Intracom Asia 525664 Wireless 150N Repeater / Extender User Manual FR WA1012N E V1 0

Intracom Asia Co., Ltd. Wireless 150N Repeater / Extender FR WA1012N E V1 0

Manual

11N Mini Wireless AP User Manual Version 1.0 | 2/11/2014
11N Mini Wireless AP 1 CONTENTS Chapter 1 Introduction................................................................................................................3 1.1 Features............................................................................................................... 3 1.2 System Requirement ........................................................................................... 3 1.3 Environment......................................................................................................... 3 1.4 Package Contents................................................................................................ 3 Chapter 2 Hardware Installation...............................................................................................5 2.1 Front Panel .......................................................................................................... 5 2.2 Physical Interface................................................................................................. 5 2.3 Typical install........................................................................................................ 6 Chapter 3 TCP/IP Configuration...............................................................................................9 3.1 Set the Network Configurations ........................................................................... 9 3.2 Getting Started....................................................................................................11 Chapter 4 Configuring the AP.................................................................................................12 4.1 Operating Mode ................................................................................................. 12 4.2 WAN Interface.................................................................................................... 12 4.2.1 WAN Interface.....................................................................................................12 4.2.2 DDNS ...................................................................................................................16 4.3 LAN Interface..................................................................................................... 17 4.3.1 LAN Interface ......................................................................................................17 4.3.2 Static DHCP ........................................................................................................18 4.3.3 DHCP Client........................................................................................................19 4.4 Wireless Setup................................................................................................... 19 4.4.1 Site Survey ..........................................................................................................20 4.4.2 Basic.....................................................................................................................20 4.4.3 Security ................................................................................................................21 4.4.4 Access Control....................................................................................................22 4.4.5 WDS .....................................................................................................................23 4.4.6 WPS......................................................................................................................23 4.4.7 Schedule..............................................................................................................24 4.5 Server Setup...................................................................................................... 25 4.5.1 Port Forwarding ..................................................................................................25 4.5.2 DMZ......................................................................................................................25 4.6 Security.............................................................................................................. 26 4.6.1 Port Filtering........................................................................................................26 4.6.2 IP Filtering............................................................................................................27 4.6.3 URL Filtering .......................................................................................................27 4.6.4 MAC Filtering ......................................................................................................28 4.7 QoS Setup ......................................................................................................... 28 4.8 System............................................................................................................... 29 4.8.1 Time Zone............................................................................................................29
11N Mini Wireless AP 24.8.2 Upgrade Firmware..............................................................................................30 4.8.3 Save/Reload Settings ........................................................................................30 4.8.4 Password.............................................................................................................30 4.8.5 Reboot..................................................................................................................31 4.8.6 Language.............................................................................................................31 4.9 Status................................................................................................................. 31 4.9.1 Status....................................................................................................................31 4.9.2 Statistics...............................................................................................................32 4.9.3 System Log..........................................................................................................32 4.10 Logout.............................................................................................................. 33
11N Mini Wireless AP 3Chapter 1 Introduction Congratulations on your purchase of this outstanding 11N Mini Wireless AP. The Wireless AP is a 150M Mini Wireless AP/Repeater, fully complies with 802.11b/g/n specifications, adopting 1T1R architecture, up to 150Mbps data rate, you can connect notebook computer to a wireless network and access high-speed Internet connection which is beneficial for the such as HD video streaming and online gaming applications. The default mode is repeater which is especially useful for a large space to eliminate signal-blind corners. It is good choice for Large house, office, warehouse or other spaces where the existing wireless signal is weak. Instructions for installing and configuring this product can be found in this manual. Before you install and use this product, please read this manual carefully for full exploiting the functions of this product. 1.1 Features z Compatible with IEEE 802.11b/g/n z Wireless speed up to 150Mbps z Internal power supply z Travel-sized design, Ideal for home or travel use z Support WPA and WPA2 to safeguard wireless network access security z Supports AP, Router, Repeater operation modes 1.2 System Requirement z An Ethernet-Based Cable or DSL modem z An wireless network card on PC z TCP/IP network protocol for each PC z RJ45 Twisted-pair z Microsoft IE (or Firefox or Netscape) 1.3 Environment Operating Temperature: 0 ~40℃℃ Storage Temperature: -10 ~70℃℃ Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing 1.4 Package Contents Please make sure you have the following in the box, if anything is missing, please contact your vendor.
11N Mini Wireless AP 4¾ 11N Mini Wireless AP ¾ User Manual ¾ RJ-45 Network Cable ¾ Warranty Card
11N Mini Wireless AP 5Chapter 2 Hardware Installation 2.1 Front Panel The front panel provides LED’s for device status. Refer to the following table for the meaning of each feature. 2.2 Physical Interface There are three physical interfaces on this AP. Name Status Indication Off Power is off. POWER On Power is on. Off There is no device linked to the corresponding port. On There is a device linked to the corresponding port but there is no activity. ETH (LAN/WAN) Flashing There is an activity device linked to the corresponding port. Off The Wireless function is disabled. On The Wireless function is enabled. WLAN Flashing Data is received or sent through the Wireless.
11N Mini Wireless AP 6 Interface Description Power Plug A Power Plug for connecting the AP to a 100V~240V AC power socket. Wired Port A 10/100Mbps LAN/WAN Port for connecting the AP to the PC or the broadband device with a network cable. Reset(WPS) Button The Reset Button has two functions, WPS and Factory Default. When press it less than 2 seconds, it is WPS function, more than 5 seconds, the AP will restore to factory default. 2.3 Typical install AP Mode: As the supplement of wired LAN, Wireless AP enables the wired LAN to connect to the Internet wirelessly. The default mode of Wireless AP is AP. Plug the power plug of Wireless AP in electrical wall socket and connect the Ethernet cable correctly, you can surf the Internet by connecting your PC(s) to The Router wirelessly. To avoid the conflict of DHCP service with front-end devices, the DHCP server is default to be closed on this mode. If you want to login in the management page, please set your computer’s IP address manually. As below picture, under this mode, wired port works as LAN, connects wired signal directly and turns the wired into wireless via AP device for the using of terminal wireless equipment.
11N Mini Wireless AP 7 1. Connect the LAN port of Wireless AP to the wired network port with and Ethernet cable. 2. Plug the power plug of Wireless AP in electrical wall socket. 3. Power on the PC(s) and notebook(s). Router Mode: As a wireless router, Wireless AP enables multi-user to share Internet via DSL/Cable Modem. As below picture, under this mode, wired port works as WAN, which can access network by using WI-FI Network, Cable/DSL Modem to be used by the lower extreme wireless device. DHCP server is default opened and it is recommended that the IP address and DNS server address obtained automatically. 1. Connect the WAN port of Wireless AP to the LAN port on the DSL/Cable Modem. 2. Connect the WAN port on the DSL/Cable Modem to the wired Internet. 3. Plug the power plug of Wireless AP in electrical wall socket. 4. Power on the DSL/Cable Modem, PC(s) and notebook(s). Wireless ISP Mode: The Wireless AP is used as a wireless network card to connect the wireless network signal or wireless router. As below picture, the only wired port works as LAN. Computer could connect to the device
11N Mini Wireless AP 8by wired way. 1. Connect the PC to the LAN port of Wireless AP with an Ethernet cable. 2. Plug the power plug of Wireless AP in electrical wall socket. 3. 3. Power on the PC.
11N Mini Wireless AP 9Chapter 3 TCP/IP Configuration 3.1 Set the Network Configurations Under AP mode, you can proceed configuration by using the mode of wireless access or wired access. Under Router mode, you can access device to process configuration by using the mode of wireless access. After connecting device, operate according to below steps: 1. On your computer desktop right click "My Network Places" and select "Properties". 2. Right click "local Area Network Connection" and select "Properties". 3. Select "Internet Protocol (TCP/IP)" and click "Properties".
11N Mini Wireless AP 10 4. Select "Obtain an IP address automatically" or select "Use the following IP address(S)". A. Select "Obtain an IP address automatically" and "Obtain DNS server address automatically". Click "OK". B. "Use the following IP address (S)" IP Address: 192.168.10.XXX :( XXX is a number from 2~254) Subnet Mask: 255.255.255.0 Gateway: 192.168.10.254 DNS Server: You need to input the DNS server address provided by you ISP. Otherwise, you can use the AP's default gateway as the DNS proxy server. Click "OK" to save the configurations. Note: When your wireless AP is in AP mode, the equipment system DHCP function
11N Mini Wireless AP 11 will be automatic to shut down, you need to press the B method and set the IP. Click "OK" to save the configurations. 3.2 Getting Started To access the configuration pages, open a web-browser such as Internet Explorer and enter the IP address of the AP (192.168.10.254). The Default User/Password: admin If succeed, you can see the follow page.
11N Mini Wireless AP 12Chapter 4 Configuring the AP This chapter will show each Web page’s key functions and the configuration way. 4.1 Operating Mode The Wireless AP supports three operation modes, Gateway, Bridge and Wireless ISP. And each mode is suitable for different use, please choose correct mode. 4.2 WAN Interface There are two submenus under the WAN Interface menu: WAN Interface, DDNS. Click any of them, and you will be able to configure the corresponding function. 4.2.1 WAN Interface This page is used to configure the parameters for Internet network which connects to the WAN port of your Access Point. Here you may change the access method to Static IP, DHCP Client, PPPoE, PPTP or L2TP by click the item value of WAN Access type.
11N Mini Wireless AP 131. If you ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select Static IP option. The Static IP settings page will appear: IP Address / Subnet Mask: This is the AP's IP Address and Subnet Mask as seen by external users on the Internet (including your ISP). If your Internet connection requires a static IP address, then your ISP will provide you with a Static IP Address and Subnet Mask. Gateway: Your ISP will provide you with the Gateway IP Address. MTU Size: The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP. DNS: Your ISP will provide you with at least one DNS IP Address.
11N Mini Wireless AP 14Clone Mac Address: You can configure the MAC address of the WAN. 2. If your ISP provides the DHCP service, please select DHCP Client option, and the AP’s will automatically get IP parameters from your ISP. You can see the page as follows: Host Name: This option specifies the Host Name of the AP. MTU Size: The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP. Set DNS Manually: If your ISP gives you one or two DNS addresses, select Set DNS Manually and enter the primary and secondary addresses into the correct fields. Otherwise, the DNS servers will be assigned dynamically from your ISP. Clone Mac Address: You can configure the MAC address of the WAN. 3. If your ISP provides a PPPoE connection, select PPPoE option. And you should enter the following parameters:
11N Mini Wireless AP 15User Name / Password: Enter the User Name and Password you use when logging onto your ISP through a PPPoE connection. Service Name(AC): The service name and AC (Access Concentrator) name should not be configured unless you are sure it is necessary for your ISP. In most cases, leaving these fields blank will work. Connection Type: There you can select Continuous, Connect on Demand or Manual. Idle Time: You can configure the AP to disconnect from your Internet connection after a specified period of inactivity. 4. If your ISP provides a PPTP connection, select PPTP option. And you should enter the following parameters: Dynamic IP (DHCP): Choose the IP address information provided by automatic acquisition ISP, or manual input. Default Gateway: Enter the gateway IP provided by your PPTP Server. User Name / Password: Enter the User Name and Password you use when logging onto your ISP through a PPTP connection. 5. If your ISP provides L2TP connection, please select L2TP option. And you should enter the following parameters:
11N Mini Wireless AP 16 Dynamic IP (DHCP): Choose the IP address information provided by automatic acquisition ISP, or manual input. Default Gateway: Enter the gateway IP provided by your L2TP Server. User Name / Password: Enter the User Name and Password you use when logging onto your ISP through a L2TP connection. 4.2.2 DDNS Dynamic DNS is a service that provides you with a valid, unchanging, internet domain name (an URL) to go with that (possibly ever changing) IP-address.
11N Mini Wireless AP 17 Service Provider: Select one from the drop-down menu, such as DynDNS, OrayDDNS or TZO. Domain Name: Enter the domain name (Such as host.dyndns.org). User Name/Email: Enter the user name or email the same as the registration name. Password/Key: Enter the password you set. 4.3 LAN Interface There are three submenus under the LAN Interface menu: LAN Interface, Static DHCP, DHCP Client. Click any of them, and you will be able to configure the corresponding function. 4.3.1 LAN Interface This page is used to configure the parameters for local area network which connects to the LAN port of your Access Point. Here you may change the setting for IP address, subnet mask, DHCP, etc..
11N Mini Wireless AP 18 IP Address: Enter the IP address of your AP (factory default: 192.168.10.254). Subnet Mask: An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. Default Gateway: Enter the gateway IP address. DHCP: Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually. DHCP Client Range: Specify IP address for the DHCP Client Range. DHCP Lease Time: The DHCP Lease Time is the amount of time a network user will be allowed connection to the AP with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be "leased" this dynamic IP address. Clone MAC Address: Input your MAC address should be cloned. 4.3.2 Static DHCP This page allows you reserve IP addresses, and assign the same IP address to the network device with the specified MAC address any time it requests an IP address.
11N Mini Wireless AP 19 IP Address: Enter the IP address which needs to be bound. MAC Address: Enter the MAC address of the computer you want to assign the above IP address. Comment: You can add some comment for this item. Click “Apply” to add the entry in the list. 4.3.3 DHCP Client This table shows the assigned IP address, MAC address and time expired for each DHCP leased client. 4.4 Wireless Setup There are seven submenus under the Wireless Setup menu: Site Survey, Basic, Security, Access Control, WDS, WPS, Schedule. Click any of them, and you will be able to configure the corresponding function.
11N Mini Wireless AP 204.4.1 Site Survey This page provides a tool to scan for wireless networks. If an Access Point or IBSS is found, you could choose to connect to it manually when client mode is enabled. 4.4.2 Basic This page is used to configure the parameters for wireless LAN clients which may connect to your Access Point. Here you may change wireless network parameters.
11N Mini Wireless AP 21Disable Wireless LAN Interface: Check this box to to disable the AP’s wireless features; uncheck to enable it. Band: Select one mode from the following. The default is 2.4GHz (B+G+N) mode. Mode: Support AP, Client, WDS and AP+WDS mode. Network Type: This type is only valid in client mode. SSID: SSID (Service Set Identifier) is the unique name of the wireless network. Channel Width: Select the channel width from the pull-down list. Select 40MHz if you use 802.11n or 802.11n mixed mode, otherwise 20MHz, it is default value. Channel Number: Indicates the channel setting for the AP. Broadcast SSID: Select “Enable” to enable the device's SSID to be visible by wireless clients. The default is enabled. WMM: It will enhance the data transfer performance of multimedia data when they’re being transferred over wireless network. 4.4.3 Security This page allows you setup wireless security. Using WEP or WPA Encryption Keys will help prevent unauthorized access to your wireless network. The following picture shows how to set the WEP security.
11N Mini Wireless AP 22 Key length: WEP supports 64 Bits or 128 Bits security key. Key Format: User can enter key in ASCII or Hex format. Encryption Key: Enter the key, its format is limited by the Key format, ASCII or Hex. The following picture shows how to set WPA-PSK security, you can select WPA (TKIP), WPA2 (AES) and Mixed mode. Pre-Shared Key Format: Specify the format of the key, pass phrase or hex. Pre-Shared Key: Enter the key here, its format is limited by the key format. 4.4.4 Access Control The Wireless MAC Address Filtering feature allows you to control wireless stations accessing the AP, which depend on the station’s MAC addresses. Mode: If you choose 'Allowed Listed', only those clients whose wireless MAC addresses are in the access control list will be able to connect to your Access Point. When 'Deny Listed' is selected, these wireless clients on the list will not be able to connect the Access Point. The MAC Address format is 001122334455.
11N Mini Wireless AP 234.4.5 WDS Wireless Distribution System uses wireless media to communicate with other APs, like the Ethernet does. To do this, firstly you must set AP Mode to WDS or AP+WDS in basic setting, then enable WDS function and set another AP MAC which you want to communicate with. The WDS supports PSK security mode. Of course in order to make APs work, you have to keep them the same channel and security mode. Enable WDS: Check this box to enable WDS function. MAC Address: Enter the remote AP MAC address. Comment: You can add some comment for this item. Set Security: Set WDS security. Encryption: You may select None or WPA2 (AES). Pre-Shared Key Format: You can select Passphrase or HEX(64 Characters). Pre-Shared Key: Pre-shared key(PSK) is a method to set encryption keys. Commonly used in Wi-Fi Protected Access. 4.4.6 WPS WPS is designed to ease set up of security Wi-Fi networks and subsequently network management. This AP supports WPS features for AP mode, AP+WDS mode, and Infrastructure-Client mode.
11N Mini Wireless AP 24 Disable WPS: Check this box and clicking “Apply” will disable WPS function. WPS is turned on by default. WPS Status: When AP’s settings are factory default, it is set to open security and un-configured state, some registers such as Vista WCN can configure AP. Otherwise If it already shows “Configured”, it means that the AP has setup its security. Self-PIN Number: It is AP’s PIN. Start PBC: Clicking this button will invoke the Pus Button Configuration of WPS. If one station wants to connect to the AP, it must click its PBC button in two minute. Note: This AP also has a hardware button, it is same button with reset. When click this button less than two seconds, the AP will run PBC function, during this time, the station can connect to the AP by its software or hardware WPS button. By the way, click this button exceed 5 seconds, the AP will restore factory default. Client PIN Number: The length of PIN is limited to four or eight numeric digits. If the AP and Station input the same PIN and click “Start PIN” button in two minutes, they will establish connection and setup their security key. 4.4.7 Schedule This page allows you setup the wireless schedule rule. Please do not forget to configure system time before enable this feature.
11N Mini Wireless AP 25Enable Wireless Schedule: Check this box will enable Wireless Schedule function. 4.5 Server Setup There are two submenus under the Server Setup menu: Port Forwarding, DMZ. Click any of them, and you will be able to configure the corresponding function. 4.5.1 Port Forwarding If you configure the AP as Virtual Server, remote users accessing services such as Web or FTP at your local site via public IP addresses can be automatically redirected to local servers configured with private IP address. In other words, depending on the requested service (TCP/UDP port number), the AP redirects the external service request to the appropriate server. Enable Port Forwarding: Check this box will enable Port Forwarding function. IP Address: That external User accesses the AP will redirect to this local IP. Protocol & Port Range: The packet with this protocol and port will be redirected to the local IP. Comment: You can add some comment for this item. Current Port Forwarding Table: The table shows all you have configured. You can delete one or all. 4.5.2 DMZ Some applications require multiple connections, like Internet games, video conferencing, Internet calling and so on. These applications cannot work with a pure NAT router. Port Triggering is used for some of these applications that can work with an NAT router.
11N Mini Wireless AP 26 Enable DMZ: Check this box will enable DMZ function. DMZ Host IP Address: To expose one PC to the Internet, select Enable DMZ and enter the computer's IP address in the DMZ Host IP Address field. 4.6 Security There are four submenus under the Security menu: Port Filtering, IP Filtering, URL Filtering, MAC Filtering. Click any of them, and you will be able to configure the corresponding function. 4.6.1 Port Filtering Entries in this table are used to restrict certain types of data packets from your local network passing to the Internet through the Gateway. Use of these filters can be helpful in securing or restricting your local network. Enable Port Filtering: Check this box will enable Port Filtering function. Port Range: The port range that you want to filter. Protocol: The protocol that you want to filter, either TCP, UDP, or Both.
11N Mini Wireless AP 27Comment: You can add some comment for this item. 4.6.2 IP Filtering The IP Filtering feature allows you to control Internet Access by specific users on your LAN based on their IP addresses. Enable IP Filtering: Check this box will enable IP Filtering function. Local IP Address: The Local IP address range that you want to filter. Protocol: The protocol that you want to filter, either TCP, UDP, or Both. Comment: You can add some comment for this item. 4.6.3 URL Filtering The URL filter is used to restrict LAN users access to the internet.
11N Mini Wireless AP 28Enable URL Filtering: Check this box will enable URL Filtering function. URL Address: The URL Address that you want to filter. 4.6.4 MAC Filtering The MAC Filtering feature allows you to control access to the Internet by users on your local network based on their MAC address. Enable MAC Filtering: Check this box will enable MAC Filtering function. MAC Address: The MAC address that you want to filter. Comment: You can add some comment for this item. 4.7 QoS Setup The QoS helps improve your network gaming performance by prioritizing applications. By default the bandwidth control are disabled and application priority is not classified automatically. In order to complete this settings, please follow the steps below. 1. Enable this function. 2. Enter the total speed or choose automatic mode. 3. Enter the IP address or MAC address user want to control. 4. Specify how to control this PC with this IP address or MAC address, priority and its up/down speed. 5. Click Apply button to add this item to control table.
11N Mini Wireless AP 29 4.8 System There are six submenus under the System menu: Time Zone Setting, Upgrade Firmware, Save/Reload Settings, Password, Reboot, Language. Click any of them, and you will be able to configure the corresponding function. 4.8.1 Time Zone You can maintain the system time by synchronizing with a public time server over the Internet.
11N Mini Wireless AP 30Time Zone select: Select your local time zone from this pull down list. NTP Server: Select the NTP Server, then the AP will get the time form the NTP Server preferentially. 4.8.2 Upgrade Firmware You can upgrade latest Firmware in this page. Firmware Version: This displays the current firmware version. 4.8.3 Save/Reload Settings You can backup or restore the system configuration in this page. Save Settings to File: Get the AP’s settings and store it in your local computer. Load Settings from File: Restore the settings from the file you backup before from your local computer, the AP will go to the former settings. Reset Settings to Default: Restore the system settings to factory default. 4.8.4 Password To ensure the AP’s security, you will be asked for your password when you access the AP’s Web-based Utility. The default user name and password is “admin”. This page will allow you to add or modify the User name and password.
11N Mini Wireless AP 31 4.8.5 Reboot You can reboot device via clicking the Apply button. 4.8.6 Language You can select correspondent language. 4.9 Status There are three submenus under the Status menu: Status, Statistics, Log. Click anyone, you will see the following status. 4.9.1 Status The Status page provides the current status information about the AP.
11N Mini Wireless AP 32 4.9.2 Statistics This page shows the packet counters for transmission and reception regarding to wireless and Ethernet networks. Refresh: Click this button to refresh the data. 4.9.3 System Log The page shows the system log. Click the “Refresh” to update the log. Click “Clear” to
11N Mini Wireless AP 33clear all shown information. Refresh: Click this button to update the log. Clear: Click this button to clear the current shown log. 4.10 Logout This page is used to logout.
11N Mini Wireless AP 34FCC RF EXPOSURE INFORMATION: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. RF Exposure: A distance of 20 cm shall be maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna.
11N Mini Wireless AP 35 EU regulatory conformance The equipment named above is confirmed to comply with the requirements setout in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2004/108/EC), Low-voltage Directive (2006/95/EC) and R&TTE (1999/5/EC). The equipment passed the test which was performed according to the following European standards: •ETSI EN 301 489-1 V1.9.2 (2011-09) •ETSI EN 301 489-17 V2.2.1 (2012-09) •ETSI EN 300 328 V1.8.1 (2012-06) •EN 62311: 2008 •EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013

Navigation menu