KIDZTECH TOYS 8711116-27MTX R/C Mega Truck User Manual MEGA TRUCK 87101 87111

KIDZTECH TOYS MANUFACTURING LTD R/C Mega Truck MEGA TRUCK 87101 87111

User Manual

ContentsRC Vehicle (Vehicle) x 1RC Transmitter (Transmitter) x 1Antenna for RC Transmitter x 1Instruction Manual x 1Battery Precaution1. Alkaline batteries are recommended to be used2. Only batteries of the same or equivalent type as recommended are to be used3. Do not mix alkaline, standard or rechargeable batteries4. Do not mix old and new batteries or different type of batteries5. Non-rechargeable batteries are not to be charged6. If rechargeable batteries are to be used, they are only to be charged under adult supervision7. Rechargeable batteries are to be removed from the product before they are charged8. Be sure to insert batteries with correct polarities and always follow the battery manufacturer’s instructions9. Remove all batteries from the Vehicle and Transmitter when not in use10. Exhausted batteries are to be removed from the product11. The supply terminals are not to be short-circuited12. Dispose of batteries properly. Do not dispose the batteries in fire – it may cause them to explode or leak causing injury or damage13. Battery installation and removal must only be done by adultHow to Play1. Switch ON the Vehicle.2. Use the Forward / Backward joystick (Fig.3) to drive the Vehicle forward and backward.3. Use the Left / Right joystick (Fig.3) to control the Vehicle turning left or right.4. If the vehicle does not run in straight line, adjust the wheel alignment lever on the vehicle chassis (Fig. 1).5. Play on smooth surface to have the optimum performance.6. Remember to switch OFF the power of the Vehicle and Transmitter after playing.7. The optimum control range is up to 10m outdoor.8. Press the Sound Buttons for different sound effects (Fig. 5).Performance Tips1. Do not drive on grass, dirt, sand, dusts, carpet or go through water2. Do not drive in windy or rainy weather3. Avoid direct impact the Vehicle with obstacles4. Switch OFF the power when not in use to prevent damage of Vehicle and Transmitter due to leakage of electrolyte from batteries5. Remove all batteries from the Vehicle and Transmitter when not in use for long period6. Keep fingers, hair and loose clothing away from wheels7. The operating range can be affected by a variety of factors a) Low Voltage of batteries in Transmitter or Vehicle b) Interference from other items that emit radio frequency signals8. Outdoor usage is recommended in order to get optimum control range9. Recommend to play the vehicle on a clean and smooth surface10. Clean the battery compartment to make sure it is free from dust to prevent poor contact of batteriesCautions1. Do not attempt to disassemble the Vehicle or Transmitter2. Do not operate the Vehicle with same frequency with other player(s) in same location that will interfere and make the Vehicle out of control.3. Make sure the batteries are installed with correct polarities (+/-) as shown inside the battery compartment4. Remove the package and take out all accessories before giving the Vehicle and Transmitter to child to playFCC label compliance statement:This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna - Increase the separation between the equipment and receiver - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected - Consult the dealer or an experienced radio/TV technician for helpWarning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.RSS-310 Compliance Statement:This device complies with Industry Canada licence-exempt RSS-310. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Declaration of ConformityThe product is in conformity with the requirement of EU Directive 1999/5/ECEnvironmental notes:The whole product also does not belong to household waste at the end of the product life.You can return it at collection points for the recycling of electronic and electronical instrumentsThe symbol on the item, instruction manual, hangtag or packing is showing this clearly.Materials should be recycled according to their respective markings.Recycling of old devices or other re-use of materials contained therein represents an important contribution to environmental protection.Please ask at your local community for the correct collection point.Disposal of batteriesBatteries should not be disposed of in the household waste. As the consumer you are legally obliged to return batteries containing harmful substances and all other used batteries. You can hand in your old batteries at public collection points in your area or wherever batteries are sold.You will find these chemical abbreviations along with a crossed-out refuse bin on batteries containing harmful substances:Pb=Battery contains leadCd=Battery contains cadmiumHg=Battery contains mercury6 x AA For Vehicle( Not Included )3 x AA For Transmitter( Not Included )Battery Requirement1. Vehicle: 6 x 1.5V ”AA” batteries2. Transmitter: 1 x 9V batteryThe packaging and instruction manual contain important information. Please keep them for future reference.Warning! Choking Hazard. Not suitable for children under the age of 3 years due to small parts.We reserve the right to improve/amend specifications and colors without notice.Warning! The Antenna of vehicle is not to be inserted into socket outlets.Vehicle - Battery InstallationTransmitterTransmitter - Battery installationFig. 1 Fig. 3 Fig. 5 Fig. 4 Vehicle Fig. 2 For Transmitter (Fig. 3 and Fig. 4)1. Switch OFF the power2. Unscrew the screw on the battery cover3. Open the battery cover4. Install 1 new 9V battery with correct polarity (+/-) as shown inside the battery compartment5. Close the battery cover6. Tighten the screw on the battery cover7. Insert the antenna into the top of Transmitter, tighten it by rotating clockwise (viewing from top of Transmitter)Battery and Antenna InstallationFor Vehicle (Fig. 1 and Fig. 2)1. Switch OFF the power2. Unscrew the screw on the battery cover3. Open the battery cover4. Install 6 new 1.5V “AA” batteries with correct polarities (+/-) as shown inside the battery compartment5. Close the battery cover6. Tighten the screw on the battery coverKT9/11/11-00EKIDZTECH TOYS MANUFACTURING LTD. Room 1201,12/F, Inter-Continental Plaza,94 Granville Road, TST East, HK.Tel: (852) 27218868 Info@kidztech.netMade in China http://www.kidztech.net87101/87111/87121BatteryCompartmentDirection AdjustmentON/OFF SwitchSOUND BUTTONS0359

Navigation menu