Junlan Electronic ITB123B BLUETOOTH TOWER SPEAKER User Manual

Shenzhen Junlan Electronic Ltd BLUETOOTH TOWER SPEAKER

User Manual

2CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.CAUTION: Use of any controls or adjustments or performance of procedures other than those herein specied may result in hazardous radiation exposure.WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive nish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.WARNING: Use of this unit near uorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any uorescent lighting, as it may be the cause.CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.PRÉCAUTION: Danger d’explosion si les piles sont remplacées de façon incorrect. Remplacer les piles seulement par le même type de pile ou l’équivalent.WARNING: The battery, batteries, and battery pack shall not be exposed to excessive heat such as sunshine, re, or the like.WARNING: Lithium batteries, like all rechargeable batteries are recyclable and should be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. They should never be incinerated since they might explode.WARNING: Shock hazard - Do Not Open.AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIRMains Plug or Direct plug-in adapter is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the Mains Plug or Direct plug-in adapter should be disconnected from the mains socket outlet completely.La che d’alimentation ou adaptateur de courant est utilisé comme dispositif de déconnexion et doit rester accessible pendant l’utilisation. Pour mettre l’appareil hors tension, la che ou adaptateur de courant doit être débranché de la prise de courant.The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.ATTENTIONRISQUE D' ÉLECTROCUTIONNE PAS OUVRIRCAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENThe exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.Warnings and PrecautionsITB123B-811-01-IB.indd 2 4/17/2013 1:48:18 PM
Customer Support: 1-888-999-4215313. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.1. Read these Instructions.2. Keep these Instructions.3. Heed all Warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specied by the manufacturer.12. This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.Important Safety InstructionsSpecial note: When placing your unit on a lacquered or natural nish, protect your furniture with a cloth or other protective material.WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.The apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed on apparatus.L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet.Battery shall not be exposed to excessive heat such as sunshine, re or the like.Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à la lumière du soleil, au feu ou autres choses de semblable.Caution marking is located at the rear or bottom of the apparatus.Attention marquage est situé sur le paneau arrière ou inférieur de l’unité.The marking information is located at the rear or bottom of apparatus.Le marquage est situé sur le paneau arrière ou inférieur de l’unité.FCC WarningsAdditional WarningsITB123B-811-01-IB.indd 3 4/17/2013 1:48:18 PM
4ITB123B• Supports Enhanced Data Rate (EDR)• Supports prole A2DP (Advanced Audio Distribution Prole)• Negative LCD display• Built-in FM wire antenna• Station memory presets (20 FM)• Bass controls• Treble controls• Supports Bluetooth v3.0• Digital volume control• Digital FM radio (PLL)• Remote• 3.5mm audio input• LED pairing indicator• Wireless range: 33 feet• Built-in stereo speakers• AC power: built in AC power cord.• Remote control: requires a CR2025 battery (pre-installed)• RCA stereo audio cable• Wooden stand and mounting screwsFeatures IncludesSetupAC power: built in AC power cord. Requires a CR2025 battery (pre-installed)AC 120V~ 60HzAUX INFM ANT.LINE INLRLITHIUM BATTERYCR 20253VPUSHOPENLITHIUM BATTERYCR 20253VCR2025PUSHOPENPower RemoteITB123B-811-01-IB.indd 4 4/17/2013 1:48:19 PM
Customer Support: 1-888-999-42155Table of ContentsWarnings and Precautions ............................................................................ 2Important Safety Instructions ......................................................................... 3ITB123B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4FeaturesSetup ................................................................................................ 4PowerRemoteIncludesTable of Contents ..................................................................................... 5Introduction ......................................................................................... 6Audio Inputs & Subwoofer Output .................................................................... 8Using the Stereo RCA InputsUsing the Line InRadio and Line In ..................................................................................... 9Tuning the FM RadioSaving Stations as PresetsBluetooth ...........................................................................................10Pairing a Bluetooth Device for the First TimePlaying Audio WirelesslyStand ...............................................................................................11Company Information ...............................................................................12International SupportContact InformationWarrantyGreen InitiativeITB123B-811-01-IB.indd 5 4/17/2013 1:48:19 PM
6IntroductionAC 120V~ 60HzAUX INFM ANT.LINE INLRPMMUTESTEREOMONOPROGRAMStereo RCA Audio InputsLine InputClk Set/Play/PauseIn o mode, press to begin setting the clock. Press to play or pause a connected Bluetooth device.VolumeTurn to adjust the volume.Pairing IndicatorPair/MemoryIn Bluetooth mode, press to begin pairing a Bluetooth device. In FM Radio mode, press to browse preset stations.PowerPress to turn the unit on or o.SourcePress to switch between Bluetooth, Line In, AUX, and FM Radio modes.Skip/SearchTune (+/-)Press to skip between tracks .Press and hold to search through an individual track. Press to tune the FM radio. Press and hold to search for the next available station.ITB123B-811-01-IB.indd 6 4/17/2013 1:48:20 PM
Customer Support: 1-888-999-42157SourcePress to switch between Bluetooth, Line In, AUX, and FM Radio modes.MutePress to mute the volume.MonoPress to switch to Mono stereo.FM ScanPress to scan for available radio stations in FM Radio mode.DisplayPress to display the clock.TreblePress to adjust the treble. Clock SetPress to set the clock.PowerPress to turn the unit on or o.Play/PausePress to play or pause a track.Skip/SearchTune (+/-)Press to skip between tracks .Press to tune the FM radio. Press and hold to search for the next available station.MemoryIn FM Radio mode, press to browse preset stations.EQPress to set the EQ.VolumePress to adjust the volume. BassPress to adjust the bass.ITB123B-811-01-IB.indd 7 4/17/2013 1:48:20 PM
8Setting the Clock & Stereo RCA InputsWhen connecting two products using an RCA Cable, match the colored ports with the same colored connection.1. Connect the RCA Cable to the RCA Stereo Inputs located on the back of the unit, and to the audio outputs on the television.2. Press the Power button to power on the unit.3. Press the Source button repeatedly to enter Aux Mode.4. Audio played through the television will now be heard through the speakers.1. If powered on, press the Power button to turn the unit o.2. Press the Clock Set button.The hour will begin to ash.3. Press the Tuning+/- buttons to adjust the hour.4. Press the Clock Set button.The minute will begin to ash.5. Press the Tuning+/- buttons to adjust the minute.6. Press the Clock Set button again to nish setting the time.Using the Stereo RCA InputsSetting the ClockITB123B-811-01-IB.indd 8 4/17/2013 1:48:20 PM
Customer Support: 1-888-999-42159Radio and Line In3.5 mm line input cable not included.1. Plug one end of a 3.5 mm audio input cable into the Line In on the unit. 2. Plug the other end of the cable into the audio output/headphone output on an MP3 Player or other audio source.3. Press the Power button to power the unit on.4. Press the Source button repeatedly to enter Line In Mode.5. Audio played through the connected device will now be heard through the speakers.Using the Line In1. Press the Source button repeatedly to enter FM Radio Mode.2. Press the FM Scan button on the remote.3. The bar speaker will scan for all available stations, and store them.4. Press the Memory button on the remote or the unit to browse through stored stations.Saving Stations as Presets1. Press the Power button to turn the unit on.2. Press the Source button repeatedly to switch the unit to FM Mode.3. Press the Tuning+/- buttons on the unit or the remote to scan for the next available station.4. Press and hold the Tuning+/- buttons to search for the next available station. Tuning the FM RadioITB123B-811-01-IB.indd 9 4/17/2013 1:48:20 PM
10BluetoothPlaying Audio WirelesslyPairing a Bluetooth Device for the First Time1. Follow the instructions for Pairing a Bluetooth Device.2. Press the Source button repeatedly to enter Bluetooth mode.3. Use the native controls on the connected Bluetooth Device to select a track.4. To play, pause or skip the selected track, use the native controls on the connected Bluetooth Device.5. Audio played through the connected Bluetooth device will now be heard through the speakers. 1. Power on the unit by pressing the Power button. 2. Press the Source button repeatedly to enter Bluetooth mode.The display will show “BT”.3. Press the Pairing button on the top of the unit. The Pairing Indicator will ash blue quickly.When pairing, remain within 3 feet of the unit.4. Using the native controls on your Bluetooth device, select the “ITB123” in your Bluetooth settings to pair.If your device requests a password, enter the default password “ 0 0 0 0 ”. Refer to the user’s manual for your specic device for instructions on pairing and connecting Bluetooth devices.5. When successfully paired and connected, a beep will issue from the unit and the Pairing Indicator will display a solid blue light.After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device.If your device should become unpaired or you nd it is unable to connect, repeat the above steps.ITB123B-811-01-IB.indd 10 4/17/2013 1:48:20 PM
Customer Support: 1-888-999-421511StandAttaching the Stand1. Align the holes in the bottom of the unit to the holes in the base.2. Use a philips-head screwdriver to tighten or remove the screws. Using an power drill could damage the TV stand.Wooden Stand x 1Mounting Screw x 2ITB123B-811-01-IB.indd 11 4/17/2013 1:48:21 PM
Copyright © 2012 Digital Products International (DPI, Inc.) | All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without noticeTo download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.comPara descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.comPour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur:www.iLiveElectronics.comEmail Support: prodinfo@dpiinc.comEmail Parts: partsinfo@dpiinc.comPhone Support: 1-888-999-4215Website: www.iLiveElectronics.comGreen InitiativeInternational SupportContact InformationCompany InformationEnvironmental Commitment to ‘Protect for Today and Sustain for Tomorrow’On a continual basis DPI, Inc. is making eorts to sustain the environment and improve the recyclability of its products and packaging. Focusing on “protecting for today and sustaining for tomorrow” DPI, Inc. has committed to reducing packaging size, increasing the usage of recyclable plastics, and ensuring that packaging and manuals are made with up to 85% recycled material. In addition to material consideration, DPI, Inc. has also focused on the ner details that positively impact the environment such as employing the usage of soy-based inks. DPI, Inc. also ensures that the factories that produce the company’s wide variety of consumer electronics adhere to environmentally friendly air and water restrictions. This is yet another example that every step of the way DPI, Inc. is making eorts to lessen any impact on the environment.In 2011 DPI, Inc. also began conversations with Energy Star in order to ensure that the consumer electronics being produced meet high standards of energy eciency. The ultimate goal is keeping energy costs for consumers low while providing quality, feature-rich products.For Warranty Information and the most up-to-date version of this User’s Guide, go to:www.iLiveElectronics.comWarrantyITB123B-811-01-IB.indd 12 4/17/2013 1:48:21 PM

Navigation menu