Inventec BC0312AAA000 PDA PHONE User Manual

Inventec Corporation PDA PHONE

UserManual.wiki >

BC0312AAA000 User Manual >

Contents

1. users manual
2. USERS MANUAL
3. User Manual

User Manual

user manualPharos Traveler 117

Copyright © 2008 Pharos All Rights Reserved.No part of this manual, including the product and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without prior written permission from Pharos.Pharos provides this publication “as is” without warranty of any kind. This information could include technical inaccuracies or typographical errors. Pharos may make improvements and/or changes in the product. Information and specications contained in this document are subject to change at any time without notice.The information contained in this document does not affect or change the product specications or warranties. Pharos is not liable for any damages resulting from the use of this product.Trademark InformationMicrosoft, MS-DOS, Windows, Windows NT, Windows Server, Windows Vista, Windows Mobile, ActiveSync, Excel, Internet Explorer, Windows Live, Outlook, PowerPoint, and Word are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.All other trademarks are property of their respective owners.

This is only the beginning.We are constantly enhancing and improving our user experience.For the latest information on what we’ve added and how it works, visit us online:http://www.pharosgps.com/

4Please read the following information carefully before you start using the Pharos Traveler 117 to avoid any damage caused by improper usage:• The device is not charged when you take it out of the box. The battery should be charged for at least 8 hours before rst use. Do not remove the battery while charging.• Do not service any product yourself. Service needed on components inside these compartments should be done by an authorized service technician or provider.• Do not use batteries which have not been specied by the manufacturer, as this may cause leakage or rupture. Damage caused by using batteries not specied by the manufacturer is not covered under warranty.• Do not charge the battery with an unspecied AC charger, as this may cause damage to both the device and the battery.• Do not leave the AC charger in places where the temperature may be lower than -20°C(-4°F) or higher than 70°C(158°F) as this may damage the AC charger.• When discarding the batteries, dispose of them in a proper manner, according to the battery manufacturer’s instructions and your local laws.• Power off the device and remove the battery before inserting SIM card. Make sure the SIM card snaps correctly into the SIM socket.• Do not open or tamper with the device cover, as this will void your warranty.• Do not press hard on this product, as it may cause damage to the screen or the internal components.• Do not use the device at gas or refueling stations, chemical plants, and places containing explosives or ammable materials. The product should be placed away from heat sources such as radiators, stoves, or other products (including ampliers) that produce heat.• Do not strike, shake, or heat the device in a way which may cause battery leakage or rupture and damage to the device.• Use only a manufacturer-specied stylus. Do not scratch the screen or otherwise bring it into contact with any hard objects (e.g. loose change in your pocket).Important Precautions

5• Do not clean the screen with chemical detergents. Only use cloths specically designed for cleaning liquid-crystal displays. Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use water to clean the LCD screen.• Do not expose the device to prolonged direct sunlight, or leave the device in a humid environment for extended periods of time, as this may cause damage to the device and battery.• Do not immerse the device in water. Never use the product in a wet location.• The device may interfere with the navigation and/or communication systems on aircraft. The use of the device on an aircraft is prohibited by laws in most countries.• This product may cause medical equipment to malfunction. The use of this device is forbidden in most hospitals and medical clinics.• Always use hands-free devices, if you need to use the telephony services, while driving a vehicle.• Please turn down the volume before using headphones or other audio devices.• Do not place the product on an unstable base.• Do not push objects of any kind into cabinet slots or other openings in the device.• The device should be operated from the type of power indicated on the marking label. If there are noticeable signs of overheating, unplug the device from the electrical outlet immediately and refer servicing to an authorized service provider.• WARNING: Do not remove or damage the warranty void label on the device, as this will void your warranty.Non-Ionizing RadiationThis product should be operated only in the suggested typical conditions to ensure good radiative performance and safety from interference. For safety reasons, as with all other mobile radio-transmitting equipment, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment.

6Table of ContentsChapter 1 | Overview 091.1 Introduction 101.2 Introduction cont. 121.3 Installing SIM Card, Battery and Micro SD Card 131.4 Battery Information 17Chapter 2 | Basic Operations 192.1 Getting Started 202.2 Ostia Button 202.3 Today Screen Components 212.4 Start Menu 222.5 Programs, Settings and Icons 232.6 Input Methods 26Chapter 3 | Synchronizing Information 293.1 Installing and Setting up ActiveSync 303.2 Installing and Setting up WMDC 313.3 Synchronizing Information 313.4 Changing Settings for an Information Type 323.5 Synchronizing with Exchange Server 333.6 Synchronizing via Bluetooth 34

7Chapter 4 | Phone 354.1 Making a call 364.2 Conguring the Phone 394.3 Voice Call In-Call Options 414.4 Video Call In-Call Options 43Chapter 5 | Contacts & Messaging 455.1 Using Contacts 465.2 Text Messaging 485.3 Multimedia Messaging Service 495.4 E-mail 515.5 Using SIM Manager 54Chapter 6 | Basic Applications 566.1 Using Calendar 576.2 Using Notes 596.3 Using Tasks 61Chapter 7 | Connecting to the Internet 637.1 Setting up Internet connections 647.2 Using a Wi-Fi Connection 677.3 Using Wireless Manager 697.4 Using Internet Explorer Mobile 70

8Chapter 8 | Transferring Files To and From the device 738.1 Using ActiveSync 748.2 Transferring from Memory Cards 758.3 Using Bluetooth 75Chapter 9 | Other Applications 789.1 Windows Live Messenger 799.2 JETCET PDF5 819.3 Windows Media 829.4 MIDlet Manager 849.5 Phone Prole 849.6 GPS 859.7 Internet Sharing 879.8 Backup/Restore 88 Chapter 10 | Camera 8910.1 Overview 9010.2 Taking a picture 9010.3 Taking a video 9110.4 Settings and Options 9110.5 Pictures and Videos 92Appendix 93A.1 Specications 94A.2 Regulatory Notices 96A.3 PC Requirement to Run ActiveSync 4.5 101

Chapter 1 | Overview

10 Camera Button*: Press to launch the Live Search; press and hold to launch the camera. Volume up: Press to turn up the volume. Volume down: Press to turn down the volume. Ostia Button*: Press to launch the Ostia program; press and hold to launch the Voice Recorder. Power slider: Slide the button to the right and hold to turn on; slide the button to the left to lock, slide the button to the right to turn off the back light. Forward facing camera: Use this camera for video calling. Notication LED: Indicates notication, GPS and Bluetooth status. The blue light ashed when either Bluetooth and GPS is on or when notications exist for messages, missed calls or reminder. Telephone receiver: Speaker for listening to phone calls. Battery/GSM LED: Indicates battery/GSM status. LED displays solid red or green light when the battery is under charge or the battery is fully charged. Green light ashes when GSM/UMTS is on. Touch screen: 2.8-inch TFT LCD touch screen display. START: Press to pull down the Start menu. OK: Press to perform OK/Close. TALK: Press to activate the dialer and to initiate a call. Jog ball: Scroll up, down, left or right to navigate; press to select. END/HOME: Press to end a call or return to the Today screen. Mini-USB Cable Connector. Back cover lock. Microphone. Reset: Using the stylus, press to soft reset the device. Be sure to switch the device into sleep mode before resetting the device, otherwise unsaved data or settings may be lost. 2.5mm Headphone TV out. MicroSD Card Slot. Stylus. Self-Portrait mirror. Main camera. Speaker. Back cover.1.1 IntroductionHardware Overview1112131415161719182023252224261234567891021* These buttons are congurable. To assign new programs/functions, select Start > Settings > Buttons.

111234567 8 91011131215141617182019 222123242526

12AC Charger Stereo HeadsetUSB CableBattery1.2 Introduction cont.What’s in the Box

131.3 Installing SIM Card, Battery and Micro SD CardInstalling the SIM Card and BatteryIf you want to use the telephone features of the device, you must install a valid SIM card.Unlock and remove the battery cover.123

14Place the SIM card with the gold contact facing down.Reinsert the battery. Push the opposite end of the battery until it snaps into place.

15Replace the back cover and lock.NOTE: The device is supplied with a rechargeable Li-ion polymer battery. This battery is supplied completely discharged and should be charged for at least 8 hours before rst use. Please follow the normal turn-off procedure to remove the battery; otherwise unsaved data may be lost.213

171.4 Battery InformationBattery performance depends on many factors, including your wireless service provider’s network conguration, signal strength, the temperature of the environment in which you operate your phone, the features and settings you select and use, items attached to your phone’s connecting ports, and your voice, data, and other program usage patterns.Battery life estimates (approximations subject to network conditions):• 2G talk time: up to 7.5 hours• 3G talk time: up to 5 hours•Standby time: 200 hoursCharge Time (average):•Charge by AC charger: 3 hours•Charge by USB bus: 5 hoursReducing Risk of Fire or Burns•Do not attempt to open, disassemble or service the battery pack.•Do not crush or puncture the battery, short the external contacts or dispose of in re or water.•Do not expose to temperatures above 45oC (113oF) or below -10oC (14oF).•Replace only with the battery pack designated for this product.•Recycle or dispose of used batteries as stipulated by local regulation and in a manner that respects the environment.

18Checking the Battery PowerSelect Start > Settings > System tab > Power.Optimizing Power PerformanceSelect Start > Settings > System tab > Power > Advanced and then adjust settings.Saving the Battery PowerSelect Start > Settings > System tab > Power > Phone and then choose to turn off the backlight while you are having a phone call.Managing a Low BatteryWhen the low-battery warning appears, do the following:1. Turn off Bluetooth and/or WiFi if they are currently enabled.2. Immediately save your current data.3. Plug in or turn off the device.4. Close applications no longer in use.Charging the Battery1. To charge the battery, make sure the battery is sitting in the battery slot correctly.2. Do one of the following: a) Connect the device to the AC charger and plug the AC charger into a power outlet. b) Connect the device to a PC with the USB cable (supplied with the device).NOTE: To charge the device with the USB cable, you must connect the device to a functioning USB port on a PC that is powered on.IMPORTANT: For safety reasons, charging will not occur at temperatures below 0˚C/32˚F or above 40˚C/104˚F.

Chapter 2 | Basic Operations

202.1 Getting StartedTurning the Device On/Offa) When the device is off: push the power slider at the top of the device to the right to turn on the device. b) When the device is turned on: push the power slider to the right to switch the device into sleep mode. You can still receive phone calls and messages when the device is in sleep mode. c) When the device is in sleep mode: push the power slider to the right.d) To power off the device completely, push the power slider to the right and hold for 3 seconds and the system will ask you to conrm before powering off the device.Calibrating the deviceCalibrating the device ensures that the screen will correctly respond to your stylus. When you turn on the device for the rst of time, you will be asked to calibrate the device. If you would like to re-calibrate the device, follow the steps below:1. Select Start > Settings > System tab > Screen.2. Select the Align Screen button and follow the on-screen instructions.2.2 Ostia ButtonPress this button can launch Ostia. Pharos’ award-winning Ostia Smart Navigator software is a full-featured GPS-ready navigation software for Windows Mobile-based. It offers real-time GPS tracking, point A-to-point B routing, automatic voice-guided driving directions, turn-by-turn visual and text directions, automatic re-route, address, intersection, and points of interest location search, multi-stop routing, and more. (Maps are not included.)Status LOstia ButtonSoft-

212.3 Today Screen ComponentsThe Today screen is usually the rst screen that appears when you turn on the device for the rst time each day. It displays a summary of relevant information, shows you the system status and contains a list of shortcuts to programs.The items in the example screen are dened as follows:1Date and time.2Wireless status.3Tap here to show quick reminders about how to do basic tasks.4Owner information.5Unread messages, including text messages, MMS messages, and e-mails.6Active tasks.7Upcoming appointments.8Tap here to sign in to Windows Live.9Tap here to use Live Search. This feature requires an internet connection.10 Device lock status.NOTE: You can also access the Today screen by selecting Today from the Start menu.NOTE: To change the items shown in the Today screen, tap Start > Settings > Today > Items tab.Status BarLocationSoftkeys

22Notication IconsNotication icons appear at the title bar on the screen. The following table lists common status indicators and their meanings.2.4 Start MenuThe Start menu is accessible by selecting the Start button at the top left of the screen and is divided into 3 groups as follow:New e-mail RoamingNew Text (SMS) or Multimedia (MMS) message Bluetooth headset detectedNew Voicemail message Ringer onNew notications 3G availableNew instant message 3G in useVoice call HSPA availableVoice call in progress HSPA in useCalls are being forwarded GPRS availableCall on hold GRPS in useMissed call EDGE availableBattery full EDGE in useLow battery No SIM card installedBattery alert Bluetooth connection in progressExtremely low battery Wi-Fi connection in progressBattery charging Data Connection is activeSignal strength Connection is not activeNo signal Synchronization in progressFlight mode Synchronization errorNo service AlarmToday screenPrimary applicationsRecently used applicationsMore applications and Help information

232.5 Programs, Settings and IconsProgramsGames Two games are installed on the device: Bubble Breaker and Solitaire.ActiveSync Synchronize information between the device and a PC or Exchange Server.aGPS Download satellite data over the internet, speed up the time for locating your current position.Auto Cong Select your mobile operator manually and automatically apply the correct data settings for that operator.Backup Manager Lets you back up and restore your data. See “9.8 Backup/ Restore” for details.Calculator Perform basic calculations such as addition, subtraction, multiplication and division.Camera Take pictures and videos. File Explorer Organize and manage the les and folders on the device.Getting Started Brief introductions and shortcuts of commonly used items.Internet Sharing Use the device as an external modem for a PC, connecting through a USB port or Bluetooth.JETCET PDF 5 View PDFs on the device. Live Search Access Windows Live Search.Messenger Send and receive instant messages with your Windows Live Messenger contacts.MIDlet Manager Install Java applications from local les or a network.Modem Link Share the device connection with a PC or laptop.Notes Take notes on the device.Phone Prole Create and set proles.Pictures & Video Organize and share pictures and videos.Remote Desktop Mobile Create a connection between the device and a Windows Terminal Server.Search Search the device.SIM Manager Lets you manage your SIM card. See “5.5 Using SIM Manager” for details.

24Sim ToolkitA software toolkit that comes with the SIM card. The application name and the functionality of this toolkit depends on your SIM card provider.(This program may not be shown if your operator doesn’t support related services.) Task Manager Manage currently running programs.Tasks Create, edit and synchronize tasks.Unit Converter Convert commonly used measurements.Windows Live Access Windows Live services including Hotmail, Instant Messenger, and Spaces.Windows Media Play music and video.SettingsPersonalButtons Congure button actions.Input Congure input methods.Lock Set a password to unlock the device.Menus Congure the Start menu.Owner Information Enter and edit owner information.Phone Congure the Phone features. Sounds & Notications Congure program and event sounds.Today Congures the Today screen items and theme.SystemAbout Windows Mobile information and device name.Backlight Congure the display backlight and adjust the brightness of display and keypad.Certicates Manage personal and root certicates.Clock & Alarms Set time and alarms.Customer Feedback Send volunteered, non-personal information about how you use Windows Mobile software to Microsoft.Device Information Display information about device system, software and hardware.

25Encryption Encrypt les as they are placed on a storage card.Error Reporting Enable or disables the built-in error reporting system.External GPS Lets you dene the ports used for GPS conguration.Factory Reset Reset all settings to the manufacturer defaults.Managed Programs List programs that have been installed remotely by your system administrator.Memory Check available device memory and memory card information.Power Power management settings.Regional Settings Congure the device’s locale.Remove Programs Allows you to view and remove installed applications.Screen Lets you align the screen. See “Calibrating the device” in Chapter 2 for details.Task Manager Helps you to manage currently running programs.TV-OUT Cong Select your TV output type here.Windows Update Lets you download Windows Mobile updates such as critical security xes.ConnectionsBeam Turn on/off the beam feature.Bluetooth Congure Bluetooth settings. See “8.3 Using Bluetooth” for details.Connections Congure the device’s connections.Domain Enroll Allows you to connect the device with company resources.Network Cards Congure the network adapter. When connecting to Wi-Fi, you can congure wireless networks here as well.Radio Access Type SelectorChoose preferred radio access type. For example, you can choose to use GSM only for saving power.USB Connection You can set your device to synchronize with a PC or function as a card reader when it is connected to your PC through the USB port.Wi-Fi Network Display detailed information for a connected Wi-Fi Network. You can change Wi-Fi Network settings here as well.Wireless Manager Turn on/off wireless, Bluetooth and phone features.

262.6 Input MethodsThe device contains 4 text input methods: Keyboard, Letter Recognizer, Block Recognizer and Transcriber.KeyboardLetter/Block RecognizerTranscriberKeyboard1. Select the keyboard icon in the center of the bottom menu bar to launch the keyboard. If the keyboard is not the selected input method, select the arrow next to the keyboard icon and select Keyboard.2. Select the keys on the on-screen keyboard to enter text or do any of the following: • Select on the on-screen keyboard to enter capital letters.•Select on the on-screen keyboard to enter accented letters.•Select on the on-screen keyboard to enter symbols and numbers.

27Letter RecognizerLetter Recognizer recognizes one letter, number or symbol at a time.•To launch Letter Recognizer, select the input method selector arrow (the upward arrow next to the input method icon) and select Letter Recognizer.•Write uppercase letters in the left recognition area (the ABC box).•Write lowercase letters in the middle recognition area (the abc box).•Write numbers and symbols in the right recognition area (the 123 box).Block RecognizerBlock Recognizer recognizes letters written in one stroke.•To launch Block Recognizer, select the input method selector arrow (the upward arrow next to the input method icon) and select Block Recognizer.•Write lowercase letters in the text recognition area (the abc box on the left).•Write numbers and symbols in the numeric recognition area (the 123 box on the right).•To input symbols, select any recognition area, text or numeric, once and write symbols.NOTE: Select ? in Letter or Block Recognizer to see a demo on how to write recognizable characters.

28TranscriberTranscriber recognizes handwriting in cursive and/or print. It uses the full screen as its recognition area. It interprets the movement of the stylus on the screen as you write.•To launch Transcriber, select the input method selector arrow (the up arrow next to the input method icon) and select Transcriber. •Write anywhere on the screen.NOTE: The Transcriber comes with detailed help pages. Select if you need further assistance.

Chapter 3 | Synchronizing Information

30ActiveSync and Windows Mobile Device Center (WMDC) synchronize information on the device with information on your PC or Exchange server. ActiveSync works on computers that have the Windows XP operating systems while WMDC works on computers that have Windows Vista.Specically, you can use ActiveSync or WMDC to:•Synchronize Outlook e-mail, contacts, calendar or tasks on your phone with your PC.•Synchronize pictures, video, and music between the device and your PC.•Synchronize Outlook e-mail, contacts, calendar appointments and tasks on your phone directly with Exchange Server.•Copy les between your phone and your PC without synchronizing.•Select which types of information are synchronized and specify how much information is synchronized. For example, you can choose how many weeks of past calendar appointments to synchronize.3.1 Installing and Setting up ActiveSyncIMPORTANT: Be sure to install ActiveSync on the PC before connecting the device to it.1. Install ActiveSync on your PC, as described on the Windows Mobile™ Getting Started Disc. After setup completes, the Synchronization Setup Wizard automatically starts when you connect the device to the PC (through a USB cable or Bluetooth).2. Follow the instructions on the screen to complete the wizard. In the Sync Setup Wizard, you can:•Create a synchronization relationship between your PC and the device.•Congure an Exchange Server connection to synchronize directly with Exchange Server. To synchronize the device with Exchange Server, obtain the name of the Exchange Server , your user name, password and domain name from your administrator before completing the wizard.•Choose information types to synchronize.3. Once synchronization completes, you can disconnect your phone from your PC.

313.2 Installing and Setting up WMDCThe Windows Vista operating system includes the basic WMDC application partially installed, you can fully install WMDC on your computer from the Getting Started Disc.1. Follow the instruction on the Windows Mobile™ Getting Started Disc to install WMDC on your PC. 2. Connect the device to your PC, WMDC will start automatically.3. Do either of the following on the home screen of WMDC:•Click Set up your device to select items that want to synchronize. WMDC synchronizes the device automatically when you nish the set up.•Click Connect without setting up your device to transfer les, check updates or explore the device without synchronizing Outlook information.3.3 Synchronizing InformationStarting and Stopping Synchronization Manually1. On the device, select Start > Programs > ActiveSync.2. To start synchronization, select Sync.3. To stop synchronizing, select Stop.IMPORTANT: You can start and stop synchronization only if the device already has a sync relationship with a PC or Exchange Server. Some Anti-Virus software may conict with ActiveSync.Changing Default Sync SettingsActiveSync and WMDC synchronize a limited amount of information by default to save storage space on your phone. You can change the amount of information that is synchronized by performing the following steps.1. On the Today screen, click Start > Programs > ActiveSync.2. Select Menu > Options.3. Do one or more of the following:

32•Select the checkbox for the items you want to synchronize. If you cannot select a checkbox, you might have to clear the checkbox for the same information type elsewhere in the list.•Clear the checkbox for any items you want to exclude.•To customize synchronization of a computer, select the computer name and then click Settings. •To customize synchronization of particular information, select the information type and then click Settings. •To stop synchronizing with one computer completely, select the computer name and click Delete. IMPORTANT: Outlook e-mail can only be synchronized to one Outlook prole on the PC or one Exchange Server account.3.4 Changing Settings for an Information TypeIMPORTANT: Before changing settings for an information type on the device, disconnect the device from your PC.1. Select Start > Programs > ActiveSync > Menu > Options.2. Select one of the information types (e.g. E-mail, Tasks or Calendar items).3. Do one of the following:•To view or change settings for an information type (when available), select Settings.• To view or change settings for a computer or Exchange Server, select Settings.4. Change the amount of information to be synchronized or other settings.5. Select OK (or Finish in the Exchange Server settings wizard).

333.5 Synchronizing with Exchange ServerTo set up the device to synchronize directly with Exchange Server, you will need to get the name of the server and the server domain name from your service provider or system administrator. You must also know your Exchange user name and password.1. On the device screen, select Start > Programs > ActiveSync and then select set up your device to sync with it.2. Enter your Email address and then tap Next.3. Enter your user name, password and domain name, then select Next. If you want the device to save your password so that you will not need to enter it on each connection, select the Save password checkbox.4. In Server address, enter the name of the server running Exchange Server, then select Next. Select This server requires an encrypted (SSL) connection if you want to receive personal information more securely. However, if you select this option and your ISP does not support an SSL connection, you will be unable to receive e-mail.5. Select the checkboxes for the types of information items that you want to synchronize with Exchange Server.6. To change available synchronization settings, select the type of information and then select Settings.7. To change the rules for resolving synchronization conicts, select Menu > Advanced.8. Tap Finish.NOTE: You can also use ActiveSync or WMDC to set up the device to synchronize remotely with the Exchange Server. The set up wizard is started when you connect the device to your PC after installing ActiveSync or WMDC on the PC.

343.6 Synchronizing via BluetoothConnecting to a PC Using Bluetooth1. Your PC must be equipped with a suitable Bluetooth radio. 2. Follow the instructions in ActiveSync Help on the PC for conguring Bluetooth on your PC to support ActiveSync.3. On the device, select Start > Programs > ActiveSync.4. Select Menu > Connect via Bluetooth. Ensure that the device and PC are within close range.5. If this is the rst time you have connected to this PC via Bluetooth, you must complete the Bluetooth wizard on the phone and set up a Bluetooth partnership with the PC before synchronizing. This process will typically involve exchanging a pass-key between the device and the PC.6. Select Sync.7. When nished, select Menu > Disconnect Bluetooth.NOTE: To preserve battery power, turn off Bluetooth after the synchronization is completed.

Chapter 4 | Phone

364.1 Making a callThe Phone ScreenFrom the phone screen, you can see dial records and Contacts and choose to make a video or voice call. To access the Phone Screen, do any of the following:•Press the TALK hardware button.•Select Phone on the Today screen.•Select Start > Phone.NOTE: The backlight of your device is set to be turned off in 10 seconds when you are having a phone call. Press END/HOME to end the call directly or press any other key to turn on the backlight.To cancel this function, press Start > Setting > System tab > Power > Phone.Smart Dial AreaBackspaceVoice CallCall HistoryVideo Call

37Making a Call by Using the Phone Keypad1. On the Phone screen, select Keypad if the keypad is not displayed.2. Enter the number to dial using the keypad.3. Select matching contacts that come up in the smart dial area to dial that number and/or contact or nish entering the number and select to make a voice call or to make a video call.Making a Call from Call History1. On the Phone screen, select to display call history full screen.2. Scroll to the desired number or contact. Press TALK to make a voice call; selectMenu > Video call to make a video call. Making a Call from ContactsDo either of the following to make a call from Contacts:•Voice Call. On the Phone Screen, select Hide Keypad to show all Contacts on the smart dial area. Tap on the desired contact in the list and then tap on the number you want to dial.•Video Call. Select Contacts on the Today screen, scroll to the desired contact, select Menu > Video call.Making a Call from Speed DialYou can create speed dial entries for frequently called numbers or frequently accessed items. Speed Dial allows you to dial a number by pressing a single key. For example, if you assign location 2 to a contact in Speed Dial, you can simply press and hold 2 on the Phone Keypad to dial the contact’s number. Speed dials can be created only for numbers that are stored in Contacts.On the Phone screen, do either of the following:•Select Menu > Speed Dial. Scroll to the desired contact and press TALK to make a voice call; select Menu > Video call to make a video call.•Select Hide Keypad to show speed dial entries on the smart dial area. Scroll to

38 the number and then press TALK.To create a speed dial entry for a contact1. Select Contacts on the Today screen.2. Select the contact for whom to create a speed dial.3. Scroll to the phone number (if there is more than one) for which to create a speed dial.4. Select Menu > Add to Speed Dial.5. In Location, select the speed dial number to use.6. Select OK when nished.NOTE: The rst speed dial location is generally reserved for your voice mail. Speed Dial uses the next available location by default. If you want to place a number in a location that is already used, the new number replaces the existing number.To delete a speed dial entry1. On the Phone screen, select Hide Keypad.2. Select the entry that you want to delete.3. Select Delete.Receiving/Rejecting a CallWhen you receive a phone call, you have the option to answer it or ignore it.•To accept an incoming call, select Answer on the screen or press TALK to accept an incoming call.•To ignore a call, select Ignore on the screen or press END/HOME.NOTE: To adjust the earpiece volume during a call, press the volume up/down button on the phone side panel. Adjusting the volume at any other time to change sound levels for the phone ringer, system notications and music. You can mute the volume of incoming calls by pressing and holding the volume down button.

394.2 Configuring the PhoneYour wireless service provider may provide useful services such as Call Barring, Caller ID, Call Forwarding, Call Waiting, Voice Mail and Text Messages and Fixed Dialing. You can view and edit these settings from the Network. Please make sure you have inserted a valid SIM card to the device before changing the following settings.Activating PIN SecurityMost Subscriber Identity Module (SIM) cards are preset with a personal identication number (PIN) that is provided by your wireless service provider. When PIN Security is activated, you need to enter the PIN whenever you use your phone.1. Select Start > Settings > Phone > Require PIN when phone is used.2. Enter the preset PIN provided by your wireless service provider.3. Select Enter.NOTE: If your PIN is entered incorrectly three times, the SIM card will be blocked. If this happens, you can unblock it with the PIN Unblocking Key (PUK) obtained from your wireless service provider.Changing the Ring Type and Ring ToneYou can choose how to be notied for incoming calls.1. Select Start > Settings > Phone.2. In the Ring type list, select the desired option. 3. In the Ring tone list, select the sound you want to use.4. Select OK.Changing the Ringer VolumeYou can press volume up and down on the left side of the device to change the ringer volume or do the following:1. Select the volume icon in the status bar on the screen.2. Do one of the following:•Move the slider to the desired volume level. Select On, Vibrate, or Off to quickly change both the ringer and system volume settings.

40Blocking Incoming or Outgoing Calls1. Select Start > Settings > Phone > Services tab.2. Select Call Barring > Get Settings.3. Choose the calls you want to block, and select OK. •Block incoming calls: All calls, When roaming, Off. •Block outgoing calls: All calls, International, International except to home country, Off.Displaying Caller IDYou can provide a way for people to see your number when you are calling them.1. Select Start > Settings > Phone > Services tab.2. Select Caller ID > Get Settings.3. Select Everyone, No one or Only to contact.Call WaitingWhen you are in another call, you will be notied of an incoming call if this option is selected.1. Select Start > Settings > Phone > Services tab > Call Waiting > Get Settings.2. Select Notify me or Do not notify me, then select OK. NOTE: Another way of changing phone settings is to select Menu > Options > Services from the Phone keypad.Time UpdateYou can have the device update the time zone and clock automatically when it connects to a wireless service provider’s network. (Not all service providers support this function, please contact your service provider for details.)•Select Start > Settings > Phone > Time Update tab, then select Update time zone and clock automatically (NITZ).

414.3 Voice Call In-Call OptionsThe device provides various options for managing multiple calls at the same time. You are notied when you have another incoming call, and you have the choice of ignoring or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. HoldEnd CallSpeaker On/Off Mute/UnmuteNoteContactsAnswering a Second Call1. Select Answer to take the second call and put the rst call on hold.2. To switch between two calls, tap Menu > Swap.3. To end the second call and return to the rst call, select on the screen or press the END/HOME hardware button.

42Conference Call1. Either put a call on hold and dial a second number or accept a second incoming call when you have one in progress. (To dial a second number, tap on the screen to put the rst phone on hold, then tap or Keypad to dial a second number).2. Select Menu > Conference.3. To end the second call and return to the rst call, select on the screen or press END/HOME.NOTE: If the conference connection is successful, the word “conference” will appear at the top of the screen. Not all service providers support conference calling. Contact your service provider for details.Muting the MicrophoneThe device’s microphone can be turned off during a call. If you turn off the microphone, the caller cannot hear you. However, you can still hear the caller. • Select Mute during a call to turn the microphone off. • Select Unmute to turn the microphone on.

434.4 Video Call In-Call OptionsIMPORTANT: Not all service provider support video calling, please contact your service provider for details.When in a video call, you can see yourself and the person you are talking to showing on the screen at the same time. During the call, you can choose to turn off the camera or switch between the forward facing camera and the main camera. BrightnessEnd CallCamera On/Off Mute/UnmuteSwitch CameraOther personYouSwitch WindowChanging Settings•Turn off camera The left window plays the local captured video from the camera on the device, to turn off this camera, select on the screen. You can still see the captured video from the other side.•Switch camera To switch between the forward facing or main cameras, select on the screen.

44•Switch Window To switch the size of preview window and remote window, select on the screen.•Brightness Select on the screen to adjust the brightness; there are four levels for brightness.•Night Mode. During a call, select Menu > Night Mode On/Off to switch between night mode and normal mode.•Hands-free. If you use a Bluetooth headset, select Menu > Turn Hands-free On/Off to switch between speaker and headset.Video Call OptionsYou can show a still image while turning off the camera and assign a ringtone for video call.1. Select Menu > Video Call Options on the Phone screen.2. In Default video setting, select the image you want to display when you turn off the camera.3. If you select User dene, tap to view available pictures and then select one.4. Select the camera that you prefer to use.

Chapter 5 | Contacts & Messaging

465.1 Using ContactsIn Contacts, you can store phone numbers, e-mail addresses, home addresses and any other information that relates to a contact (such as a birthday or an anniversary date). You can also add a picture or assign a specic ring tone to a contact.You can quickly communicate with people using the contact list. Click a contact in the list for a summary of contact information and available communication methods. This summary page will allow you to call or send a message, depending on the information available for that contact.If you use Outlook on your PC, you can synchronize contacts between your phone and PC.Creating a New Contact1. Do any of the following: •Select Start > Contacts > New. •Select Contacts on the Today screen.2. Select Outlook Contact.3. Enter information for the new contact.4. Select OK.NOTE: If someone who isn’t in your list of contacts calls you or sends you a message, you can create a contact from Call History or from the message by selecting Menu > Save to Contacts.To save an existing contact to your SIM card, open the contact, select Menu > Save to SIM.

47Viewing and Editing Contact Information1. Select Start > Contacts or select Contacts on the Today screen.2. Select the contact whose information you want to view.3. To edit the information, select Menu > Edit.4. Do any of the following:•Select Picture and select a picture you want to add. This can be an existing picture, or you can take a new picture using the camera program.•Select Ring Tone and select the ring tone you want to use for this contact. This will allow you to know who is calling without having to look at the screen.•Select Categories and select one of the options or create a new category.5. When nished making changes, select OK.Sending an E-mail to a Contact1. Select Start > Contacts on the Today screen.2. Select the contact from the list.3. Select the e-mail account to use.4. Enter a subject, compose your message, then select Send.Sending a Text Message to a Contact1. Select Start > Contacts or select Contacts on the Today screen.2. Select the contact you want to send a text message to, then select Send text message.3. Compose your message then press TALK.Creating a SIM ContactContacts can be created and stored on a subscriber identity module (SIM). If you move the SIM to another phone, your SIM contacts are moved as well.1. Select Start > Contacts > New. Alternatively, select Contacts on the Today screen and then select New.2. Select SIM Contact.3. Enter the name and phone number of the contact and then select OK.

485.2 Text MessagingCreating a Text Message1. Select Start > Messaging > Text Messages.2. Select Menu > New.3. Enter the recipient’s text message number in the To eld. Insert a semicolon (;) between multiple text message numbers.4. Enter your message and select Send. Depending on phone signal, text messages will be sent immediately.NOTE: You can quickly enter text message numbers from your contact cards. In the To eld, tap To and select a recipient from the list. Then select the recipient’s phone number.You can request a delivery notication for the text message. Select Menu > Message Options > Request message delivery notication.Using Preset Text MessagesYou can quickly insert preset or frequently used messages into your text message. While composing a message, select Menu > My Text and then add a preset message to insert.Reading a Text Message1. Select Start > Messaging > Text Messages.2. Select Inbox , then select Inbox under Text Messages.3. In the message list, select the text message you want to read.

495.3 Multimedia Messaging ServiceCreating and sending Multimedia Message Service (MMS) messages to your friends and family is fun and easy. You can include text as well as existing or newly captured photos, video clips or audio before sending your MMS.MMS messages can be broken up into various slides, where each of the slides can be any combination of audio or video clip, an image and/or text.Composing a MMS Message1. Select Start > Messaging > MMS.2. Select Menu > New.3. Enter the recipient addresses in the To , Cc and/or Bcc elds. Insert a semicolon between multiple addresses.4. In Subject, enter a subject.5. To create a slide, do any combination of the following:•Select Insert Picture/Video and select a picture or video clip (or snap or record a new one).•Select Insert Audio and select an audio clip.•Select Insert Text and enter a message.•Select Menu > Insert > Sound Recorder, then select the RECORD button ( ) to record a new audio clip. Select STOP ( ) button to stop recording.•Select Menu > Options > Background Color, select a background color for the slide.6. Select Send.NOTE: After the rst slide is lled with content, you can select Menu > Select Slides > Insert to add another slide to your MMS message.

50Previewing a MMS MessageYou can preview an MMS message before sending it.1. To preview your MMS message after composing it but before sending it, select Menu > Preview.2. Select Done or Replay to dismiss or repeat the preview.Reading a MMS Message1. Select Start > Messaging.2. Make sure the folder drop-down list says Inbox . If it doesn’t, select the folder drop-down list and select Inbox under MMS.3. In the message list, select the MMS message you want to read.Conguring MMS SettingsMMS settings are typically a combination of user preferences and network operator settings. You will need to consult your network operator for details on the MMS settings specic to the network.1. Select Start > Messaging > MMS.2. Select Menu > MMS Settings.3. Select the type of options to change.4. Select OK.

515.4 E-mailSetting up an E-mail AccountBefore you set up your Internet e-mail account, please ensure that you have the necessary information from your e-mail service provider. The kind of information you’ll need to have ready is tabulated below. Use this as a check-list before proceeding with the account set-up.Setting DescriptionUser name Usually the rst part of your e-mail address, which appears before the “at” sign (@). For some e-mail service providers, the full e-mail address is used as the user name.Password Choose a strong password. You will have the option to save your password, so that you do not need to enter it each time you connect to your e-mail server.Domain The domain name. This may not always be required.Server type The type of e-mail server that hosts your mailbox (POP3 or IMAP4).Account name A friendly name for this account (e.g. “My Webmail”). You must use a different name for each account that you set up.Network The type of network your e-mail server connects to (e.g. Work or The Internet).Incoming mail server The name of your e-mail server (POP3 or IMAP4).Require SSL connection Select this to ensure you always receive e-mail for this account using an SSL connection. This enables you to receive personal information more securely. Please note that if you select this and your ISP does not support an SSL connection, you will not be able to connect to receive e-mail.Outgoing mail server The name of your outgoing e-mail server (SMTP).Outgoing server requires authenticationYour outgoing e-mail server (SMTP) may require authentication. Note: unless otherwise specied in the next section, your previously given user name and password will be used for authenticating against the outgoing e-mail server.Outgoing server settings Your outgoing e-mail server may require different authentication settings than your incoming e-mail server.Use different user name for outgoing server A checkbox that lets you enter separate settings for your outgoing e-mail server.User name Your user name for the outgoing e-mail server.

52Password Your password for the outgoing e-mail server.Domain The domain name of the outgoing e-mail server.Require SSL connection (Outgoing mail server only)A connection that enables you to send personal information more securely. Note that if you select this and your ISP does not support an SSL connection, you will not be able to send e-mail.Now you are ready to set up your account:1. Select Start > Messaging > Setup E-mail.2. Enter your e-mail address and password. Select Save password if you want, or you can enter the password each time you send and receive e-mails. Then select Next.3. Select Next. If the device is connected to the internet, the Auto Setup feature will attempt to retrieve settings for this e-mail account, saving you the effort of typing in all the required settings. If no matching settings are found (or if no internet connection exists), then you will need to enter each setting manually.4. Enter the name you want to appear when you send messages, then select Next.5. In Automatic Send/Receive, select a frequency for sending/receiving e-mails. Please note that data charges will probably be incurred if you send and receive e-mail outside of WiFi or Bluetooth range. Select Review all download settings to change your e-mail settings; otherwise, select Finish to start downloading messages.NOTE: To change options for an e-mail account, select Start > Messaging > Menu > Options and then select the type of options to change.IMPORTANT: If you save your password and then lose your phone, someone nding your phone might be able to gain access to your e-mail.

53Composing an E-mail Message1. Select Start > Messaging.2. Select an e-mail account to use.3. Select Menu > New. This will bring up a new e-mail form.4. Enter recipient e-mail addresses in the To , Cc and/or Bcc elds as necessary. Insert a semicolon (;) between multiple addresses.5. In the Subject eld, type in a subject.6. Enter a message.7. Select Send. E-mail messages are stored in Outbox and are sent to recipients the next time you synchronize or connect to your e-mail server and send and receive mail.NOTE: You can quickly enter e-mail addresses from your contact cards. In the To eld, press ENTER and select a recipient from the list. Then, select the recipient’s e-mail address.To change message settings such as its priority, select Menu > Message Option in the message you are editing. Select the type of options to change and then select OK.Reading an E-mail Message1. Select Start > Messaging, select an e-mail account.2. Make sure the folder drop-down menu says Inbox . If it doesn’t, select the drop-down menu and select Inbox under this e-mail account.3. In the e-mail list, select the e-mail message you want to read.NOTE: Unread e-mails are normally listed in the Messaging item on the Today screen. You can access unread e-mails directly by selecting the Messaging item on the Today screen.

545.5 Using SIM ManagerThe SIM Manager allows you to manage the phonebook in your SIM card. Using the SIM Manager, you can easily transfer phonebook entries from your SIM card to Contacts.Adding a Phonebook Entry to the SIM CardPlease note that SIM card contacts can store far less information than Outlook contacts. There is a restriction on the length of the contact name, you can only have one number per contact.1. Select Start > Programs > SIM Manager. 2. Select New and enter the name and phone number you want to add.3. Select the Add button.Deleting a Phonebook Entry from the SIM Card1. Select Start > Programs > SIM Manager. 2. Select an entry you want to delete and tap Menu > Delete.3. Select Yes to conrm that you want to delete the contact.Saving Phonebook Entries to Contacts1. Select Start > Programs > SIM Manager. 2. Select the entries you want to save to Contacts by checking the checkboxes in front. Select Menu > Check All if you want to select all entries.3. Select Menu > Save to Contacts.4. Select OK to close the notication dialog box.

55Saving Contacts to SIM Card1. Select Start > Programs > SIM Manager. 2. Select Menu > Contacts to SIM.3. Select the phone type(s) from the Outlook Contacts and then select OK.4. Select the contacts you want to save to SIM card by checking the checkboxes in front. Select Menu > Check All if you want to select all contacts.5. Select Save.NOTE: One SIM card entry can only store one phone number, if you select more than one phone type from the Outlook Contacts (e.g. Work tel and Mobile tel), SIM Manager will create different entries separately for the same contact and mark the entries with a phone type abbreviation (e.g. Chris/WT and Chris/MT).

Chapter 6 | Basic Applications

576.1 Using CalendarUse the Calendar application to schedule appointments, including meetings and other events. Your appointments for the day can be displayed on the Today screen. If you use Outlook on your PC, you can synchronize appointments between the device and PC. You can also set Calendar to remind you of appointments with an audible alarm or ashing light.You can look at your appointments in several different views (Day, Week, Month, Year and Agenda). To see detailed appointment information in any view, select the appointment.Making an Appointment1. Select Start > Calendar. Alternatively, you can select the appointment item on the Today Screen.2. Select Menu > New Appointment.3. Enter information about the appointment.4. Select OK to save the appointment.NOTE: If you make this appointment as an all-day event, it will not occupy blocks of time in Calendar; instead, it will appear in banners at the top of the Calendar view. You can assign a category to an appointment or create a new category for it.Deleting an Appointment1. Select Start > Calendar.2. In Agenda/Day/Week view, select the appointment to delete.3. Select Menu > Delete Appointment.4. If the appointment is recurring, select All to delete the series, or select One to delete only the current occurrence.NOTE: When you delete an appointment in Calendar on your phone, it is also deleted on your PC the next time you synchronize. If the appointment has not been synchronized with a PC, it will be deleted only from the phone.

58Changing Calendar ViewsYou can look at your appointments in Agenda, Day, Week, Month or Year view. To see detailed appointment information in any view, select the appointment. To see a list of available actions for an appointment, select and hold the appointment.1. Select Start > Calendar.2. Select Menu > View, then select the view you want. You can view your calendar in the following layouts: •Today’s agenda: your current day’s activities at a glance. Upcoming appoints appear in bold text; past appointments are dimmed.•Appointment for the week: your schedule for the whole week.•Agenda for a specic date: your schedule for a single day in a day-planner layout. Free and busy period are shown in time slots of 1/2 hour or 1 hour.•Appointment for the month: your free and booked days for a month. indicates there is a morning appointment; indicates there is a afternoon appointment; indicates there are both morning and afternoon appointments; indicates there is a all-day event.NOTE: In Month view, a date will appear in red when the Holiday category is assigned to any appointment for that day.You can also cycle through the views by selecting Agenda, Day, Week, Month or Year on the menu bar.You can quickly see your appointments for the current day in Agenda view, Select Menu > Go to Today.Changing the Default Calendar Settings1. Select Start > Calendar.2. Select Menu > Tools > Options and then do one of the owing: •In Start in, select the calendar view you prefer. •To specify the rst day of the week, in 1st day of week, select Sunday or Monday. •To specify the number of days you want to appear in a week, in Week view, select 5-day week, 6-day week, or 7-day week.3. Select OK to save settings.

596.2 Using NotesThe Notes program helps you to quickly capture thoughts, questions, reminders, to-do lists and meeting notes. You can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability and send notes to others.Your notes and recordings are displayed in the note list. If you have a long list, select the sort list (labeled Name by default) and select the option you want. To open a note or play a recording, select it. To see a list of available actions for a note or recording, select and hold the note or recording.Creating a Note1. Select Start > Programs > Notes.2. Select New and enter text.3. Select OK to save your note.Setting the Default Input Mode and Template for Notes1. Select Start > Programs > Notes.2. Select Menu > Options.3. Select one of the follo58u,4wing modes in Default mode: •Select Writing if you prefer your notes to be handwritten.•Select Typing if you would like your notes to be typed.4. Select a template from Default template.5. Select OK to save your settings.NOTE: You can change the input mode when editing a note. Select Menu and then select Draw to switch to a different mode. A check mark next to Draw indicates that it is in writing mode.

60Creating a Stand-alone Voice Recording1. Select Start > Programs > Notes.2. If the recording toolbar is not shown, select Menu > View Recording Toolbar.3. Select the RECORD button on the recording toolbar and speak into the microphone to start a voice recording.4. Select the STOP button on the recording toolbar when nished. The recording will appear in the notes list, and you can review it by selecting it.5. Select OK to return to the notes list.NOTE: Except creating a stand-alone voice recording, you can also add a voice recording to a note.Editing a Handwritten NoteTwo important options for editing a handwritten note are the Undo/Redo Ink items and the select All and Clear items:・Undo/Redo Ink・Select All/Clear Deleting a Note1. Select Start > Programs > Notes.2. Select and hold the note, then select the Delete command.3. Select Yes to conrm deleting the selected note.

616.3 Using TasksUse Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set reminders for your tasks and you can organize them by using categories.Your tasks are displayed in a task list. Overdue tasks are displayed in red.If you use Outlook on your PC, you can synchronize tasks between the device and PC so that tasks you create or update on your PC will also be updated on the device and vice versa.NOTE: To quickly see the number of active tasks you have, select Start > Today. If the Tasks item is enabled, you will see the number of active tasks listed on the Today screen.To enable Tasks on the Today screen, select Start > Settings > Today > Items tab.Creating a Task1. Select Start > Programs > Tasks.2. Do one of the following:•Select the box labeled select here to add a new task, enter the task name and press the jog ball.•Select Menu > New Task and then enter details about the new task.NOTE: You can synchronize information on your phone with your PC to keep your task list up to date in both locations.If you create a new task with a reminder on your PC and then synchronize tasks with your phone, the reminder will play at the time it was set on your PC.You can assign a category to a task or create a new category for it. When editing a task, select Categories > New and then give the new category a name. Select Done and the new category will appear in the list.

62Deleting a Task1. Select Start > Programs > Tasks.2. Select the task, select Menu > Delete Task.Changing a Task1. Select Start > Programs > Tasks.2. Select an existing task and select Edit.3. When nished making changes, select OK.Sorting/Filtering Your Tasks1. Select Start > Programs > Tasks.2. Do one of the following:•To sort the tasks, select Menu > Sort by, then select a sorting option (e.g. Status or Due Date).•To lter the tasks by category, select Menu > Filter, then select a category to display.Setting Tasks Options1. Select Start > Programs > Tasks.2. Select Menu > Options, there are 3 options you can set:•Set reminders for new items.•Show start and due dates.•Show Tasks entry bar.

Chapter 7 | Connecting to the Internet

647.1 Setting up Internet connectionsThe device’s powerful networking capabilities allow you to access the Internet or your corporate network at work through telephony or wireless connections. Specically, you can congure the device to establish a connection via GPRS/EDGE/HSPA, Dial-up and Wi-Fi, or set up a VPN or network Proxy.With an active connection on the device, you can browse the Web, download e-mails or use Windows Live Messenger. Check with your service provider to see if a connection has already been set up for you and if over-the-air conguration is supported.If you need to manually set up a connection, it is important that you obtain the following information from your Internet Service Provider (ISP) or the company whose intranet you are trying to access:•User name• Password• Access point name (required for GPRS connection)• Domain name (required for accessing a corporate network or an intranet)Creating a GPRS/EDGE/HSPA ConnectionEvery network connection is different. You should gather all of the relevant information or network settings you need before starting this process.1. Select Start > Settings > Connections tab > Connections.2. Select Add a new modem connection.3. Enter a name for the connection.4. In select a modem, select Cellular Line (GPRS) > Next to continue.

655. In Access point name, enter the access point name and then select Next. Access point name will be provided by your carrier.6. In User name, enter your user name for the GPRS network, if required. 7. In Password, enter a password, if required. This information is also provided by your network operator. 8. If required, select Advanced and enter information related to Servers and TCP/IP.9. Select Finish. NOTE: The device cannot connect to a PC through ActiveSync while connecting to the Internet using GPRS/EDGE/HSPA.Creating a Dial-up ConnectionNot all service providers support dial-up connection, please consult with your service provider. You will need a phone number to connect to the Internet, a user name and a password in order to continue the following steps.1. Select Start > Settings > Connection tab > Connections.2. Under My ISP, select Add a new modem connection.3. In Enter a name for the connection, enter a name for the connection.4. In Select a modem, select Cellular Line > Next.

665. Enter the phone number provided by your service provider, select Next.6. Enter the user name and password, tap Finish.Creating a Proxy ConnectionProxy connection lets you access the Internet through an intermediary IP address. You should gather all of the relevant information or network settings you need before starting this process.1. Select Start > Settings > Connections tab > Connections.2. Select Set up my proxy server.3. Check the checkbox in front of This network connects to the Internet.4. Check the checkbox in front of This network uses a proxy server to connect to the Internet.5. Under Proxy server, enter the proxy server name.6. If the proxy server uses a different port or requires a username and password, select Advanced, select the proxy type to change its settings and then enter username, password and/or port number in the proper elds.7. Select OK.Starting a Connection ManuallyYou can start a connection manually if there is more than one connection type set on the device.1. Select Start > Settings > Connections tab > Connections.2. Select Manage existing connections.3. Select and hold the desired connection type, then tap Connect.Deleting a Connection1. Select Start > Settings > Connections tab > Connections.2. Select Manage existing connections in the My ISP section.3. Select and hold on the connection you want to delete, then select the Delete command.

677.2 Using a Wi-Fi ConnectionWi-Fi is wireless radio technology that allows you to access e-mail, the internet and broadband multimedia content. When the device encounters a hot-spot (a place where you can access Wi-Fi networks), it can then connect to that network wirelessly. While some hotspots are free, the most robust public Wi-Fi networks are provided by private internet service providers (ISPs) or wireless carriers, and using these networks will typically require payment of a connection fee.NOTE: You may need to consult your ISP before running this utility.IMPORTANT: The Wi-Fi connection is disabled when the device is synchronizing with a PC.Connecting to a Wi-Fi Network1. Select Start > Settings > Connections tab > Wireless Manager.2. Select the third button to turn on Wi-Fi connection (unless it already says “On”).3. Follow the prompts to nish related settings. When a Wi-Fi connection is activated, the icon shows at the top of the screen.4. If you want to switch to another Wi-Fi network, select Start > Settings > Connections tab, then select Wi-Fi. (The program “Network Cards” will change its name into “Wi-Fi” if the Wi-Fi network is connected successfully.)5. On the Wireless tab, you can see the connected network and other available wireless networks.6. Select a wireless network then select Connect.7. Follow the prompts to nish related settings.8. Select OK to close the window.

68Checking the Wi-Fi ConnectionYou can check the current wireless connection status after connecting to a Wi-Fi Network.1. Select Start > Settings > Connections tab > WiFi Network.2. Information such as the SSID (the Wi-Fi network name) and the wireless network signal strength will be shown in a summary screen.3. Select other tabs to check IP information, change power saving settings or review other advanced settings.4. Select OK.Conguring Wi-Fi SettingsYou can congure wireless networks on the device by adding new Wi-Fi connections and editing currently available networks.IMPORTANT: The screen for wireless networks conguration can only be accessed after Wi-Fi is turned on.Creating a Wireless ConnectionSome Wi-Fi networks are hidden. You might sometimes need to enter the network settings manually. To set up a new Wi-Fi network connection, you will rst need to have your home router settings or information from your administrator about joining the corporate Wi-Fi network.1. After turning on Wi-Fi on the device, do either of the following:• Open Wireless Manager, select Menu > Wi-Fi Settings.• Select Start > Settings > Connections tab > Network Cards.2. In Wireless tab, select Add New.3. Enter the Network name, select a Network type, then select Next. If you want to connect to another device instead of a network through an access point, select This is a device-to-device (ad-hoc) connection.4. Enter required information, then select Next.

695. Select Use IEEE 802.1 x network access control to use EAP (Extensible Authentication Protocol). Select EAP type: PEAP or Smart Card or Certicate.6. Select Finish.Editing a Wireless Network1. Open Wireless Manager and then select Menu > Wi-Fi Settings.2. In Wireless tab, you can see currently available wireless networks. Select and hold the network you want to edit, then select Edit on the pop-up menu.3. Change the settings of this wireless network as required.4. Select Finish to save your settings.7.3 Using Wireless ManagerYou can use Wireless Manager to activate and de-activate the various wireless features on the device, including cellular phone, Bluetooth and Wi-Fi. Wireless Manager is useful when you need to reduce battery consumption or if you use the device on an aircraft.Opening Wireless ManagerTo open the Wireless Manager, do one of the following: • Select the signal strength icon ( ) at the top of the screen, then select Wireless Manager. • Select Start > Settings > Connections tab > Wireless Manager.

70Enabling and Disabling a Wireless FeatureThe Wireless Manager allows you to turn connections on and off quickly and easily.1. Phone: turn the phone on and off.2. Bluetooth: turn Bluetooth on and off.3. Wi: turn wi on and off.4. Flight mode: turn all off.7.4 Using Internet Explorer MobileInternet Explorer Mobile is a full-featured Web browser, optimized for use on your phone. You can use Internet Explorer Mobile to browse the Internet once you have set up your Internet connection (if you haven’t done so, please read the previous sections before continuing).Browsing the Internet1. To browse the Internet you must have a valid connection established.2. Select Start > Internet Explorer.3. Do either of the following: • Enter the address in the address bar, select . • Select Favorites, then select a Web Page from the list.Adding a Web Page to the Favorite List1. Select Start > Internet Explorer.2. To go to the page you want to add, select Menu > Add to Favorites.3. Verify the name and address (URL).4. In Create in, select a folder for this favorite.5. Select Add.NOTE: A quick way to add favorites to your phone is to synchronize with your PC using ActiveSync. For more information, see ActiveSync Help on your PC.

71Deleting a Favorite1. Select Start > Internet Explorer.2. Select Favorites.3. On the Add / Delete tab, select the favorite to delete.4. Select the Delete button.5. Select Yes to conrm the deletion.Changing the Size of Text on Web Pages1. Select Start > Internet Explorer.2. Select Menu > View > Zoom Level, then select the size you want.Showing or Hiding Pictures on Web Pages1. Select Start > Internet Explorer.2. Select Menu > View > Show Pictures. Images on the Web pages that you visit will be downloaded. Un-check this item if you do not want internet Explorer to show pictures.Changing Web Page Display Options1. Select Start > Internet Explorer.2. Select Menu > View, then select one of the following: • One Column: Arranges the content into one column that is as wide as the screen. This means that you will rarely have to scroll horizontally. • Fit To Screen: Maintains a layout similar to what you see on a desktop computer, but makes items smaller and arranges the content so that you can see most of it without having to scroll horizontally. • Desktop. Keeps the same layout and size as on a desktop computer, which will require both horizontal and vertical scrolling.

72Send a Link by E-mail1. Select Start > Internet Explorer.2. Go to the page you want to send.3. Select Menu > Tools > Send Link.4. The Messaging accounts list will appear. Select an account.5. A new message will be created with the page address inserted in the message body. Choose a recipient, enter any accompanying message and then select Send.Clearing History, Cookies, or Temporary FilesFrom time to time you might want to clear up space on the device and wipe Internet Explorer’s browser history.1. Select Start > Internet Explorer.2. Select Menu > Tools > Options.3. Select the Memory tab.4. Change the number in the day(s) box if needed.5. Select Clear History or Delete Files, then select OK.Viewing a Page in Full Screen Mode1. Select Start > Internet Explorer.2. Select Menu > View > Full Screen.NOTE: To exit full screen mode, select and hold on the screen and then un-check the Full Screen item in the pop-up menu to cancel the selection.

Chapter 8 | Transferring Files to and From the Device

74You might need to transfer application data such as Word documents, Excel spreadsheets, PowerPoint slides and/or media les from your PC to the device and vice versa. This section describes different methods for transferring les to and from the device.8.1 Using ActiveSyncNOTE: To transfer les from PC to the device with ActiveSync, Windows XP users must rst install Microsoft ActiveSync on the PC rst. Windows Vista users should install Windows Mobile Device Center from the Getting start CD, which can also be downloaded at http://www.microsoft.com/downloads, or plug the device into the PC and run Windows Update. Please refer to “Chapter 3. Synchronizing Information” for details on how to install and set up ActiveSync.1. Connect the device to the PC with the USB cable. Microsoft ActiveSync on the PC should start up the Synchronization Setup Wizard automatically.2. Select an information type under Synchronization Options in the Synchronizatio Setup Wizard by checking the appropriate checkbox.3. Select the Settings button and add the les you want to transfer to the device. Select the OK button when you nish.4. Select Next, then select Finish to start the synchronization process.5. On the device, select Start > Programs > File Explorer. The newly transferred les should appear under My Documents. Check to see if the les have been transferred to the device successfully.

758.2 Transferring from Memory Cards1. Insert your memory card into the device’s MicroSD card slot. (See “1.3 Installing SIM card, Battery and MicroSD card” for details.)2. Select Start > Programs > File Explorer.3. In the Show list, select Storage Card.4. File Explorer should display all the les stored in your memory card. Select and hold the le or folder you want to transfer and then select Copy from the pop-up menu.5. From the Show list in File Explorer, choose the destination folder for the copied les. (For example, select My Device > My Documents.)6. In the destination folder, select Menu > Edit > Paste.8.3 Using BluetoothBluetooth is a short-range wireless communication technology. Devices with Bluetooth capabilities can exchange information over a distance of about 10 meters without requiring a physical connection.Before transferring les, you must turn on Bluetooth and establish a Bluetooth partnership between the device and the other device.Turning on Bluetooth1. Select Start > Settings > Connections tab >Bluetooth > Mode tab.2. Select the Turn on Bluetooth option.Creating a Bluetooth Partnership1. Select Start > Settings > Connections tab > Bluetooth, then select the Device tab.2. Select Add new device. The device searches for other Bluetooth-enabled devices and displays them in the list.

763. Select the device with which you want to create a Bluetooth partnership, then select Next. If the device you are looking for does not appear in the list, ensure that it is in range and that it has been made discoverable, then select Refresh.4. In Passcode, enter an alphanumeric passcode between 1 and 16 characters, then select Next. Otherwise, leave the passcode blank. For security reasons, it is strongly recommended that you use a passcode.5. Enter the same passcode on the other device (there will be a prompt to do so).6. Select the service to use from the partner device, then select Finish. One of the most common examples of this is to choose the Microsoft ActiveSync service from the list of your PC’s available Bluetooth services. Receiving a FileBefore receiving les, you must allow incoming beams. Select Start > Settings > Connections tab > Beam, then enable the Receive all incoming beams option.To receive beamed information, the device must rst be made discoverable.1. Select Start > Settings > Connections tab > Bluetooth, then select the Mode tab.2. Select Make this device visible to other devices.3. On your PC (or other Bluetooth-enabled devices), locate the le or item you want to send. For example, on your PC, you would use Windows Explorer to locate the le.4. In the example above, right-click the le and select the destination device under “to Bluetooth”.5. Select Yes when the device prompts about receiving a le.6. After the transmission process is nished, the le should be saved in My Documents on the device.

77Beaming an ItemOnce you create a partnership, the two partnered Bluetooth-enabled devices don't need to be discoverable to communicate. In Calendar, Contacts, Notes, Tasks and Pictures, you can beam les and information to other devices using Bluetooth.1. Turn on Bluetooth. Select Start > Settings > Connections tab > Bluetooth > Mode tab. Select the Turn on Bluetooth checkbox.2. Select an item you want to beam. For example, open a task in Tasks.3. Select Menu > Beam.4. Select the destination device.5. Select OK after the transfer is done.NOTE: If the target device does not appear in the list, ensure that the device is powered on, discoverable and within close range of the device. Also, ensure that Bluetooth has been enabled on the device.Bluetooth is turned off by default. However, if you turn Bluetooth on, the device will remember this setting and turn it back on automatically whenever the device powers up. To save battery power, please remember to turn Bluetooth off after beaming information.

Chapter 9 | Other Applications

799.1 Windows Live MessengerYou can send instant messages over the Internet with Windows Live Messenger.NOTE: The device must be connected to the Internet before you can start using Windows Live Messenger. To connect to the Internet, refer to “Chapter 7. Connecting to the Internet” for details. You must have a valid Microsoft .NET Passport or Hotmail account before you can sign in to Windows Live Messenger.Signing In To Windows Live Messenger1. Select Start > Programs > Messenger.2. In Sign in as, choose a display status (e.g. Online or Busy), then select Sign in.3. Before using Windows Live messenger for the rst time, you have to accept the Windows Live Terms of Use and Privacy Statement. Select Accept to continue.4. Enter your Windows Live ID and password and select Next.5. Select whether to show Windows Live on the Today screen or not. Then select Next.6. Choose from the Sync options and select Next.7. Windows Live will then sign you in online.To sign out of Windows Live MessengerSelect Menu > Sign out.

80Adding/Deleting a Windows Live Messenger Contact1. Sign in to Windows Live Messenger.2. Do any of the following: • To add a contact, select Menu > Add New Contact, then follow the on-screen instructions. • To delete a contact, select and hold the contact name in the Windows Live contact list, select View contact’s info > Menu > Delete Contact.Sending an Instant Message1. Sign into Windows Live Messenger.2. Select the contact’s name, then select Send IM.3. Enter a message, select Menu > Send.4. To close the chat window, select Menu > End conversation.Changing Windows Live Messenger Settings1. Sign in to Windows Live Messenger.2. Select Menu > Options.3. Select from the available options and then select Done.To Delete or Change the Windows Live AccountSelect Menu > Window Live > Menu > Account options > Switch Windows Live ID.NOTE: This will delete all settings, including contacts and e-mails, associated with the Windows Live Account.

819.2 JETCET PDF5Opening a PDF FileTo open a le in JETCET PDF5, select the PDF le in File Explorer, or do the following:1. Select Start > Programs > JETCET PDF5.2. Select the le that you want to view.3. If you want to open a le on the network, tap to select the location and enter the server address.Viewing the DocumentAfter opening a le with JETCET PDF5, you can choose to view the le in full screen or zoom in/out the le. • Select Menu > View > Full screen. Use the four-way navigation pad on the screen to navigate through the document. • Select Menu > View > Tools. Select to t the width of the page onto the screen. Select to display the entire page on-screen. Select / to zoom in/out the le in the range from 25% to 200%.

829.3 Windows Media The device comes with Windows Media Player pre-loaded, which allows you to play digital audio and video les stored locally or on a network.Transferring Music and Videos to the deviceIf you want to store the media les to a storage card, insert a MicroSD card on the device before connecting the device to a PC.1. On your computer, open Windows Media Player.2. Connect the device to your computer using a USB cable.3. In Windows Media Player on your computer, click Sync.4. Drag each item you want to synchronize to the device pane on the right side of the Windows Media Player window.5. At the bottom of the device pane, click Start Sync. This will start the synchronization process.6. After transferring your media les, update your mobile device Media Library:a. Select Start > Programs > Windows Media.b. Select Menu > Library > My Device.c. Select Library > Storage Card if the les are stored in the MicroSD card. Otherwise, skip this step.d. Select Menu > Update Library.e. Select Done when update is completed.NOTE: Windows Media Player supports lyric display, if you store corresponding .lrc les for your .mp3 les in the same folder of your device, the lyric text can be displayed in synchronization with the song.

83Playing Media Files on the device1. Select Menu > Library to open the Library screen.2. Select a category (e.g. My Music > All Music).3. Select an item, then select Play.4. You can then use the following functions when playing audio or video les: : Display the video in full screen. : Launches a Web site where you can nd music and videos to play. : Skip to the beginning of the current le or to the previous le. : Pause/Play. : Skip to the next le. : Decrease the volume level. : Increase the volume level. : Move to a different position in the currently playing track.Saving a New Playlist1. Select Start > Programs > Windows Media.2. Select Menu > Library.3. Select a category (e.g. My Music > All Music).4. Select an item, select Menu > Queue Up. Selected item will be added to the Now Playing list immediately.5. Select Menu > Now Playing.6. Select Menu > Save Playlist.7. Enter a name for the playlist, then select Done.On the Windows Media playback screen, you can select Menu > Options to change playback settings.

849.4 MIDlet ManagerA MIDlet is a Java program which can be downloaded from the Internet Explorer Mobile and work on the device. You can use MIDlet Manager to handle all Java les on the device, including download, installation, upgrade and deletion of MIDlets.Installing a MIDlet1. Select Start > Program > MIDlet Manager.2. Select Actions > Install, select whether to install the MIDlet from local storage or a website.• To download and install the MIDlet from a website, launch the MIDlet hyperlink on the website and then follow prompts on the screen to complete the installation.• To install the MIDlet from local storage, double click on the le and then follow on-screen prompts to complete the installation.3. Select OK on the screen.9.5 Phone ProfileProles dene how the device reacts when you receive a call or a message, how your keypad sounds when you press a key and more. Select or customize the most suitable prole for your environment, such as when you are in a meeting or outdoors. The proles available are: Normal, Silent, Vibrate, Outdoor and Headset. Each of them can be renamed or customized to t your own needs. (Your device will switch to the Headset mode automatically while connecting to a headset.)

85Editing a Prole1. Select Start > Programs > Phone Prole.2. Select a prole and then select Edit.3. Select your preferred sound options for calls and messaging.4. Select the Advance tab to set dial pad sound or auto-answering function.5. Select OK to apply the changes.Restoring a Prole1. Select Start > Programs > Phone Prole.2. Do either of the following: • Select the prole that you want to restore to default, select Menu > Restore Selected. • Select Menu > Restore All to restore all proles to default.3. Select OK.Using Audio Files as Ring TonesYou can use your own audio les as a ring tone. Open File Explorer, select and hold the le, then select the Set As Ringtone command.9.6 GPSA GPS (Global Positioning System) signal receiver is built in the device. You have to install a mapping software on the device to start navigating. Please follow the instruction of your mapping software to install it and use the navigation functions. You may need to specify the GPS hardware port when installing the mapping software. Select the following value if requested. • GPS hardware port: COM9. • Baud rate: 9600.NOTE: Your device is equipped with AGPS (Assisted GPS), please consult with your service provider to see if this function is supported.Using AGPS may be charged extra fee by your service provider.

86IMPORTANT: Some mapping software or GPS navigation software may not be compatible with the device, please consult with the software provider/retailer before installing the software.Receiving Better Satellite SignalsGPS positioning is limited by bad weather (e.g. rainy or cloudy days) and usage location (e.g. tall buildings, tunnels, underpasses, trees, bridges…etc). Typically, GPS does not work indoors, nor can GPS signals penetrate buildings, car sun shades and heat reective lm with metallic content.It can take several minutes the rst time you establish a GPS connection. If you nd the device can not detect the satellite signal, try the following:•Move the device to an open space without tall buildings or trees around it. • Make sure there are no wireless communication products (e.g. radar-detecting devices and mobile phones) nearby since these products may cause unstable signal reception. • Connect an external Bluetooth GPS receiver (not included in the package) to the device in order to enhance the reception.Important Notice about Using GPS• The GPS is built and operated by the US Defense Department. The accuracy of location data may be affected by changes made by the Department.• GPS should not be used for precise location measurement. It can only be used as a navigation aid.• Do not turn on the car engine when the device is connected to the car charger (not included in the package) as this may damage the device.• Make sure the DC voltage provided by your car and the electric current supplied from your car charger are compatible with the device before using them.• Using the GPS may drain the battery faster than usual.

879.7 Internet SharingWith Internet Sharing, you can connect your PC or notebook to the Internet by using the device’s networking capability.NOTE: Please remember to install a valid SIM card and establish a GPRS or dial-up connection before using Internet Sharing.In order to use a USB cable connection, you have to install ActiveSync or WMDC on your PC (refer to chapter three).Please disable ActiveSync or WMDC before launching Internet Sharing.Setting up the Device as a USB Modem1. Select Start > Programs > Internet Sharing.2. In PC Connection, select USB.3. In Network Connection, select the connection that you want to use.4. Connect the device to your PC with the USB cable.5. Select Connect on the device.Setting up the Device as a Bluetooth Modem1. Establish a Bluetooth partnership between the device and your PC (refer to chapter 8.3) and make sure Bluetooth on the device and your PC are turned on.2. Select Start > Programs > Internet Sharing.3. In PC Connection, select Bluetooth PAN.4. In Network Connection, select the connection that you want to use.5. Select Connect on the device.6. Set up a Bluetooth PAN (Personal Area Network) on your PC.7. Select Connect on the device.

889.8 Backup/RestoreIt is advisable to make backups of your device data regularly in case important data is accidentally lost or damaged. You can restore your data from those backup copies as needed. Device data can be backed up to or be restored from the device storage or from a compatible memory card.Backing up Data1. Tap Start > Programs > Backup Manager.2. Tap the Backup icon.3. Select the check box(es) of the item(s) that you want to backup. Tap Next.4. You can rename the backup copy or rewrite its description as needed.5. Select the location for storing the backup copy: My Document or storage card. Tap Next.6. You can have the backup copy encrypted: select Encrypted and then enter a password. Tap Next to continue.7. Tap Start to start saving the backup copy.Restoring Data1. Tap Start > Programs > Backup Manager.2. Tap the Restore icon.3. Select the le you want to restore to your device. Tap Next.4. Tap Start to start restoring.

Chapter 10 | Camera

9010.1 OverviewThe built-in Camera application allows you to use the camera /microphone to capture videos and images. Your camera has the following features:Single image captureTime controlled captureVideo captureQuality, size and le format optionsSpecial effectsAdvanced options including anti-icker, storage location, reset counterTo open the camera, press and hold the camera button on the side of the device. 10.2 Taking a picture1. Press and hold the camera button to launch the camera application.2. Position the device so that the image you want to capture of is displayed on the screen.3. Press the camera button to take the picture.1 2 3 456 879101. Capture mode2. Resolution3. Quality4. Storage location5. Shots remaining6. Single shot/Timer7. GPS status8. Close9. Settings10. View all pictures

9110.3 Taking a video1. Press and hold the camera button to launch the camera application.2. If the camera is in still capture mode, press the capture mode icon on the top left.3. Position the device so that the image you want to capture is displayed on the screen.4. Press the camera button to start recording.5. Press the camera button to stop recording.10.4 Settings and OptionsTo access settings, press . Press to switch between menu pages.Still CameraShooting mode Single-shot, Timer-shotResolution UGA(1600*1200), VGA(640*480), QVGA(320*240)Effect Off, Negative, Monochrome, SepiaAnti icker Off, 50Hz, 60Hz

92Quality High, Low, NormalGPS Turn on or turn off the GPS function. After GPS is connected, coordinate data will be added to photos you take. (To view GPS coordinates embedded in a photo, open the photo on your PC, right-click on the photo to see its information.)GPS on / GPS is connecting / GPS off Other My Documents/Storage Card: select where you want to save your les.Reset Counter: reset the le naming counter back to 1.Video Camera SettingsEffect Off, Negative, Monochrome, SepiaResolution QCIF(176*144), QVGA(320*240)Video format 3GP, MP4Other My Documents/Storage Card: select where you want to save your les.Reset Counter: reset the le naming counter back to 1.10.5 Pictures and VideosViewing and Editing PicturesTo view captured pictures, tap . Scroll to a picture and do any of the following:• Select Menu. You can see a list of options for managing the picture (e.g. Delete)• Select View. You can view the selected picture.• Select View and then select Menu. From the menu list, you can Zoom in/out, edit and rename the picture.Viewing and Managing Videos1. Select Start > Programs > Pictures & Videos.2. Select My Pictures , then select My Videos under My Documents.3. Select a video clip to play it or select Menu to show a list of available options.

Appendix

94A.1 SpecificationsSystem InformationProcessor Qualcomm MSM7201, 400MHzOperating System Windows Mobile 6.1 ProfessionalMemory 128 MB RAM256 MB ROMDimensions and WeightDimensions 113 x 58 x 15.2 mm (4.44*2.28*0.6 inches)Weight 136g (4.8 oz) with batteryKeys and NoticationsKeys Track ballOstia Button (congurable)Volume up and downCamera Button (congurable)Power ButtonTALK and END/HOMEReset ButtonSTARTOKNotications VibrateAudibleVisual messageLED 1: Missed call / Message Notication / Bluetooh / GPS on (Blue Blink)LED 2: Charging (Red) – Priority 1 Full Charged (Green) – Priority 1 GSM/UMTS (Green Blink) – Priority 2DisplayType Transmissive Microreective (TMR) TFT LCD with touch panel and backlightSize/Resolution 2.8’’ VGA 480x640 65K colors

95Cellular connectivityBand GSM/GPRS/EDGE 850/900/1800/1900 MHzUMTS/HSDPA/HSUPA 850/1900/2100 MHzUMTS up to 384k/384k Upload/DownloadHSDPA/HSUPA up to 7.2Mbps download/2Mbps uploadSystem GSM/GPRS/EDGE class 12 supportedAntenna Embedded (2G/3G all band, Wi-Fi, GPS, Bluetooth)Connectivity and InterfaceBluetooth 2.0 compliant + EDRUSB USB 2.0 Full Speed, mini USB (ActiveSync, Card reader, Internet sharing and charging)Wi-Fi 802.11b/g compliantExternal Memory CardCard Slot MicroSD with SDHC 2.0Battery and PowerBattery/Capacity Lithium-Ion Polymer Cell, 1410 mAh2G Talk Time3G Talk TimeStandby Timeup to 7.5hoursup to 5hours200 hoursCamera ModuleType Main camera: 2.0 MP CMOS sensor camera with Fix FocusSecond camera: 0.3MP CMOSMax Resolution 1600 x 1200GPSChipset Qualcomm gpsOne (MSM7201 integrated)GPS Receiver 8 channelsAGPS compatible Yes

96OthersHeadset Connector 2.5mm stereo connectorTV-out Through 2.5mm audio jack with AV cableA.2 Regulatory NoticesRegulatory Agency IDsFor regulatory identication purposes, your product is assigned a model number of Traveler 117.To ensure continued reliable and safe operation of the device, use only the accessories listed below with your Traveler 117.The Battery Pack has been assigned a model number of Traveler 117. This product is intended for use with a certied Class 2 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.European Union NoticeProducts with CE marking comply with the R&TTE Directive (99/5/EC), the EMC Directive (89/336/EEC), and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.Compliance with these directives implies conformity to the following European Norms (in parentheses are the equivalent international standards).

97・ETSI EN 301 489-1Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements.・ETSI EN 300 328Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques.・EN 50360/EN50361Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic elds (300MHz – 3GHz)・ETSI EN 301 489-7Electromagnetic compatibility and Radio spectrum matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specic conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS).・ETSI EN 301 489-17Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMag-netic Compatibility (EMC) standard for radio equipment and services; Part 17: Specic conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment.・EN 60950-1 (IEC 60950-1)Safety of information Technology Equipment.・ETSI EN 301 511Global system for mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands, covering essential requirements of article 3.2 of the R&TT directive (1995/5/EC).

98Federal Communications Commission NoticeThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee this equipment does not cause harmful interference to radio or TV reception. This can be determined by turning the equipment on and off. The user is encouraged to try to correct the interference by one or more of the following measures:・Reorient or relocate the receiving antenna.・Increase the separation between the equipment and receiver.・Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.・Consult the dealer or an experienced radio or television technician for help.SAR Information・0.984W/Kg @1g (FCC) head・1.470W/Kg @1g (FCC) body・0.645W/Kg @10g (CE)FCC RF Exposure requirements: SAR compliance for body-worn operations is restricted to accessories which provide at least 2 cm separation between the device and the user’s body.

99Exposure to Radio Frequency (RF) SignalsYour wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies:・American National Standards Institute (ANSI) IEEE. C95.1-1992・National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986・International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996・Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 Watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in usage. Normal conditions only ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for personal safety reasons, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment.WEEE NoticeThe Waste Electrical and Electronic Equipment (WEEE) Directive is designed to encourage and regulate the collection, re-use, recycling and recovery of waste electrical and electronic equipment, which entered into force as European law on 13th February 2003. The Directive aims to improve the level of recycling of electrical and electronic equipment (EEE) and encourages designers to develop products with recycling efciency in mind; it also aims to improve our environment and reduce risks to human health through the proper treatment of discarded goods.

101A.3 PC Requirement to Run ActiveSync 4.5To connect the device to a Windows PC running any Windows operating system prior to Windows Vista*, you must have Microsoft® ActiveSync® program installed on your PC. ActiveSync 4.5 is included in the Installation CD, which is compatible with the following operating systems and applications: ・Microsoft® Windows® 2000 Service Pack 4・Microsoft® Windows® Server 2003 Service Pack 1・Microsoft® Windows® Server 2003 IA64 Edition Service Pack 1・Microsoft® Windows® Server 2003 x64 Edition Service Pack 1・Microsoft® Windows® XP Professional Service Packs 1 and 2・Microsoft® Windows® XP Home Service Packs 1 and 2・Microsoft® Windows® XP Tablet PC Edition 2005・Microsoft® Windows® XP Media Center Edition 2005・Microsoft® Windows® XP Professional x64 Edition・Microsoft® Outlook® 98, Microsoft® Outlook® 2000 and Microsoft® Outlook® XP, andMicrosoft® Outlook® 2003 messaging and collaboration clients・Microsoft® Ofce 97, excluding Outlook・Microsoft® Ofce 2000・Microsoft® Ofce XP・Microsoft® Ofce 2003・Microsoft® Internet Explorer 4.01 or later (required)・Microsoft® Systems Management Server 2.0* If you are a Windows Vista user please use Windows Mobile Device Center, not Microsoft ActiveSync, for device connectivity between your Windows Mobile device and Windows Vista.

Navigation menu

Upload a User Manual

Namespaces

Wiki Guide
HTML
PDF
Info

Views

User Manual
Discussion / Help

Navigation

© 2025 UserManual.wiki | Privacy Policy

Contact Us
DMCA