Junlan Electronic TDV31120 10 inch BLUETOOTH PDVD BUNDLE User Manual 1

Shenzhen Junlan Electronic Ltd 10 inch BLUETOOTH PDVD BUNDLE 1

User manual

PRODUCT GUIDEBC MODEL:ONA17AV04810 INCH BLUETOOTHPORTABLE BUNDLE
2CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.CAUTION:THIS DIGITAL VIDEO DISC PLAYER EMPLOYS A LASER SYSTEM.TO ENSURE PROPER USE OF THIS PRODUCT.PLEASE READ THIS OWNER`S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONT ACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.USE CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING:TO REDUCE THE RISK OF FIRE OR E L E C T R I C S H O C K , A N D A N N O Y I N G INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.SURGE PROTECTORS:It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for this product.FCC NOTICE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:● Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.● Consult the dealer or an experienced radio/TV technician for help.CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENIncrease the separation between the equi-pment and receiver.The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product`s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.DANGER:Invisible and hazardous laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.Warning:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”
3WARNINGUSE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD This unit has a long AC cord or other long cord that can easily be tripped on or pulled on, causing injury, Please make sure it is arranged so it will not drape over a tabletop, etc. Where it can be pulled on by children or tripped over accidentally.EXERCISE CAUTION AS UNIT HAS SHARP POINTS.Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit.1 ) Read these instructions.All the safety and operating instructions should be read before the product is operated.2 ) Keep these instructions.The safety and operating instructions should be retained for future reference.3 ) Heed all warnings.All warnings on the product and in the operating instructions should be adhered to.4 ) Follow all instructions.All operating and use instructions should be followed.5 ) Do not use this apparatus near water.Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.6 ) Clean only with dry cloth.Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosolcleaners. Use a dry cloth for cleaning.7)Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.8 ) Do not install near any heat sources such as radiators, heat registers, stoves, or otherapparatus(including amplifiers) that produce heat.9 ) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plughas two blades with one wider than the other. A grounding type plug has two blades and athird grounding prong. The wide blade or the third prong are provided for your safety. If theprovided plug does not fit into your outlet, consult an electrician for replacement of theobsolete outlet.10 ) Protect the power cord from being walked on or pinched particularly at plugs, conveniencereceptacles, and the point where they exit from the apparatus.11 ) Only use attachments/accessories specied by the manufacturer.12 ) Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.An appliance and cart combination should be
4moved with care.Quick stop, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.13 ) Unplug this apparatus during lightning storms or when unused for long periods of time.To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.This will prevent damage to the product due to lightning and power-line surges.14 ) Refer all servicing to qualified service personnel. Servicing is required when the apparatushas been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped.15 ) Power source.This product should be operated only from the type of power source indicated on the marking label.If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other source, refer to the operation instructions.16 ) Power linesAn outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.17 ) OverloadingDo not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.18 ) Object and liquid entryNever push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in re or electric shock. Never spill or spray any type of liquid on the product.19 ) Outdoor antenna groundingIf an outside antenna is connected to the product, be sure the antenna system is grounded so as to Provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code ANSI/NFPA 70 provides information with respect to proper to grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product, size of grounding conductors, location of antenna-discharge product, connection to grounding electrodes and requirements for the grounding electrodes.20 ) ServiceDo not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.21 ) Replacement partsWhen replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts.Unauthorized substitutions may result in re or electric shock or other hazards.22 ) Safety checkUpon completion of any service or repairs ANTENNA LEAD IN WIREANTENNA DISCHARGE UNIT ( NEC SECTION 810-20 )GROUNDING CONDUCTORS ( NEC SECTION 810-21 )POWER SERVICE GROUNDINGELECTRODE SYSTEM( NEC ART 250, PARTH )GROUND CLAMPS
5to this product, ask the service technician to perform safety checks to determine that the product is in proper operational condition.23 ) Wall or ceiling mountingThe product should be mounted to a wall or ceiling only as recommended by the manufacturer.24 ) Damage requiring serviceUnplug this product from the wall outlet and refer service to qualified service personnel under thefollowing conditions.a ) When the power-supply cord or plug is damaged.b ) If liquid has been spilled or objects have fallen into the product.c ) If the product has been exposed to rain or water.d ) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an adjustment of other controls may result in damage and will and require extensive work by a qualified technician to restore in the product to its normal operation.e ) If the product has been dropped or the cabinet has been damaged.in performance-this indicates a need for service.25 ) Note to CATV system installerThis reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.NOTE: Refer all servicing to qualied service personnel Servicing is required when the unit has been damaged in any way such as the has been damaged, liquid has been spilled into unit, the unit has been exposed to rain or moisture, the unit has been dropped or the unit does not operate normally.NOTES ON HANDLING:● When shipping the unit, always use the original shipping carton and packing materials.For maximum protection, repack the unit as it was originally packed at the factory.● Do not use volatile liquids, such as insect spray,near the unit. Do not leave rubber or plastic products in contact with the unit for a long time. They will leave marks on the nish.● The top and rear panels of the unitmay become warm after a long period of use.This is normal and not a malfunction.● When the DVD player is not in use, be sureto remove the disc and turn off the power.NOTES ON LOCATING THE DVD PLAYER:When you place this unit near a TV, radio or VCR, the playback picture may become poor and the sound may be distorted. In this case, move the unit away from the TV, radio or VCR.NOTES ON CLEANING:Use a soft, dry cloth for cleaning● For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage the surface of the unit.● If you use a chemical-saturated cloth to clean the unit, follow that product's instructions.Warning: Cleaning and adjustment of lenses and /or other components of playback mechanism should be performed by a qualied service technician.NOTES ON MOISTURE CONDENSATION:Moisture condensation damages the DVD player.Please read the following carefully.● Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside f ) When the product exhibits a distinct changefollowing: the power-supply cord or plug
6of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the DVD player.Moisture condensation occurs during the following cases:● When you bring the DVD player directly from a cold place to a warm place.● When you use the DVD player in a room where you just turned on the heater, or a place where the cold wind from the air conditioner directly hits the unit.● ln summer, when you use the DVD player in a hot and humid place just after you moved the unit from an air conditioned room.● When you use the DVD player in a humid place.Do not use the DVD player when moisture condensation may occur.● lf you use the DVD player in such a situation, it may damage discs and internal parts. Remove the disc, connect the AC/DC Adaptor to the DVD player and the wall outlet, turn on the DVD player and leave it ON for two or three hours. After two or three hours, the DVD player will have warmed up and evaporated any moisture.
7 The region number for this DVD Player is: 1 See the following page for information regarding region numbers.PLAYABLE DISCS:The following discs can be played back on this DVD player:DISC TYPES:DVDData on most DVDs is divided into sections called titlesand then into subsections called chapters, each of whichis given a title or chapter number. Some features of thisDVD player will not operate with some DVD discs as theyare preset. If a function you selected does not run asdesired , refer to the manual accompanying the DVD disc.AUDIO CDData on an audio CD is divided into sections called tracks ,each of which is given a track number.IMPORTANT:It is important that you read the manual that accompanies the DVD disc , as there are features that are on the DVD player that cannot be used with certain DVDs .There are also extra features on the DVD disc that are different for each DVD disc, so they are not explained in this owner's manual.This player conforms to the NTSC and PAL color systems . However , if you are in the USA , Canada or Mexico,leave this setting on NTSC . If incorrectly set to PAL ,the TV picture may roll vertically. In this case , set the TV system to NTSC.Notes on Copyright:It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public and rent copyrighted material without permission. DVD video discs are copy protected, and any recordings made from these discs will be distorted. This product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by MacrovisionMacrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.Region Management Information:This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD player, this DVD player cannot play that disc. You may not be able to play back some DVD video discs on this player if they were purchased from outside your geographic area or made for business purposes. When you try to play back an unauthorized disc, Wrong Region appears on the TV screen.1ABOUT DISCS
8STOPBT PAIRSOURCEDVD/USB/CARD123456789101112131. SETUP Button: Press to enter SETUP system, press again to exit.2. BT PAIR Button: Press to disconnect the connection with headphone.3. (Previous/Cursor Up) (Next/Cursor Down) (Fast backward/Cursor Left) (Fast forward/Cursor Right) OK Button: Press to confirm the operation.4. MENU Button: Press to enter root menu playing(it depens on the disc recording).5. SOURCE Button: Press to enter AV IN mode, press again to resume normal mode.6. STOP Button: Press once to pre-stop, press again to fully stop.7. PLAY/PAUSE Button: Press to start playing or pause.8. VOL+ Button: Press to increase volume.9. VOL- Button: Press to decrease volume.10. DVD/USB/CARD Button: Press to display the sources(DVD, CARD, USB), using the direction 11. AUDIO Button: Press repeatedly to switch the audio mode.12. MUTE Button: Press to turn off the sound, press again to resume.13. OPEN Button: Press to open the disc cover.button to select the desired source, and press OK button to confirm.LOCATION OF CONTROLS
9Right Side View:Front Side View:14 15 16 17 18 19 2021222314. USB Port15. SD/MMC CARD Slot16. Headphone Jack17. AV OUT Jack18. AV IN Jack19. Power ON/OFF Switch20. DC IN Jack21. Charge Indicator 22. Remote Sensor 23. Bluetooth/Power IndicatorLOCATION OF CONTROLS
101234567891011 12131415SOURCE161718192021222324252627281. SOURCE Button2. VOLUME +/– Buttons4. MENU ButtonŻŻ7. ǿŻŻ6. Button12. 15. SLOW ButtonButton16. LCD ON/OFF Button17. Numeric Buttons18. SETUP Button19. ButtonǿŻŻ20. ButtonŻŻ21. OSD (On Screen Display Button22. SUBTITLE Button23. ANGLE Button24. PROG (Program Button26. STEP Button27. ZOOM Button28. A-B Repeat Button9. TITLE Button8. USB/CARD Button10. AUDIO ButtonREPEAT Button13. 11. ( 14. GOTO Button OK25. Button3. MUTE Button5. Direction Buttons ( Play/Pause Button6723 %XWWRQŶMENUTITLEOKREMOTE CONTROL
11BATTERY INSTALLATION (REMOTE CONTROL)Remote Control SensorRemarks:1. When there is an obstacle between the unit and the transmitter, the transmitter may not operate.2. When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the remote control of the unit, the remote operation may be unstable. POWERBattery installation:1. Press the tab on the battery door and lift it off.2. Install two (2) x AAA size batteries (not included) into the batterycompartment as the figure on right and the polaritymarkings inside battery compartment.3. Replace the battery door.Battery Precautions:Follow these precautions when using a battery in this device:1. Use only the size and type of battery specified.2. Besure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device.batteries to prevent damage or injury from possible battery leakage.manufacturer's directions).6. Do not dispose of battery in fire. Battery may explode or leak.7. Clean the battery contacts and also those of the device prior to battery installation.3. Do not mix different types of batteries together (e.g. Alkazline and Carbon-zinc) or old batteries with fresh ones.4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the 5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture.(Follow battery
12The unit has a built-in DC 7.4V Lithium-ion rechargeable battery. Connect the small plug from the supplied AC/DC Adaptor to the DC IN Jack on the right of unit. Connect the AC/DC Adaptor to the wall outlet having During charging, the 1%7KH$&'&$GDSWRULVLQWHQGHGWREHFRUUHFWO\RULHQWDWHGLQD Your battery will last longer if you follow these simple guidelines for caring for and storing it. Recharge and store the device within the temperature range of 5°C~35°C (40°F~95°F). Do not overcharge (longer than 24 hours). Excessive charging or Battery life naturally shortens slowly over time.  2. This is a special negative grounded Car Adapter. Using this Car Adapter with a plus grounded car can cause malfunction. 3. Do NOT plug in the Car Adapter until the car ignition is turned on. 4. Disconnect the Car Adapter from the cigarette lighter and the unit after use.To DC IN Jack on the unit as follows:Charging Indicator will light up red. When finished, it will turn green. discharging may shorten the battery’s life. 1. Connect to the cigarette lighter socket of a vehicle that has a 12V battery as the figure below. AC 100-240V~; 50/60Hz.POWER SOURCERecharge it YHUWLFDORUÀRRUPRXQWSRVLWLRQTo the cigarette lighter socketNOTES:Charging by the car adaptor:Charging by the AC/DC adaptor:1.2.3.A.B.C.It is NOT compatible w ith a vehicle that has a 24V battery.
13 Audio/Video cable Connected to the TV Connected to the Video PlayerAUDIO OUTLR120V ~ 60HzVIDEO OUTVIDEOVideo PlayerDIGI TALVideo input jack ( Yellow )Audio left channel input jack ( White )Audio right channel input jack ( Red )NOTE:CONNECTIONSConnecting to a TV or Video Player such like DVD; VCR; DVR Players ... (AV connection cable not included)The default setting of the unit is AV Out, if connect to external Videoto turn back to AV Out mode. Player (such like DVD; VCR; DVR Players ... ), press the SOURCE Button to set to AV IN mode ("AV IN" will appear on the screen). Press again The unit itself may not display when connecting through AV OUT jack.Using the supplied Headphone to listen privately.-Switch on the unit, the Bluetooth Indicator will blink.-Switch on the Headphone, it will connect with the unit automatically after a few seconds.-The Bluetooth Indicator will stay lit when pairing is successful.The unit itself may not display when connecting through AV OUT jack.Using the supplied Headphone to listen privately.Using the supplied Headphone to listen privately.
14adcb180°The viewing angle of the swivel panel can be adjusted as follows:SWIVEL PANEL
153. During playback: ~ Press the or Buttons repeatedly to fast search for a specific section forward/backward. Press Button to resume normal playback. ~ Press the or Buttons repeatedly to skip to specific track. ~ Press Button to pause, press Button again to resume normal playback. Repeat Playback: Press the REPEAT button twice to Repeat Title, then the current Title will playback repeatedly. Press the REPEAT button the third time to Repeat All then all files will playback repeatedly.~ Press the VOL (Volume) +/- Buttons to adjust volume level.(CD)Repeat Playback: During playback, press the REPEAT Button once to Repeat Track, then the current track will playback repeatedly. the Power ON/OFF switch to "ON" position to power on the unit.2. Press the OPEN button to open the disc cover. Place the disc on the center spindle with the label side facing up.Close the disc door and the player will start playback automatically. 1. Lift up the panel and turn to desired angle. Slide ~ Press the STOP Button to stop playback. The player will remember the point where disc was stopped.Press the STOP Button again to fully stop, press the Button to start playback from beginning. Press the REPEAT button repeated until the repeat mode cancelled to turn off repeat mode. During playback, press the REPEAT button once to Repeat Chapter, then the current chapter will playback repeatedly. OPERATIONS(DVD)352*press the 1. During CD or DVD playback, ( Program )4. Using the Direction Button to select and highlight the "PLAY" or Button on the screen then press the OK Button to start program playback. (CD/DVD)Program:2. Using the Direction and Numeric Buttons to select and set the desired TT (Title), CH (Chapters), tracks (for CD) of the movie /music you wants. The Program menu will appear as follows. button. DVD CDWhen press the Button again, playback will start from this point. Press the REPEAT button twice to Repeat All then all files will playback repeatedly. Press the REPEAT button repeated until the repeat mode cancelled to turn off repeat mode. T C12345678910111213141516T C T C T C01:03--:----:----:----:----:----:----:----:----:----:----:----:----:----:----:--PLAY CLEARTRACK01TRACK02TRACK03TRACK04TRACK05TRACK062/16TRACK03TRACK04 there is wrong programming. clear all the programmed items when3. Using the Direction Button to select and highlight the "CLEAR" or Button on the screen then press the OK Button to
16SOURCE VOL/Volume +/– Press to increase or decrease volume. MUTE Press to turn to "AV IN" mode. Press again to resume. LCD ON/OFF Press to turn on or off the LCD display. SUBTITLE Press to turn off the sound, press again to resume. During DVD playback, press repeatedly to select the desired subtitle (Function depends on the recording of disc).OPERATIONSTITLE depends on the recording of the disc).Press to return to disc's title page (FunctionMENU depends on the recording of the disc).Press to return to disc's menu page (FunctionOSD (On Screen Display)During playback, press the OSD button repeatedly to read the information of playback status.STEP During movie playback, press STEP Button repeatedly to play the movie frame by frame.Press the Play/Pause Button to resume normal playback.SLOW A-B Repeat During Playback, press the A-B Button to define where you want the section to start. Press the A-B Button again to define where you would like the section to end, the unit will then plays the selected section repeatedly and continuously. Press the A-B Button again to resume normal playback.(This function is not available on all discs). During playback, press the SLOW Button repeatedly to set the slow motion speed. Press Play/Pause Button to resume normal playback.GOTO AUDIO During DVD playback, press repeatedly to select theaudio mode. (Function depends on the recording of disc). Press the GOTO Button, set the desired Title and Chapter and Time, press the OK button to confirm. ANGLE (Function depends on the recording of During DVD playback, press repeatedly to select the viewing angle disc).ZOOM During movies playback, press the ZOOM Button repeatedly to zoom in/out the picture.
17 1. Insert the USB Device or SD/MMC memory card into the USB port /card slot as the gure below. NB: The unit supported to playback:~ MP3; WMA (Music le)~ JPG (Pictures) Make sure correct les were saved in the USB device or memory cards. USB or CARD PLAYBACK3. During playback:~ Press the or Button repeatedly to skip tracks.~ Press the Button to pause. Press again to resume.ǿŻŻǿŻŻ2. Switch on the unit, press the USB/CARD Button on remote control or press the DVD/USB/CARDButton on the unit, the "DVD, CARD, USB" selection window will pop up on the screen. Using the Direction Buttons to select and highlight the desired source then press the OK Button to confirm to start playback.
18◄,►,▲,▼need to set or reset. Press the OKButton to enter or confirm the selection. After setting, press the SETUP Button to save the settings and exit.Press the SETUP Button, the setting menu will appear on the screen as below. During setting, using the Direction Buttons to select and highlight the function you 4. If TV type is selected, set the aspect ratio to match the connected TV. SETUPTv SystemPOWER RESUMEScreen SaverTV TypePasswordRatingDefaultSYSTEM SETUP1. If Tv System is selected, it can only be set to NTSC, PAL or AUTO to match the connected TV.2. If POWER RESUME is selected, if set it On,the unit will start playback from the position where the disc was stopped last time. 3. If Screen Saver is selected, if set to On, the screen saver will come on when the unit idles or the image is paused for several minutes.5. If Password is selected, input the default password "0000" to unlock the rating.SY ST E M SE T U P:(R):Under17yearsold,ParentalGuidancestrongly(PG): Parental Guidance(PG13): Parental Guidance less than 13 years old(PG-R): Under 17 years old, Parental Guidance suggested(NC-17): 17 years old or above6. If Rating is selected, the rating level will appear as below, set to the desired level as need.(ADULT): Adult only(KID SAFE): Kid Safe(G): All ages7. If Default is selected and set it to restore, all settings will be restored to factory setting.LANGUAGE SETUPOsd LanguageAudio LangSubtitle LangMenu Lang SE T U P:L AN GU AGESelect Osd language(on screen display), Audio Lang, Subtitle Lang or Menu Lang separately to set to disired language.
19SYSTEM SETUPAUDIO SETUPKeySE T U P:AU DIOSelect the audio setup to set the audio key level.VIDEO SETUPBrightnessContrastHueSaturationSE T U P:Select the video setup to set the panel quality such as brightness, contrast, hue and saturation.DIGITAL SETUPDual MonoDIGIT ALIn digital setup menu, you can set to Stereo, Mono L, Mono R or Mix Mono.#+4+20-2-4bStereoMono LMono RMix Mono
20Treat the disc carefully. Handle the disc only by its edges.Never allow your ngers to contact with the shiny, unprinted side of the disc.● Do not attach adhesive tape, stickers, etc. to the disc label.● Clean the disc periodically with a soft, lint-free,dry cloth, Never use detergents or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.● If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged(scratched).● When cleaning the disc, wipe in straight lines from the center of the disc to the outer edge of the disc. Never wipe in circular motions.● Discs should be stored in their cases after each use to avoid damage.● Do not expose discs to direct sunlight, high temperatures or dust, etc. Prolonged exposure or extreme temperatures can warp the disc.● Do not stick or write anything on either side of the disc. Sharp writing Instruments, or the ink, may damage the surface.Cleaning the Unit● To prevent re or shock hazard, disconnect your unit from the AC power source when cleaning.● The nish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts.● Mild soap and a damp cloth may be used on the front panel.CARE AND MAINTENANCECaring for Discs
21ACCESSORIESSPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICEPower Source: Disc Compatibility: 1 x User's Manual1 x Remote Control1 x Headphone SPECIFICATIONS1 x AC/DC Adaptor1 x Car Adaptor DVD/VCD/CD/CD-R/CD-RW/DVD±R/DVD±RWPower Source: Built-in DC 7.4V Lithium-ion rechargeable battery, recharge by DC 12V, 1000mA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
LIMITED PRODUCT WARRANTYThis quality product is warranted to be free from manufacturer’s defects in material and workman-ship,provided that the unit is used under the normal operating conditions intended by the manufacturer.Should you have any problem with this product, please and it is highly recommended to visit our website atwww.curtisint.com before you take any other steps as we have additional copies of instruction manuals,operating manuals and trouble shooting tips on our website which gives you the answer on most of thequestions you could have in operating the unit.TERMS OF WARRANTYC.I. Service Dept. warrants this product to be free from defects in materials and workmanship for 90 days onparts and 90 days on labor. If you originally purchased your product more than 90 days ago, a repair feemay apply.Nothing within this warranty shall imply that C.I. will be responsible or liable for any damage to any itemsplaced in this product, whether due to any defect of the product, or its use, whether proper or improper.EXCLUSIONSSave as herein provided, C.I. Service Dept. (Canada) or C.I. Service Dept. (USA), there are no otherwarranties, conditions, representations or guarantees, express or implied, made or intended by C.I. or itsauthorized distributors and all other warranties, conditions, representations or guarantees, including anywarranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation orstatue is hereby expressly excluded. Save as herein provided, C.I. Service Dept. (Canada) or C.I. ServiceDept. (USA), shall not be responsible for any damages to persons or property, including the unit itself,howsoever caused or any consequential damages arising from the malfunction of the unit and by thepurchase of the unit, the purchaser does hereby agree to indemnify and save harmless C.I. from any claimfor damages to persons or property caused by the unit.TO OBTAIN REPAIRS UNDER THE TERMS OF THIS WARRANTY1. The original purchaser must present a copy of the original bill of sale and the service warranty card.2. Any alterations, abuse, misuse, battery corrosion or accidental damage voids the warranty.3. The warranty does not cover cabinets and accessories.4. No warranty or insurance contained or set out shall apply when damage or repair is caused by powerfailure; damage in transit or when moving the unit; improper power supply; use for commercial orindustrial purposes; service calls resulting in customer education, etc.5. The defective product should be mailed to:Canada U.S.AC.I. Service Dept. Curtis International Ltd315 Attwell DriveToronto, ONM9W 5C1c/o Lotus International Company6880CommerceBlvd.Canton MI 48187U.S.A.For service assistance and product information, please call: 1-800-968-9853.If mailing the product, the freight must be prepaid and a money order for $7.00 should be includedto cover the cost of insurance and the return of the product.6. C.I. reserves the right to repair or replace the parts which have become defective.Model No. Date Purchased Serial No.

Navigation menu