Junlan Electronic CHT921 Sound bar with FM/Bluetooth Music Player User Manual CHT917BT IB English

Shenzhen Junlan Electronic Ltd Sound bar with FM/Bluetooth Music Player CHT917BT IB English

Exhibit 08 Users Manual

Size: 148.5(W) x 210(H)mm (A5)Stereo Sound Bar System with Bluetooth® Wireless TechnologyStereo Sound Bar System with Bluetooth® Wireless TechnologyModel: CHT921PLEASE READ BEFORE OPERATING THIS EQUIPMENT.Owner's Manual
WARNING:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures: •Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help. •••FCC WarningsFCC NOTICE:To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user’s authority to operate this device.
2. Mounting the Speaker Bar onto a wallWe recommend having this speaker professionally mounted. By using the included wall mounting accessories, the sound bar can be mounted onto a wall.Distance Between Two Brackets1. Placing on the tableWhen placing the Sound Bar on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could produce a potential heat hazard. 16.4 inchesAC/DC adapterTo the DC IN jack on the rear of unit.to the wall outlet having AC 100-240V~, 50/60 Hz.Insert the small plug from supplied AC/DC adaptor to DC IN jack on the rear of the unit and insert the AC/DC adaptor AUX 2NOTE:This AC/DC Adapter is intended to be correctly orientated in a vertical or floor mount position. 3
1. Mark the position of the mounting screws on the wall using a pencil.2. Drill the supplied screws directly into the marks that you have made on the wall and leave approx. 0.3 inch length to hook the sound bar. 3. Put the sound bar onto the mounting screws. Make sure they are firm and stable.4You may use2 pieces plastic inserts (Included)2 pieces screws (Included)1. Mark the position of the mounting screws on the wall using a pencil.3. Insert the supplied plastic inserts into the holes by hammer .5. Put the sound bar onto the mounting screws. Make sure they are firm and stable.(1) (2)4. Secure the supplied screws into the plastic insert and leave approx. 0.3 inch2 pieces screws (Included)2.2 Mounting on the wooden wall:You may use 16.4 inches 16.4 inches2.2 Mounting on the wall2.1 Mounting on the wooden wall2. Drill 2 x 7/32 inch diameter holes by a powerful electric drill ( Not supplied ).( Not Supplied )length to hook the sound bar.
5Front View Back View IndicatorAUX 1 ANTANT (Antenna) AUX 1 DC INSide ViewAUX 2FM SCANPOWER/SOURCEVOLUME + VOLUME -AUX 2DC INDC 16V,1.8A
6VOL+EQ VOL-BASS- BASS+TREBLE- TREBLE+ SOURCE123456789101112131. Power6. /TUNE -7. 10. BASS +4. BASS -8. ( Mute )13. / TUNE +12. EQ ( Equalizer )2. VOL ( Volume ) -5. TREBLE -9. VOL ( Volume ) +3. SOURCE 11. TREBLE +TUNE- TUNE+
7BATTERY PRECAUTIONSFig.1 Fig.2 Fig.3-First Time UseRemove and discard the insulation tab as figure on the right.-Replacing Batteries For Remote Control1. Push and slide out the battery holder as figure 1 below.3. Close the battery holder.2. Replace the battery with a new CR2025 button cell as the polarity markings on the rear of the Remote Control. °Remote Sensor 30 °30
8FM Antenna1. Power ON the unit as previous procedures.Repeat the same procedures until the desired radio station was received and plays.starts blinking. The unit will start to search next ( or previous ) available FM radio station then plays.The Antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind and extend the wire or relocate the wire to improve the radio reception.LISTEN TO FM RADIOBLUETOOTH PARING AND PLAYBACK1. Power ON the unit as previous procedures.3. Power on the external BT Device and enter to searching mode.Startto the user's manual of your BT Device. )Notes: When the external BT Device searched the unit, our model number "CHT921" will appear on the display of the external BT Device.Pairing code "0000" may need to enter.Normal operation after paired:1. Turn on the BT function of the external BT Device.2. Power ON the unit as previous procedures.4. Wait a few seconds until the unit paired to the external BT Device automatically.5. Play the music in the connected BT Device as usual.6. During playback:--Press the button to pause; press again to resume normal playback.--Press the / TUNE - or /TUNE + buttons to skip tracks.pairing as the on screen instructions on the external BT Player. After paired, the Indicator will stop blinking. ( For details pairing procedures, please referBT ( Blue Tooth )~ Purple: Radio~ Blue: BT ( Blue Tooth )~ Green: AUX 1~ Orange: AUX 24. During Playback:~ Press the VOL ( Volume ) +/- buttons to adjust volume level as desired.~ Press the EQ button repeatedly to select and set equalizer mode as desired.~ Press ( Mute ) button on the remote control to turn off the sound. Press again to resume.GENERAL OPERATIONS1. Connect the AC/DC adapter to the unit and wall outlet as the previous procedure.6. If long period of time will not use the unit, unplug the AC/DC Adaptor from the wall outlet.3. Press the Power / SOURCE button on the unit or the SOURCE button on remote control repeatedly to switch to desired mode.The color of Indicator will turn to corresponding color as below: ~ Press the TREBLE +/- buttons to adjust the sound level of treble. the unit.The color of Indicator will turn Red. 3. Press the FM SCAN button on the unit to auto search and plays the next availble FM station.Repeat the same procedures until the desired radio station is searched and play. Or5. For fine tune, press and release the /TUNE - or /TUNE + buttons repeatedly.Note: When a FM stereo station was searched, the unit will plays it in stereo mode automatically.4. Press and hold the /TUNE - or / TUNE + buttons on the remote control until the indicator 2. Press the Power/SOURCE button on the unit or the Power button on the remote control to power on the unit from standby mode.The Red Indicator will light.5. When finished listening, press the Power /SOURCE button on the unit or the Power button on the remote control to power off ( Stanby mode ) In first time use or re-pairing to new BT Device, pairing the unit to external BT Device as follows:2. Press the Power/SOURCE button on the unit or the SOURCE button on the remote control repeatedly until the color of Indicator turns to Blue and blink. ~ Press the BASS +/- buttons to adjust the sound level of bass. ~ ~ 3. Press the Power/SOURCE button on the unit or the SOURCE button on the remote control repeatedly until the color of Indicator turns to Blue.2. Press the Power/SOURCE button on the unit or the SOURCE button on the remote control repeatedly until the color of Indicator turns to Purple.In first time use or re-pairing to new BT Device, pairing the unit to external BT Device as follows:In first time use or re-pairing to new BT Device, pairing the unit to external BT Device as follows:
1. Connect the Headphone/Earphone; Line out jacks from the external audio player ( such like MP3 player; Discman … etc ) to the AUX 2 jack on the Right side of unit by the supplied Audio Connection Cable as the figure below:Audio PlayerTo Phone Jack2. Connect the unit to the power as previous procedures.5. Power on the connected external player and start playback music as usual.AUX 2DVD1. Connect the Aux out jacks from the external audio player ( such like TV, DVD player VCR …etc. ) to the AUX 1 jacks on the rear of unit by the supplied RCA Connection Cable as the figure below:2. Connect the unit to the power as previous procedures. 3. Press the Power/SOURCE button on the unit or the Power button on the the remote control to power on the unit. 5. Power on the connected external player and start playback music as usual. redwhiteAUX 1 ANTDC INDC 16V, A1.8 repeatedly until the color of Indictaor turns to Green.AUX 1 : LISTEN TO TV/DVD/VCR/DVRAUX 2 : LISTEN TO EXTERNAL AUDIO DEVICESTo Audio Out Jacks94. Press the Power/SOURCE button on the unit or SOURCE button on remote control control repeatedly until the color of Indictaor turns to Orange.4. Press the Power/SOURCE button on the unit or the SOURCE button on remote 3. Press the Power/SOURCE button on the unit or the Power button on the the remote control to power on the unit.
Check the followings before requesting serviceSYMPTOM POSSIBLE CAUSE POSSIBLE SOULTION desired mode.Press the SOURCE button repeatedly to set the input source to the desired modeTROUBLESHOOTING GUIDENo powerNo soundSound distortionRemote not working Bluetooth reception failureHave not pairedThe external device is far fromthe unitThe battery is consumedVolume level too highBass level of the connected device too highInput source incorrectThe connected device is not in payback modeVolume in minimum positionThe unit is in Standby modeConnect the power AC/DC adapterPress button to turn on the unitRaise volume level by pressing the VOL (Volume) + buttonPlay the music/movie in the connected device as usual and make sure the volume level of it is in high levelReduce the bass level of the connecteddevice.VOL (Volume ) - buttonReduce the volume level by pressing the Replace with new batteryPut the external BT device close to theunitPair both units as BT pairing pagePower AC/DC adapter not connected Press the BASS - button on the Sound Bar to reduce bass level.10
Power Source........................................................................................ DC 16V; 1.8A,Radio Coverage................................................................................................FM 87.5 -108.0 MHz---Remote Effective Range.............................................................................................Up to 16 feetBluetooth Effective Range in Open Aera......................................................................Up to 32 feet1 x Remote Control, using CR 2025 button cell ( Included, already installed in remote control )1 x Stereo Audio Connection Cable with 3.5mm stereo plugs1 x User's Manual1 x AC/DC Adaptor ( Input: AC 100-240V~ 50/60Hz; 1A Max. Output: DC 16V; 1.8A, ) 1 x RCA Connection Cable2 x Metallic Screws ( For Wall Mount )2 x Plastic Inserts ( For Wall Mount )Impedance of Speakers: Loud Speakers ....................................................................................................... 8 Ohm, 15W x 2---11
Size: 148.5(W) x 210(H)mm (A5)Craig warrants this product to be free from manufacturing defects in material andworkmanship under normal use for a period of 90 days from date of purchase. If serviceis required, please return the product to the store where it was purchased for exchange;or, pack the unit in the original packing material with all accessories if applicable, a copyof your sales receipt and a Cashier’s check or Money Order for $15.00 (to cover shippingand handling costs) payable to Craig Electronics Inc. For consumers in Canada, pleasemake sure that the cashier check or money order is redeemable through a U.S. bank.Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit cannot be repaired or replaced, a refund will be forwarded to you within four weeks of receiptof your unit. Please ship your unit to:Craig Electronics Inc.1160 NW 163 DriveMiami, Fl 33169This warranty is void if the product has been: a) Used in a commercial application or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by anyone other than an authorized Craig service center. d) Damaged because it is improperly connected to any other equipment.Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s Manual which can be performed by the customer. b) Damage to equipment not properly connected to the product. c) Any cost incurred in shipping the product for repair. d) Damage to the product not used in the USA.This warranty is not transferable and only applies to the original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration to the period of this expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter.Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state. Some states do not allow limitations on implied warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you.To Obtain Service on your Productemail:service@craigelectronics.comPrinted in China CHT921_WC_E0CL4_H0USLIMITED WARRANTY

Navigation menu