Junlan Electronic NAS3070 COUNTERTOP BLUETOOTH SPEAKER User Manual

Shenzhen Junlan Electronic Ltd COUNTERTOP BLUETOOTH SPEAKER

User manual

Portable Stereo System with Bluetooth®NAS-3070Instruction ManualPlease read carefully before use and keep for future reference.
Page 2 Naxa ElectronicsThank YouWe know you have many choices when it comes to technology; thank you for choosing us here at Naxa Electronics. Established in 2001 in Los Angeles, Califor-nia, we are dedicated to delivering products that en-tertain and delight.We trust that you will be happy with your purchase. Please read this manual carefully and save it for refer-ence. You may also nd the latest FAQ, documentation, and other product material at our website. Come visit us on the web at www.naxa.com and see all that we have to offer!In the BoxPlease take a moment to make sure that you have ev-erything in the list below. Although we make every ef-fort to ensure that each Naxa device is securely packed and sealed, we know a lot can happen in between us and you. If anything is missing, check back with your local retailer to get immediate assistance. If they can-not help you, please contact our Naxa Support team at www.naxa.com/naxa_support. •NAS-3070 •USB charging cable
www.naxa.com Page 3At a Glance1 23 41 Pause or resume playback.2 PAIR Place the speaker in pairing mode to connect to a Bluetooth® enabled device.3 – Volume down. Press to decrease the volume level.4 + Volume up. Press to increase the volume level.5 POWER Set the switch to the left “ON” position to turn the speaker on. Set the switch to the right “OFF” position to turn the speaker off. 6 USB charge portConnect to a USB power source with the included cable.7 AUX connectorAUX mode. 3.5mm stereo connection for devices with 3.5mm line-out or head-phone output.
Page 4 Naxa ElectronicsConnecting PowerYour speaker has an integrated rechargeable battery. Upon initial use, the battery should be charged fully to ensure optimal performance and battery life.Use the included USB cable to connect the speaker to a USB power source to charge the battery. •Connect the small end of the cable to the USB charge port [6] of the unit. •Connect the large end of the cable to a high-power USB port of a computer. The computer should be powered on.⚠⚠The battery used in this device may pres-ent a re or chemical burn if mistreated. Do not disassemble, incinerate, or heat the battery. Do not leave the battery in a place subject to direct sunlight, or in a car with its windows closed.Do not connect the unit to a power source other than that which is indicated here or on the label as this may result in the risk of re or electric shock. The power indicator will light a steady red when the battery is charging. When charging is complete, the power indicator will darken.The power indicator will ash red when the battery level is low. ⚠L It takes approximately 2 hours to charge the unit fully when connected to a stan-dard USB port.The battery will charge even if the speaker is switched off.
www.naxa.com Page 5Pairing a Device with Bluetooth® A device must be paired with the speaker before using them together for the rst time. To place the speaker in Pairing mode, press the PAIR button. The status indicator will ash blue quickly. Then:1. Make sure Bluetooth is enabled on your device. En-able it if it hasn’t.2. Use your device to search for nearby Bluetooth connections. (This function is usually in the Blue-tooth settings menu; refer to your device’s instruc-tion manual to learn more.)3. The speaker will announce itself as “NAS-3070.” Select it from the list of devices.4. If your device asks for a passcode, use “0000” to complete the pairing process.When the speaker is paired and connected to a device, the status indicator will light a steady blue.Using the AUX Input ConnectorConnect devices without Bluetooth® by using the AUX connection. A 3.5mm stereo patch cable is required to make this connection.1. Use a 3.5mm stereo patch cable to connect the de-vice’s headphone or line-out jack to the AUX con-nector [7] found on the back of the speaker.2. Turn on the device and the speaker. Lower the vol-ume on both.3. Set the device volume to 80% of its maximum and then start playback.4. Press the + button [4] to increase the volume grad-ually to a comfortable level.⚠L The active speaker source will switch to AUX when a device is connected to the AUX connector [7]. Audio output from Bluetooth will be disabled while the AUX connector is being used.
Page 6 Naxa ElectronicsWarnings and PrecautionsThe lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of unin-sulated “dangerous voltage” within the product’s enclosure that may be of signicant magnitude to constitute risk of electric shockThe exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and ser-vicing instructions in the literature accompanying the appliance.CAUTION• Do not block the ventilation openings or holes.• Do not place any naked ames (such as lighted candles) on the ap-paratus.• When discarding batteries, follow all local rules and laws governing the disposal of batteries. Consider the environmental impact of your actions!• To prevent re or shock hazard, do not expose this appliance to rain or moisture.Important Safety Information1. Read Instructions: All the safety and operating instructions should be read before the product is operated.2. Retain Instructions: The safety and operating instruction should be retained for future reference.3. Heed Warnings: All warnings on the product and in the operating in-structions should be adhered to.4. Follow Instructions: All operating and usage instructions should be followed.5. Cleaning: Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.6. Attachments: Use only attachments recommended by the manufac-turer. Use of other attachments may be hazardous.7. Water and Moisture: Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, laundry tub, in wet basements, or near a swimming pool and the like).8. Accessories: Do not place this product on an unstable cart, stand, tri-pod, bracket, or table. Use only with carts, stands, tripods, brackets, or tables recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer’s in-structions and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.9. Ventilation: Slots and openings in the cabinet are provided for ven-tilation to ensure reliable operation of the product and to protect it
www.naxa.com Page 7from overheating. These openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer in-structions have been adhered to.10. Power Sources: This product should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power or other sources, refer to the operating instructions.11. Grounding or Polarization: This product may be equipped with a po-larized alternating-current line plug that has one blade wider than the other. This plug will only t into the power outlet in one direction. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the direction of the plug. If the plug should still fail to t, contact an electrician to replace the obsolete outlet. Do not defeat the safety purpose of the polarized plug.12. Power-Cord Protection: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, con-venience receptacles, and at the point which they exit from the product.13. Protective Attachment Plug: The product may be equipped with an attachment plug with overload protection. This is a safety feature. See the operat-ing instructions for replacement or directions to re-set the protective device. If replacement of the plug is required, be sure the service technician has used a replace-ment plug that has the same overload protection as the original plug as specied by the manufacturer.14. Outdoor Antenna Grounding: If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70 provides in-formation with regard to proper grounding of the mast and support-ing structure,grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode (see gure).15. Lightning: For added protection for this product, unplug it from the wall outlet and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long pe-riods of time. This will prevent damage to the product due to lightning or power-line surges.16. Power Lines: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power cir-cuits, or where it can fall into such power lines or circuits. When in-
Page 8 Naxa Electronicsstalling an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.17. Overloading: Do not overload wall outlets, extension cords, or inte-gral convenience receptacles as this can result in a risk of re or elec-tric shock.18. Object and Liquid Entry: Never push objects of any kind into this prod-uct through openings as they may touch dangerous voltage points or short-out parts that could result in a re or electric shock. Never spill liquid of any kind on the product.19. Servicing: Do not attempt to service this product yourself as open-ing or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualied service personnel.20. Damage Requiring Service: Unplug this product from the wall outlet and refer servicing to qualied service personnel under the follow-ing conditions: a) when the power-supply or plug is damaged; b) if liquid has been spilled or if objects have fallen into the product; c) if the product has been exposed to rain or water; d) if the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualied technician to restore the product to its normal operation; e) if the product has been dropped or damaged in any way; f) when the product exhibits a distinct change in performance—this indicates a need for service.21. Replacement Parts: When replacement parts are required, be sure that your service technician has used replacement parts specied by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in re, electric shock, or other hazards.22. Safety Check: Upon completion of any service or repairs to this product,ask the service technician to perform safety checks to ensure that the product is in proper operating condition.23. Wall or Ceiling Mounting: The product should be mounted to a wall or ceiling only as recommended by the manufacturer.24. Heat: The product should be situated away from heat sources such as radiators,heat registers, stoves, or other products (including ampli-ers) that produce heat.WARNING:This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. FCC NOTICEThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the lim-its for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in-terference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to ra-dio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be de-termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
www.naxa.com Page 9• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.CAUTION ON MODIFICATIONSChanges or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.Trademark & Regulatory StatementsBluetooth® is a registered trademark of Bluetooth SIG, Inc. Other trade-marks and names are those of their respective owners.
Page 10 Naxa ElectronicsTroubleshooting GuideThis guide lists common problems and their solutions. Please refer to this guide before requesting service. If you need further assistance, please contact Naxa Technical Support (www.naxa.com/naxa_support/).Symptom Possible Cause Possible SolutionThere is no power.The battery is exhausted.Connect the unit to a USB power source to charge it.The Power switch is set to OFF.Make sure that the Power switch found on the back of the unit is set to the ON position.The device is unable to connect to the speaker.The speaker is not in pairing mode.Reset the speaker (turn it off and then on again.) Press PAIR until the status indicator is ashing quickly blue.Bluetooth may be disabled on your device.Make sure Bluetooth is enabled on your device. Turn it on if it isn’t. Symptom Possible Cause Possible SolutionThe device is connected but there is no sound.The AUX connector may be in use.Disconnect all cables from the AUX input connector [7] on the back of the speaker.Your device may be beyond the effec-tive range of the speaker.Move closer to the speaker. Range may be affected adversely by environmental conditions.Your device may not be in playback mode.Ensure that your device is operating correctly. Start playback on your device.
www.naxa.com Page 11SpecicationsSpeakers Twin 2" drivers Frequency Response20–20,000 HzInput Wireless Bluetooth® technology3.5 mm AUX audioPower Rechargeable lithium-ion battery (1,000 mAh)USB charge port (DC 5V, 0.5A)Battery Life* ~5 hours* Estimate based on playback at 50% volume. Battery life will vary de-pending on usage.Note: Product are improved continuously. We reserve the right to modify the product and specications without prior notice.SupportIf you have problems with your device, please consult the instructions in this manual. Please also visit us on the web at www.naxa.com to get up to the minute news, alerts, and documentation for your device. For additional assistance, please contact Naxa Technical Support.NAXA Technical Support 2320 East 49th St. Vernon, CA 90058 http://www.naxa.com/naxa_support/

Navigation menu