered with IR systems♦Transmitter identification -Use thousands of ID number to avoid multi-user interferencesReceiver
Installation and UsageDesktop or Notebook PCUSB port12When you plug a receiver into a USB port, you will see LED indicator is blinking.Push a either down (6) or up (5) button in the transmitter to implant user ID.When ID is set, LED goes to command waiting state. 3Begin your presentation.
1 23 45For Only WIN98 Users
Radio FrequencyBattery Alkaline, 12V/23A USB Bus-powered315 MHz (USA, Asia), 433.92 MHz (Europe)Enclosure Molded plastic (violet, silver, gray, ordered colors)Dimension 115mm(L) ×18mm(H) ×19mm(W) 65mm(L) ×7mm(H) ×20mm(W)Weight 20 grams (w/o battery) 10 grams Laser Pointer with Mouse Control (Transmitter) Laser ModuleInterfaceWavelength: 670nm (Class IIIa)Output Power: 2.5±0.5mWWireless Mouse Control Interface (Receiver)Technical SpecificationsUSB HID Spec., Ver.1.1Operating Current 40mA (LM), 15 mA (RF) 10 ~ 12 mA Battery Change123Push battery coverUnlock switchRotate clipSupported OS Win98/SE/Me/2000/XP,Mac, Linux, WinCE
FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure:-Reorient or relocated the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.-Shielded cables must be used to comply with FCC regulations.WARNINGChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu