KINGTA TECHNOLOGY T2 Bluetooth speaker User Manual 1

KINGTA TECHNOLOGY CO., LTD Bluetooth speaker 1

User manual

User’s ManualIntroduction:you can use this item with tablet,notebook and many types ofTroubleshootingSmart phone to stream music,and enjoy hands free calling.In order to getthe best results when using the device,please read this manual first beforeusing.Feartures-Volume and song control directly on speaker unit-Stunning sound clarity-Ultra portable design-Great for parties, indoor and outdoor-Allow you to make and answer phone calls-TF card can useSpecificationsLoudspeaker: 4Ω 3W*2Package ContentsBuilt-in Power:3.7V/2000mADimensions: L166*W62*H68.2MMSNR:≥80DBWireless Working Frequency: 2.402-2.480GHZWireless Transmission Distance: up to 32 ftCharging Time: 3-4 hoursWeight: 350.3gSpeaker Dimension:40mmCharging: DC5V±0.5/500MA1. Bluetooth Speaker 2. Bluetooth speaker3. Bike Buddy1. Keep this product and its charging cable away from excessive heat.User’s ManualT2Important Safety Precautions2. Do not operate this device with a damaged cable or after it has malfunctioned or has been damaged in any manner.3. Do not disassemble your device.When using your Bluetooth Mobile Speaker, basic safety precautions A Quick Look at Your Deviceshould always be followed, including the following:1. Previous : Press to access the last track in playlist.Press and hold to lower the volume2. Phone : Press this button to activate thethe speaker phone function. When music isplaying, press to play or pause a track. 3. Next : press to access the next track in a a playlist.Long press and hold to increase the volume.4. Charging PortYou can plug one end of the included USB Charging Cable into this jack, while plugging the other end into a USB port on your computer in order to charge your speaker’s built in lithium battery. 5. ON/OFF SwitchPress and hold the“ ”to power on Charging Your Speaker1. Connect one end of the included USB Charging Cable to the Press and hold the“ ”again to power offCharging Port on your speaker. Then plug the other end of the USB Charging Cable into a suitable USB port on your computer to recharge your speaker’s internal rechargeable battery.NOTE: The internal battery of your speaker takes approximately four hours to charge when completely drained.2. When charging, a red LED light will illuminate to indicate that the unit is charging. The red light will turn off when your unit is fully charged.Understanding the LED Status LightsWhen Charging Your SpeakerSolid red LED = ChargingNo red LED = Charge CompleteWhen Pairing Your Speaker to a Bluetooth Audio SourceRapid blinking blue LED: Bluetooth not connected. (Ready to pair.)Pairing Bluetooth Devices to Your SpeakerIn order to pair your Bluetooth audio device to your Bluetooth Speaker for Solid blue LED: Bluetooth connected.lthe first time, follow the steps below:1). Make sure your Bluetooth audio source is held within three meters of your speaker.2). Press and hold the “ ” switch on your speaker to power onThe LED light will blink blue to indicate that you have entered pairing status.3). Go to the Bluetooth Manager of your Bluetooth audio source. Please refer to the User’s Manual of your Bluetooth audio source for more information.4). Search Bluetooth devices and select “T2”.5). Once paired, the blue LED light will be solid and you can use yourspeaker to listen to audio from you Bluetooth sound source.Using the Hands-Free FunctionWhen an iPhone or other smartphone is connected to your speaker follow the steps below to take calls hands-free.1. Press“ ”to pick up the call.2. Press and hold“ ”for 2 sec to reject the call.3. During a call: Press“ ”again to hang up the call.TroubleshootingThe speaker doesn’t connectto device Speaker needs to be connected/paired again to deviceA tone is heard every fewsecondsSpeaker needs to be chargedThe speaker will not power on Speaker needs to be chargedThe speaker doesn’t controltrack(s)/volumeSpeaker needs to be in Bluetooth mode forfull control The speaker sound is distorted at high volumeThe devices’ volume needs to be lowered Bluetooth connection distancecannot reach to 32ft. Avoid operating the Bluetooth speaker in areasof strong electromagnetic interference,such asnear indution cookers,large power fans,motorsetc.Move the speaker closer to Bluetooth device.Fully charge the speaker and try again.Problem Solution14253Audio Cable USB Charging cableT2, BDY-9087, EXTREMEKINGTA TECHNOLOGY CO.,LTD
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu