KINGTA TECHNOLOGY S6 Bluetooth Speaker User Manual

KINGTA TECHNOLOGY CO., LTD Bluetooth Speaker Users Manual

Users Manual

Bluetooth Speaker User’s Manual DescriptionIntroductionThank you for choosing the S6 Speaker as your source for entertainment. You can use this item with iPad, iPhone, iPod and many types of smart-phone to stream music and enjoy hands-free calling. For the best results, please read this manual before using the speaker.Include1. Speaker2. 3.5 mm Audio Cable3. User ManualSpecificationBluetoothRange：33ft（10M）TWSdistance：11.5ft（5M）Dimensions:236mmx59.5mmx102.8mmBTVersion：4.2Output：2x10WSpeaker/driversize：57mm4Ω 10WBattery:7.4V 2400mAh 3CCharging:4 HImportant Safety Information1.Keep this product and its charging cable away from excessive heat;2.Do not operate this device with a damaged cable or after it has malfunctioned or has been damaged in any manner;3.Do not disassemble your device;S61.ON / OFF 2.Next Music/Volume3.Pause/Phone 4.Previous Music/Volume 5.Bluetooth LED 6.Micro USB Charging Port7.AUX in PortFCC ID: N7KS6Model Name: S6
Power onPress and Hold “ ” button 2 seconds to power ON.Power offPress and Hold “ ” button 2 seconds to power OFF.OperationPairingThe unit will automatically go into “Pairing Mode” when it is powered ON.Go into your Bluetooth device settings menu and look for “S6”.After the unit has been paired and connected, it will re-connect automatically when the unit is powered on and the device is in range.Press and hold” ”2 seconds bluetooth will be disconnectedNote: Bluetooth Timeout :10 minutes.Bluetooth ModeBegin Streaming MusicPress “ ” to start playing music.Press and Hold “ ” 2 seconds to play the next track.Press and Hold “ ” 2 seconds to play the previous track.Press either “ ” or “ ” for volume control.Hands-Free FunctionWhen the unit is connected and paired to your device, you can use the hands-free function with its built-in microphone.Press “ ” to accept a call.To end a call press “ ”.Aux-In ModePlug in the supplied 3.5 mm audio cable into the unit. The other end is connected to your device. The unit will automatically enter the Aux-In mode.Please note music and volume can be controlled by your device.ChargingAttach the USB cable to the unit, and plug into any USB charger. If the unit is completely discharged, it will take approximately 4 hours to fully charge.These three key lights “ ” “ ” “ ” will be breath lighting when charging, and they will become solid once fully charged.Note: There will be a beep when the battery is low and needs to be recharged.TWS Wireless Stereo ModeIf you have two pieces S6, you can use TWS function to achieve wireless stereo combined-playing music.1.Make sure both S6 are without any Bluetooth connection.2.Power on both speakers, and touch each other with the side, the two speakers will connect automatically with a notifying tone. When LED blink on one speaker and keeps solid on the other one, it means the TWS connection is successful.3.Then you can search your Bluetooth device and select “S6”.4.Touch them again for Bluetooth Disconnection.5.Press and Hold “ ” button 2 seconds on one of the units, both units will be powered off.Unit doesn’t connect to deviceSpeaker needs to be connected / re-paired to deviceA tone is heard every few secondsSpeaker needs to be rechargedUnit will not power on Speaker needs to be rechargedUnit doesn’t control track(s) / volumeSpeaker needs to be in Bluetooth mode for full controlUnit distorts at high volumeThe devices’ volume needs to be loweredTroubleshooting
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu