Junlan Electronic TSB501M BT TOWER SPEAKER User Manual

Shenzhen Junlan Electronic Ltd BT TOWER SPEAKER

User Manual

MODEL:927032BLUTHTOOTH ENTERTAINMENT SPEAKER SYSTEMINSTRUCTION MANUALPLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE
Safety Information Overview of controls Making the connections General operation FM/AM operation USB operation Care and Maintenance TroubleshootingTechnical Specications Contents Time settingAlarm settingSnoozeSleep timerDimmerBT operationParing and connectingDuring playingCD/MP3 operationDuring playingDuring playing2Functions and ControlsUser InstructionsProgramme.procedure1435Assembling the unitAssembling the unitAssembling the unitFCC statementLimited Warranty1213Assembling the unit on wallAssembling the unit on wall67812141691010101010101010111111111111111111Important safety information435678151111
Important – Please read these instructions fully before installation Safety InformationThis symbol means that this unit is double insulated. An earth connection is not required.CAUTION : CLASS 1 LASER PRODUCTUse of contents or adjustments of performance of procedures other than those specied Herein may result in hazardous radiation exposure.LASER SAFETYThis unit employs a laser, only qualied service personnel should attempt repair.DANGER: Invisible laser radiation when open and interlock failed or defeated avoid direct exposure to beam. CAUTION: hazardous laser radiation when open and intelock defeated.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE, REFER ANY SERVICING TO QUALIFIED SERVICE PERSONNEL.• Please read this owner’s guide • Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system properly and enjoy all of its advanced features. • Please save this owner’s guide for future reference. • The product label is located on the back of the product. • This product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or on boats. • Heed all warnings - on the product and in the owner’s guide. • Do not use this apparatus near water or moisture. Do not use this product near a bathtub, washbowl, kitchen sink, and laundry tub, in a wet basement, near a swimming pool, or anywhere else that water or moisture is present. • Only use attachments/accessories specied by the manufacturer. • Unplug this apparatus during lightning storms or when unused for long periods of time - to prevent damage to this product. • Refer all servicing to qualied service personnel • Servicing is required when the apparatus has been damaged in any way: such as liquid has been spilled or objects have fallen into the apparatus; the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped - Do not attempt to service this product yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. • To prevent risk of re or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles. • Use proper power sources - Plug the product into a proper power source, as described in the operating instructions or as marked on the product. • The mains plug is used as the disconnect device, the disconnect device shall remain readily accessibleCAUTIONRISK OF ELECTRIC SHOCK!DO NOT OPEN!• Do not touch the playback side of the disc.• Do not attach paper or tape to disc. • Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the centre outwards with a soft cloth. Always keep the disc clean. • If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened soft cloth and nish with a dry cloth.• Do not use any type of solvent such as thinner, benzene, commercially available cleaners or antistatic spray for vinyl. It may damage the disc.• Do not store discs in a place subject to direct sunlight or near heat source.• Do not store discs in a place subject to moisture and dust such as a bathroom or near a humidier.• Store discs vertically in a case, stacking or placing object on discs outside or their case may cause warping.Disc handling2
31. Read these Instructions.2. Keep these Instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7.Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sourcessuch as radiators, heat registers, stoves, orother apparatus (including ampli¿ers) thatproduce heat.9. Do not defeat the safety purpose ofthe polarized or grounding - type plug. Apolarized plug has two blades with onewider than the other. A grounding typeplug has two blades and a third groundingprong. The wide blade or the third prongare provided for your safety. When theprovided plug does not ¿W into your outlet,consult an electrician for replacement ofthe obsolete outlet.10. Protect the power cord from beingwalked on or pinched particularly at plugs,convenience receptacles, and the pointwhere they exit from the apparatus.11. Only use attachments/accessoriesVSHFL¿HGE\WKHPDQXIDFWXUHr.12. Use only with a cart,stand, tripod, bracket,or table specified by themanufacturer, or sold withthe apparatus. When a cartis used, use caution when moving the cart/apparatus combination to avoid injury fromtip-over.13.Unplug this apparatus during lightningstorms or when unused for long periods oftime.14. Refer all servicing to TXDOL¿HG servicepersonnel. Servicing is required whenthe apparatus has been damaged in anyway, such as power-supply cord or plugis damaged, liquid has been spilled orobjects have fallen into the apparatus, theapparatus has been exposed to rain ormoisture, does not operate normally, or hasbeen dropped.Additional WarningsThe apparatus shall not be exposed todripping or splashing and that no objects¿lled with liquids, such as vases, shall beplaced on apparatus.Main plug is used as disconnect deviceand it should remain readily operableduring intended use. In order to disconnectthe apparatus from the main completely,the main plug should be disconnected fromthe main socket outlet completely.Battery shall not be exposed to excessiveKHDWVXFKDVVXQVKLQH¿UHRUWKHOLNH Caution marking is located at the rear orbottom of the apparatus.The marking information is located at therear or bottom of apparatus.IMPORTANT SAFETY INSTRUCTIONWARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.ATTENTIONRISQUE D' ÉLECTROCUTIONNE PAS OUVRIRCAUTIONRISK OF ELECTRIC SHOCKDO NOT OPEN The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.
ASSEMBLING THE UNITstep one---insert the pipe from the bottom of the stand and fix it with screws suppliedstep one4
ASSEMBLING THE UNITstep two---Insert the wire step twointo the steel pipe until out of the bottom of stand5
ASSEMBLING THE UNIT step four to the bottom of the stand---pull wire straight ---use rubber brackets and screws to fix the wirestep fourstep threestep three---insert the upper part of the unit into the steel pipe ---then use screw to fix two parts ---assembling is done 6
ASSEMBLING THE UNIT ON WALL Step one: drilling holes according to the size in Fig 1Step two: after drilling holes,insert the wall plug, fix the metal bracket on the wall with screw.7
ASSEMBLING THE UNIT ON WALL Step three: then fixing the bracket at the back of the unit.Step four: after fixing the bracket at the back of the unit, hang the unit on the wall.8
Accessories includedPlease familiarize yourself with the parts and accessories listed belowFunctions & Controls ● 1 x Instruction manual ● 1 x RCA cable ●1 x Remote control (with battery) Overview of controls542 316542 3114 15 16● Wall mount brackets and scews● 1 x AUX IN cable with 3.5mm stereo plaug- VOLUME + ALAR M SO UR CE S NO OZ E TIME- AM/FMTUN- TUN+TIME+ PAIRAUX IN 1 USB PLAY ER7 8 9 10 1119 20 21 1. Power standby 2. Volume down 3. Volume up 4. Alarm 5. Source display 6. Snooze 7. 8. 9. AM/FM Radio 10. Play/ pause /Pair button/Time set11. Disc eject ( [] Tune down/ previous[ ] / time - ([ ] Tune up/ next / time + [ ]EJECT9
2712293028212223242526131415161718192031323334353637383940414243444512TIME24. Dimmer 25. Sleep 26. Snooze 27. Disc eject 28. CD source Bluetooth29. AUX2 source button30.31.Radio preset recall 32. Memory 33.34. [ ] Tune up/ next Time 35.Stop 36.37.Time + button38.Volume up 39. Alarm 40.Bluetooth pairing 41.Random 42.Repeat 43.Bass up 44. Bass down 45./ time +AUX1 source Radio preset recall 12.13. Mute 14. AM/FM 15. USB source 16. Program 17.18.19.20.21. AM/FM scan 22. ST/MO ( [] Tune down/ previous[ ] Play/ pause Volume down Time - [Stereo / mono] 23. EQ Power standby 10Overview of controls542 31
User InstructionsMaking the connectionsGeneral operationTime settingAUX AUDIO CONNECTION Using a 3.5mm audio cable ( supplied), it is possible to connect an external audio device EG:- MP3 player to the unit.NOTE: This function requires the AUDIO CONNECTION to be made to an external amplier. This will NOT work connected to a TV input.1. Connect a 3.5mm cable into the AUX IN 1 input socket on the control panel.2. Connect the other end to your audio devices headphone output or Line-out.MP3 PLAYER3. Press the SOURCE4. Press PLAY on the external audio source EG:- MP3 player.NOTE: The audio output level is effected by the volume on the source EG: MP3 player so make sure that is set to about 70-80% (not too loud to avoid distortion).5. Adjust the VOLUME control on the amplier to set the main volume level. AUX IN 1button until AUX IN 1 appears on the display.Using a RCA audio cable ( supplied), it is possible to connect an external device EG:- DVD player / VCR to the unit.AUX IN 2L R DVD PlayerRedRed WhiteAudio Output Jacks on the DVD / VCR / DVRthe unit.1.Connect the AV cable to the Audio Output Jacks (White Jack=L, Red Jack=R) on DVD player and Audio Input Jacks on the rear of DVD player/VCR/DVR and etc. NOTE: 2.Press button until AUX 2 appears on the SOURCEA TV can also be connected to watch video files in the display. 3. Activate the external device. 2. Hold TIME button on the remote control to start3. Press TIME +/- button to set 12h or 24h.Then press TIME button to confirm.Alarm setting1. Place the unit into Standby mode.2. Hold button on the remote control to ALARM activate the alarm setting.3. Press and button to adjust the hourTIME+ TIME- and the minute. Then press button to confirm.ALARM1. Place the unit into Standby mode.4. Press or button to select the alarmALARMWhen the alarm rings, press Snooze Snooze Snooze Snooze Snooze Snooze Snooze Snooze button to turn Snooze Snoozeoff the ring and 9 minutes later, the alarm will ring again.Sleep timerSLEEPranges from 10-90 minutes.During playback, press button repeatedly to set the playback duration and after the time reaches, the unit will automatically turn itself off. The durationDimmerDIMMERPress button to adjust the displaybrightness.screen and the hour digit will flash. the time setting.Then "12Hr"or "24Hr" will appear on 4. PressTIME +/- to set hour and press 5. Press TIME +/- to set minute digit.Press "TIME" to confirm."TIME" to confirmand minute digit will flash.. rings as FM ("F")or buzzer("b"). Then press button to confirm.5. Press "TIME +/-" to set alarm volume level. Snooze Snooze Snooze11TIME+ TIME-
1. Press until radio FM or AM appears on the display.2. Press the button to switch between AM AM/FMand FM.3. stations. When a station is found, the unit willFM/AM operation Hold and button search for the TUNE+ TUNE-stop and start playing.4. Press button, then PX will appear on the MEMdisplay. Press or button to select the M+ M-place you want the station to be stored. Thenpress button again to store.MEM5. Press or button to listen to the presetM+ M- stations.NOTE: -The radio will automatically receive FM radio broadcasts in stereo (when available). Alternatively, is low, and background noise level is high.BT operation- Press button on the remote control to SCAN search and store the stations automatically. you can manually set the radio to mono mode by pressing ST/MO button on remote control. the signal strength1. Press button until bt appears on the displayafter a beep sound, the unit will start to search for the last conncted device if it is found. If it is2. Activate the Bluetooth connection on the externalNOTE: BT device.4. bt on the display will be solid light, Enter 0000 when asked for a passwordduring connecting.not found,the unit will search for other devices.5. Hold button on the control panel or pressPAIR PAIR button on the remote control to disconnectParing and ConnectingDuring Playing-Press and button to skip to the previous or ( next track.-Press button to pause the playback, press again to resume the playback.NOTE: buttons may not work with all(the Bluetooth sources.2. Load the disc. Then the playback will start. 3. Press button to eject the disc when finishedCD/MP3 disc operation1. Press button until CD appears on the display.3. When appears on the list, choose to pair with it."SOUNDLOGIC DES" when connection is estalished.CDDuring Playing -Press and button to skip to the previous or ( next track.-Press button to pause the playback, press again to resume the playback.-Press button to stop the playback -Press button to turn on or enter or exit the RAN random playing. -Press button to perform the repeat playback. REP-Press button to play the contents in the pre-PROG selected order. 1.During CD/MP3 playing, press STOP, then press PROG, “PRO ” will display on screen. 2.Press PREV/NEXT to select the track needed to programme, at the same time, the selected tracks display on screen, the press PROG to confirm. Note: If do not press PREV/NEXT to select track at this time, programming function willthe character disappear. automatically exit after 20 seconds, Programme procedure 3.If continuing to add tracks, repeat number 2 operation.USB operation1. Press the button until USB appears on the display.2. Insert the USB device into the USB port. Then it will start playing. During Playing -Press and button to skip to the previous or ( next track.-Press button to pause playing, press again to resume the play.-Press button to stop the play, Press again to resume.4.To complete programming, press PLAY to start playing the programmed tracks. Press STOP twice to cancel programming.2.Load the disc,it will play automatically. 3. Press button to eject disc when finished. USBAM/FM12
Care & Maintenance Important: Always unplug the appliance from the power socket during cleaning and maintenance.• Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent or wax polish for cleaning.• Clean the external surfaces with a damp soft cloth only. Never use abrasive products or solvents as it may damage the appliance.Problem Reason(s) Solution(s)No Power ● Power cable not connected to wall socket● Standby mode active● Make sure the plug is connected● Press the STANDBY button to wake the unitDisc will not play ● Disc not inserted correctly● Defective disc● Moisture on disc● Non standard disc● Lens is dirty● The unit requires resetting● Remove and re-load the disc with the label facing upwards● Try another disc● Wipe, clean and try again● Use a disc bearing the standard logo● Use a CD lens cleaner● Disconnect from the mains power for 30 seconds, and re-connect and try again.No sound ● Volume control set to minimum● Defective disc● Audio connections not correct● Increase the volume level● Try another disc● Check the Audio connections to the TV or AMP● Defective disc ● Try another discRemote not working ● Replace the battery with two new 2 x AAA batteries .TroubleshootingDisc playing error ● Battery is exhausted913
Technical SpecicationsGeneralPower sourceAudio outputBT working rangeAUX input Ø 3.5mm stereo headphone jackUSB File systemUSB max capacityFAT 16 / FAT 3232GBAC 120V~60HzFM coverage 887.5 - 108 MHz30WAM coverage 520 - 1710 KHz1432 feet
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 15
LIMITED WARRANTYThis manufacturer's product warranty extends to the original consumer purchaser of the product. Neither the retailer nor any other company involved in the sale or promotion of this product is a co-warrantor of this manufacturer warranty.WARRANTY DURATION:This product is warranted against defective meterials or workmanship. This warranty is void if the product has been damaged by accident,in shipment, unreasonable use, misuse, neglect,improper service, commercial use, repairs by unauthorized personnel or other causes not arising out of the defects in material or workmanship. This warranty does not cover the following which may be supplied with this product, including but not limited to ;LCD Screens, glass parts,lenses,etc. This warranty is effective only if the product is purchased and operated in USA, and does not extend to any unitwhich have been used in violation of written instructions furnished by manufacturer or to units have been altered or modified or, to damaged products products or parts thereof which have had the serial number removed, altered, defaced or rendered illegible. This waaranty is in lieu of all warranties expressed or implied and no representative WARRANTY DISCLAIMERS: or person is authorized to assume for manufacturer any otehr liability in connection with the sale of our products. There shall be no claims for defects or failure under any theory or tort, contractor commercial law including but not limited to, neglience, gross neglience, strict liability, breach of warranty and breach of contract.During the above 90 day warranty period, a product with a defect will be repaired orreplaced with a reconditioned comparable model (at manufacturer's option). TheWARRANTY PERFORMANCE:If service is required for this product, you should first contact Midwest Trading Group repaired or replacement product will be in warranty for the balance of the 90 daywarranty period and an additional one-month period. No change will be applicable for such repair or replacement.NOTE:Customer Service at info@mtradinggroup.com or by calling 1(866)851-4714,Manufacturer can not assume responsibility for loss or damage during incomingMonday to Friday 9am to 5pm CST.SERVICE AND REPAIR: problem you experienced, a copy of your sales receipt or other proof of purchaseshipment. As a recautionary measure, carefully package the product for shipmentand insure it with the carrier. Be sure to enclose the following details with the product:your full name, return address and daytime phone number, a note describing the to determine warranty status. C.O.D. shipments can not be accepted.16

Navigation menu