JETOP SAHB48 Bluetooth Headset User Manual

JETOP INDUSTRIAL LIMITED Bluetooth Headset

User Manual

PowerPress and hold to power ON or OFFWireless HeadphonesUser’s Guide for Model SAHB48 v1978-01LEDMICVolume +/-Press to adjust volume.Play / Pause / SpeakerphonePress to play or pause audio. Press to answer incoming phone call.Pair BluetoothPress and hold for 9 seconds to pair Bluetooth.Features• Bluetooth Wireless: range - 33 ft.• Built-in microphone• Aux in (3.5mm audio input)• Folding adjustable headband• On-ear controls• Voice prompts announce headphone operations• Built-in rechargeable lithium ion battery: life - approx. 8 hrs• Micro-USB port for battery rechargeIncludes• 3.5mm audio cable• Micro-USB to USB charging cableDC Power Input MicrophoneIndicator LEDAux InBattery ChargingInitial charge time is approximately 2 hours. Charge fully before use. The low battery indicator will ash for 1 minute, then the unit will automatically power OFF. 1. Using a Micro-USB to USB cable (included), connect to the USB port of a powered on computer or USB power adaptor (not included) to charge the unit. LEDMICSTATUS INDICATORPower On Flashing blue lightCharging Solid red lightCharging Complete Light OFFPairing Flashing red / blue lightPairing Complete Solid blue lightSAHB48-1978-01-IB.indd 1 21/7/2017 10:37:03
Speakerphone1. To accept a call, press the button, or use the controls on the connected phone. 2. To end a call, press the button, or use the controls on the connected phone.3. To re-dial the last dialed number, press the button twice. Pairing Bluetooth & Playing AudioAfter initial pairing to a Bluetooth device, the headphones will stay paired unless unpaired manually by the user, or erased due to a reset of the device. If your device should become unpaired or you nd it is unable to connect, repeat these steps. 1. Press and hold the Power button to power on the unit. 2. Press and hold the Pair button for 7-9 seconds to begin pairing. The LED indicator will begin quickly ashing blue and red. When pairing, remain within 3 ft. of the unit.3. From your smartphone or other Bluetooth device, access Bluetooth Settings and search for nearby devices. Select SAHB48 when it is discovered.4. When successfully paired, the LED indicator will turn solid blue and a voice will announce “Bluetooth connected”.5. Audio played through the connected Bluetooth device will now be heard through the headphones. Use the controls on the connected device to select and begin playing audio. 6. Use the controls on the connected device or the earbuds to play, pause, skip, or change volume.Customer Support Customer Service: 1-888-999-4215 | Email Support: prodinfo@ dpiinc.com | Email Parts: partsinfo@dpiinc.comFor Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.comTo download this User’s Guide in English, Spanish, or French, orto get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.comPara descargar este Manual del Usuario en inglés, español yfrancés, o para obtener respuestas a preguntas frecuentes,visite la sección de apoyo en: www.iLiveElectronics.comPour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questionsfréquemment posées, consultez la rubrique d’assistance sur:www.iLiveElectronics.comCopyright © 2017 Digital Products International (DPI, Inc.).All other trademarks appearing herein are the property of theirrespective owners.Specications are subject to change without notice.Aux In Aux In mode will function even if the headphones are not powered on. To conserve battery power, keep them powered o when using Aux In. Requires a 3.5mm audio cable (included). 1. Connect a 3.5mm audio cable to the Aux In on the headphones and the audio output on an audio device. 2. Use the controls on the connected device to select and play audio.LEDMICSAHB48-1978-01-IB.indd 2 21/7/2017 10:37:03
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC warning

Navigation menu