JETOP IHB26B WIRELESS SPEAKER SYSTEM WITH SUBWOOFER User Manual

JETOP INDUSTRIAL LIMITED WIRELESS SPEAKER SYSTEM WITH SUBWOOFER

User Manual

OverviewWireless Speaker System with SubwooferUser’s Guide for Model IHB26B v1616-01Features• 2.1 channel stereo sound • Built-in amplier• 3 speakers: left, right, and subwoofer • LED light eects• Supports Bluetooth• Bluetooth Wireless range: 60 ft• Analog volume control• Bass and Treble controls• Aux In 3.5 mm audio input• USB port for device charging• AC power: built-in AC power cableIncludes• 3.5mm audio cable• User’s guideVolume Up/DownTreble Up/DownBass Up/DownStereo Speaker OutputsPair Bluetooth/LightsPress and hold to pair.Short press to turn lights ON or OFF.120V 60HzPOWERONOFFAUX INSPEAKEROUTPUTR LTREBLE VOLUME BASSUSB CHARGER ~PAIR / LIGHTSRear ViewPower ON/OFFUSB Power PortAux In 3.5mm Audio InputWarning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.• WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.• WARNING: Shock hazard - Do Not Open.• Caution and marking information is located at the rear or bottom of the apparatus.• Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely. • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.• Objects lled with liquids, such as vases, shall not be placed on the apparatus• WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive nish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.• WARNING: This product may contain chemicals known to the State of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands after handling.• This product meets and complies with all Federal regulations.1. Read these Instructions.2. Keep these Instructions.3. Heed all Warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specied by the manufacturer.12. Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.IMPORTANT SAFETY INSTRUCTIONS FCC WarningsAdditional Warnings• This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock.• Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualied personnel.• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.ATTENTIONRISQUE D' ÉLECTROCUTIONNE PAS OUVRIRCAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENThis equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.WARNING: The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.IHB26B-IB-Lab.indd 1 6/27/2016 4:34:54 PM
Aux InRequires a 3.5mm audio cable (included). 1. Connect a 3.5mm audio cable to the Aux In Input on the unit and the audio output on an audio device. 2. Use the controls on the connected device to select audio, play, pause, skip, and adjust the volume.To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.comPara descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.comPour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.comFor Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.comCustomer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.comCopyright © 2016 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.INTERNATIONAL SUPPORTProtect for Today Sustain for TomorrowMade Green120V 60HzPOWERONOFFAUX INSPEAKEROUTPUTR LTREBLE VOLUME BASSUSB CHARGER ~PAIR / LIGHTS120V 60HzPOWERONOFFAUX INSPEAKEROUTPUTR LTREBLE VOLUME BASSUSB CHARGER ~PAIR / LIGHTS120V 60HzPOWERONOFFAUX INSPEAKEROUTPUTR LTREBLE VOLUME BASSUSB CHARGER ~PAIR / LIGHTS120V 60HzPOWERONOFFAUX INSPEAKEROUTPUTR LTREBLE VOLUME BASSUSB CHARGER ~PAIR / LIGHTS120V 60HzPOWERONOFFAUX INSPEAKEROUTPUTR LTREBLE VOLUME BASSUSB CHARGER ~PAIR / LIGHTS120V 60HzPOWERONOFFAUX INSPEAKEROUTPUTR LTREBLE VOLUME BASSUSB CHARGER ~PAIR / LIGHTSPower & ChargingConnect the power plug to a standard power outlet.Connect SpeakersConnect the left and right speaker cables to the left and right audio outputs on the subwoofer.Charge DevicesUsing an appropriate USB power cable (not included), connect your device to the USB Power Port on the rear of the subwoofer.120V 60HzPOWERONOFFAUX INSPEAKEROUTPUTR LTREBLE VOLUME BASSUSB CHARGER ~PAIR / LIGHTSBluetooth Wireless Audio Pairing to a Device & Playing Audio After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you nd it is unable to connect, repeat the steps listed here. 1. Power ON the unit and press and hold the Pair button to begin pairing. The LED lights will begin ashing quickly. The lights will always ash during the pairing process, even if they are set to OFF. Once the pairing process is complete, the lights will return to OFF. When pairing, remain within 3 feet of the unit.2. Using the controls on your Bluetooth device, search for and select IHB26 in your Bluetooth settings to pair. If your device requests a password, enter the default password 0 0 0 0 . Refer to the user’s manual for your specic device for instructions on pairing and connecting Bluetooth devices. 3. When successfully paired, the LED lights will turn solid and an audible chime will sound from the speaker. Use the controls on the connected device to select audio, play, pause, skip, and adjust the volume.IHB26B-IB-Lab.indd 2 6/27/2016 4:34:55 PM

Navigation menu