JAMEASY BPVN01 JAMEASY PLUS User Manual jameasy user manual new eng low

JAMEASY INC. JAMEASY PLUS jameasy user manual new eng low

User Manual

Jameasy PlusviolinUser Guide BPVN01Thank you for purchasing the JameasyPlus. Please read this user guide before using the device. If this product will be used by young children, this manual should be read and explained to them by an adult.※ Please read the manual for the Jameasy application. (http://jameasy.com ‒ Product ‒ User manual) ComponentsThis package includes a Jameasy device and an user guide. The device contains a non-rechargeable button-type battery (CR2032) already installed. Clip the device onto a violinA scroll of a violin is the recommended place without corrupting the original sound of a violin. To prevent your violin from any physical damage, please remove the device after use. Battery ReplacementWhen the LED turns red, the battery (CR2032) should be replaced. Press the middle part of the device, and slide and remove the battery cover located on the head of the device as shown in illustration below. After removing the old battery, insert the new battery with the positive side (+) facing upward. Getting Started1. Search Jameasy app on Google Play or App Store and download the app on your smartphone or tablet.For more information about the Jameasy app and supported smart phone models, visit our website at ‘http://jameasy.com’※ Before following these steps, check whether data connection is available and Bluetooth is allowed of your smartphone.※ To turn on the device, press and hold the power button until 'beep-' sound and the LED lights up.PowerbuttonClipLEDStatusBattery coverRubberbuffer2. Remove the plastic insulation tab from your device and turn it on.※ The new productincludes a plastic tab to prevent a battery from discharging. Copyright ⓒ 2015 Jameasy Inc. All rights reserved<clip example> Power OFF / Sleep ModeTo turn off the device, press the power button until ‘beep’ sounds. The device will be turned off automatically when the device is left without connecting to the application more than one minute, or not used more than 10 minutes. Status LEDColors and blink period of LED show the status of the device described as below.LED Status LED off Power offPower on, Paring offPower on, Paring onPower on, Practice modeHave to replace batteryYellow, Short blinkYellow, Soft blinkYellow, Solid LEDRedInstructions3. Connect the device with your smartphone. Run the app and go to device setting screen in the app. When the device list is displayed, tap ‘connect’ button. The Status LED will softly blink yellow when the device is successfully connect-ed.WARNING : CHOKING HAZARD - Small partsNot for children under 3 years.
THE FCC REGULATION WARN-ING (for USA)NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-ence by one or more of the following measures : • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. ※ Specifications and appearance are subject to change without notice for improvement of product. Perchlorate material - special handling may apply.More information can be found at http://www.dtsc.ca.gov/Hazard-ousWaste/Perchlorate/index.cfm Leakage of battery fluid can cause personal injury as well as damage to your accessory. If battery leakage occurs, thoroughly wash the affected skin and clothes. Keep battery fluid away from your eyes and mouth. Leaking batteries may make popping sounds. To avoid battery leakage :• Do not use any battery other than the type specified for this product (CR2032).• Do not attempt to recharge the battery.• Do not put the battery in backwards. The positive side (+) should face outwards when inserted correctly.• Do not leave the battery in the access-ory for long periods of non-use.• Do not use damaged, deformed, or leaking battery.• Do not dispose of the battery in a fire.• Do not short-circuit the battery or the terminals in the battery compartment.• Do not attempt to disassemble the battery.• Do not expose the battery to extremes of heat or to liquids.• When the battery has no charge left, remove it from the accessory and dispose of properly, following appropri-ate local guidelines and regulations. To find a battery collection site near you, please contact your local solid authority or visit : http://www.call2recycle.org/ Troubleshooting• LED does not light up- Make sure the battery is installed correctly. (→ See Battery Replacement instructions). - Try removing the battery and then re-installing it. - Try replacing the battery.• LED does not light off.- Try removing the battery and then re-installing it. • Cannot connect to smart device (Jameasy application)- Please check whether there is a wireless AP or microwave oven near.• No response when you play the violin.- Please check whether the device has been disconnected from the applica-tion on your mobile device. - Make sure that the device is attached well to your violin.If you cannot resolve the problem with solutions stated above, please contact us. support@jameasy.comWARNING - BATTERY LEAKAGE SpecificationsModel NumBPVN01NameJameasy Plus violinB1(41.20 Hz) ‒ B6(1975.54Hz)Better than ± 1centDetection rangeDetectionaccuracyBluetooth v4.2WirelesstechnologyApprox. 32’(5m), actual rangedepends on the surrounding environment.WirelessrangeTemp. 14℉~104℉(-10℃ ~ 40℃)Humidity 0 ~ 85% EnvironmentCR2032(3V DC) Lithium Battery(non-rechargeable)Powersupply0.87” x 1.73” x 1.57” /22 x 44 x 40 mmDimension (W x D x H)0.53 oz/15g(including batteries)Approx. 24hours (A4 continuousinput, Bluetooth connected)WeightBattery lifeFCC ID : 2ALK7-BPVN01
FCC Warning StatementFCC Part 15.19This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Part 15.21Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.RF Exposure StatementFCC and IC RF Radiation Exposure Statement: This equipment complies with FCC and IC RF Radiation exposure limits set forth for an uncontrolled environment.This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.RF du FCC et IC d'exposition aux radiations: Cet équipement est conforme à l'exposition de FCC et IC rayonnements RF limites é-tablies pour un environnement non contrôlé. L’antenne pour ce transmetteur ne doit pas être même endroit avec d’autres émetteur sauf conformément à FCC et IC procédures de produits Multi-émetteur.

Navigation menu