Jakks Pacific 58181TX XPV RC Extreme Performance Skateboard User Manual 58181 XPV RC Pro Skateboard 1L IS 02 032017FNL BIL
Jakks Pacific (HK) Ltd. XPV RC Extreme Performance Skateboard 58181 XPV RC Pro Skateboard 1L IS 02 032017FNL BIL
User Manual.PDF
![There is a built-in PTC to help protect themotor and battery from over-heating Skateboard may need to be immobile for a time allowingit to cool down while the PTC recovers. IMPORTANT SAFETY INFORMATIONNEVER use near glass and other fragile objects.NEVER drive near traffic, building, trees, people, animals, or other obstructions.NEVER operate during storms or other adverse weather conditions.1 25 63 47 8 TM & © 2017 MANUFACTURED BY JAKKS PACIFIC, INC., 2951 28TH STREET, SANTA MONICA, CA 90405 U.S.A.Contents may vary in style, color, shape and decoration from images shown on package or in advertising. Questions or comments? www.jakks.com, consumers@jakks.com, 1-877-875-2557 in North America, or 01344 638909 in the United Kingdom.ATTENTION! Remove and discard packaging ties and fasteners before giving toy to child.Retain packaging since it contains important information.MADE IN CHINAWarning. Not suitable for children under 36 months. Small parts. Choking hazard.www.jakks.comBATTERY INSTALLATIONASSEMBLYADULT INSTALLATION REQUIREDIf performance diminishes after purchase, replace with fresh batteries.Requires 2 x “AA” (R6/LR6) batteries (included) and 1 x 8.4V NIMH 700 mAH Battery NiMH Pack (included).ADULT INSTALLATION REQUIRED.BATTERY CHARGING CONTROLLER FUNCTIONS TROUBLESHOOTINGR/C PAIRINGBATTERY SAFETY INFORMATION WARNING! Battery acid leakage can cause personal injury and cause damage to the product and surrounding property. If battery leakage occurs, thoroughly wash any affected skin, making sure to keep battery acid away from eyes, ears, nose and mouth. Immediately wash any clothing or other surface that comes in contact with leaked battery acid. Leaking batteries may make "popping" sounds. Dispose according to Local, State or Federal Battery Laws.NEVER mix old and new batteries or different brands of batteries.NEVER mix alkaline, standard (carbon-zinc), rechargeable (nickel-cadmium) batteries with this product.58181 XPV® SKATEBOARD XPV® CONTROLLERSELF-RIGHTINGROLL BAR8.4V NIMH 700 MAH BATTERY PACKMICRO USB CHARGING CABLEMICRO USB CHARGING CABLE“AA” (R6/LR6) BATTERIES X2INSTRUCTION GUIDEXPV® XTREME PERFORMANCE SKATEBOARD 8+CONTENTSCONTROLLERSKATEBOARDJAKKS Pacific® Battery or Electrically-Operated Toy 90 DAY LIMITED WARRANTYThanks for purchasing a great JAKKS Pacific® product! Please immediately register your product online at www.jakks.com/warranty. Registration is not required for the effectiveness of this limited warranty.IMPORTANT NOTICE TO CONSUMER:This 90 DAY LIMITED WARRANTY applies to the original product purchaser, provided the product: 1) was purchased from an authorized JAKKS™ distributor/dealer/retailer, and 2) is returned at your expense, postage pre-paid and insured, along with the original dated sales receipt to the address noted below. Please save a copy of your original sales receipt, as the original receipt will not be returned to you. If you return the product to us without the original dated sales receipt, this warranty coverage will not apply. If the product is determined by JAKKS to be defective and returned to JAKKS within the 90 day warranty period, we will (at our option) repair or replace it. Return shipment to you may take up to 6 weeks, depending upon your location. If your product is repaired or replaced, it will be warranted for the longer of the original warranty or for 30 days after warranty service.SCOPE OF LIMITED WARRANTY: The product is warranted to be: a) tested and inspected before shipment, and b) free of defects in material and workmanship for 90 days from date of purchase. If a covered defect occurs within the warranty period, then at our sole option, we will repair or replace the product or provide you with another product of equal value.WHAT IS NOT COVERED BY LIMITED WARRANTY: THIS WARRANTY IS VOID IF THE PRODUCT HAS BEEN MODIFIED OR REPAIRED BY USER OR OTHERS OR IF IT HAS BEEN DAMAGED AS A RESULT OF ACCIDENT, IMMERSION IN WATER, NEGLECT, ABUSE, MISUSE, BATTERY LEAKAGE, IMPROPER BATTERY INSTALLATION, UNAUTHORIZED SERVICE, LOSS OF PARTS, WEATHER, ACTS OF GOD, ANY ACTION OR OMISSION WHICH CONSTITUTES A DEVIATION FROM THE OPERATING INSTRUCTIONS, OR ANY OTHER CAUSES NOT ARISING OUT OF DEFECTS IN WORKMANSHIP OR MATERIALS.EXCLUSIONS FROM LIMITED WARRANTY: THIS WARRANTY IS EXCLUSIVE OF AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES RELATED TO THIS PRODUCT, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES ARISING FROM POSSESSION, USE, OR MALFUNCTION OF THIS PRODUCT ARE EXCLUDED BOTH FOR PROPERTY DAMAGE AND PERSONAL INJURY TO THE EXTENT LEGALLY PERMITTED. ADDITIONAL LEGAL RIGHTS: This warranty provides specific legal rights. You may have other or different rights in your state or country.QUESTIONS OR COMMENTS: If you experience product difficulties or have questions or comments, you may contact our Consumer Relations department as follows: Phone: 877-875-2557 (toll-free, North America only) or 909-594-7771 (Monday-Friday, 7:30AM-4:30PM Pacific/GMT -8). Mail: JAKKS Consumer Relations, 21749 Baker Parkway, Walnut, California USA 91789. Email: consumers@jakks.comWHEN WRITING TO US: Please include: 1) product name; 2) item number; 3) purchase date; 4) description of the problem being experienced; and 5) your name, address and phone number. Additionally, if eligible under the warranty and so advised by JAKKS Consumer Relations, also include the defective product and the ORIGINAL dated sales receipt evidencing product purchase. Please retain a copy of your receipt.080309121233423Gently twist the SELF-RIGHTING ROLL BAR as shown.Lower the SELF-RIGHTING ROLL BAR into the SLOT.THIS VEHICLE IS DESIGNED FOR OUTDOOR USE AND ITS PERFORMANCE IS BEST OPTIMIZED ON HARD SURFACES SUCH AS CONCRETE AND ASPHALT. PERFORMANCE MAY VARY ON GRASS, LOOSE DIRT, WET SURFACES OR CARPET.Snap RIGHT POST into the round opening located on the SKATEBOARD chassis. Snap LEFT POST into the round opening located on the SKATEBOARD chassis.SLOTCHARGING PORT COVERBATTERY DOOR LOCATIONCONTROLLERBOTTOM VIEWLEDPAIRINGSUCCESSFULLEFTPOSTRIGHTPOSTNEVER dispose of batteries in fire, as they may leak and explode.ALWAYS remove exhausted batteries from toy.ALWAYS have an adult install batteries consistent with installation instructions.ONLY use batteries specified by manufacturer.Batteries are to be inserted with the correct polarity.The supply terminals are not to be short-circuited.Non-rechargeable batteries are not to be recharged.Rechargeable batteries are only to be charged under adult supervision. 1. Locate battery compartment on bottom of CONTROLLER HANDLE.2. Using a Phillips Head Screwdriver (not included), remove the screw and battery door.3. Install 2 new “AA” (R6/LR6) batteries.4. Replace the battery cover and the screw.1. Locate battery compartment on bottom of SKATEBOARD.2. Using a Phillips Head Screwdriver (not included), remove the screws and battery door.3. Install the 1 x 8.4V 700 mAH Battery NiMH Pack (included).4. Connect the BATTERY CABLES.5. Replace the battery cover and the screws.1122132Open the CHARGING PORT COVER on the SKATEBOARD and move the ON/OFF/CHARGING switch to charging. Plug the small end of the MICRO USB CHARGING CABLE into the SKATEBOARD. Plug the large end of the MICRO USB CHARGING CABLE into a 5V USB power source. Approximate charging time is 2 – 4.5 hours. LED light remain on when under charged. When fully charged, LED turns off. Remove the MICRO USB CHARGING CABLE and close the CHARGING PORT COVER.Move the ON/OFF/CHARGING SWITCH on the SKATEBOARD to the ON positionMove the ON/OFF SWITCH on the CONTROLLER to the ON position.Slowly rotate STEERING WHEEL RIGHT or LEFT to make a loose turn. Quickly rotate STEERING WHEEL RIGHT or LEFT to make a tight turn.Pull TRIGGER back to move the SKATEBOARD FORWARD. Push TRIGGER forward to move the SKATEBOARD in REVERSE. Maximum distance from CONTROLLER to SKATEBOARD should not exceed 50 feet.TRIM CONTROLMove the TRIM CONTROL LEVER to the RIGHT one position. Test and repeat if necessary.REPLACING THE WHEELS1Remove the AXLE NUT using a 5.4 mm NUT DRIVER (not included). Remove the WHEEL. Remove the LONG WHEEL ADAPTOR.Insert a SHORT WHEEL ADAPTOR (included) onto AXLE HUB.32456Install a new open market, 30mm 1/18 SCALE WHEEL* (Not Included). Install AXLE NUT and tighten with NUT DRIVER. Move the TRIM CONTROL LEVER to the LEFT one position. Test and repeat if necessary.Hold CONTROLLER next to SKATEBOARD (12 inches or closer). LED on CONTROLLER will change from BLINKING to SOLID when paired. If the units fail to pair, turn them both OFF, and repeat Steps 1 – 3 again.ROUNDOPENINGLEDLEDLEFT DRIFT RIGHT DRIFT*Wheel: Outside diameter: 1.45” (37mm); Width: 1.18” (30mm); Tires: Outside diameter: 2.39” (59mm); Width: 1.18” (30mm)*Wheel: Outside diameter: 1.45” (37mm); Width: 1.18” (30mm); Tires: Outside diameter: 2.39” (59mm); Width: 1.18” (30mm)[DESIGNED TO FIT 1/18 SCALE WHEELS* (Not Included)]RC / 2.4GHzSee Instructions [page 5] for correct pairing.Move switch to ON position.Ensure the batteries in the controller are fresh and the Skateboard Battery is fully charged.Make sure the Controller is placed within the signal receiving range.SOLUTIONSee Instructions [page 2] on how to install the included Roll Bar. The Roll Bar is able to help the skateboard self-right when ona hard surface and when it has enough momentum to get back on its wheels. There can be instances and conditions where the skateboard will land in a way that does not self right. Use the skateboard on a hard/even surfaces for best results.See instructions [page 5] on how to adjust the Trim Control.Check the tread on the tires. Make sure the left side and right side have equal wear. Replace tires [See page 7] if necessary. ADULT INSTALLATION REQUIREDADULT SUPERVISION REQUIRED ALWAYS PLAY IN SAFE SURROUNDINGS,AWAY FROM STREETS OR MOVING VEHICLESRepeat step 1-6 for the REAR WHEEL PROBLEMSkateboard won't move.Skateboard will not self-right.Skateboard will not go in a straight line.POSSIBLE CAUSESkateboard is not paired with Controller.Skateboard/Controller is switched off.Weak Battery in Controller/Skateboard.Controller is not close enough to vehicle.Roll bar not present or installed correctly.Skateboard on a soft or uneven surface or does not have enough momentum to self-right.Trim Control may need adjusting.Tires may be worn on one side.The skateboard was ON and no longer responds to the controllerSkateboard may have entered sleepmode.If the remote control cannot wake up the skateboard,power OFF skateboard and then switch to ON and perform the pairing againThe skateboard suddenlystops.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter dout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.58181 XPV SkateboardSizE; 594mm x 210mm x 2Color: GrayscaleCHOKING HAZARD - Small parts.Not for children under 3 years.WARNING:REAR SHORT WHEEL ADAPTORS X2FRONT SHORT WHEEL ADAPTORS X2](https://usermanual.wiki/Jakks-Pacific/58181TX/User-Guide-3371924-Page-1.png)