Intermec Technologies BTM311 BTM311 User Manual 1

Intermec Technologies Corporation BTM311 1

UserManual.wiki >

Intermec Technologies >

BTM311 User Manual >

User Manual Supplement

Contents

User Manual Supplement

PRELIMINARY DRAFT P/N 074476-001 Note: You only need to read this information if your Intermec product has a Bluetooth™ compatible module from Actiontec® Electronics. Important BTM311 Bluetooth Radio Information! Contents For Users in the United States and Canada.................................................. 2 For Users Outside of the United States and Canada..................................... 3 Pour les utilisateurs en dehors du Canada et des Etats-unis .......................... 5 Für Benutzer außerhalb von Kanada und den Vereinigten Staaten............... 6 Per gli utenti al di fuori del Canada o degli Stati Uniti................................. 7 Para Usuarios Fuera de Canada o de los Estados Unidos.............................. 8 Para Usuários Fora do Canadá ou dos Estados Unidos................................. 9 ..................................................... 9

For Users in the United States and Canada Place this supplement in your manual. This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation. Federal Communications Commission Compliance FCC Digital Emissions Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the radio or television receiving antenna. • Increase the separation between the computer equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the radio or television receiver is connected. • Consult the dealer or an experienced radio television technician for help. Changes or modifications not expressly approved by Intermec could void the user’s authority to operate this equipment. 2 PRELIMINARY DRAFT

This radio meets the FCC RF exposure guidelines when used with the Intermec accessories supplied or designated for this product. Use of other accessories may not ensure compliance with the FCC RF exposure guidelines. Specific Absorption Rate, or SAR, is a measurement of radio frequency energy. This radio is categorically exempt from routine SAR evaluation. The FCC excludes radios from routine SAR evaluation if the maximum peak power is less than 24.5 mW. The maximum peak power for this radio, as measured using corresponding FCC requirements, is 13.8 mW. Use of any other transmitting devices within 20 cm (8 in) of this radio could void the user’s authority to operate this equipment. For Users Outside of the United States and Canada Place this supplement in your manual. The Intermec product you purchased transmits and receives data using a 2.4 GHz Frequency Hopping Spread Spectrum system. Programming and configuration information for the transceivers is also provided in the host device documentation. Please check the Intermec web site for additional documentation at www.intermec.com. Hereby, Intermec Technologies Corporation declares that this Bluetooth module is in compliance with the essential requirements and other relevant provisions of R&TTE Directive (1999/5/EC). This product has been assessed to the following standards: • ETSI EN 300 328-2 v1.2.1 (2001-12) • ETSI EN 301 489-17 v1.2.1 (2002-08) • EN 60950:1992 (incl. Amdt. 1-4, 11) PRELIMINARY DRAFT 3

Country of License Intended Use Yes No Required Restrictions Details Other non-EU: China X Iceland X Liechtenstein X Norway X Switzerland X Japan X Additional EMI/RFI Compliance This device meets the Class B limit requirements of CISPR 22. Pour les utilisateurs en dehors du Canada et des Etats-unis Veuillez placer ce supplément dans votre manuel. Le produit Intermec que vous avez acheté peut transmettre et recevoir des données à l’aide d’un système d’étalement du spectre en bond de fréquence de 2,4 GHz. Les informations de programmation et de configuration pour les émetteurs-récepteurs sont également fournies dans la documentation de l’appareil hôte. Pour obtenir toute documentation supplémentaire, veuillez consulter le site web d’Intermec, à l’adresse www.intermec.com. Par la présente, Intermec Technologies Corporation déclare que ce Bluetooth radio est conforme aux exigences de base et autres exigences pertinentes de la Directive R&TTE (1999/5/EC). Ce produit a été évalué par rapport aux normes suivantes: • ETSI EN 300 328-2 v1.2.1 (2001-12) • ETSI EN 301 489-17 v1.2.1 (2002-08) • EN 60950:1992 (comprenant l’amendement 1-4, 11) La puissance de sortie du module émetteur-récepteur est de 13.8 mW. Les produits utilisant ce module sont destinés à des environnements commerciaux et industriels. Ils ne doivent pas être utilisés dans des environnements résidentiels et par des enfants. PRELIMINARY DRAFT 5

• EN 60950:1992 (einschl. Amdt. 1-4, 11) Die Ausgangsleistung des Sende-Empfangs-Moduls beträgt 13.8 mW. Die Produkte, die dieses Modul verwenden, sind für geschäftliche und industrielle Umgebungen gedacht. Sie sollten nicht in Wohngegenden und in der Nähe von Kindern verwendet werden. 0981 Das Produkt ist mit diesem Markenzeichen versehen und verwendet Radiofrequenzbreiten, die in der Europäischen Gemeinschaft überall aufeinander abgestimmt sind. Zusätzliche Elektromagnetische Störung-Übereinstimmung Dieses Gerät entspricht den Grenzbestimmungen der Klasse B von CISPR 22. Per gli utenti al di fuori del Canada o degli Stati Uniti Si prega di collocare questo supplemento nel manuale per la configurazione senza la radio. Il prodotto Intermec che avete acquistato trasmette e riceve i dati tramite un sistema a 2,4 GHz che utilizza la tecnologia FHSS (salto di frequenze, spettro esteso). La documentazione del dispositivo host fornisce inoltre le informazioni sulla programmazione e la configurazione dei transceiver. Per altre informazioni, consultate il sito web Intermec all’indirizzo www.intermec.com. Con la presente Intermec Technologies Corporation dichiara che questo Bluetooth radio è conforme ai requisiti essenziali e alle altre clausole importanti della direttiva R&TTE (1999/5/EC). Questo prodotto è stato valutato in base ai seguenti standard: • ETSI EN 300 328-2 v1.2.1 (2001-12) • ETSI EN 301 489-17 v1.2.1 (2002-08) • EN 60950:1992 (incluso Amdt. 1-4, 11) La potenza di uscita del modulo trasmittente è di 13.8 mW. I prodotti che utilizzano questo modulo sono destinati ad ambienti industriali e commerciali e non debbono essere utilizzati in ambienti residenziali e dai bambini. PRELIMINARY DRAFT 7

Para Usuários Fora do Canadá ou dos Estados Unidos Coloque este suplemento no seu manual. O produto Intermec que você comprou transmite e recebe dados usando um sistema FHSS (Espectro de Difusão de Seqüência Hopping) de 2,4 GHz . As informações sobre programação e configuração dos transceptores também são fornecidas na documentação do dispositivo hospedeiro. Consulte também o site da Intermec na web, no endereço www.intermec.com, para documentação complementar. Por este documento, a Intermec Technologies Corporation declara que o Bluetooth radio atende aos requisitos essenciais e outras condições relevantes da Diretiva R&TTE (1999/5/EC). Esse produto foi avaliado em relação aos seguintes padrões: • ETSI EN 300 328-2 v1.2.1 (2001-12) • ETSI EN 301 489-17 v1.2.1 (2002-08) • EN 60950:1992 (incluída Amdt. 1-4, 11) A potência de saída do módulo transmissor é de 13.8 mW. Os produtos que usam este módulo são destinados aos ambientes comerciais e industriais. Eles não devem ser utilizados em ambientes residenciais e por crianças. 0981 Este produto é identificado por esta logomarca e utiliza bandas de freqüência de rádio que estão harmonizadas na Comunidade Européia. Conformidades EMI/RFI Adicionais Este produto atende aos requisitos de limite Classe B do CISPR22. PRELIMINARY DRAFT 9

• ETSI EN 300 328-2 v1.2.1 (2001-12)• ETSI EN 301 489-17 v1.2.1 (2002-08)• 13.8 0981 10 PRELIMINARY DRAFT

PRELIMINARY DRAFT 11

6001 36th Avenue WestEverett, Washington 98203U.S.A.tel 425.348.2600fax 425.355.9551www.intermec.com© 2004 Intermec TechnologiesCorporation. All rights reserved. Important BTM311 Bluetooth Radio Information! *074476-001* P/N 074476-001

Navigation menu