Junlan Electronic CAB43655 BLUETOOTH SPEAKER WITH BUILT IN RECHARGEABLE BATTERY User Manual

Shenzhen Junlan Electronic Ltd BLUETOOTH SPEAKER WITH BUILT IN RECHARGEABLE BATTERY

User Manual

Model:BT2165GBBLUETOOTH SPEAKER WITH BUILT-IN RECHARGEABLE BATTERYPLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE OPERATING UNIT
FCC STATEMENT:This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interference that maycause undesired operation. The antenna(s) used for this transmitter must be installed toFCC NOTE:This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.-- Consult the dealer or an experienced radio/TV technician for help.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER ( OR BACK ). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.The exclamation point within an equilateral triangle is intended to alert user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance.The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert user to the presence of uninsulated “dangerous voltage” within the product’s enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to person.provide a separation distance of at least 8” from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter.shield cables when connecting to other devices. Changes or modifications not expresslyapproved by the party responsible for compliance could void the user's authority tooperate the equipment.WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNITTO RAIN OR MOISTURE.To assure correct operation, follow the attached installation instructions and use only2"This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body."
IMPORTANT SAFETY INSTRUCTIONSBefore using the unit, be sure to read all operating instructions carefully. Please note thatthese are general precautions and may not pertain to your unit. For example, this unit maynot have the capability to be connected to an outdoor antenna.1. Read these instructions – All the safety and operating instructions should be readbefore the appliance is operated.2. Keep these instructions – The safety and operating instructions should be kept forfuture reference.3. Heed all warnings – All warnings on the appliance and in the operating instructionsshould be adhered to.4. Follow all instructions – All operation and use instructions should be followed.5. Do not use this unit near water, for example, near a bath tub, washbowl, kitchen sink,laundry tub, in a wet basement, or near a swimming pool.6. Clean only with dry cloth – The unit should be cleaned only as recommended by themanufacturer.7. Do not block any ventilation openings. Install in accordance with the manufacturer’sinstructions. The unit should be situated so that its location or position does notinterfere with its proper ventilation. For example, the unit should not be situated on abed, sofa, rug, or similar surface that may block the ventilation openings; or placed ina built-in installation, such as a bookcase or cabinet that may impede the flow of airthrough the ventilation openings.8. Do not install near any heat sources such as radiators, heat registers, stoves, orother apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarizedplug has two blades and a third grounding prong. The wide (the third prong) isprovided for your safety. If the provided plug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs,convenience receptacles, and the point where it exits from the unit.11. Only use attachments / accessories specified by the manufacturer.12. Use only with a cart, stand, tripod, bracket, or table specified by themanufacturer, or sold with the unit. When a cart is used, usewith caution when moving the cart/unit combination to avoid injuryfrom tip-over.13. Unplug this unit during lightning storms or when unused for long periods of time(such as while on vacation).14. Refer all servicing to qualified service personnel. Servicing is required when the unithas been damaged in any way, such as power-supply cord or plug is damaged, liquidhas been spilled or objects have fallen into the apparatus, the apparatus has beenexposed to rain or moisture, does not operate normally, or has been dropped.15. This unit should not be exposed to dripping or splashing water and no objectsfilled with liquids such as vases should be placed on the unit.16. Power Sources – The appliance should be connected to a power supply only of thetype described in the operating instructions or as marked on the appliance. Do notoverload wall outlet.17. Battery should not be exposed to excessive heat such as sunshine, fire, etc.18. Battery could burst open if incorrectly replaced. Replace only with the same orequivalent type.19. Do not attempt to dismantle, open or repair this product yourself. If a problem occurs,seek advice from your local qualified service technician or contact the distributor atthe telephone number at the back of this instruction manual.20. Caution marking and nameplate are located on back or bottom of product.3
Product Overview8912345671.Built-in microphone2.Volume Up (+) button3.Next ( ) button5.Volume Down ( ) button6.Previous ( ) button7.Bluetooth/Battery indicator8.USB charging port9.AUX IN jack4.Play/Pause/Standby On-Off/Phone button4
2.If the battery is completely charged, the indicator red light turns off.3.Remove the charging cable from the Speaker and PC.Note:Battery CautionPOWER ON/OFFNote:-Automatic connection If supported by your player (e.g. mobile phone), the devices will beconnected automatically. The prerequisite for this is:- In Bluetooth mode, the Speaker will send an alarm sound every 30 seconds or so when the battery is nearly exhausted.The unit is operated by an integrated lithium battery. Charge the battery as follows: 1.Plug the micro B USB plug of the charging cable into the jack of the unit. Connect the USB plug to a powered-on computer. The indicator lights up red and the battery begins to charge.--The battery (batteries or battery pack) should not be exposed to excessive heat such as sunshine, fire, etc.-Battery could burst open if incorrectly replaced. Replace only with the same or equivalent type.- Turn on the Speaker by pressing and holding Standby button. The Bluetooth indicator will start to blink.-Device (i.e., mobile phone) will connect if: 1.Devices were already paired with each other.2.Bluetooth is activated in your player. - Hold the Standby button to turn off the Speaker. The units are now disconnected.SYNC’ING (SYNCHRONIZING) YOUR BLUETOOTH DEVICETO YOUR SPEAKERNote: The speaker will connect to your Bluetooth device automatically once you have sync’dthem.1. When you are sync’ing the devices, make sure the speaker and your Bluetooth device areclose together. When the speaker is in Power Off state, hold “Power/Stand by” button downuntil the blue light comes on and blinks. Once this happens you have now begun the sync’ingprocess. (NOTE: if you do not sync the devices in a reasonable amount of time, the sync’ingprocess will abort and the LED light will turn off. Repeat Step 1 to start again.)2. Make sure Bluetooth is activated on your Bluetooth device. For details about the Bluetoothsearching device function, please refer to the user manual for that specific device.3. Pull up the list of Bluetooth devices on the device you are trying to sync and you will see“BT2165”. If “BT2165” is not on the Bluetooth’s list, select “Scan” to search for it. Then click onthat to start the pairing process.BATTERY CHARGING5
4. If it asks for a password, input pass code “0000” and confirm it to connect to speaker. Whenit has finished the sync’ing process, the blue LED light stays on all the time.Note: If an audio cable is connected to the AUX IN jack, the connection via Bluetooth will notwork.Note:-Depending on the device manufacturer, you need to perform the registration (PAIRING) againto connect the devices.-If there is a problem with the pairing of a playback device, deactivate The WiFi and mobiledata function in your playback device.-To ensure an optimal connection, make sure that the battery of your player is completelycharged.-If a mobile phone on which you are playing music receivesa call, the music will be interrupted.Press the Phone button to accept the call and the caller’s voice will be heard through thespeakers. For your conversation, speak into the microphone of the device. After you haveended the call, the devices are connected to each other again and playback continues.Note:The speaker will enter standby mode after about 10 minutes if no pairing/Bluetooth connectionis attempted.DURING PLAYING:-Press the volume + or - button to adjust the volume level.-Press the Play/Pause button to pause, press again to resume playing.-Press the Previous or Next button to skip the track.Accepting / Ending/Refusing call in Bluetooth mode-Press the Phone button to accept an incoming call.-To end the call, press the Phone button again.-Hold the button to refuse an incoming call.AUX INAux in OperationAn external (auxiliary) audio source (i.e., personal CD or MP3 player) can be connected to thisunit and heard through the speaker.1. Connect the AUX 3.5mm cable (included) into the AUX IN socket on the right side of theunit.2. Connect the other end of the AUX cable into the headphone or Line Out socket of theexternal source.3. Turn on the Bluetooth speaker and the external audio device (such as your MP3 player).4. The volume can be adjusted from the Bluetooth speaker and from the external audio device.Select volume to the desired level.6
TroubleshootingProblem Possible cause SolutionCannot switch the speaker on. Battery exhausted Recharge the battery.No audio signal duringplayback through AUX.Volume of the external audiosource is too low.Increase the volume of theexternal audio device.Volume of the device too low Increase the volume with +buttonNo audio signal duringBluetooth connection.Speaker is switched off. Switch the Speaker on.Speaker is not paired to theaudio device.Check whether the connectionexists. If necessary, pair thespeaker to the audio sourceagain.Audio cable is connected. Remove the cable.Volume too low Increase the volume on thespeaker.Increase the volume on theaudio source.Cannot connect speaker. Pairing does not work. Check whether the audiosource supports the A2DPprotocol.Audio source is turned off. Turn the audio source on.Bluetooth is turned off on theaudio source.Turn the Bluetooth function onin the audio source.Bluetooth version is notsupported.Use another playback device.7
Technical SpecificationsAudio output ........................................................................................................... .......1.5W x 2Power supply:...................................................................................................................DC 5 VBattery:..............................................................................................3.7V,400mAh Lithium-lonsOperating time:................................................................................................approx. 3- 4 hours(with volume level set at 1/2 )BluetoothBluetooth support:.......................................................................................................V2.1+EDRThe right to make technical and design modifications in the course ofcontinuous product development remains reserved.is a trademark on a registeredtrademark of Bluetooth SIG Inc. Allothertrademarks and trade names areACCESSORY1 X USB charging cableRange:.....................................................................................................................up to 30 feet8those of their respective owners.

Navigation menu