Junlan Electronic CD698 STEREO SUITCASE TURNTABLE SYSTEM WITH BLUETOOTH WIRELESS TECHNOLOGY User Manual

Shenzhen Junlan Electronic Ltd STEREO SUITCASE TURNTABLE SYSTEM WITH BLUETOOTH WIRELESS TECHNOLOGY

User Manual

Model: CD698PLEASE READ BEFORE OPERATING THIS EQUIPMENT.Owner's ManualSTEREO SUITCASETURNTABLE SYSTEMwith Bluetooth® wireless technologySTEREO SUITCASETURNTABLE SYSTEMwith Bluetooth® wireless technologySize: 148.5(W) x 210(H)mm (A5)2016.07.1317:39:53+08'00'2016.07.1318:12:34 +08'00'
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, DO NOT EXPOSE THIS PRODUCT TO RAINOR MOISTURE.WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, AND ANNOYING INTERFERENCE, USE THERECOMMENDED ACCESSORIES ONLY.FCC NOTICE:This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant topart 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmfulinterference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energyand, if no nstalled and use n accordance with theinstructions, may cause harmful interference to radiocommunications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or televisionreception, which can be determined by turning theequipment off and on, the user is encouraged to try tocorrect the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.FCC WARNING:To assure continued compliance, follow the attachedinstallation instructions and use only shielded cableswhen connecting to other devices. Modifications notauthorized by the manufacturer may void user`s authorityto operate this device.IMPORTANT SAFETY INSTRUCTIONSCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTEMOVE COVER (OR BACK). NO USER-SERVICEABLE ARTNSIDE EFER SERVICING T UALIFIED ERVICE PERSONNEL.The lightning flash with arrowhead symbolwithin an equilateral triangle is intended to alertthe user to the presence of uninsulateddangerous voltage within the product`senclosure that may be of sufficient magnitude toconstitute a risk of electric shock to persons.The exclamation point within an equilateraltriangle is intended to alert the user to thepresence of important operating andmaintenance(servicing) instructions in theliterature accompanying the appliance.S IPSOQ.RR2t d ii2016.07.1318:12:42+08'00'This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Before using the unit, be sure to read all operating instructions carefully. Please note that theseare general precautions and may not pertain to your unit.For example, this unit may not have the capability to be connected to an outdoor antenna. 1) Read these instructions. All the safety and operating instructions should be read before the product is operated.2) Keep these instructions. The safety and operating instructions should be retained for future reference.3) Heed all warnings. All warnings on the product and in the operating instructions should be adhered to.4) Follow all instructions. All operating and use instructions should be followed.5) Do not use this apparatus near water. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.6) Clean only with dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11)Only use attachments/accessories specified by the manufacturer.12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. An appliance and cart combination should be moved with care. Quick stop, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.13) Unplug this apparatus during lightning storms or when unused for long periods of time.To protect your product from a lightning storm, or when it is left unattended and unused for longperiods of time, unplug it from the wall outlet and disconnect the antenna or cable system. Thiswill prevent damage to the product due to lightning and power-line surges.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatushas been damaged in any way, such as power-supply cord or plug is damaged, liquid hasbeen spilled or objects have fallen into the apparatus, the apparatus has been exposed to rainor moisture does not operate normally, or has been dropped.15) Power sourceThis product should be operated only from the type of power source indicated on the marking label.If you are not sure of the type of power supply to your home, consult your appliance dealer or localpower company. For products intended to operate from battery power, or other source, refer to theoperation instructions.16) Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. IMPORTANT SAFETY INSTRUCTIONS32016.07.1318:12:48 +08'00'
17) Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.18) Object and liquid entry Never push objects of any kind into the product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.19) Outdoor antenna grounding If an outside antenna is connected to the product, be sure the antenna system is grounded so as to Provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code ANSI/NFPA 70 provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product, size of grounding conductors, location of antenna-discharge product, connection to grounding electrodes and requirements for the grounding electrodes.20)Service Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.21)Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire or electric shock or other hazards.22)Safety check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.3 24)Damage requiring service Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions. a) When the power-supply cord or plug is damaged. b) If liquid has been spilled or objects have fallen into the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an adjustment of other controls may result in damage and will require extensive work by a qualified technician to restore the product to its normal operation. e) If the product has been dropped or the cabinet has been damaged. f) When the product exhibits a distinct change in performance-this indicates a need for service.2)Note to CATV system installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. NOTE: Refer all servicing to qualified service personnel. Servicing is required when the unit has been damagen any way such as the following: the power-supply cord or plug has been damaged, liquid has beepilled into unit, the unit has been exposed to rain or moisture, the unit has been droppe r the unit doeot operate normally. IMPORTANT SAFETY INSTRUCTIONSd in s d o s n4This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.2016.07.1318:12:54+08'00'
Front View and Rear ViewTurntable and Function PanelLocation of ControlsEN IINL BO TNOHP LINE INHEADPHONEONOFF12 3456789101112131. Turntable platter2. Turntable center spindle3. 45 RPM adapter4. Lever5. Tone arm holder6. LINE IN jack7. Speed selector8. Function knob9. Tone arm11. Indicators12. HEADPHONE jack13. Stylus14 15161716LINE OUTRL1817. DC IN jack18. LINE OUT jacks14. Metallic buckle15. Handle16. Speakers10.Power ON-OFF/Volume knob5INDICATORDC INDC 9V,1000mA2016.07.1318:13:02+08'00'
Operation2. Plug the AC/DC Adapter into a conveniently located AC outlet having AC 100-240V~, 50/60Hz.AC outletAC/DC AdapterTo the DC IN jack on the rear of the unit.Power Source1. Connect the small plug from the supplied AC/DC Adaptor to the DC IN jack on the rear of unit.Notes:~ This AC/DC Adaptor is intended to be correctly orientated in a vertical or floor mount position.~ For saving energy, if long period of time will not use the unit. Unplug the AC/DC Adaptor from wall outlet.1. Open the top cover as the illustrated follows:2. Connected the unit to AC power as instructed earlier. 3. Turn the Power ON/OFF--Volume knob clockwise to power on the unit and set the volume to the desired level. The indicator will illuminate.4. Turn the Function selector to the desired position.5. When finished listening, turn the Power ON/OFF--Volume knob counterclockwise until “Click” is heard to shut off the unit. The indicators will not light.6. Close the cover then lock it.6General Operation:122016.07.1318:13:07 +08'00'
Listening through BluetoothIn first time use or re-pairing to a new BT Device, pairing it as below:3. Plays the music in the paired BT Device as usual.Notes:Pairing code “0000” or “1234” may need to enter. 3. Plays the music in the paired BT Device as usual.4. During playback, using the control buttons on the paired cell phone to skip the tracks; pause; play...etc.1. Power on the unit and turn the Function selector to BT position as the instructed earlier. The color of indicator will turn to Blue and blink.2. Power on the external BT Device and enter to BT searching mode. Start pairing as the on screen instructions on the external BT Device. After paired, the Blue indicator will stop blinking, the tone sound of connected will hear. (For details pairing procedures, please refer to the user’s manual of your BT device.).When the external BT player searched the unit, our model number “CD698” will appear on the display of external BT Device.1. Power on the unit and turn the Function selector to the BT position as the instructed earlier. The color of indicator will turn to Blue and blink. 2. Wait a few seconds until the unit auto paired to the external BT Device. (The Blue indicator will stop blinking, the tone sound of connected will be heard).7(BT) Bluetooth:Normal operation after paired:2016.07.1318:13:15 +08'00'
Listening a Record1. In first time use, take off the protective cover from the stylus as the illustrated below:2. Place the Record on the center spindle. 3. Slide the Speed selector to 33; 45 or 78 to match the play speed of the record.4. Unlock the Tone Arm from the holder as the illustrated below: clipNote: If you are playing a 45 RPM Single (small size record), place the supplied 45 RPM 5. Power on the unit and turn the Function selector to the PHONO position as the instructed6. Raise the Lever to raising the Tone Arm then move it to the top of the desired location7. When finished playback, the unit will auto stop turning (or you wants to stop immediately); adapter to the center spindle then place the record on it. earlier. The color of indicator will turn to Red.raise the Lever to rising the Tone Arm then put it back to the Holder. of the record. Release the Lever to put the Tone Arm onto the record. Plays will auto start. 8Plastic protective cover (White color) Release the Lever then lock the Tone Arm on the Holder.2016.07.1318:13:20 +08'00'
LINE OUTRLLINE IN:Mobile PhoneTo the Line In/AUX In jacks on the external Audio Amplifier Other Connections(Audio Connection Cable supplied) (Connection Cable not included) To LINE IN jack on the unitConnect to the Phones; AUX Out;Line Out Jack of the external devices (Such like MP3 Player; cell phones; iPod/iPad ... etc)LINE OUT:To the Line In/AUX In jacks on the externalLINE INRedWhiteHEADPHONE:For private listening, connect the 3.5mm plug from the Earphone/Headphone (not supplied) into the HEADPHONE jack on the top of unit. Sound from speakers will be auto cut. To listening from external Audio Amplifier:1. Connect one end of the RCA Audio Connection Cable (not supplied) to the Line IN Jacks or AUX IN Jacks on the external Audio Amplifier.2. Connect the other end of the cable to the LINE OUT jacks on the rear of unit as the illustrated below:3. Power on the unit and plays music as usual as the instructed earlier. 4. Power on the external Audio Amplifier and set it to LINE IN mode to plays the music from this unit.Listen music from the external Audio Player as follows:1. Connect one end of the supplied Audio Connection Cable to the Phones Jack; Line Out Jack or AUX Out Jack on the external Audio Player.2. Connect the other end to the LINE IN Jack on the top of unit as the illustrated below:3. Power on the unit and turn the Function selector to the LINE IN position as the instructed earlier. The color of indicator will turn to Purple.4. Plays the music on the connected external Audio Player as usual.Note: Make sure the volume level of the external Audio Player was set to high. Otherwise, sound from this unit may weak.9 Audio Amplifier DC INDC 9V,1000mA2016.07.1318:13:26+08'00'
Records HandlingReplace the stylusthen pull it out as the illustrated below: 2. Install the new stylus as illustrated below:1. Use a screwdriver (not supplied) to push the stylus off Guide Pins (inside)10label groovesedgeDo not touch the record's grooves. Only handle records, by the edges or the label. Make sure your hands are clean. Skinoils from even clean hands can leave a residue on the record surface that will gradually deteriorate the quality of your record.Keep your hands away from dust. Keep them in a cool, dry place.To avoid dust and scratches, keep records in their sleeves and jackets when not in use.Store records upright on their edges. Records stored horizontally will eventually bend and ward.Do not expose records to direct sunlight or high humidity and temperature. Long exposure to high temperatures will will warpthe record.Do not store your records in the trunk of your car. The temperature in a closed trunk can ruin your collection.Store records in an area with a stable temperature an dlow humidity.Should the record become dirty, gently wipe the surface in a circular motion, using a soft anti-static cloth.If the stylus was abrased after long time use, replace it by the supplied extra style as follows:2016.07.1318:13:31+08'00'
Troubleshooting Guide6\PSWRP 3RVVLEOH &DXVH 6ROXWLRQ3RZHU1R SRZHU$&'& $GDSWRU KDG QRWFRQQHFWHG WR XQLW RU ZDOORXWOHW&RQQHFWHG WKH $&'&$GDSWRU WR WKH XQLWZDOO RXWOHW3RZHU 212))9ROXPHNQRE LV RQ SRZHU RII SRVLWLRQ7XUQ WKH 3RZHU212))9ROXPH NQREFORFNZLVH WR SRZHU RQWKH XQLW DQG VHW WKHYROXPH WR WKH GHVLUHGOHYHO7XUQWDEOH1RLVH RU VRXQG GLVWRUWHG6SHHG VHOHFWRU ZURQJVHWWLQJ6HW WKH 6SHHG VHOHFWRUWR WKH FRUUHFW SRVLW  RU  DV WKHUHFRUG7KH VW\OXV PD\ DEUDVLRQDIWHU ORQJ WLPH XVHG 5HSODFH LW E\ WKHVXSSOLHG%7%7 QRW IXQFWLRQLQJ 7KH %7 'HYLFH KDG QRWSDLUHG WR WKH XQLW3DLUHG WKH %7 'HYLFHWR WKH XQLW DV SDJH6RXQG ZHDN RU GLVWRUWLRQ 7KH %7 'HYLFH 3ODFH WKH %7 'HYLFHFORVH WR WKH XQLW11DGQRQLSOD\LQJVSHHG RIH[WUD VW\OXVDV SDJHIDU IURP WKH XQLWWRR2016.07.1318:13:36+08'00'
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGEWITHOUT NOTICE3RZHU 6RXUFH '& 9 P$$XGLR 3RZHU : 506 [ ,PSHQGHQFH RI 6SHDNHUV  2KP : [ %7 9HUVLRQ %7 (IIHFWLYH 5DQJH  IHHW LQ RSHQ DUHD7XUQWDEOH6SHHG    USP VHOHFWDEOH7\SH RI 6W\OXV &6& [ 8VHU¶V 0DQXDO [ $&'& $GDSWRU ,QSXW $& 9a  +] $ 2XWSXW '& 9 P$  [ 6W\OXV RQH SUHPRXQWHG [  530 $GDSWRU [ $XGLR FRQQHFW FDEOH ZLWK  PP VWHUHR SOXJV12General SpecificationsAccessories2016.07.1318:13:42 +08'00'
Craig warrants this product to be free from manufacturing defects in material andworkmanship under normal use for a period of 90 days from date of purchase. If serviceis required, please return the product to the store where it was purchased for exchange;or, pack the unit in the original packing material with all accessories if applicable, a copyof your sales receipt and a Cashier’s check or Money Order for $12 (to cover shippingand handling costs) payable to Craig Electronics Inc. For consumers in Canada, pleasemake sure that the cashier check or money order is redeemable through a U.S. bank.Ship your product freight pre-paid. Your unit will be repaired, replaced or if the unit cannot be repaired or replaced, a refund will be forwarded to you within four weeks of receiptof your unit. Please ship your unit to:Craig Electronics Inc.1160 NW 163 DriveMiami, Fl 33169This warranty is void if the product has been: a) Used in a commercial application or rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by anyone other than an authorized Craig service center. d) Damaged because it is improperly connected to any other equipment.Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s Manual which can be performed by the customer. b) Damage to equipment not properly connected to the product. c) Any cost incurred in shipping the product for repair. d) Damage to the product not used in the USA.This warranty is not transferable and only applies to the original purchase. Any implied warranties, including the warranty of merchantability, are limited in duration to the period of this expressed warranty and no warranty whether expressed or implied shall apply to the product thereafter.Under no circumstance shall Craig be liable for any loss or consequential damage arising out of the use of this product. This warranty gives specific legal rights. However, you may have other rights which may vary from state to state. Some states do not allow limitations on implied warranties or exclusion of consequential damage. Therefore, these restrictions may not apply to you.To Obtain Service on your Productemail:service@craigelectronics.comPrinted in China CD698_WC_E0CL1_B0WULIMITED WARRANTY2016.07.1318:13:48+08'00'

Navigation menu