KINGTA TECHNOLOGY B29 Bluetooth Speaker User Manual User mnaual

KINGTA TECHNOLOGY CO., LIMITED Bluetooth Speaker User mnaual

Contents

User mnaual

IntroductionThank you for choosing the BT29 as your source fore n t e r t a i n m e n t ! , you can use this item with iPads,iPhones,iPods and many types of smartphone to stream music ,and enjoy handsfree calling.In order to get the best resultswhen using the device,please read this manual first before using.Important Waterproof/Safety InformationImportant: DO NOT submerge the BT29 speaker in water,this unit isnot intended to function properly after being under water.BT29 is rated IPX6,which means the speaker can be heavilysplashed with water or left in the rain(but not submerged in water)for approximately a limited time.If the BT29 gets wet,it isrecommended that you dry the speaker completely before using itagain.Please note:Speaker is not water-resistant when the silicone coveris open.please make sure that cover is closed and secure beforeusing in a wet environment.
Description:1.ON/OFF button2.Play/Pause/Phone3.MIC4.Previous/Volume –5.Next/Volume +6.Blue LED(Bluetooth)7.Red LED(Charging)8.Green LED(AUX)9.Micro USB Charging Port10.AUX in PortIncluded:1.Speaker2.USB Micro Charging Cable3.3.5 mm Audio Cable4.User Manual
SpecificationsSupported Profiles: A2DP, HFP, AVRCPBluetooth Range:33ft (10m)Dimensions: 180 mm x 65 mmBattery: Li-Ion 3.7V, 1000 mAhCharging: 5V @ 500 mAOperationPowering OnPress and Hold "ON/OFF" button 2 seconds to power ON, theBlue LED will start to flash.If an Aux (3.5 mm) cable is connected to the unit, the Blue LEDwill turn off, and the Green LED will stay illuminated,notifying you,the uint is in Aux-In mode. .Powering OffPress and Hold "ON/OFF" button 2 seconds to power OFFBluetooth ModePairingThe unit will automatically go into “Pairing Mode” when it ispowered ON.Go into your Bluetooth device settings menu and look for“BT29”.After the unit has paired and connected, it will re-connectautomatically when the unit is powered on and the deviceis in range.Note: Bluetooth Timeout :10 minutesBegin Streaming MusicPress “ ” to start playing musicPress and Hold“ ” 2 seconds to play the next trackPress and Hold“ ” 2 seconds to play previous trackPress either “ ” or “ ” for volume controlMaking and Receiving Phone CallsWhen the unit is connected and paired to your device,the unit allows you to make or receive phone calls with itsbuilt-in microphone.Press “ ” to accept a callTo end a call press“ ”To place a call, simply dial the number or select a contact fromyour Bluetooth device and callTo reject a call, press and hold “ ” for 2 seconds
Aux-In ModePlug in the supplied 3.5 mm cable into the unit. The other end isconnected to your device. The Green LED will only illuminatewhen in “Aux” mode.Please note music and volume can be controlled by your device.ChargingAttach the USB cable to the unit, and plug into any USB charger.If the unit is completely discharged, it will take approximately 4hours to fully charge.The Red LED will illuminate during charging, when it hascompleted, the Red LED will turn off.Note:There will be a beep when the battery is low and needs tobe rechargedLED StatusBlue LED flashing & Green LED solid Bluetooth ModeGreen LED on solid Aux Mode, Charging CompletedRed LED ChargingTrouble shootingUnit doesn’t connectto device Speaker needs to be connected/re-paired to deviceA tone is heard every few seconds Speaker needs to be chargedUnit will not power on Speaker needs to be chargedUnit doesn’t controltrack(s)/volume Speaker needs to be in Bluetooth mode for full controlUnit distorts at high volume The devices’ volume needs to be loweredFCC Caution.§ 15.19 Labelling requirements.This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.§ 15.21 Information to user.Any Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.§ 15.105 Information to the user.Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.-Consult the dealer or an experienced radio/TV technician for help.* RF warning for Portable device:The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.

Navigation menu