Intermec Technologies ABTM3-3 ABTM3 Radio in 700C User Manual back let85x11

Intermec Technologies Corporation ABTM3 Radio in 700C back let85x11

Revised User Manual Part 1 of 2

P/N 072719-003  Important Radio Information! Contents For Users in the United States and Canada ...................................................................................................................................2For All 700C Radio Configurations................................................................................................................................2For 700C-802.11b Configuration...................................................................................................................................2For ABTM3 (Bluetooth-Compatible Wireless Module by Socket Communications) Configuration ...............................2For MC45 (Wireless WAN, GSM/GPRS) Configuration...............................................................................................3For SB555 (Wireless WAN, CDMA/1x) Configuration..................................................................................................3For Users Outside of the United States and Canada......................................................................................................................4For 700C-802.11b Configuration...................................................................................................................................4For ABTM3 (Bluetooth-Compatible Wireless Module by Socket Communications) Configuration ...............................5For MC45 (Wireless WAN, GSM/GPRS) Configuration...............................................................................................6Pour les utilisateurs en dehors du Canada et des Etat-unis .............................................................................................................7Pour la configuration 700C-802.11b ..............................................................................................................................7Pour la configuration ABTM3 (Module sans fil compatible avec la norme Bluetooth de Socket Communications).........8Pour la configuration MC45...........................................................................................................................................8Für Benutzer außerhalb von Kanada und den Vereinigten Staaten ................................................................................................9700C-802.11b................................................................................................................................................................9ABTM3 (Bluetooth-kompatibles Funkmodul von Socket Communications)................................................................10MC45 ..........................................................................................................................................................................10Per gli utenti al di fuori del Canada o degli Stati Uniti ................................................................................................................11Per la configurazione di 700C-802.11b.........................................................................................................................11Per la configurazione di ABTM3 (modulo wireless Bluetooth-compatibile della Socket Communications)....................11Per la configurazione di MC45 .....................................................................................................................................12Para Usuarios Fuera de Canada o de los Estados Unidos .............................................................................................................12Para configuração do 700C-802.11b.............................................................................................................................12Para configuração do ABTM3 (Módulo sem fio compatível com Bluetooth da Socket Communications) .....................13Para configuração do MC45 .........................................................................................................................................14Para Usuários Fora do Canadá ou dos Estados Unidos ................................................................................................................14Para la configuración de 700C-802.11b........................................................................................................................14Para la configuración de ABTM3 (Módulo inalámbrico compatible con Bluetooth de Socket Communications)..........15Para la configuración de MC45.....................................................................................................................................16
2 For Users in the United States and Canada Place this supplement in your manual. For All 700C Radio Configurations This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation. For 700C-802.11b Configuration This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation. Federal Communications Commission Compliance  FCC Digital Emissions Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •  Reorient or relocate the radio or television receiving antenna. •  Increase the separation between the computer equipment and receiver. •  Connect the equipment to an outlet on a circuit different from that to which the radio or television receiver is connected. •  Consult the dealer or an experienced radio television technician for help. Operation Warning: To comply with the FCC’s RF exposure requirements and minimize health hazards, the user shall not touch the antenna of this device when the device is in use. Changes or modifications not expressly approved by Intermec could void the user’s authority to operate this equipment. Industry Canada Compliance This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. This device requires a radio license unless it is used totally inside a building. (The user must obtain this license.) Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Cet appareil exige une license radio à moins d’être entièrement installé dans un bâtiment. (L’utilisateur doit obtenir cette license.) Agency Approvals This device is UL Listed. For ABTM3 (Bluetooth-Compatible Wireless Module by Socket Communications) Configuration This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada.
3 Cet appareil est conforme à la Partie 15 des règlements du FCC et à la norme RSS-210 d’Industrie Canada. Operation Warning: To comply with the FCC’s RF exposure requirements and minimize health hazards: •  The user shall not touch the antenna of this device when the device is in use. •  The user shall ensure that the device is at least 20 cm (8 in) away from their body when the transceiver is in use. Changes or modifications not expressly approved by Intermec could void the user’s authority to operate this equipment. This device requires a radio license unless it is used totally inside a building. (The user must obtain this license.) Cet appareil exige une license radio à moins d’être entièrement installé dans un bâtiment. (L’utilisateur doit obtenir cette license.) Agency Approvals This device is UL Listed. For MC45 (Wireless WAN, GSM/GPRS) Configuration This device complies with Part 24 of the FCC Rules and with RSS-133 of Industry Canada.  Cet appareil est conforme à la Partie 24 des règlements du FCC et à la norme RSS-133 d’Industrie Canada. Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to ensure compliance to RF exposure requirements. The user shall not touch the antenna while the transmitter is in use. Operation of the terminal while the unit is in the hand provides the 5 cm (2 in) distance requirement for safe operation between the antenna and the hand. Agency Approvals: See user’s guide instructions for handling, charging, and replacing batteries. Failure to follow those instructions can result in personal injury, fire, or battery explosion. For SB555 (Wireless WAN, CDMA/1x) Configuration This device complies with Parts 22 and 24 of the FCC Rules and with RSS-1383 of Industry Canada. Cet appareil est conforme aux Parties 22 et 24 des règlements du FCC et à la norme RSS-1383 d’Industrie Canada. Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to ensure compliance to RF exposure requirements. The user shall not touch the antenna while the transmitter is in use. Operation of the terminal while the unit is in the hand provides the 5 cm (2 in) distance requirement for safe operation between the antenna and the hand. Agency Approvals: See user’s guide instructions for handling, charging, and replacing batteries. Failure to follow those instructions can result in personal injury, fire, or battery explosion.
4 For Users Outside of the United States and Canada Place this supplement in your manual. For 700C-802.11b Configuration The Intermec product you purchased transmits and receives data using a 2.4 GHz Direct Sequence Spread Spectrum system. Programming and configuration information for the transceivers is also provided in the host device documentation. Please check the Intermec Web site for additional documentation at www.intermec.com. Hereby, Intermec Technologies Corporation declares that this Model 700C-802.11b is in compliance with the essential requirements and other relevant provisions of R&TTE Directive (1999/5/EC). This product has been assessed to the following standards: •  ETSI EN 300 328-2 v1.2.1 (2001-12) •  ETSI EN 301 489-17 v1.1.1 (2001-09) •  EN 60950:1992 (incl. Amdt. 1-4, 11) •  SP/DGPT/ATAS 23 (1995-02) The original Declaration of Conformity is available on the Intermec Technologies Corporation Web site at www.intermec.com. This product transmits electromagnetic waves at 2.4 GHz frequency range. It has been tested and found compliant with U.S. (OET Guide 65) and Canadian (RSS 102) RF exposure regulations. There are no regulations covering this product type in the EU at this time. The transmitter module’s output power is 89 mW. The products using this module are intended for business and industrial environments. They should not be used in residential environments and by children.  This product is marked with this logo and uses radio frequency bands that are not harmonized throughout the European Community.  The following table indicates the areas of intended use of the equipment and any known restrictions. Country of Intended Use  License       Yes No Required Restrictions Details Austria X     Belgium X     Denmark X     Finland X     France  X      X  Frequency operation restricted to 2446.5 MHz to 2483.5 MHz. Germany X     Greece X     Ireland X     Italy X     Luxembourg X      The Netherlands  X         Portugal X     Spain X     Sweden X     United Kingdom  X
5 Country of Intended Use  License       Yes No Required Restrictions Details Other non-EU:         Iceland X     Liechtenstein X      Norway X     Slovenia X     Switzerland X             Additional EMI/RFI Compliance This device meets the Class B limit requirements of CISPR 22. For ABTM3 (Bluetooth-Compatible Wireless Module by Socket Communications) Configuration The Intermec product you purchased transmits and receives data using a 2.4 GHz Frequency Hopping Spread Spectrum system. Programming and configuration information for the transceivers is also provided in the host device documentation. Please check the Intermec Web site for additional documentation at www.intermec.com. Hereby, Intermec Technologies Corporation declares that this Model 700C-ABTM3 is in compliance with the essential requirements and other relevant provisions of R&TTE Directive (1999/5/EC). This product has been assessed to the following standards: •  ETSI EN 300 328-2 v1.2.1 (2001-12) •  ETSI EN 301 489-17 v1.1.1 (2001-09) •  EN 60950:1992 (incl. Amdt. 1-4, 11) •  SP/DGPT/ATAS 23 (1995-02) The original Declaration of Conformity is available on the Intermec Technologies Corporation Web site at www.intermec.com. This product transmits electromagnetic waves at 2.4 GHz frequency range. It has been tested and found compliant with U.S. (OET Guide 65) and Canadian (RSS 102) RF exposure regulations. There are no regulations covering this product type in the EU at this time. The transmitter module’s output power is 1 mW. The products using this module are intended for business and industrial environments. They should not be used in residential environments and by children.  This product is marked with this logo and uses radio frequency bands that are not harmonized throughout the European Community.
6 The following table indicates the areas of intended use of the equipment and any known restrictions. Country of Intended Use  License       Yes No Required Restrictions Details Austria X     Belgium X     Denmark X     Finland X     France  X      X  Frequency operation restricted to 2446.5 MHz to 2483.5 MHz. Germany X     Greece X     Ireland X     Italy X     Luxembourg X      The Netherlands  X         Portugal X     Spain X     Sweden X     United Kingdom  X         Other non-EU:         Iceland X     Liechtenstein X      Norway X     Slovenia X     Switzerland X             Additional EMI/RFI Compliance This device meets the Class B limit requirements of CISPR 22. For MC45 (Wireless WAN, GSM/GPRS) Configuration The Intermec product you purchased transmits and receives data using a 900/1800/1900 MHz GSM/GPRS radio module. Programming and configuration information for the transceivers is also provided in the host device documentation. Please check the Intermec Web site for additional documentation at www.intermec.com. Hereby, Intermec Technologies Corporation declares that this Model 700C-MC45 is in compliance with the essential requirements and other relevant provisions of R&TTE Directive (1999/5/EC). This product has been assessed to the following standards: • ETSI TS 51.010 •  ETSI EN 301 489-7 v1.1.1 (2001-09) •  EN 60950:1992 (incl. Amdt. 1-4, 11) The original Declaration of Conformity is available on the Intermec Technologies Corporation Web site at www.intermec.com. This product transmits electromagnetic waves at 900/1800/1900 MHz. It has been tested and found compliant with U.S. (OET Guide 65), Canadian (RSS 102), European (EN 50360/EN 50361), and Australian/New Zealand (AS/NZA 2772.1) RF exposure regulations.
7 The transmitter module’s output power is 0.933 mW. The products using this module are intended for business and industrial environments. They should not be used in residential environments and by children.  This product is marked with this logo. Additional EMI/RFI Compliance This device meets the Class B limit requirements of CISPR 22. Pour les utilisateurs en dehors du Canada et des Etat-unis Veuillez placer ce supplément dans votre manuel. Pour la configuration 700C-802.11b Le produit Intermec que vous avez acheté peut transmettre et recevoir des données à l’aide d’un système d’étalement du spectre en séquence directe de 2,4 GHz. Les informations de programmation et de configuration pour les émetteurs-récepteurs sont également fournies dans la documentation de l’appareil hôte. Pour obtenir toute documentation supplémentaire, veuillez consulter le site Web d’Intermec, à l’adresse www.intermec.com. Par la présente, Intermec Technologies Corporation déclare que ce modèle 700C-802.11b est conforme aux exigences de base et autres exigences pertinentes de la Directive R&TTE (1999/5/EC). Ce produit a été évalué par rapport aux normes suivantes : •  ETSI EN 300 328-2 v1.2.1 (2001-12) •  ETSI EN 301 489-17 v1.1.1 (2001-09) •  EN 60950:1992 (comprenant l’amendement 1-4, 11) •  SP/DGPT/ATAS 23 (1995-02) La Déclaration de conformité originale est disponible sur le site Web d’Intermec Technologies Corporation, à l’adresse www.intermec.com. Ce produit émet des ondes électromagnétiques à une plage de fréquences de 2,4 GHz. Il a été évalué et reconnu conforme aux règlements concernant l’exposition à la radiofréquence des États-Unis (OET Guide 65) et du Canada (RSS 102). Il n’y a actuellement aucun règlement couvrant ce type de produit pour l’Union européenne. La puissance de sortie du module émetteur-récepteur est de 89 mW. Les produits utilisant ce module sont destinés à des environnements commerciaux et industriels. Ils ne doivent pas être utilisés dans des environnements résidentiels et par des enfants.  Ce produit est marqué de ce logo et il utilise des bandes de fréquence radio qui ne sont pas harmonisées sur le territoire de la Communauté européenne. Le tableau suivant répertorie les zones d’utilisation prévues pour l’équipement et les restrictions connues. Pays d’utilisation prévu  Licence      Oui Non requise Restrictions Détails Belgique X     France  X      X  La fréquence d’opération est limitée à une valeur variant entre  2 446,5 MHz et 2 483,5 MHz. Conformité additionelle à la norme EMI/RFI Cet appareil respecte les limites imposées pour la Classe B par le CISPR 22.
8 Pour la configuration ABTM3 (Module sans fil compatible avec la norme Bluetooth de Socket Communications) Le produit Intermec que vous avez acheté peut transmettre et recevoir des données à l’aide d’un système d’étalement du spectre en bond de fréquence de 2,4 GHz. Les informations de programmation et de configuration pour les émetteurs-récepteurs sont également fournies dans la documentation de l’appareil hôte. Pour obtenir toute documentation supplémentaire, veuillez consulter le site Web d’Intermec, à l’adresse www.intermec.com. Par la présente, Intermec Technologies Corporation déclare que ce modèle 700C-ABTM3 est conforme aux exigences de base et autres exigences pertinentes de la Directive R&TTE (1999/5/EC). Ce produit a été évalué par rapport aux normes suivantes : •  ETSI EN 300 328-2 v1.2.1 (2001-12) •  ETSI EN 301 489-17 v1.1.1 (2001-09) •  EN 60950:1992 (comprenant l’amendement 1-4, 11) •  SP/DGPT/ATAS 23 (1995-02) La Déclaration de conformité originale est disponible sur le site Web d’Intermec Technologies Corporation, à l’adresse www.intermec.com. Ce produit émet des ondes électromagnétiques à une plage de fréquences de 2,4 GHz. Il a été évalué et reconnu conforme aux règlements concernant l’exposition à la radiofréquence des États-Unis (OET Guide 65) et du Canada (RSS 102). Il n’y a actuellement aucun règlement couvrant ce type de produit pour l’Union européenne. La puissance de sortie du module émetteur-récepteur est de 1 mW. Les produits utilisant ce module sont destinés à des environnements commerciaux et industriels. Ils ne doivent pas être utilisés dans des environnements résidentiels et par des enfants.  Ce produit est marqué de ce logo et il utilise des bandes de fréquence radio qui ne sont pas harmonisées sur le territoire de la Communauté européenne. Le tableau suivant répertorie les zones d’utilisation prévues pour l’équipement et les restrictions connues. Pays d’utilisation prévu  Licence      Oui Non requise Restrictions Détails Belgique X     France  X      X  La fréquence d’opération est limitée à une valeur variant entre  2 446,5 MHz et 2 483,5 MHz. Conformité additionelle à la norme EMI/RFI Cet appareil respecte les limites imposées pour la Classe B par le CISPR 22. Pour la configuration MC45 Le produit Intermec que vous avez acheté peut transmettre et recevoir des données à l’aide d’un module radio GSM/GPRS de 900/1800/1900 MHz. Les informations de programmation et de configuration pour les émetteurs-récepteurs sont également fournies dans la documentation de l’appareil hôte. Pour obtenir toute documentation supplémentaire, veuillez consulter le site Web d’Intermec, à l’adresse www.intermec.com. Par la présente, Intermec Technologies Corporation déclare que ce modèle 700C-MC45est conforme aux exigences de base et autres exigences pertinentes de la Directive R&TTE (1999/5/EC). Ce produit a été évalué par rapport aux normes suivantes : • ETSI TS 51.010 •  ETSI EN 301 489-7 v1.1.1 (2001-09)
9 •  EN 60950:1992 (incl. Amdt. 1-4, 11) La Déclaration de conformité originale est disponible sur le site Web d’Intermec Technologies Corporation, à l’adresse www.intermec.com. Ce produit émet des ondes électromagnétiques à une fréquence de 900/1800/1900 MHz. Il a été évalué et reconnu conforme aux règlements concernant l’exposition à la radiofréquence des États-Unis (OET Guide 65), du Canada (RSS 102), de l’Europe (EN 50360/EN 50361) ainsi que de l’Australie et de la Nouvelle-Zélande (AS/NZA 2772.1). La puissance de sortie du module émetteur-récepteur est de 0.933 mW. Les produits utilisant ce module sont destinés à des environnements commerciaux et industriels. Ils ne doivent pas être utilisés dans des environnements résidentiels et par des enfants.  Ce produit est marqué de ce logo. Conformité additionelle à la norme EMI/RFI Cet appareil respecte les limites imposées pour la Classe B par le CISPR 22. Für Benutzer außerhalb von Kanada und den Vereinigten Staaten Legen Sie diese Ergänzung in Ihr Handbuch. 700C-802.11b Das Intermec-Produkt, das Sie gekauft haben sendet und empfängt Daten mit Hilfe eines 2,4-GHz-Direktsequenz-Spreizspektrumsystems. Dieses Produkt übermittelt elektromagnetische Wellen in einem Frequenzbereich von 2,4 GHz. Es wurde getestet und in Übereinstimmung mit U.S. (OET Anleitung 65) und kanadischen (RSS 102) RF-Bestrahlungsvorschriften befunden. Zur Zeit gibt es in der EU keine Richtlinien, die diesen Produkttyp abdecken. In der Dokumentation des Hostgerätes finden Sie außerdem Informationen zum Programmieren und Konfiguriern der Sende-Empfangs-Geräte. Weitere Hinweise erhalten Sie auf der Intermec-Website unter www.intermec.com. Hiermit erklärt Intermec Technologies Corporation, dass das Modell 700C-802.11b mit den wesentlichen Anforderungen und anderen sachdienlichen Vorschriften der R&TTE-Richtlinie (1999/5/EC) übereinstimmt. Dieses Produkt wurde gemäß der folgenden Normen bewertet: •  ETSI EN 300 328-2 v1.2.1 (2001-12) •  ETSI EN 301 489-17 v1.1.1 (2001-09) •  EN 60950:1992 (einschl. Amdt. 1-4, 11) •  SP/DGPT/ATAS 23 (1995-02) Die Originalkonformitätserklärung steht auf der Website der Intermec Technologies Corporation unter www.intermec.com zur Verfügung. Die Ausgangsleistung des Sende-Empfangs-Moduls beträgt 89 mW. Die Produkte, die dieses Modul verwenden, sind für geschäftliche und industrielle Umgebungen gedacht. Sie sollten nicht in Wohngegenden und in der Nähe von Kindern verwendet werden.  Das Produkt ist mit diesem Markenzeichen versehen und verwendet Radiofrequenzbreiten, die in der Europäischen Gemeinschaft nicht überall aufeinander abgestimmt sind. Zusätzliche Elektromagnetische Störung-Übereinstimmung Dieses Gerät entspricht den Grenzbestimmungen der Klasse B von CISPR 22.
10 ABTM3 (Bluetooth-kompatibles Funkmodul von Socket Communications) Das Intermec-Produkt, das Sie gekauft haben sendet und empfängt Daten mit Hilfe eines 2,4-GHz-Frequenzspringend-Spreizspektrumsystems. Dieses Produkt übermittelt elektromagnetische Wellen in einem Frequenzbereich von 2,4 GHz. Es wurde getestet und in Übereinstimmung mit U.S. (OET Anleitung 65) und kanadischen (RSS 102) RF-Bestrahlungsvorschriften befunden. Zur Zeit gibt es in der EU keine Richtlinien, die diesen Produkttyp abdecken. In der Dokumentation des Hostgerätes finden Sie außerdem Informationen zum Programmieren und Konfiguriern der Sende-Empfangs-Geräte. Weitere Hinweise erhalten Sie auf der Intermec-Website unter www.intermec.com. Hiermit erklärt Intermec Technologies Corporation, dass das Modell 700C- ABTM3 mit den wesentlichen Anforderungen und anderen sachdienlichen Vorschriften der R&TTE-Richtlinie (1999/5/EC) übereinstimmt. Dieses Produkt wurde gemäß der folgenden Normen bewertet: •  ETSI EN 300 328-2 v1.2.1 (2001-12) •  ETSI EN 301 489-17 v1.1.1 (2001-09) •  EN 60950:1992 (einschl. Amdt. 1-4, 11) •  SP/DGPT/ATAS 23 (1995-02) Die Originalkonformitätserklärung steht auf der Website der Intermec Technologies Corporation unter www.intermec.com zur Verfügung. Die Ausgangsleistung des Sende-Empfangs-Moduls beträgt 1 mW. Die Produkte, die dieses Modul verwenden, sind für geschäftliche und industrielle Umgebungen gedacht. Sie sollten nicht in Wohngegenden und in der Nähe von Kindern verwendet werden.  Das Produkt ist mit diesem Markenzeichen versehen und verwendet Radiofrequenzbreiten, die in der Europäischen Gemeinschaft nicht überall aufeinander abgestimmt sind. Zusätzliche Elektromagnetische Störung-Übereinstimmung Dieses Gerät entspricht den Grenzbestimmungen der Klasse B von CISPR 22. MC45 Das Intermec-Produkt, das Sie gekauft haben, sendet und empfängt Daten mit Hilfe eines 900/1800/1900 MHz GSM/GPRS-Funkmoduls. In der Dokumentation des Hostgerätes finden Sie außerdem Informationen zum Programmieren und Konfiguriern der Sende-Empfangs-Geräte. Weitere Hinweise erhalten Sie auf der Intermec-Website unter www.intermec.com. Hiermit erklärt Intermec Technologies Corporation, dass das Modell 700C-MC45 mit den wesentlichen Anforderungen und anderen sachdienlichen Vorschriften der R&TTE-Richtlinie (1999/5/EC) übereinstimmt. Dieses Produkt wurde gemäß der folgenden Normen bewertet: • ETSI TS 51.010 •  ETSI EN 301 489-7 v1.1.1 (2001-09) •  EN 60950:1992 (incl. Amdt. 1-4, 11) Die Originalkonformitätserklärung steht auf der Website der Intermec Technologies Corporation unter www.intermec.com zur Verfügung. Dieses Produkt übermittelt elektromagnetische Wellen in Frequenzbereichen von 900/1800/1900 MHz. Es wurde getestet und in Übereinstimmung mit U.S. (OET Anleitung 65), kanadischen (RSS 102), europäischen (EN 50360/EN 50361) und australischen/neuseeländischen (AS/NZA 2772.1) RF-Strahlungsvorschriften befunden. Die Ausgangsleistung des Sende-Empfangs-Moduls beträgt 0.933 mW. Die Produkte, die dieses Modul verwenden, sind für geschäftliche und industrielle Umgebungen gedacht. Sie sollten nicht in Wohngegenden und in der Nähe von Kindern verwendet werden.
11  Das Produkt ist mit diesem Markenzeichen versehen. Zusätzliche Elektromagnetische Störung-Übereinstimmung Dieses Gerät entspricht den Grenzbestimmungen der Klasse B von CISPR 22. Per gli utenti al di fuori del Canada o degli Stati Uniti  Si prega di collocare questo supplemento nel manuale. Per la configurazione di 700C-802.11b Il prodotto Intermec che avete acquistato trasmette e riceve i dati tramite un sistema a 2,4 GHz che utilizza la tecnologia DSSS (sequenza diretta, spettro esteso).  La documentazione del dispositivo host fornisce inoltre le informazioni sulla programmazione e la configurazione dei transceiver. Per altre informazioni, consultate il sito Web Intermec all’indirizzo www.intermec.com. Con la presente Intermec Technologies Corporation dichiara che questo Modello 700C-802.11b è conforme ai requisiti essenziali e alle altre clausole importanti della direttiva R&TTE (1999/5/EC). Questo prodotto è stato valutato in base ai seguenti standard: •  ETSI EN 300 328-2 v1.2.1 (2001-12) •  ETSI EN 301 489-17 v1.1.1 (2001-09) •  EN 60950:1992 (incluso Amdt. 1-4, 11) •  SP/DGPT/ATAS 23 (1995-02) La dichiarazione di conformità originale è disponibile presso il sito Web di Intermec Technologies Corporation a www.intermec.com.  Questo prodotto trasmette onde elettromagnetiche con una frequenza intorno ai 2,4 GHz. Dai collaudi ai quali è stato sottoposto è risultato conforme alle norme statunitensi (OET Guide 65) e a quelle canadesi (RSS 102) relative all’esposizione alle radiofrequenze. Attualmente non esistono norme relative a questo prodotto nell’Unione Europea. La potenza di uscita del modulo trasmittente è di 89 mW. I prodotti che utilizzano questo modulo sono destinati ad ambienti industriali e commerciali e non debbono essere utilizzati in ambienti residenziali e dai bambini.  Questo prodotto reca questo marchio ed utilizza bande di radiofrequnza che non sono armonizzate nell’ambito della Comunità Europea. Ulteriore conformità con EMI/RFI Questo dispositivo è conforme ai limiti stabiliti in CISPR 22 per la Classe B. Per la configurazione di ABTM3 (modulo wireless Bluetooth-compatibile della Socket Communications) Il prodotto Intermec che avete acquistato trasmette e riceve i dati tramite un sistema a 2,4 GHz che utilizza la tecnologia FHSS (salto di frequenze, spettro esteso). La documentazione del dispositivo host fornisce inoltre le informazioni sulla programmazione e la configurazione dei transceiver. Per altre informazioni, consultate il sito Web Intermec all’indirizzo www.intermec.com. Con la presente Intermec Technologies Corporation dichiara che questo Modello 700C- ABTM3 è conforme ai requisiti essenziali e alle altre clausole importanti della direttiva R&TTE (1999/5/EC). Questo prodotto è stato valutato in base ai seguenti standard: •  ETSI EN 300 328-2 v1.2.1 (2001-12) •  ETSI EN 301 489-17 v1.1.1 (2001-09)
12 •  EN 60950:1992 (incluso Amdt. 1-4, 11) •  SP/DGPT/ATAS 23 (1995-02) La dichiarazione di conformità originale è disponibile presso il sito Web di Intermec Technologies Corporation a www.intermec.com.  Questo prodotto trasmette onde elettromagnetiche con una frequenza intorno ai 2,4 GHz. Dai collaudi ai quali è stato sottoposto è risultato conforme alle norme statunitensi (OET Guide 65) e a quelle canadesi (RSS 102) relative all’esposizione alle radiofrequenze. Attualmente non esistono norme relative a questo prodotto nell’Unione Europea. La potenza di uscita del modulo trasmittente è di 1 mW. I prodotti che utilizzano questo modulo sono destinati ad ambienti industriali e commerciali e non debbono essere utilizzati in ambienti residenziali e dai bambini.  Questo prodotto reca questo marchio ed utilizza bande di radiofrequnza che non sono armonizzate nell’ambito della Comunità Europea. Ulteriore conformità con EMI/RFI Questo dispositivo è conforme ai limiti stabiliti in CISPR 22 per la Classe B. Per la configurazione di MC45 Il prodotto Intermec acquistato trasmette e riceve dati mediante un modulo radio GSM/GPRS a 900/1800/1900 MHz. La documentazione del dispositivo host fornisce inoltre le informazioni sulla programmazione e la configurazione dei transceiver. Per altre informazioni, consultate il sito Web Intermec all’indirizzo www.intermec.com. Con la presente Intermec Technologies Corporation dichiara che questo Modello 700C-MC45 è conforme ai requisiti essenziali e alle altre clausole importanti della direttiva R&TTE (1999/5/EC). Questo prodotto è stato valutato in base ai seguenti standard: • ETSI TS 51.010 •  ETSI EN 301 489-7 v1.1.1 (2001-09) •  EN 60950:1992 (incl. Amdt. 1-4, 11) La dichiarazione di conformità originale è disponibile presso il sito Web di Intermec Technologies Corporation a www.intermec.com.  Questo prodotto trasmette onde elettromagnetiche a 900/1800/1900 MHz. Esso è stato collaudato ed è risultato conforme alle norme statunitensi (OET Guide 65), canadesi (RSS 102), europee (EN 50360/EN 50361) e australiane/neozelandesi (AS/NZA 2772.1) relative all'esposizione alle radiofrequenze. La potenza di uscita del modulo trasmittente è di 0.933 mW. I prodotti che utilizzano questo modulo sono destinati ad ambienti industriali e commerciali e non debbono essere utilizzati in ambienti residenziali e dai bambini.  Questo prodotto reca questo marchio. Ulteriore conformità con EMI/RFI Questo dispositivo è conforme ai limiti stabiliti in CISPR 22 per la Classe B. Para Usuarios Fuera de Canada o de los Estados Unidos Por favor, coloque este suplemento dentro de su manual. Para configuração do 700C-802.11b Este producto de Intermec transmite y recibe datos por medio de un sistema de espectro ensanchado en secuencia directa de 2,4 GHz.
13 Para obtener información sobre la configuración y programación del transceptor, consulte la documentación provista con el dispositivo “host”. Para obtener documentación adicional, visite el sitio web de Intermec: www.intermec.com. Por la presente, Intermec Technologies Corporation declara que el Modelo 700C-802.11b cumple con los requisitos esenciales de acuerdo con la directiva (1999/5/EC) de R&TTE. Este producto ha sido evaluado de acuerdo con los siguientes estándares o normas: •  ETSI EN 300 328-2 v1.2.1 (2001-12) •  ETSI EN 301 489-17 v1.1.1 (2001-09) •  EN 60950:1992 (incl. Enmienda 1-4, 11) •  SP/DGPT/ATAS 23 (1995-02) La Declaración de Conformidad original está disponible en el sitio web de Intermec Technologies Corporation: www.intermec.com. Este producto transmite ondas electromagnéticas de radio en la gama de frecuencias de 2,4 GHz. Ha sido probado y se ha determinado que cumple con las reglamentaciones de los EE.UU. (OET Guide 65) y del Canadá (RSS 102), referentes a la exposición de RF. En este momento, no existen reglamentaciones que abarquen este producto en la UE. La potencia de salida del módulo transmisor es de 89 mW. Los productos que usan este módulo están destinados para uso en ambientes comerciales e industriales. No deben ser usados en ambientes residenciales o en la proximidad de niños.  Este producto está marcado con este logotipo y usa bandas de frecuencia de radio que no han sido armonizadas a lo largo de la Unión Europea. Conformidad adicional con EMI/RFI Este dispositivo cumple con los límites requeridos para la Clase B de CISPR 22. Para configuração do ABTM3 (Módulo sem fio compatível com Bluetooth da Socket Communications) Este producto de Intermec transmite y recibe datos por medio de un sistema de espectro ensanchado en lupulización de frecuencia de 2,4 GHz. Para obtener información sobre la configuración y programación del transceptor, consulte la documentación provista con el dispositivo “host”. Para obtener documentación adicional, visite el sitio web de Intermec: www.intermec.com. Por la presente, Intermec Technologies Corporation declara que el Modelo 700C- ABTM3 cumple con los requisitos esenciales de acuerdo con la directiva (1999/5/EC) de R&TTE. Este producto ha sido evaluado de acuerdo con los siguientes estándares o normas: •  ETSI EN 300 328-2 v1.2.1 (2001-12) •  ETSI EN 301 489-17 v1.1.1 (2001-09) •  EN 60950:1992 (incl. Enmienda 1-4, 11) •  SP/DGPT/ATAS 23 (1995-02) La Declaración de Conformidad original está disponible en el sitio web de Intermec Technologies Corporation: www.intermec.com. Este producto transmite ondas electromagnéticas de radio en la gama de frecuencias de 2,4 GHz. Ha sido probado y se ha determinado que cumple con las reglamentaciones de los EE.UU. (OET Guide 65) y del Canadá (RSS 102), referentes a la exposición de RF. En este momento, no existen reglamentaciones que abarquen este producto en la UE. La potencia de salida del módulo transmisor es de 1 mW. Los productos que usan este módulo están destinados para uso en ambientes comerciales e industriales. No deben ser usados en ambientes residenciales o en la proximidad de niños.
14  Este producto está marcado con este logotipo y usa bandas de frecuencia de radio que no han sido armonizadas a lo largo de la Unión Europea. Conformidad adicional con EMI/RFI Este dispositivo cumple con los límites requeridos para la Clase B de CISPR 22. Para configuração do MC45 O produto Intermec que você adquiriu transmite e recebe dados utilizando um módulo de rádio GSM/GPRS de 900/1800/1900 MHz . Para obtener información sobre la configuración y programación del transceptor, consulte la documentación provista con el dispositivo “host”. Para obtener documentación adicional, visite el sitio web de Intermec: www.intermec.com. Por la presente, Intermec Technologies Corporation declara que el Modelo 700C-MC45 cumple con los requisitos esenciales de acuerdo con la directiva (1999/5/EC) de R&TTE. Este producto ha sido evaluado de acuerdo con los siguientes estándares o normas: • ETSI TS 51.010 •  ETSI EN 301 489-7 v1.1.1 (2001-09) •  EN 60950:1992 (incl. Amdt. 1-4, 11) La Declaración de Conformidad original está disponible en el sitio web de Intermec Technologies Corporation: www.intermec.com. Este produto transmite ondas eletromagnéticas a 900/1800/1900 MHz. Ele foi testado e mostrou-se compatível com as regulamentações sobre exposição a RF dos Estados Unidos (OET Guide 65), do Canadá (RSS 102), da Europa (EN 50360/EN 50361) e da Austrália/Nova Zelândia (AS/NZA 2772.1). La potencia de salida del módulo transmisor es de 0.933 mW. Los productos que usan este módulo están destinados para uso en ambientes comerciales e industriales. No deben ser usados en ambientes residenciales o en la proximidad de niños.  Este producto está marcado con este logotipo. Conformidad adicional con EMI/RFI Este dispositivo cumple con los límites requeridos para la Clase B de CISPR 22. Para Usuários Fora do Canadá ou dos Estados Unidos Coloque este suplemento no seu manual. Para la configuración de 700C-802.11b O produto Intermec que você comprou transmite e recebe dados usando um sistema DSSS (Espectro de Difusão de Seqüência Direta) de 2,4 GHz . As informações sobre programação e configuração dos transceptores também são fornecidas na documentação do dispositivo hospedeiro. Consulte também o site da Intermec na web, no endereço www.intermec.com, para documentação complementar. Por este documento, a Intermec Technologies Corporation declara que o Modelo 700C-802.11b atende aos requisitos essenciais e outras condições relevantes da Diretiva R&TTE (1999/5/EC). Esse produto foi avaliado em relação aos seguintes padrões: •  ETSI EN 300 328-2 v1.2.1 (2001-12) •  ETSI EN 301 489-17 v1.1.1 (2001-09)
15 •  EN 60950:1992 (incluída Amdt. 1-4, 11) •  SP/DGPT/ATAS 23 (1995-02) A Declaração de Conformidade original está disponível no site da web da Intermec Technologies Corporation no endereço www.intermec.com. Este produto transmite ondas eletromagnéticas na faixa de freqüência de 2,4 GHz. Ele foi testado e aprovado quanto à sua conformidade com os regulamentos de exposição à RF dos EUA (OET Guide 65) e do Canadá (RSS 102). Não existem regulamentos cobrindo esse tipo de produto atualmente na UE. A potência de saída do módulo transmissor é de 89 mW. Os produtos que usam este módulo são destinados aos ambientes comerciais e industriais. Eles não devem ser utilizados em ambientes residenciais e por crianças.  Este produto é identificado por esta logomarca e utiliza bandas de freqüência de rádio que não estão harmonizadas na Comunidade Européia. Conformidades EMI/RFI Adicionais Este produto atende aos requisitos de limite Classe B do CISPR22. Para la configuración de ABTM3 (Módulo inalámbrico compatible con Bluetooth de Socket Communications) O produto Intermec que você comprou transmite e recebe dados usando um sistema FHSS (Espectro de Difusão de Seqüência Hopping) de 2,4 GHz . As informações sobre programação e configuração dos transceptores também são fornecidas na documentação do dispositivo hospedeiro. Consulte também o site da Intermec na web, no endereço www.intermec.com, para documentação complementar. Por este documento, a Intermec Technologies Corporation declara que o Modelo 700C- ABTM3 atende aos requisitos essenciais e outras condições relevantes da Diretiva R&TTE (1999/5/EC). Esse produto foi avaliado em relação aos seguintes padrões: •  ETSI EN 300 328-2 v1.2.1 (2001-12) •  ETSI EN 301 489-17 v1.1.1 (2001-09) •  EN 60950:1992 (incluída Amdt. 1-4, 11) •  SP/DGPT/ATAS 23 (1995-02) A Declaração de Conformidade original está disponível no site da web da Intermec Technologies Corporation no endereço www.intermec.com. Este produto transmite ondas eletromagnéticas na faixa de freqüência de 2,4 GHz. Ele foi testado e aprovado quanto à sua conformidade com os regulamentos de exposição à RF dos EUA (OET Guide 65) e do Canadá (RSS 102). Não existem regulamentos cobrindo esse tipo de produto atualmente na UE. A potência de saída do módulo transmissor é de 1 mW. Os produtos que usam este módulo são destinados aos ambientes comerciais e industriais. Eles não devem ser utilizados em ambientes residenciais e por crianças.  Este produto é identificado por esta logomarca e utiliza bandas de freqüência de rádio que não estão harmonizadas na Comunidade Européia. Conformidades EMI/RFI Adicionais Este produto atende aos requisitos de limite Classe B do CISPR22.
Para la configuración de MC45 El producto de Intermec adquirido transmite y recibe datos utilizando un módulo de radio GSM/GPRS de 900/1800/1900 MHz. As informações sobre programação e configuração dos transceptores também são fornecidas na documentação do dispositivo hospedeiro. Consulte também o site da Intermec na web, no endereço www.intermec.com, para documentação complementar. Por este documento, a Intermec Technologies Corporation declara que o Modelo 700C-MC45 atende aos requisitos essenciais e outras condições relevantes da Diretiva R&TTE (1999/5/EC). Esse produto foi avaliado em relação aos seguintes padrões: • ETSI TS 51.010 •  ETSI EN 301 489-7 v1.1.1 (2001-09) •  EN 60950:1992 (incl. Amdt. 1-4, 11) A Declaração de Conformidade original está disponível no site da web da Intermec Technologies Corporation no endereço www.intermec.com. Este producto transmite ondas electromagnéticas en 900/1800/1900 MHz. Ha sido evaluado y cumple con las regulaciones de exposición a RF (radio frecuencias) de EE.UU. (OET Guide 65), Canadá (RSS 102), Comunidad Europea (EN 50360/EN 50361) y Australia-Nueva Zelanda (AS/NZA 2772.1). A potência de saída do módulo transmissor é de 0.933 mW. Os produtos que usam este módulo são destinados aos ambientes comerciais e industriais. Eles não devem ser utilizados em ambientes residenciais e por crianças.  Este produto é identificado por esta logomarca. Conformidades EMI/RFI Adicionais Este produto atende aos requisitos de limite Classe B do CISPR22.          700 Series Color Mobile Computer Radio Manual Supplement *072719-003* *072719-003*
User’s Manual700 Series ColorMobile Computer
700 Series ColorMobile ComputerUser’s Manual
iiSNOTICE The information contained herein is proprietary and is provided solely for the purpose of allowingcustomers to operate and service Intermec manufactured equipment and is not to be released,reproduced, or used for any other purpose without written permission of Intermec.DisclaimerofWarranties.Thesamplesourcecodeincludedinthisdocumentispresentedforreference only. The code does not necessarily represent complete, tested programs. The code isprovided “ASISWITHALLFAULTS.”ALLWARRANTIESAREEXPRESSLYDISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE.We welcome your comments concerning this publication. Although every effort has been made tokeep it free of errors, some may occur. When reporting a specific problem, please describe itbriefly and include the book title and part number, as well as the paragraph or figure number andthepagenumber.Send your comments to:Intermec Technologies CorporationPublications Department550 Second Street SECedar Rapids, IA 52401ANTARES, INTERMEC, NORAND, NOR*WARE, PEN*KEY, ROUTEPOWER,TRAKKER, and TRAKKER ANTARES are registered trademarks and ArciTech, ENTERPRISEWIRELESS LAN, i-gistics, INCA, Mobile Framework, MobileLAN, TE 2000, UAP, andUNIVERSAL ACCESS POINT are trademarks of Intermec Technologies Corporation.2002 Intermec Technologies Corporation. All rights reserved.AcknowledgmentsActiveSync,ActiveX,Microsoft,MS,MS-DOS,Outlook,Pocket Outlook,Pocket PC,Windows,Windows NT,andtheWindows logo are registered trademarks and MSDN,SQL Server,VisualBasic,Visual C++,andWindows for Pen are trademarks of Microsoft Corporation in the UnitedStates and/or other countries. Microsoft products are licensed to OEMs by Microsoft Licensing,Inc., a wholly owned subsidiary of Microsoft Corporation.Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.CDMA2000 is a trademark of the Telecommunications Industry Association (TIA).GSM is a registered trademark of the GSM Association.Microclean II is a registered trademark of Foresight International.MultiMediaCard is a trademark of Infineon Technologies AG, Germany, and is licensed toMMCA (MultiMediaCard Association).SanDisk is a trademark of SanDisk Corporation.Siemens is a registered trademark of Siemens AG. Siemens product names are either trademarks orregistered trademarks of Siemens or Siemens AG.Sprint is a registered trademark of Sprint Communications Company L.P.This product includes software developed by the OpenSSL Project for use in the OpenSSLToolkit. (http://www.openssl.org/)This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)
Contentsiii700 Series Color Mobile Computer User’s ManualContentsBefore You Begin xv....................................................................Warranty Information xv...................................................Safety Summary xv........................................................Warnings, Cautions, and Notes xvi...........................................About This Manual xvi....................................................Format Conventions for Input From a Keyboard or Keypad xvii......................Related Publications xviii...................................................Global Services and Support xviii.............................................Web Support xviii........................................................IntroductionAbout the 700 Series Color Mobile Computer 2...............................................Audio System 2...........................................................Speaker 2...................................................Internal Microphone 2........................................External Headset Jack 2........................................Battery 2................................................................Low Battery Shutdown 3.......................................System Status Maintained 4....................................CAB Files Within 700C Software Tools CD 4...................................Modem Support 4.........................................................Network Support 4........................................................Removeable Card Support 5.................................................CompactFlash Cards 5........................................SecureDigital Cards 5.........................................MultiMediaCards 5...........................................Software Build Version 5....................................................What’ s New 6.........................................................................1
Contentsiv 700 Series Color Mobile Computer User’s ManualPocket PC 2002Introduction 8.........................................................................Premium versus Professional Editions 8......................................................Where to Find Information 10............................................................Basic Skills 11.........................................................................Buttons and Stylus 11......................................................Today Screen 11..........................................................Programs 13.............................................................Navigation Bar and Command Bar 14.........................................Pop-up Menus 15.........................................................Notifications 15..........................................................Enter Information on Your 700 Series Computer 16...............................Typing With the Soft Keyboard 17...............................Using Block Recognizer 17.....................................Using Letter Recognizer 18.....................................Using Transcriber 18..........................................Selecting Typed Text 18........................................Writing on the Screen 19....................................................Selecting the Writing 19.......................................Converting Writing to Text 20..................................Drawing on the Screen 22...................................................Creating a Drawing 22........................................Selecting a Drawing 22........................................Recording a Message 23....................................................Creating a Recording 23.......................................Using My Text 24.........................................................Finding and Organizing Information 25........................................Customizing Your 700 Series Computer 26......................................Adjusting Settings 26.........................................Adding or Removing Programs 26................................Microsoft ActiveSync 29.................................................................Microsoft Pocket Outlook 31.............................................................Calendar: Scheduling Appointments and Meetings 31.............................Creating an Appointment 32....................................Using the Summary Screen 33..................................Creating Meeting Requests 33...................................Scheduling a Meeting 33.......................................Contacts: Tracking Friends and Colleagues 34...................................Creating a Contact 34.........................................Finding a Contact 35.........................................Using the Summary Screen 36..................................Tasks: Keeping a To Do List 37...............................................Creating a Task 38...........................................Using the Summary Screen 39..................................Notes: Capturing Thoughts and Ideas 40.......................................Creating a Note 41...........................................2
Contentsv700 Series Color Mobile Computer User’s ManualInbox: Sending and Receiving E-mail Messages 42................................Synchronizing E-mail Messages 42...............................Connecting Directly to an E-mail Server 42........................Using the Message List 43......................................Composing Messages 45.......................................Managing E-mail Messages and Folders 46.........................Folder Behavior With a Direct Connection to an E-mail Server 46.......Companion Programs 47................................................................Pocket Word 47...........................................................Creating a Document 47.......................................Typi ng Mode 49.............................................Writing Mode 50............................................Drawing Mode 51............................................Recording Mode 51...........................................Pocket Excel 52...........................................................Creating a Workbook 52.......................................Tips for Working in Pocket Excel 53..............................MSN Messenger 53........................................................Setting Up 54...............................................Working with Contacts 54.....................................Chatting with Contacts 55.....................................Windows Media Player for Pocket PC 57.......................................Microsoft Reader 58.......................................................Getting Books on Your 700 Series Computer 58.....................Using the Library 59..........................................Reading a Book 60...........................................Using Reader Features 61......................................Removing a Book 61..........................................Pocket Internet Explorer 62...............................................................The Mobile Favorites Folder 62...............................................Favorite Links 62..........................................................Mobile Favorites 62........................................................Using AvantGo Channels 64.................................................Using Pocket Internet Explorer 65.............................................Viewing Mobile Favorites and Channels 66........................Browsing the Internet 66.......................................Getting Connected 67...................................................................Transferring Items Using Infrared 67...........................................Sending Information 67.......................................Receiving Information 67......................................Connecting to an Internet Service Provider 68...................................Creating a Modem Connection to an ISP 68.......................Creating an Ethernet Connection to an ISP 69......................Connecting to Work 70.....................................................Creating a Modem Connection to Work 70........................Creating an Ethernet Connection to Work 71.......................Ending a Connection 72....................................................Connecting Directly to an E-mail Server 72.....................................Setting Up an E-mail Service 73..............................................
Contentsvi 700 Series Color Mobile Computer User’s ManualInstalling ApplicationsPackaging an Application 76..............................................................Installing Applications 76................................................................Using Microsoft ActiveSync 77...............................................Using the FTP Server 78....................................................Using the Application Manager in Unit Manager 78...............................Using a Storage Card 78....................................................Copying to a CompactFlash Card 78.............................Copying to a SecureDigital Storage Card 79........................Updating the System Software 79..........................................................Application Migration 80................................................................Cabinet File Installation 82...............................................................Network SupportCORE 84............................................................................Network Adapters 85...................................................................Ethernet Communications 86................................................802.11b Communications 87................................................Profiles 87..................................................Import/Export 96............................................Scan List 97.................................................Network Selection APIs 98.....................................Function Summary 101.......................................802.11b Radio CORE Module 107..............................WWAN Radio Options 110.................................................GSM/GPRS 110.............................................CDMA/1xRTT SB555 110....................................WAN Radio CORE Module 111................................AT Command Interface 115....................................Wireless Printing 120......................................................Documentation 120..........................................Bluealps CORE Module 120....................................AutoIP/DHCP 122.....................................................................SNMP Configuration 123................................................................The Focus was “Simple” 123.................................................Using SNMP 123.........................................................Retrieval of Management Information 124......................................An Early Approach to Getting More than One Item at a Time 124...................Conclusion 124...........................................................SNMP Configuration on the 700 Series Computer 125............................Management Information Base 125..............................Object Identifiers 126.........................................Configuring with SNMP 126...................................34
Contentsvii700 Series Color Mobile Computer User’s ManualPrinter SupportPrinting ASCII 128.....................................................................Directly to a Port 128......................................................Directly to a Generic Serial Port 128...........................................IrDA Printer Driver 128.................................................................NPCP Printer Driver 129................................................................About NPCP 129.........................................................NPCP Driver Installation and Removal 129.....................................Opening the NPCP Driver 130..............................................Closing the NPCP Driver 130...............................................Reading from the NPCP Driver 130...........................................Writing to the NPCP Driver 130.............................................NPCP Driver I/O Controls 131..............................................NPCP Printer Communications 132...........................................Sample Code 132.........................................................NPCP Error Codes 133....................................................O’ Neil Printer Driver 134...............................................................DTR Driver Installation and Removal 134......................................Opening the DTR Driver 135...............................................Closing the DTR Driver 135................................................Writing to the DTR Driver 135..............................................DTR Printer Communications 135............................................Scanner SupportScanner Control and Data Transfer 138.....................................................Automatic Data Collection COM Interfaces 138..............................................Multiple ADC COM Object Support 139......................................How to Create and Use the ADC COM Interfaces 140............................Read-Ahead Bar Code Data Access 140............................Grid Data Filtering 141........................................Filter Expression Values 142....................................Editing Expression Values 144..................................ADC Connection 145.........................................2D Imager Overview 146...................................................Data Collection Features 146...................................Image Acquisition Features 147..................................Create and Delete ADC COM Object Functions 149.............................ITCDeviceOpen 149.........................................ITCDeviceClose 150..........................................56
Contentsviii 700 Series Color Mobile Computer User’s ManualIADC Functions 151......................................................IADC::CancelReadRequest 152.................................IADC::Initialize 153..........................................IADC::QueryAttribute 154....................................IADC::QueryData 155........................................IADC::Read 156.............................................IADC::SetAttribute 157.......................................IBarCodeReaderControl Functions 159........................................IBarCodeReaderControl::CancelReadRequest 160...................IBarCodeReaderControl::ControlLED 161.........................IBarCodeReaderControl::Initialize 162............................IBarCodeReaderControl::IssueBeep 163...........................IBarCodeReaderControl::QueryAttribute 164.......................IBarCodeReaderControl::Read 165...............................IBarCodeReaderControl::SetAttribute 167.........................IBarCodeReaderControl::TriggerScanner 171.......................IS9CConfig Functions 172..................................................IS9CConfig::GetCodabar 173...................................IS9CConfig::SetCodabar 174...................................Codabar Default Settings 175...................................Codabar Enumerations 175....................................IS9CConfig::GetCode39 176...................................IS9CConfig::SetCode39 177....................................Code 39 Default Settings 177...................................Code 39 Enumerations 178....................................IS9CConfig::GetCode93 179...................................IS9CConfig::SetCode93 179....................................Code 93 Default Settings 179...................................Code 93 Enumerations 180....................................IS9CConfig::GetCode128 180..................................IS9CConfig::SetCode128 181...................................Code 128/EAN 128 Default Settings 181..........................Code 128 Enumerations 182...................................IS9CConfig::GetI2of5 183.....................................IS9CConfig::SetI2of5 184......................................Interleaved 2 of 5 Default Settings 184............................Interleaved 2 of 5 Enumerations 185..............................IS9CConfig::GetMatrix2of5 185................................IS9CConfig::SetMatrix2of5 186.................................Matrix 2 of 5 Default Settings 186...............................Matrix 2 of 5 Enumerations 186.................................IS9CConfig::GetMSI 187......................................IS9CConfig::SetMSI 187......................................MSI Default Settings 187......................................MSI Enumerations 188........................................IS9CConfig::GetPDF417 188..................................IS9CConfig::SetPDF417 189...................................PDF 417 Default Settings 190..................................PDF 417 Enumerations 190....................................IS9CConfig::GetPlessey 192....................................IS9CConfig::SetPlessey 192....................................Plessey Default Settings 193....................................Plessey Enumerations 193......................................IS9CConfig::GetStandard2of5 194...............................IS9CConfig::SetStandard2of5 195...............................
Contentsix700 Series Color Mobile Computer User’s ManualStandard 2 of 5 Default Settings 196..............................Standard 2 of 5 Enumerations 196...............................IS9CConfig::GetTelepen 197...................................IS9CConfig::SetTelepen 197....................................Telepen Default Settings 197....................................Telepen Enumerations 198.....................................IS9CConfig::GetUpcEan 198...................................IS9CConfig::SetUpcEan 200...................................UPC/EAN Default Settings 201.................................UPC/EAN Enumerations 201...................................IS9CConfig2 Functions 204.................................................IS9CConfig2::GetCode11 205..................................IS9CConfig2::SetCode11 205...................................Code 11 Default Settings 206...................................Code 11 Enumerations 206....................................IS9CConfig2::GetCustomSymIds 207............................IS9CConfig2::SetCustomSymIds 208.............................Custom Identifier Assignments 209..............................Custom Identifier Default Settings 210............................Custom Identifier Example 210.................................IS9CConfig2::GetGlobalAmble 211..............................IS9CConfig2::SetGlobalAmble 212..............................Postamble and Preamble Defaults 212.............................IS9CConfig2::GetPDF417Ext 213...............................IS9CConfig2::SetPDF417Ext 213...............................PDF 417 Extended: Micro PDF 417 Default Settings 214.............IS9CConfig2::GetSymIdXmit 214...............................IS9CConfig2::SetSymIdXmit 214................................Symbology ID Transmission Option 215..........................IS9CConfig3 Functions 216.................................................ISCP Commands 216.........................................ISCP::GetConfig 217.........................................ISCP::SetConfig 218..........................................AIM Symbology ID Defaults 219.............................................IImage Interface 221....................................................................IImage::ReadSigCapBuffer 221...............................................IImage::ReadSigCapFile 224.................................................IImage::ReadImage 225....................................................IImage::CancelReadImage 226...............................................IImage::Start 226.........................................................IImage::Stop 227..........................................................IImage::Open 227.........................................................IImage::Close 228.........................................................Data Collection Configuration 229.........................................................
Contentsx 700 Series Color Mobile Computer User’s ManualTethered Scanner 230...................................................................Enabling and Disabling 230.................................................Changing Comm Settings 231...............................................Tethered Scanner 231.........................................Sabre 1551E or 1553 Tethered Scanner 232........................Welch Allyn 1470 Imager Settings 232............................Error Message 232.........................................................Scanner Cabling 232...................................................Limitations and Capabilities 233..........................................ProgrammingCreating CAB Files 236.................................................................Creating Device-Specific CAB Files 236........................................Creating an .INF File 236......................................Sample .INF File 245.........................................Using Installation Functions in SETUP.DLL 248.................................After the CAB File Extraction 248............................................Creating CAB Files with CAB Wizard 249......................................Troubleshooting the CAB Wizard 250.........................................FTP Server 251........................................................................Configurable Parameters Via the Registry Editor 252..............................BlockSize 252...............................................DeviceName 253.............................................DeviceURL 253.............................................IDNATarget 254.............................................ManifestName 254...........................................PauseAtStartup 255...........................................Root 255...................................................Transferring Files Over TCP/IP Networks 256...................................Stopping the FTP Server from Your Application 260...............................Autostart FTP 260........................................................Full Screen 262........................................................................Kernel I/O Controls 264.................................................................IOCTL_HAL_GET_DEVICE_INFO 264.....................................IOCTL_HAL_ITC_READ_PARM 265.......................................IOCTL_HAL_ITC_WRITE_SYSPARM 270...................................IOCTL_HAL_GET_DEVICEID 272.........................................IOCTL_HAL_GET_OAL_VERINFO 273.....................................IOCTL_HAL_GET_BOOTLOADER_VERINFO 274...........................IOCTL_HAL_WARMBOOT 275............................................IOCTL_HAL_COLDBOOT 275............................................IOCTL_HAL_GET_RESET_INFO 276.......................................IOCTL_HAL_GET_BOOT_DEVICE 277.....................................IOCTL_HAL_REBOOT 278...............................................IOCTL_PROCESSOR_INFORMATION 279..................................IOCTL_GET_CPU_ID 280................................................7
Contentsxi700 Series Color Mobile Computer User’s ManualReboot Functions 280...................................................................IOCTL_HAL_REBOOT 280...............................................IOCTL_HAL_COLDBOOT 280............................................IOCTL_HAL_WARMBOOT 280............................................Remapping the Keypad 281..............................................................Unshifted Plane 281.......................................................Gold Plane 281...........................................................Alpha Plane 281..........................................................Key Values 282...........................................................How Key Values Are Stored in Registry 282.....................................Change Notification 283....................................................Advanced Keypad Remapping 283............................................Scan Codes 283...........................................................Sample View of Registry Keys 284............................................Control Panel AppletsConfiguration Parameters 286.............................................................Changing a Parameter Setting 286............................................About Configuration Parameters 287..........................................Data Collection Control Panel Applet 288...................................................Symbologies 289..........................................................Code 39 290................................................Standard 2 of 5 291...........................................Codabar 292................................................UPC/EAN 293..............................................Code 93 294................................................Code 128 295...............................................Plessey 298.................................................MSI 299...................................................PDF 417 300...............................................Interleaved 2 of 5 303.........................................Matrix 2 of 5 304............................................Telepen 305.................................................Code 11 306................................................QR Code 307...............................................Data Matrix 308.............................................Symbology Options 309....................................................Symbology ID 309...........................................Prefix 315..................................................Suffix 316..................................................Beeper/LED 317..........................................................Beeper Volume 318...........................................Beeper Frequency 320.........................................Good Read Beeps 321.........................................Good Read Beep Duration 322..................................Imager 323..............................................................Aimer LED duration 323......................................Image Dimension 324.........................................A
Contentsxii 700 Series Color Mobile Computer User’s ManualVirtual Wedge 325........................................................Virtual Wedge 325...........................................Preamble 326...............................................Postamble 327...............................................Grid 328...................................................Code Page 329..............................................SNMP Control Panel Applet 330..........................................................Security 331.............................................................Read Only Community 331....................................Read/Write Community 332....................................Read Encryption 333.........................................Write Encryption 334.........................................Encryption Key 335..........................................Tr a p s 336...............................................................Authentication 336...........................................Threshold 337...............................................Identification 338.........................................................Contact 338................................................Name 339..................................................Location 340................................................Unit Information Control Panel Applet 341..................................................Versions 342.............................................................Battery Status 343.........................................................CAB Files 344............................................................Unit ManagerData Collection 348....................................................................Symbologies 348..........................................................Symbology ID 349........................................................Beeper/LED 349..........................................................Imager 350..............................................................Virtual Wedge 350........................................................SNMP 350...........................................................................Security 350.............................................................Tr a p s 351...............................................................Identification 351.........................................................Unit 352.............................................................................Date/Time 352...........................................................Backlight Timeout 353.....................................................Key Clicks 354...........................................................Automatic Shutoff 355.....................................................Volume 356..............................................................Using Reader Commands 357.............................................................Change Configuration 357..................................................Set Time and Date 358.....................................................B
Contentsxiii700 Series Color Mobile Computer User’s ManualBar CodesBar Code Symbologies 360...............................................................UPC 362................................................................EAN 362................................................................Codabar 362.............................................................Code 11 363.............................................................Code 39 363.............................................................Encoded Code 39 (Concatenation) 363........................................Encoded Code 39 (Full ASCII) 363...........................................Code 93 364.............................................................Code 128 364............................................................I 2 of 5 (Interleaved) 366...................................................S2of5(Standard2of5) 366................................................Plessey 367..............................................................MSI Code (Variant of Plessey) 367............................................Bar Code Labels 368....................................................................Audio Volume 368........................................................Automatic Shutoff 369.....................................................Backlight Timeout 369.....................................................Key Clicks 370...........................................................Virtual Wedge Grid, Preamble, Postamble 371...................................Grid 371...................................................Preamble 371...............................................Postamble 371...............................................IIndexClasses and Functions 374...............................................................General Index 377......................................................................Files Index 398........................................................................C
Contentsxiv 700 Series Color Mobile Computer User’s Manual
Before You Beginxv700 Series Color Mobile Computer User’s ManualBefore You BeginThis section introduces you to standard warranty provisions, safetyprecautions, warnings and cautions, document formatting conventions,and sources of additional product information. A documentation roadmapis also provided to guide you in finding the appropriate information.Warranty InformationTo receive a copy of the standard warranty provision for this product, con-tact your local Intermec support services organization. In the U.S. call1-800-755-5505, and in Canada call 1-800-668-7043. If you live outsideof the U.S. or Canada, you can find your local Intermec support servicesorganization on the Intermec Web site at www.intermec.com.Note: Opening this product may void the warranty. The internal workingsof this product can only be accessed by Intermec service personnel. Radioreplacements and upgrades require Intermec service personnel.Safety SummaryYour safety is extremely important. Follow these guidelines:SRead and follow all warnings and cautions in this book before handlingand operating Intermec equipment. You can be seriously injured, andequipment and data can be damaged if you do no follow the safetywarnings and cautions.SDo not repair or adjust energized equipment alone under any circum-stances. Someone capable of providing first aid must always be presentforyoursafety.SAlways obtain first aid or medical attention immediately after an injury.Never neglect an injury, no matter how slight it seems.SBegin resuscitation immediately if someone is injured and stops breath-ing. Any delay could result in death. To work on or near high voltage,you should be familiar with approved industrial first aid methods.SNever work on energized equipment unless authorized by a responsibleauthority. Energized electrical equipment is dangerous. Electrical shockfrom energized equipment can cause death. If you must perform autho-rized emergency work on energized equipment, be sure that you complystrictly with approved safety regulations.
Before You Beginxvi 700 Series Color Mobile Computer User’s ManualWarnings, Cautions, and NotesThe warnings, cautions, and notes in this manual use this format:A warning alerts you of an operating procedure, practice, condition, orstatement that must be strictly observed to avoid death or serious injuryto the persons working on the equipment.Attention Danger: Un avertissement vous avertit d’une procédure defonctionnement, d’une méthode, d’un état ou d’un rapport qui doit êtrestrictement respecté pour éviter l’occurrence de mort ou de blessuresgraves aux personnes manupulant l’équipement.A caution alerts you to an operating procedure, practice, condition, orstatement that must be strictly observed to prevent equipment damage ordestruction, or corruption or loss of data.Attention: Une précaution vous avertit d’une procédure defonctionnement, d’une méthode, d’un état ou d’un rapport qui doit êtrestrictement respecté pour empêcher l’endommagement ou la destructionde l’équipement, ou l’altération ou la perte de données.Note: Notes are statements that either provide extra information about atopic or contain special instructions for handling a particular condition orset of circumstances.About This ManualThe 700 Series Color Mobile Computer User’ s Manual provides you withinformation about the features of the 700 Series Color Mobile Computerand how to configure, troubleshoot, and support it. You must be familiarwith your host PC, your network, and your other Intermec equipment.SChapter 1 — IntroductionIntroduces the 700 Series Color Mobile Computer.SChapter 2 — Pocket PC 2002Introduces the Pocket PC 2002 operating system from Microsoft Cor-poration, and explains how to use its Outlook, ActiveSync, Internet Ex-plorer, and other companion programs.SChapter 3 — Installing ApplicationsProvides methods to install applications and CAB files, also covers ap-plication migration.SChapter 4 — Network SupportIntroduces the CORE application, network adapters such as Ethernet,802.11b radios, GSM/GPRS or CDMA/1xRTT embedded radio mod-ules, and wireless printing equipped with a Bluetooth module, SNMPconfiguration, and Network Selection APIs.SChapter 5 — Printer SupportProvides information on printing ASCII to either a port or to a genericserial port, and on working with IrDA, NPCP, and O’ Neil printer driv-ers.
Before You Beginxvii700 Series Color Mobile Computer User’s ManualSChapter 6 — Scanner SupportProvides Automatic Data Collection COM and IImage interfaces andlists settings via Data Collection parameters.SChapter 7 — ProgrammingProgramming information that includes creating CAB files, the FTPServer, Full Screen, Kernel I/O Control Functions, Reboot Functions,and remapping the keypad.SAppendix A — Control Panel AppletsContains detailed information about the Data Collection, SNMP, andUnit Information control panel applets.SAppendix B — Unit ManagerDescribes how to configure some parameters via the Unit Manager ap-plication and includes reader commands.SAppendix C — Bar CodesDescribes some of the more common bar code symbologies and includesbar code labels that can be scanned to configure your 700 Series Com-puter.Format Conventions for Input From a Keyboard or KeypadThis table describes the formatting conventions for input from PC or hostcomputer keyboards and device keypads.Format ConventionsConvention DescriptionSpecial text Shows the command as you should enter it into the device.Italic text Indicates a variable that you must replace the parameter with a value.Bold text Indicates the keys you must press on a PC or host computer key-board. For example, “press Enter” means you press the key labeled“Enter” on the PC or host computer keyboard.where This word introduces a list of parameters and explains the values youcan specify for them.
Before You Beginxviii 700 Series Color Mobile Computer User’s ManualRelated PublicationsTo order printed versions of the Intermec manuals, contact your local In-termec representative or distributor. Following are related Intermecmanuals, CD-ROMs, and part numbers (P/N). For other versions andlanguages, consult your Intermec sales representative.S700 Series Color Mobile Computer Quick Start Guide(P/N: 962-054-053)S700 Color Recovery CD PPC 2002 Professional Edition WWE(P/N: 235-100-001 Kit)S700 Color Recovery CD PPC 2002 Premium Edition WWE(P/N: 235-101-001 Kit)S700 Series Color Software Tools CD (P/N: 235-099-001)SWindows 95 and Windows CE Configuration Utilities Reference Manual(P/N: 978-054-010)Global Services and SupportSelect any of the following services available from Intermec TechnologiesCorporation:SFactory Repair and On-site RepairTo request a return authorization number for one of our authorized ser-vice centers, or to request an on-site repair technician, call1-800-755-5505, then select option 1.STechnical SupportFor technical support on your Intermec product, call 1-800-755-5505,then select option 2.SService Contract StatusTo inquire about an existing contract, or to renew a contract, call1-800-755-5505, then select option 3.SSchedule Site Surveys or InstallationsTo schedule a site survey, or to request a product or system installation,call 1-800-755-5505, then select option 4.Web SupportVisit our Web site at http://www.intermec.com to download many of ourcurrent manuals in PDF format.Visit our technical knowledge base (Knowledge Central) athttp://intermec.custhelp.com to review technical information or to requesttechnical help for all Intermec products.
1700 Series Color Mobile Computer User’s ManualIntroduction1This chapter introduces the 700 Series Color (700C) Mobile Computer,developed by Intermec Technologies Corporation to enhance wireless con-nectivity needs.
IntroductionChapter —12 700 Series Color Mobile Computer User’s ManualAbout the 700 Series Color Mobile ComputerAudio SystemSpeakerA speaker capable of variable volume levels is located on the back of thecomputer. This speaker has a transducer volume of 85 dB min at 10 CMand a frequency range of 1-8 KHz.Internal MicrophoneThe internal microphone is located on the bottom of the unit to the left ofthe hirose connector.External Headset JackThe external headset jack connects a mono headset to your mobile com-puter for use in noisy environments. The jack is a 2.5 mm, three-conduc-tor jack, with autosensing of the headset jack insertion which disables theinternal speaker and microphone. The external headset jack is located onthe bottom of the mobile computer to the right of the hirose connector.BatteryThe 700 Series Computer comes equipped with a nominal 14.4Watt-hour, 7.2V (two 2000 mAh cells), replaceable Lithium-Ion (LiIon)battery. To view the status of this battery from the 700 Series Computer,tap Start →Settings →the System tab →the Power icon to view thecurrent status of both the main battery and the backup battery. Tap ok toexit this information.
Introduction—Chapter 13700 Series Color Mobile Computer User’s ManualNote: The Unit Information control panel applet is only available in the700 Series Computer if Intermec Content is enabled, the Plus region isenabled and installed, and a laser scanner is installed.You can also view the battery status for the 700 Series Computer byaccessing the Unit Information control panel applet. Tap the UnitInformation icon, then tap the Battery Status tab to view the currentstatus. Tap ok to exit this information.Low Battery ShutdownIf your computer shuts down because of low battery conditions, your com-puter will not operate. This is done to ensure that data is protected. Al-though the battery will protect the data against loss for several hours, youshould connect your computer to a power source when you first detect alow battery condition.Your computer contains an internal super capacitor, a temporary powerstorage device, that protects data for up to ten minutes. This is to give youtime to replace the main battery pack before that data is lost. Be sure to putthe computer in a suspend mode before doing so.The battery power fail level is set so that after the system shuts down in alow battery condition, there is still sufficient charge to allow the unit toremain configured, keep proper time, and maintain DRAM (DynamicRandom Access Memory) for at least 72 hours at room temperature if themain battery remains in the mobile computer. The configuration and timeare lost if:SThe battery discharges beyond this level.SThe battery is removed when the computer is not in suspend mode.SA cold reset is performed on the computer.
IntroductionChapter —14 700 Series Color Mobile Computer User’s ManualSystem Status MaintainedSystem status is maintained in “suspend” when the main battery is re-moved:S10 minutes for 64 MB low-power chipsS5 minutes for 128 MB low-power chipsCAB Files Within 700C Software Tools CDIf you leave the default destination while you install the “\700 ColorMgmt Tools” directory onto your desktop PC, then “C:\Intermec\Inter-mec 700 Color Mgmt Tools\Cab Files” will be the default directory. Thereare folders within the “\Cab Files” directory that contain demos and pro-gram files. See the 700 Series Color Software Tools CD User’ s Manual formore information about these files.Modem SupportModem PC Cards are not supported by the 700 Series Computer. Howev-er, modem options do include the following:SSwitchable dock that includes a built-in modem and a serial port be-tween which an application can switch.SMini-Landline Modem that can be tethered to the port on the bottomof the 700 Series Computer.SOther external modems that may be connected to the bottom of the700 Series Computer or to the dock.Network SupportRadio CompactFlash Cards cannot be installed by a user. The 700 SeriesComputer must be serviced to install or replace radios. See Chapter 4,“Network Support” for more information.S802.11b radioSIntegrated GSM/GPRS radioSCDPM/1xRTT radioSWireless printing equipped with a Bluetooth qualified module by SocketCommunications
Introduction—Chapter 15700 Series Color Mobile Computer User’s ManualRemoveable Card SupportTo access either the CompactFlash (CF) or SecureDigital (SD) card slot,locate the access door at the top of the 700 Series Computer, remove itstwo screws, then remove the door.CompactFlash CardsSupport is limited to one CompactFlash (CF) Storage Card in the 700 Se-ries Computer, either for storage or for the 802.11b radio.SecureDigital CardsSupport is limited to one SecureDigital (SD) Storage Card in the 700 Se-ries Computer for storage.MultiMediaCardsMultiMediaCards (MMCs) are not supported in the 700 Series Comput-ers because current technology shows that SD cards will quickly surpassMMC cards in storage capacity.Software Build VersionTo check to see if your 700 Series Computer has the latest build, selectStart →Internet Explorer →the Intermec logo.The latest software build version is displayed beneath the Patent Informa-tion title. This information will be useful should you need customer assis-tance.Note: The Unit Information control panel applet is only available in the700 Series Computer if Intermec Content is enabled, the Plus region isenabled and installed, and a laser scanner is installed.
IntroductionChapter —16 700 Series Color Mobile Computer User’s ManualYou can also view the latest software build version on your 700 SeriesComputer by accessing the Unit Information control panel applet. SelectStart →Settings →the System tab →the Unit Information icon →theVersions tab to view the current build version on your 700 SeriesComputer.What’s NewThe newest functionality is available in software build versions 1.30 orgreater. The following changes have occurred since the last release of thismanual:SApplied new publications standards to this manual.SAdapted instructions using Ethernet connections to fit Intermec require-ments in Chapter 2, “Pocket PC 2002.”SMoved “Updating System Software” and “EFlash” information to the Re-covery CD User’ s Manual from Chapter 3, “Installing Applications.”SRemoved several 802.11 APIs not related to the 700 Series Color Com-puter from Chapter 4, “Network Support.”SAdded the Siemens MC45 radio module to Chapter 4, “Network Sup-port.”SAdded tethered scanner information to Chapter 6, “Scanner Support.”SAdded CAB extraction information and FTP Server parameters toChapter 7, “Programming.”SAdded imager option information via the Data Collection control panelapplet to Appendix A, “Control Panel Applets.”Note that this is for 700Series Computers using an imager.
7700 Series Color Mobile Computer User’s ManualPocket PC 20022This chapter introduces the Pocket PC 2002 operating system fromMicrosoft Corporation.
Pocket PC 2002Chapter —28 700 Series Color Mobile Computer User’s ManualIntroductionCongratulations on purchasing a Pocket PC. Due to the size and capabili-ties of this 700 Series Color Mobile Computer, you can keep your mostimportant business and personal information up-to-date and close at hand.Microsoft ActiveSync increases the power of your 700 Series Computer byallowing you to synchronize the information on your desktop or laptopcomputer with your 700 Series Computer. Picture yourself in the follow-ing situations:SA Calendar reminder alerts you that it is time to catch the bus. You grabyour 700 Color Pocket PC Mobile Computer and catch the bus just intime. Because ActiveSync keeps the information on your 700 SeriesComputer up-to-date, you leisurely review your task list, make notesabout the new books and CDs you want to buy, and read and respondto e-mail messages. When you get back to the office, ActiveSync trans-fers any task changes you made, your notes, and your e-mail messageresponses to your desktop computer. For more information on Active-Sync, see “Microsoft ActiveSync” on page 29.SWhile walking with a colleague, your 700 Color Pocket PC MobileComputer rings. You look at the caller ID and see it is your managerwho is calling. She asks if you two are free this afternoon for an emer-gency meeting. While your colleague fumbles through his paper orga-nizer, you press a button on your 700 Series Computer and instantly seea list of today’ s appointments and meetings. You are quickly able to tellyour manager your available times, and make a note of the new meetingwhile on the call. You hang up, send an e-mail with a schedule requestfor the three of you at the desired location. For more information onscheduling appointments and meetings, see “Microsoft Pocket Outlook”on page 31.SYou are meeting your friends tonight for dinner and a movie. Youdownload the latest movie information from the Internet to your desk-top computer and then synchronize it with your 700 Series Computer.At dinner, you pull out your 700 Color Pocket PC Mobile Computerand review your movie options with your friends. For more informationon downloading Web pages to your 700 Series Computer, see “PocketInternet Explorer” on page 62.Premium versus Professional EditionsYour 700 Series Computer will have either the Premium Edition or theProfessional Edition of Pocket PC 2002. Do the following to determinewhich edition of Pocket PC 2002 is on your unit.1Select Start →Internet Explorer →the Intermec logo.
Pocket PC 2002—Chapter 29700 Series Color Mobile Computer User’s Manual2Note the “Software Build” information displayed beneath the VersionInformation title.Note: If you have an older software build, your unit may say either“PREM” (which indicates the Premium Edition) or “PRO” (which indicatesthe Professional Edition).3Tap the Close icon in the top right corner to exit the Internet Explorer.Below is a list of components for each edition of Pocket PC 2002:ComponentPremiumEditionProfessionalEditionMicrosoft ActiveSync Client (page 29) XXMicrosoft Pocket Outlook (page 31) X XPocket Word (page 47) XXPocket Excel (page 52) X XMSN Messenger (page 53) XWindows Media Player for Pocket PC (page 57) XRAMMicrosoft Reader (page 58) XRAMPocket Internet Explorer (page 62) X XNote: Components marked with “RAM” are provided on a CompanionCD for download into RAM rather than burned into Flash ROM.
Pocket PC 2002Chapter —210 700 Series Color Mobile Computer User’s ManualWhere to Find InformationThis chapter describes your 700 Series Computer hardware, provides anoverview of the programs on your 700 Series Computer, and explains howto connect your 700 Series Computer to a desktop computer, a network,or the Internet. For instructions on setting up your 700 Series Computerand installing ActiveSync, see the Quick Start Card. The following is aguide to more information to assist you use your 700 Series Computer.For information on: See this source:Programs on your mobile computer. This chapter and mobile computer Help. To view Help,tap Start →Help.Additional programs that can be installed on the mobilecomputer.The Pocket PC Companion CD.Connecting to and synchronizing with a desktop com-puter.The Quick Start Card or AutoSync Help on your desktopcomputer. To view Help, click Help →Microsoft Acti-veSync Help.Last-minute updates and detailed technical information. The Read Me files, located in the Microsoft ActiveSyncfolder on the desktop computer and on the Pocket PCCompanion CD.Up-to-date information on your Pocket PC. http://www.microsoft.com/mobile/pocketpcPocket PC and many of the technologies supported by the 700 SeriesComputer are not from Intermec Technologies. Many of the utilities andfeatures on a Pocket PC device come directly from Microsoft without anymodification from Intermec Technologies. There may be certain Micro-soft-specific issues that Intermec Technologies would not be able to sup-port, so you will have to contact Microsoft Corporation. Use these URLsto determine your Microsoft support options:Shttp://msdn.microsoft.com/support/Shttp://support.microsoft.com/Snews://news.microsoft.com (a free support option)
Pocket PC 2002—Chapter 211700 Series Color Mobile Computer User’s ManualBasic SkillsLearning to use your 700 Series Computer is easy. This describes the basicconcepts of using and customizing your 700 Series Computer.Buttons and StylusYour 700 Series Computer has hardware buttons that control actions andscroll functions, and a stylus for selecting items and entering information.On the 700 Series Computer, the stylus replaces the mouse.STap:Touch the screen once with the stylus to open items and select options.SDrag:Hold the stylus on the screen and drag across the screen to select textand images. Drag in a list to select multiple items.STap and hold:Tap and hold the stylus on an item to see a list of actions available forthat item. On the pop-up menu that appears, tap the action to be per-formed.Today ScreenWhen you turn on your 700 Series Computer for the first time each day(or after four hours of inactivity), you will see the Today screen. You canalso display it by tapping the Start flag (shown left) and then Today.Onthe Today screen, you can see at a glance important information for theday.
Pocket PC 2002Chapter —212 700 Series Color Mobile Computer User’s ManualFollowing are some of the status icons you may see:Status Icon Meaning:Turns all sounds on and off.Backup battery is low.Main batteries are charging.Main batteries are low.Main batteries are very low.Main batteries are full.Connection is active.Synchronization is beginning or ending.Synchronization is occurring.Notification or one or more instant messages received.Notification of one or more e-mail messages received.If more notification icons need to be displayed than there isroom to display them, the Notification icon (shown left) willdisplay. Tap the icon to view all notification icons.
Pocket PC 2002—Chapter 213700 Series Color Mobile Computer User’s ManualProgramsYou can switch from one program to another by selecting it from the Startmenu. (You can customize which programs you see on this menu. Forinformation, see “Adjusting Settings” on page 26.) To access someprograms, tap Start →Programs, and then the program name.You can also switch to some programs by pressing a program button. Your700 Series Computer has one or more program buttons located on thefront or side of the computer. The icons on the buttons identify the pro-grams to which they switch.Note: Some programs have abbreviated labels for check boxes and drop-down menus. To see the full spelling of an abbreviated label, tap and holdthe stylus on the label. Drag the stylus off the label so that the command isnot carried out.The following is a partial list of programs that are on your 700 SeriesComputer. Look on the Pocket PC Companion CD for additional pro-grams that you can install onto your 700 Series Computer.ActiveSyncSynchronize information between your 700 Series Computer and desktopcomputer.CalendarKeep track of your appointments and create meeting requests.ContactsKeep track of your friends and colleagues.InboxSend and receive e-mail messages.Pocket Internet ExplorerBrowse Web and WAP (Wireless Application Protocol) sites, and downloadnew programs and files from the Internet.NotesCreate handwritten or typed notes, drawings, and recordings.TasksKeep track of your tasks.Pocket ExcelCreate new workbooks or view and edit Excel workbooks created on yourdesktop computer.MSN MessengerSend and receive instant messages with your MSN Messenger contacts.Pocket WordCreate new documents or view and edit Word documents created on yourdesktop computer.
Pocket PC 2002Chapter —214 700 Series Color Mobile Computer User’s ManualNavigation Bar and Command BarThe navigation bar is located at the top of the screen. It displays the activeprogram and current time, and allows you to switch to programs and closescreens.Use the command bar at the bottom of the screen to perform tasks in pro-grams. The command bar includes menu names, buttons, and the InputPanel button. To create a new item in the current program, tap New.Tosee the name of a button, tap and hold the stylus on the button. Drag thestylus off the button so that the command is not carried out.
Pocket PC 2002—Chapter 215700 Series Color Mobile Computer User’s ManualPop-up MenusWith pop-up menus, you can quickly choose an action for an item. Forexample, you can use the pop-up menu in the contact list to quickly deletea contact, make a copy of a contact, or send an e-mail message to a con-tact. The actions in the pop-up menus vary from program to program. Toaccess a pop-up menu, tap and hold the stylus on the item name that youwant to perform the action on. When the menu appears, lift the stylus,and tap the action you want to perform. Or tap anywhere outside themenu to close the menu without performing an action.NotificationsYour 700 Series Computer reminds you in a variety of ways when youhave something to do. For example, if you have set up an appointment inCalendar, a task with a due date in Tasks, or an alarm in Clock, you will benotified in any of the following ways:SA message box appears on the screen.SA sound, which you can specify, is played.SA light flashes on your 700 Series Computer.SA vibrator resonates from the 700 Series Computer.To choose reminder types and sounds for your 700 Series Computer, tapStart →Settings →the Personal tab →Sounds & Notifications. Theoptions you choose here apply throughout the 700 Series Computer.
Pocket PC 2002Chapter —216 700 Series Color Mobile Computer User’s ManualEnter Information on Your 700 Series ComputerYou have several options for entering new information:SUse the input panel to enter typed text, either by using the soft key-board or other input method.SWrite directly on the screen.SDraw pictures on the screen.SSpeak into your 700 Series Computer microphone to record a message.SUse Microsoft ActiveSync to synchronize or copy information fromyour desktop computer to your 700 Series Computer. For more infor-mation on ActiveSync, see ActiveSync Help on your desktop computer.Use the input panel to enter information in any program on your 700Series Computer. You can either type using the soft keyboard or writeusing Block Recognizer,Letter Recognizer,orTranscriber. In either case,the characters appear as typed text on the screen.To show or hide the input panel, tap the Input Panel button. Tap thearrow next to the Input Panel button to see your choices.
Pocket PC 2002—Chapter 217700 Series Color Mobile Computer User’s ManualWhen you use the input panel, your 700 Series Computer anticipates theword you are typing or writing and displays it above the input panel.When you tap the displayed word, it is inserted into your text at theinsertion point. The more you use your 700 Series Computer, the morewords it learns to anticipate.Note: To change word suggestion options, such as the number of wordssuggested at one time, tap Start →Settings →the Personal tab →Input→the Word Completion tab.Typing With the Soft Keyboard1Tap the arrow next to the Input Panel button, and then Keyboard.2On the soft keyboard that is displayed, tap the keys with your stylus.Using Block RecognizerWith Block Recognizer, you can input character strokes using the stylusthat are similar to those used on other 700 Series Computers.1Tap the arrow next to the Input Panel button, then Block Recognizer.2Write a letter in the box.When you write a letter, it is converted to typed text that appears on thescreen. For specific instructions on using Block Recognizer, with BlockRecognizer open, tap the question mark next to the writing area.
Pocket PC 2002Chapter —218 700 Series Color Mobile Computer User’s ManualUsing Letter RecognizerWith Letter Recognizer, you can write letters using the stylus just as youwould on paper.1Tap the arrow next to the Input Panel button, then Letter Recognizer.2Write a letter in the box.When you write a letter, it is converted to typed text that appears on thescreen. For specific instructions on using Letter Recognizer, with LetterRecognizer open, tap the question mark next to the writing area.Using TranscriberWith Transcriber, you can write anywhere on the screen using the stylusjust as you would on paper. Unlike Letter Recognizer and Block Recogniz-er, you can write a sentence or more of information. Then, pause and letTranscriber change the written characters to typed characters.1Tap the arrow next to the Input Panel button, and then Transcriber.2Write anywhere on the screen.For specific instructions on using Transcriber, with Transcriber open, tapthe question mark in the lower right hand corner of the screen.Selecting Typed TextIf you want to edit or format typed text, you must select it first.SDrag the stylus across the text you want to select.You can cut, copy, and paste text by tapping and holding the selectedwords and then tapping an editing command on the pop-up menu, or bytapping the command on the Edit menu.
Pocket PC 2002—Chapter 219700 Series Color Mobile Computer User’s ManualWriting on the ScreenIn any program that accepts writing, such as the Notes program, and inthe Notes tab in Calendar, Contacts, and Tasks, you can use your stylus towrite directly on the screen. Write the way you do on paper. You can editand format what you have written and convert the information to text at alater time.STap the Pen button to switch to writing mode. This action displays lineson the screen to help you write.Note: Some programs that accept writing may not have the Pen button.See the documentation for that program to find out how to switch to writ-ing mode.Selecting the WritingIf you want to edit or format writing, you must select it first.1Tap and hold the stylus next to the text you want to select until the in-sertion point appears.2Without lifting, drag the stylus across the text you want to select.If you accidentally write on the screen, tap Tools →Undo and try again.You can also select text by tapping the Pen button to deselect it and thendragging the stylus across the screen.You can cut, copy, and paste written text in the same way you work withtyped text: tap and hold the selected words and then tap an editing com-mand on the pop-up menu, or tap the command on the Edit menu.
Pocket PC 2002Chapter —220 700 Series Color Mobile Computer User’s ManualConverting Writing to TextSTap Tools →Recognize.If you want to convert only certain words, select them before tapping Rec-ognize on the Tools menu (or tap and hold the selected words and then tapRecognize on the pop-up menu). If a word is not recognized, it is left aswriting.
Pocket PC 2002—Chapter 221700 Series Color Mobile Computer User’s ManualIf the conversion is incorrect, you can select different words from a list ofalternates or return to the original writing. To do so, tap and hold the in-correct word (tap one word at a time). On the pop-up menu, tap Alterna-tes. A menu with a list of alternate words appears. Tap the word you wantto use, or tap the writing at the top of the menu to return to the originalwriting.Tips for getting good recognition:SWrite neatly.SWrite on the lines and draw descenders below the line. Write the crossof the “t” and apostrophes below the top line so that they are not con-fused with the word above. Write periods and commas above the line.SFor better recognition, try increasing the zoom level to 300% using theTools menu.SWrite the letters of a word closely and leave big gaps between words sothat the 700 Series Computer can easily tell where words begin and end.SHyphenated words, foreign words that use special characters such as ac-cents, and some punctuation cannot be converted.SIf you add writing to a word to change it (such as changing a “3” to an“8”) after you attempt to recognize the word, the writing you add willnot be included if you attempt to recognize the writing again.
Pocket PC 2002Chapter —222 700 Series Color Mobile Computer User’s ManualDrawing on the ScreenYou can draw on the screen in the same way that you write on the screen.The difference between writing and drawing on the screen is how you se-lect items and how they can be edited. For example, selected drawings canbe resized, while writing cannot.Creating a DrawingSCross three ruled lines on your first stroke. A drawing box appears. Sub-sequent strokes in or touching the drawing box become part of the dra-wing. Drawings that do not cross three ruled lines will be treated aswriting.Note: You may want to change the zoom level so that you can more easilywork on or view your drawing. Tap Tools and then a zoom level.Selecting a DrawingIf you want to edit or format a drawing, you must select it first.STap and hold the stylus on the drawing until the selection handle ap-pears. To select multiple drawings, deselect the Pen button and thendrag to select the drawings you want.You can cut, copy, and paste selected drawings by tapping and holding theselected drawing and then tapping an editing command on the pop-upmenu, or by tapping the command on the Edit menu. To resize a drawing,make sure the Pen button is not selected, and drag a selection handle.
Pocket PC 2002—Chapter 223700 Series Color Mobile Computer User’s ManualRecording a MessageIn any program where you can write or draw on the screen, you can alsoquickly capture thoughts, reminders, and phone numbers by recording amessage. In Calendar, Tasks, and Contacts, you can include a recording inthe Notes tab. In the Notes program, you can create a stand-alone record-ing or include a recording in a written note. If you want to include the re-cording in a note, open the note first. In the Inbox program, you can add arecording to an e-mail message.Creating a Recording1Hold your computer’ s microphone near your mouth or source ofsound.2Press and hold the Record hardware button on your 700 Series Com-puter until you hear a beep.3While holding down the Record button, make your recording.4To stop recording, release the Record button. Two beeps will sound.The new recording appears in the note list or as an embedded icon.Note: You can also make a recording by tapping the Record button on theRecording toolbar.To play a recording, tap it in the list or tap its icon in the note.
Pocket PC 2002Chapter —224 700 Series Color Mobile Computer User’s ManualUsing My TextWhen using Inbox or MSN Messenger, use My Text to quickly insert pre-set or frequently used messages into the text entry area. To insert a mes-sage, tap My Text and tap a message.Note: You can add text after inserting a My Text message before sendingit.To edit a My Text message, in the Tools menu, tap Edit →My Text Mes-sages. Select the message you wish to edit and make desired changes.
Pocket PC 2002—Chapter 225700 Series Color Mobile Computer User’s ManualFinding and Organizing InformationThe Find feature on your 700 Series Computer helps you quickly locateinformation.Tap Start →Find. Enter the text you want to find, select a data type, andthen tap Go to initiate the search.Note: To quickly find information that is taking up storage space on your700 Series Computer, select Larger than 64 KB in Type.You can also use the File Explorer to find files on your 700 Series Comput-er and to organize these files into folders. Tap Start →Programs →FileExplorer.Note: You can move files in File Explorer by tapping and holding the itemyou want to move, and then tapping Cut or Copy and Paste on the pop-up menu.
Pocket PC 2002Chapter —226 700 Series Color Mobile Computer User’s ManualCustomizing Your 700 Series ComputerYou can customize your 700 Series Computer by adjusting settings andinstalling additional software.Adjusting SettingsYou can adjust settings to suit the way you work. To see available options,tap Start →Settings →either the Personal tab or the System tab located atthe bottom of the screen. You might want to adjust the following:SClock:To change the time or to set alarms.SMenus:To customize what appears on the Start menu, and to enable a pop-upmenu from the New button.SOwner Information:To enter your contact information.SPassword:To limit access to your 700 Series Computer.SPower:To maximize battery life.SToday:To customize the look and information displayed on the Today screen.Adding or Removing ProgramsPrograms added to your 700 Series Computer at the factory are stored inROM (Read Only Memory). You cannot remove this software, and youwill never accidentally lose ROM contents. ROM programs can be up-dated using special installation programs with a *.XIP extension. All otherprograms and data files added to your 700 Series Computer after factoryinstallation are stored in RAM (Random Access Memory).You can install any program created for your 700 Series Computer, as longas your 700 Series Computer has enough memory. The most popular placeto find software for your 700 Series Computer is on the Pocket PC Website (http://www.microsoft.com/mobile/pocketpc).Adding Programs Using ActiveSyncYou will need to install the appropriate software for your 700 Series Com-puter on your desktop computer before installing it on your 700 SeriesComputer.1Determine your 700 Series Computer and processor type so that youknow which version of the software to install. Tap Start →Settings →the System tab →About →the Version tab, then make a note of theinformation in Processor.2Download the program to your desktop computer (or insert the CD ordisk that contains the program into your desktop computer). You maysee a single *.XIP, *.EXE, or *.ZIP file, a SETUP.EXE file, or severalversions of files for different 700 Series Computer types and processors.Be sure to select the program designed for the Pocket PC and your 700Series Computer processor type.
Pocket PC 2002—Chapter 227700 Series Color Mobile Computer User’s Manual3Read any installation instructions, Read Me files, or documentation thatcomes with the program. Many programs provide special installationinstructions.4Connect your 700 Series Computer and desktop computer.5Double-click the *.EXE file.SIf the file is an installer, the installation wizard will begin. Follow thedirections on the screen. Once the software has been installed on yourdesktop computer, the installer will automatically transfer the soft-ware to your 700 Series Computer.SIf the file is not an installer, you will see an error message stating thatthe program is valid but it is designed for a different type of comput-er. You will need to move this file to your 700 Series Computer. Ifyou cannot find any installation instructions for the program in theRead Me file or documentation, use ActiveSync Explore to copy theprogram file to the Program Files folder on your 700 Series Comput-er. For more information on copying files using ActiveSync, see Acti-veSync Help.Once installation is complete, tap Start →Programs, and then the pro-gram icon to switch to it.Adding a Program Directly from the Internet1Determine your 700 Series Computer and processor type so that youknow which version of the software to install. Tap Start →Settings →the System tab →About →the Version tab, then make a note of theinformation in Processor.2Download the program to your 700 Series Computer straight from theInternet using Pocket Internet Explorer. You may see a single *.XIP,*.EXE, or *.ZIP file, a SETUP.EXE file, or several versions of files fordifferent 700 Series Computer types and processors. Be sure to select theprogram designed for the Pocket PC and your 700 Series Computerprocessor type.3Read any installation instructions, Read Me files, or documentation thatcomes with the program. Many programs provide installation instruc-tions.4Tap the file, such as a *.XIP or *.EXE file. The installation wizard willbegin. Follow the directions on the screen.
Pocket PC 2002Chapter —228 700 Series Color Mobile Computer User’s ManualAdding a Program to the Start MenuTap Start →Settings →Menus →the Start Menu tab, and then the checkbox for the program. If you do not see the program listed, you can eitheruse File Explorer on the 700 Series Computer to move the program to theStart Menu folder, or use ActiveSync on the desktop computer to create ashortcut to the program and place the shortcut in the Start Menu folder.SUsing File Explorer on the 700 Series Computer:Tap Start →Programs →File Explorer, and locate the program (tap thefolder list, labeled My Documents by default, and then My Device tosee a list of all folders on the 700 Series Computer). Tap and hold theprogram and tap Cut on the pop-up menu. Open the Start Menu fold-er located in the Windows folder, tap and hold a blank area of the win-dow, and tap Paste on the pop-up menu. The program will now appearon the Start menu. For more information on using File Explorer, see“Finding and Organizing Information” on page 25.SUsing ActiveSync on the desktop computer:Use the Explorer in ActiveSync to explore your 700 Series Computerfiles and locate the program. Right-click the program, and then clickCreate Shortcut. Move the shortcut to the Start Menu folder in theWindows folder. The shortcut now appears on the Start menu. Formore information, see ActiveSync Help.Removing ProgramsSTap Start →Settings →the System tab →Remove Programs.If the program does not appear in the list of installed programs, use FileExplorer on your 700 Series Computer to locate the program, tap and holdthe program, and then tap Delete on the pop-up menu.
Pocket PC 2002—Chapter 229700 Series Color Mobile Computer User’s ManualMicrosoft ActiveSyncVisit the following Microsoft Web site for the latest in updates, technicalinformation, and samples:Shttp://www.microsoft.com/mobile/pocketpc/downloads/activesync.aspUsing Microsoft ActiveSync, you can synchronize the information on yourdesktop computer with the information on your 700 Series Computer.Synchronization compares the data on your 700 Series Computer withyour desktop computer and updates both computers with the most recentinformation. For example:SKeep Pocket Outlook data up-to-date by synchronizing your 700 SeriesComputer with Microsoft Outlook data on your desktop computer.SSynchronize Microsoft Word and Microsoft Excel files between your700 Series Computer and desktop computer. Your files are automaticallyconverted to the correct formatNote: By default, ActiveSync does not automatically synchronize all typesof information. Use ActiveSync options to turn synchronization on and offfor specific information types.With ActiveSync, you can also:SBack up and restore your 700 Series Computer data.SCopy (rather than synchronize) files between your 700 Series Computerand desktop computer.SControl when synchronization occurs by selecting a synchronizationmode. For example, you can synchronize continually while connected toyour desktop computer or only when you choose the synchronize com-mand.SSelect which information types are synchronized and control how muchdata is synchronized. For example, you can choose how many weeks ofpast appointments you want synchronized.Before you begin synchronization, install ActiveSync on your desktopcomputer from the Pocket PC Companion CD. For more information oninstalling ActiveSync, see your Quick Start card. ActiveSync is alreadyinstalled on your 700 Series Computer.After installation is complete, the ActiveSync Setup Wizard helps you con-nect your 700 Series Computer to your desktop computer, set up a part-nership so you can synchronize information between your 700 SeriesComputer and your desktop computer, and customize your synchroniza-tion settings. Your first synchronization process will automatically beginwhen you finish using the wizard.After your first synchronization, take a look at Calendar, Contacts, andTasks on your 700 Series Computer. You will notice that information youhave stored in Microsoft Outlook on your desktop computer has beencopied to your 700 Series Computer, and you did not have to type a word.Disconnect your 700 Series Computer from your computer and you areready to go!
Pocket PC 2002Chapter —230 700 Series Color Mobile Computer User’s ManualOnce you have set up ActiveSync and completed the first synchronizationprocess, you can initiate synchronization from your 700 Series Computer.To switch to ActiveSync on your 700 Series Computer, tap Start →ActiveSync. Note that if you have a wireless LAN card, you cansynchronize remotely from your 700 Series Computer.For information about using ActiveSync on your desktop computer, startActiveSync on your desktop computer, and then see ActiveSync Help.For more information about ActiveSync on your 700 Series Computer,switch to ActiveSync, then tap Start →Help.
Pocket PC 2002—Chapter 231700 Series Color Mobile Computer User’s ManualMicrosoft Pocket OutlookNote: The Professional Edition of Microsoft Pocket Outlook does not in-clude a spell checker.Microsoft Pocket Outlook includes Calendar, Contacts, Tasks, Inbox, andNotes. You can use these programs individually or together. For example,e-mail addresses stored in Contacts can be used to address e-mail messagesin Inbox.Using ActiveSync, you can synchronize information in Microsoft Outlookor Microsoft Exchange on your desktop computer with your 700 SeriesComputer. You can also synchronize this information directly with aMicrosoft Exchange server. Each time you synchronize, ActiveSynccompares the changes you made on your 700 Series Computer and desk-top computer or server and updates both computers with the latest in-formation. For information on using ActiveSync, see ActiveSync Help onthe desktop computer.You can switch to any of these programs by tapping them on the Startmenu.Calendar: Scheduling Appointments and MeetingsUse Calendar to schedule appointments, including meetings and otherevents. You can check your appointments in one of several views (Agenda,Day, Week, Month, and Year) and easily switch views by using the Viewmenu.
Pocket PC 2002Chapter —232 700 Series Color Mobile Computer User’s ManualNote: You can customize the Calendar display, such as changing the firstday of the week, by tapping Options on the Tools menu.Creating an Appointment1If you are in Day or Week view, tap the desired date and time for theappointment.2Tap New.3Using the input panel, enter a description and a location. Tap first toselect the field.4If needed, tap the date and time to change them.5Enter other desired information. You will need to hide the input panelto see all available fields.6To add notes, tap the Notes tab. You can enter text, draw, or create arecording. For more information on creating notes, see “Notes: CapturingThoughts and Ideas” on page 40.7When finished, tap OK to return to the calendar.Note:IfyouselectRemind me in an appointment, your 700 Series Com-puter will remind you according to the options set in Start →Settings →the Personal tab →Sounds & Reminders.
Pocket PC 2002—Chapter 233700 Series Color Mobile Computer User’s ManualUsing the Summary ScreenWhen you tap an appointment in Calendar, a summary screen is displayed.To change the appointment, tap Edit.Creating Meeting RequestsYou can use Calendar to set up meetings with users of Outlook or PocketOutlook. The meeting request will be created automatically and sent eitherwhen you synchronize Inbox or when you connect to your e-mail server.Indicate how you want meeting requests sent by tapping Tools →Options. If you send and receive e-mail messages through ActiveSync,select ActiveSync.Scheduling a Meeting1Create an appointment.2In the appointment details, hide the input panel, and then tapAttendees.3From the list of e-mail addresses you have entered in Contacts, select themeeting attendees.The meeting notice is created automatically and placed in the Outboxfolder.For more information on sending and receiving meeting requests, see Cal-endar Help and Inbox Help on the 700 Series Computer.
Pocket PC 2002Chapter —234 700 Series Color Mobile Computer User’s ManualContacts: Tracking Friends and ColleaguesContacts maintains a list of your friends and colleagues so that you caneasily find the information you are looking for, whether you are at homeor on the road. Using the 700 Series Computer infrared (IR) port, you canquickly share Contacts information with other 700 Series Computer users.Note: To change the way information is displayed in the list, tap Tools →Options.Creating a Contact1Tap New.2Using the input panel, enter a name and other contact information. Youwill need to scroll down to see all available fields.3To assign the contact to a category, scroll to and tap Categories and se-lect a category from the list. In the contact list, you can display contactsby category.4To add notes, tap the Notes tab. You can enter text, draw, or create arecording. For more information on creating notes, see “Notes: CapturingThoughts and Ideas” on page 40.
Pocket PC 2002—Chapter 235700 Series Color Mobile Computer User’s Manual5When finished, tap OK to return to the contact list.Finding a ContactThere are four ways to find a contact:SIn the contact list, enter a contact name in the box under the navigationbar. To show all contacts again, clear text from the box or tap the buttonto the right of the box.SIn the contact list, tap the category list (labeled All Contacts by default)and select the type of contact that you want displayed. To show all con-tacts again, select All Contacts. To view a contact not assigned to a cate-gory, select None.STo view the names of companies your contacts work for, in the contactlist, tap View →By Company. The number of contacts that work forthat company will be displayed to the right of the company name.STap Start →Find, enter the contact name, select Contacts for the type,and then tap Go.
Pocket PC 2002Chapter —236 700 Series Color Mobile Computer User’s ManualUsing the Summary ScreenWhen you tap a contact in the contact list, a summary screen is displayed.To change the contact information, tap Edit.
Pocket PC 2002—Chapter 237700 Series Color Mobile Computer User’s ManualTasks: Keeping a To Do ListUse Tasks to keep track of what you have to do.Note: To change the way information is displayed in the list, tap Tools →Options.
Pocket PC 2002Chapter —238 700 Series Color Mobile Computer User’s ManualCreating a Task1Tap New.2Using the input panel, enter a description.3You can enter a start date and due date or enter other information byfirst tapping the field. If the input panel is open, you will need to hide itto see all available fields.4To assign the task to a category, tap Categories and select a categoryfrom the list. In the task list, you can display tasks by category.5To add notes, tap the Notes tab. You can enter text, draw, or create arecording. For more information on creating notes, see “Notes: CapturingThoughts and Ideas” on page 40.6When finished, tap OK to return to the task list.Note: To quickly create a task with only a subject, tap Entry Bar on theTools menu. Then, tap Tap here to add a new task and enter your taskinformation.
Pocket PC 2002—Chapter 239700 Series Color Mobile Computer User’s ManualUsing the Summary ScreenWhen you tap a task in the task list, a summary screen is displayed. Tochange the task, tap Edit.
Pocket PC 2002Chapter —240 700 Series Color Mobile Computer User’s ManualNotes: Capturing Thoughts and IdeasQuickly capture thoughts, reminders, ideas, drawings, and phone numberswith Notes. You can create a written note or a recording. You can also in-clude a recording in a note. If a note is open when you create the record-ing, it will be included in the note as an icon. If the note list is displayed, itwill be created as a stand-alone recording.
Pocket PC 2002—Chapter 241700 Series Color Mobile Computer User’s ManualCreating a Note1Tap New.2Create your note by writing, drawing, typing, and recording. For moreinformation about using the input panel, writing and drawing on thescreen, and creating recordings, see “Basic Skills” on page 11.
Pocket PC 2002Chapter —242 700 Series Color Mobile Computer User’s ManualInbox: Sending and Receiving E-mail MessagesUse Inbox to send and receive e-mail messages in either of these ways:SSynchronize e-mail messages with Microsoft Exchange or MicrosoftOutlook on your desktop computer.SSend and receive e-mail messages by connecting directly to an e-mailserver through an Internet Service Provider (ISP) or a network.Synchronizing E-mail MessagesE-mail messages can be synchronized as part of the general synchronizationprocess. You will need to enable Inbox synchronization in ActiveSync. Forinformation on enabling Inbox synchronization, see ActiveSync Help on thedesktop computer. During synchronization:SMessages are copied from the mail folders of Exchange or Outlook onyour desktop computer to the ActiveSync folder in Inbox on your 700Series Computer. By default, you will receive messages from the pastthree days only, the first 100 lines of each message, and file attachmentsof less than 100 KB in size.SE-mail messages in the Outbox folder on your 700 Series Computer aretransferred to Exchange or Outlook, and then sent from those pro-grams.SE-mail messages in subfolders must be selected in ActiveSync on yourdesktop computer in order to be transferred.Connecting Directly to an E-mail ServerIn addition to synchronizing e-mail messages with your desktop computer,you can send and receive e-mail messages by connecting to an e-mail serverusing a modem or network card connected to your 700 Series Computer.You will need to set up a remote connection to a network or an ISP, and aconnection to your e-mail server. For more information, see “Getting Con-nected” on page 67.When you connect to the e-mail server, new messages are downloaded tothe 700 Series Computer Inbox folder, messages in the 700 Series Com-puter Outbox folder are sent, and messages that have been deleted on thee-mail server are removed from the 700 Series Computer Inbox folder.Messages that you receive directly from an e-mail server are linked to youre-mail server rather than your desktop computer. When you delete a mes-sage on your 700 Series Computer, it is also deleted from the e-mail serverthe next time you connect based on the settings selected in ActiveSync.You can work online or offline. When working online, you read and re-spond to messages while connected to the e-mail server. Messages are sentas soon as you tap Send, which saves space on your 700 Series Computer.When working offline, once you have downloaded new message headers orpartial messages, you can disconnect from the e-mail server and then de-cide which messages to download completely. The next time you connect,Inbox downloads the complete messages you have marked for retrieval andsends the messages you have composed.
Pocket PC 2002—Chapter 243700 Series Color Mobile Computer User’s ManualUsing the Message ListMessages you receive are displayed in the message list. By default, the mostrecently received messages are displayed first in the list.
Pocket PC 2002Chapter —244 700 Series Color Mobile Computer User’s ManualWhen you receive a message, tap it to open it. Unread messages are dis-played in bold.When you connect to your e-mail server or synchronize with your desktopcomputer, by default, you will receive messages from the last five daysonly, the first 100 lines of each new message, and file attachments of lessthan 100 KB in size. The original messages remain on the e-mail server oryour desktop computer.You can mark the messages that you want to retrieve in full during yournext synchronization or e-mail server connection. In the message list, tapand hold the message you want to retrieve. On the pop-up menu, tapMark for Download. The icons in the Inbox message list give you visualindications of message status.You specify your downloading preferences when you set up the service orselect your synchronization options. You can change them at any time:SChange options for Inbox synchronization using ActiveSync options.For more information, see ActiveSync Help.SChange options for direct e-mail server connections in Inbox on your700 Series Computer. Tap Tools →Options →the Service tab, thentap the service you want to change. Tap and hold the service and selectDelete to remove a service.
Pocket PC 2002—Chapter 245700 Series Color Mobile Computer User’s ManualComposing MessagesTo compose a message:1Tap New.2In the To field, enter an e-mail or SMS address of one or more recipi-ents, separating them with a semicolon, or select a name from the con-tact list by tapping the Address Book button. All e-mail addresses en-tered in the e-mail fields in Contacts appear in the Address Book.3Compose your message. To enter preset or frequently used messages, tapMy Text and select a message.4Tap Send when you have finished the message. If you are working of-fline, the message is moved to the Outbox folder and will be sent thenext time you connect.If you are sending an SMS message and want to know if it was received,tap Edit →Options →Request SMS text message delivery notificationbefore sending the message.
Pocket PC 2002Chapter —246 700 Series Color Mobile Computer User’s ManualManaging E-mail Messages and FoldersBy default, messages are displayed in one of five folders for each serviceyou have created: Inbox, Deleted Items, Drafts, Outbox, and Sent Items.The Deleted Items folder contains messages that have been deleted on the700 Series Computer. The behavior of the Deleted and Sent Items foldersdepends on the options you have chosen. In the message list, tap Tools →Options →the Message tab, then select your options.If you want to organize messages into additional folders, tap Tools →Manage Folders to create new folders. To move a message to another fold-er, in the message list, tap and hold the message and then tap Move to onthe pop-up menu.Folder Behavior With a Direct Connection to an E-mail ServerThe behavior of the folders you create depends on whether you are usingActiveSync, SMS, POP3, or IMAP4.SIf you use ActiveSync:E-mail messages in the Inbox folder in Outlook will automatically besynchronized with your 700 Series Computer. You can select to syn-chronize additional folders by designating them for ActiveSync. Thefolders you create and the messages you move will then be mirrored onthe server. For example, if you move two messages from the Inbox fold-er to a folder named Family, and you have designated Family for syn-chronization, the server creates a copy of the Family folder and copiesthe messages into that folder. You can then read the messages while awayfrom your desktop computer.SIf you use SMS:Messages are stored in the Inbox folder.SIf you use POP3:and you move e-mail messages to a folder you created, the link is brokenbetween the messages on the 700 Series Computer and their copies onthe mail server. The next time you connect, the mail server will see thatthe messages are missing from the 700 Series Computer Inbox and de-lete them from the server. This prevents you from having duplicate cop-ies of a message, but it also means that you will no longer have access tomessages that you move to folders created from anywhere except the700 Series Computer.SIf you use IMAP4:The folders you create and the e-mail messages you move are mirroredon the server. Therefore, messages are available to you anytime you con-nect to your mail server, whether it is from your 700 Series Computeror desktop computer. This synchronization of folders occurs wheneveryou connect to your mail server, create new folders, or rename/deletefolders when connected.
Pocket PC 2002—Chapter 247700 Series Color Mobile Computer User’s ManualCompanion ProgramsThe companion programs consist of Microsoft Pocket Word, MicrosoftPocket Excel, Windows Media Player for Pocket PC, and MicrosoftReader. To switch to a companion program on your 700 Series Computer,tap Start →Programs, then tap the program name.Pocket WordPocket Word works with Microsoft Word on your desktop computer togive you easy access to copies of your documents. You can create new doc-uments on your 700 Series Computer, or you can copy documents fromyour desktop computer to your 700 Series Computer. Synchronize docu-ments between your desktop computer and your 700 Series Computer sothat you have the most up-to-date content in both locations.Creating a DocumentUse Pocket Word to create documents, such as letters, meeting minutes,and trip reports. To create a new file, tap Start →Programs →PocketWord →New. A blank document appears. Or, if you have selected a tem-plate for new documents in the Options dialog box, that template appearswith appropriate text and formatting already provided. You can open onlyone document at a time; when you open a second document, you will beasked to save the first. You can save a document you create or edit in a va-riety of formats, including Word (.DOC), Pocket Word (.PSW), Rich TextFormat (.RTF), and Plain Text (.TXT).
Pocket PC 2002Chapter —248 700 Series Color Mobile Computer User’s ManualPocket Word contains a list of the files stored on your 700 Series Comput-er. Tap a file in the list to open it. To delete, make copies of, and send files,tap and hold a file in the list. Then, select the appropriate action on thepop-up menu.You can enter information in Pocket Word in one of four modes (typing,writing, drawing, and recording), which are displayed on the View menu.Each mode has its own toolbar, which you can show and hide by tappingthe Show/Hide Toolbar button on the command bar.Note: You can change the zoom magnification by tapping View →Zoom,then select the percentage you want. Select a higher percentage to entertext and a lower one to see more of your document.If you are opening a Word document created on a desktop computer, selectWrap to Window on the View menu so that you can see the entiredocument.
Pocket PC 2002—Chapter 249700 Series Color Mobile Computer User’s ManualTyping ModeUsing the input panel, enter typed text into the document. For more infor-mation on entering typed text, see “Basic Skills” on page 11.To format existing text and to edit text, first select the text. You can selecttext as you do in a Word document, using your stylus instead of the mouseto drag through the text you want to select. You can search a document tofind text by tapping Edit →Find/Replace.
Pocket PC 2002Chapter —250 700 Series Color Mobile Computer User’s ManualWriting ModeIn writing mode, use your stylus to write directly on the screen. Ruledlines are displayed as a guide, and the zoom magnification is greater thanin typing mode to allow you to write more easily. For more information onwriting and selecting writing, see “Basic Skills” on page 11.Note: If you cross three ruled lines in a single stylus stroke, the writingbecomes a drawing, and can be edited and manipulated as described in“Drawing Mode” on the next page.Written words are converted to graphics (metafiles) when a Pocket Worddocument is converted to a Word document on your desktop computer.
Pocket PC 2002—Chapter 251700 Series Color Mobile Computer User’s ManualDrawing ModeIn drawing mode, use your stylus to draw on the screen. Grid lines appearas a guide. When you lift your stylus off the screen after the first stroke,you will see a drawing box indicating the boundaries of the drawing. Everysubsequent stroke within or touching the drawing box becomes part of thedrawing. For more information on drawing and selecting drawings, see“Basic Skills” on page 11.Recording ModeIn recording mode, embed a recording into your document. Recordings aresaved as .WAV files. For more information on recording, see “Basic Skills”on page 11.For more information on using Pocket Word, tap Start →Help.
Pocket PC 2002Chapter —252 700 Series Color Mobile Computer User’s ManualPocket ExcelPocket Excel works with Microsoft Excel on your desktop computer togive you easy access to copies of your workbooks. You can create newworkbooks on your 700 Series Computer, or you can copy workbooksfrom your desktop computer to your 700 Series Computer. Synchronizeworkbooks between your desktop computer and your 700 Series Comput-er so that you have the most up-to-date content in both locations.Creating a WorkbookUse Pocket Excel to create workbooks, such as expense reports and mileagelogs. To create a new file, tap Start →Programs →Pocket Excel →New.A blank workbook appears. Or, if you have selected a template for newworkbooks in the Options dialog box, that template appears withappropriate text and formatting already provided. You can open only oneworkbook at a time; when you open a second workbook, you will be askedto save the first. You can save a workbook you create or edit in a variety offormats, including Pocket Excel (.PXL) and Excel (.XLS).Pocket Excel contains a list of the files stored on your 700 Series Comput-er. Tap a file in the list to open it. To delete, make copies of, and send files,tap and hold a file in the list. Then select the appropriate action from thepop-up menu.Pocket Excel provides fundamental spreadsheet tools, such as formulas,functions, sorting, and filtering. To display the toolbar, tap View →Toolbar.
Pocket PC 2002—Chapter 253700 Series Color Mobile Computer User’s ManualNote: If your workbook contains sensitive information, you can protect itwith a password. To do so, open the workbook, tap Edit →Password.Ev-ery time you open the workbook, you will need to enter the password, sochoose one that is easy for you to remember but hard for others to guess.Tips for Working in Pocket ExcelNote the following when working in large worksheets in Pocket Excel:SView in full-screen mode to see as much of your worksheet as possible.Tap View →Full Screen. To exit full-screen mode, tap Restore.SShow and hide window elements. Tap View and then tap the elementsyouwanttoshoworhide.SFreeze panes on a worksheet. First select the cell where you want tofreeze panes. Tap View →Freeze Panes. You might want to freeze thetop and leftmost panes in a worksheet to keep row and column labelsvisible as you scroll through a sheet.SSplit panes to view different areas of a large worksheet. Tap View →Split. Then drag the split bar to where you want it. To remove the split,tap View →Remove Split.SShow and hide rows and columns. To hide a hidden row or column, se-lect a cell in the row or column you want to hide. Then tap Format ,Row or Column →Hide. To show a hidden row or column, tap Tools→Go To, and then type a reference that is in the hidden row or co-lumn. Then tap Format →Row or Column →Unhide.For more information on using Pocket Excel, tap Start →Help.MSN MessengerNote: MSN Messenger is only available on the Premium Edition of PocketPC 2002.MSN Messenger on your 700 Series Computer is an instant messagingprogram that lets you:SSee who is online.SSend and receive instant messages.SHave instant message conversations with groups of contacts.To use MSN Messenger, you must have a Microsoft Passport account or aMicrosoft Exchange e-mail account. You must have a Passport to use MSNMessenger Service. If you have a Hotmail or MSN account, you alreadyhave a Passport. Once you have obtained either a Microsoft Passport or aMicrosoft Exchange account, you are ready to set up your account.SSign up for a Microsoft Passport account at http://www.passport.com.SGet a free Microsoft Hotmail e-mail address at http://www.hotmail.com.To switch to MSN Messenger, tap Start →Programs →MSN Messenger.
Pocket PC 2002Chapter —254 700 Series Color Mobile Computer User’s ManualSetting UpBefore you can connect, you must enter Passport or Exchange account in-formation. To set up an account and sign in:1In the Tools menu, tap Options.2In the Accounts tab, enter your Passport or Exchange account informa-tion.3To sign in, tap the sign-in screen and enter your e-mail address and pass-word.Note: If you already use MSN Messenger on your desktop computer, yourcontacts will show up on your 700 Series Computer without being addedagain.Working with ContactsThe MSN Messenger window shows all of your messenger contacts at aglance, divided into Online and Not Online categories. From this view,while connected, you can chat, send e-mail, block the contact from chat-ting with you, or delete contacts from your list using the pop-up menu.Note: To see others online without being seen, in the Tools menu, tap MyStatus →Appear Offline.If you block a contact, you will appear offline but will remain on theblocked contact’ s list. To unblock a contact, tap and hold the contact, thentap Unblock on the pop-up menu.
Pocket PC 2002—Chapter 255700 Series Color Mobile Computer User’s ManualChatting with ContactsTap a contact name to open a chat window. Enter your message in the textentry area at the bottom of the screen, or tap My Text to enter a presetmessage, and tap Send. To invite another contact to a multi-user chat, inthe Tools menu, tap Invite and tap the contact you want to invite.Note: To switch back to the main window without closing a chat, tap theContacts button. To revert back to your chat window, tap Chats and selectthe person whom you were chatting with.
Pocket PC 2002Chapter —256 700 Series Color Mobile Computer User’s ManualTo know if the contact you are chatting with is responding, look for themessage under the text entry area.For more information on using MSN Messenger, tap Start →Help.
Pocket PC 2002—Chapter 257700 Series Color Mobile Computer User’s ManualWindows Media Player for Pocket PCUse Microsoft Windows Media Player for Pocket PC to play digital audioand video files that are stored on your 700 Series Computer or on a net-work. To switch to Windows Media Player for Pocket PC, tap Start →Programs →Windows Media.Use Microsoft Windows Media Player on your desktop computer to copydigital audio and video files to your Pocket PC. You can play WindowsMedia and MP3 files on your Pocket PC.For more information about using Windows Media Player for Pocket PC,tap Start →Help.
Pocket PC 2002Chapter —258 700 Series Color Mobile Computer User’s ManualMicrosoft ReaderUse Microsoft Reader to read eBooks on your 700 Series Computer.Download books to your desktop computer from your favorite eBook Website. Then, use ActiveSync to copy the book files to your activated 700 Se-ries Computer. The books appear in the Reader Library, where you can tapthem in the list to open them. Each book consists of a cover page, an op-tional table of contents, and the pages of the book. You can:SPage through the book by using the Up/Down control on your 700 Se-ries Computer or by tapping the page number on each page.SAnnotate the book with highlighting, bookmarks, notes, and drawings.SSearch for text and look up definitions for words.The Guidebook contains all the information you will need to use the soft-ware. To open the Guidebook, tap Help on the Reader command bar. Or,on a book page, tap and hold on the book title, and then tap Help on thepop-up menu. To switch to Microsoft Reader, tap Start →Programs →Microsoft Reader.Getting Books on Your 700 Series ComputerYou can download book files from the Web. Just visit your favorite eBookretailer and follow the instructions to download the book files.Sample books and a dictionary are also included in the MSReader folder inthe Extras folder on the Pocket PC Companion CD.Use ActiveSync to download the files from your desktop computer to youractivated mobile computer as described in the Read Me file in theMSReader folder.
Pocket PC 2002—Chapter 259700 Series Color Mobile Computer User’s ManualUsing the LibraryThe Library is your Reader home page; it displays a list of all books storedon your 700 Series Computer or storage card. To open the Library:1On the Reader command bar, tap Library.2On a book page, tap the book title, then tap Library on the pop-upmenu.3To open a book, tap its title in the Library list.
Pocket PC 2002Chapter —260 700 Series Color Mobile Computer User’s ManualReading a BookEach book consists of a cover page, an optional table of contents, and thepages of the book. Navigation options are listed in the bottom portion ofthe cover page.The first time you open a book, you will probably want to go to the firstpage or to the table of contents, if there is one. Subsequently, wheneveryou open the book, you will be automatically taken to the last page read.In addition to the text, each book page includes a page number and booktitle.You can also page through a book by using the Up/Down control on your700 Series Computer.
Pocket PC 2002—Chapter 261700 Series Color Mobile Computer User’s ManualUsing Reader FeaturesReading a book electronically gives you several options not available withpaper books. These options are available from any book page.Select text by dragging across the text on the page. Then, tap an option onthe pop-up menu, as described here:SSearching for TextFind text in a book by tapping Find on the pop-up menu. Enter theword you want to search for, and tap the desired Find option. Readerhighlights found text on the page. To close Find, tap outside the box.To return to your original page, tap the title and then tap Return on thepop-up menu.SCopying TextYou can copy text from books that support this feature into any pro-gram that accepts text. On a book page, select the text you want to copy.Then, tap Copy Text on the pop-up menu. The text can be pasted intothe program of your choice.SAdding BookmarksWhen you add a bookmark to a book, a color-coded bookmark iconappears in the right margin. You can add multiple bookmarks to a book.Then, from anywhere in the book, tap the bookmark icon to go to thebookmarked page.SHighlighting TextWhen you highlight text, it appears with a colored background.SAttaching Notes to TextWhen you attach a note to text, you enter the text in a notepad that ap-pears on top of the book page. A Note icon will display in the left mar-gin. To show or hide the note, tap the icon.SAdding DrawingsWhen you add a drawing, a Drawing icon appears in the bottom-leftcorner of the page, and drawing tools appear across the bottom of thepage. Draw by dragging your stylus.SAnnotations IndexTo see a list of a book’ s annotations, including bookmarks, highlights,text notes, and drawings, tap Annotations Index on the book’ s coverpage. You can tap an entry in the list to go to the annotated page.Removing a BookWhen you finish reading a book, you can delete it to conserve space onyour 700 Series Computer. If a copy of the book is stored on your desktopcomputer, you can download it again at any time.To remove a book from your 700 Series Computer, tap and hold the titlein the Library list, and then tap Delete on the pop-up menu.
Pocket PC 2002Chapter —262 700 Series Color Mobile Computer User’s ManualPocket Internet ExplorerNote: The Professional Edition of Pocket Internet Explorer does not sup-port WAP pages.Use Microsoft Pocket Internet Explorer to view Web or WAP pages in ei-ther of these ways:SDuring synchronization with your desktop computer, download yourfavorite links and mobile favorites that are stored in the Mobile Favor-ites subfolder in Internet Explorer on the desktop computer.SConnect to an ISP or network and browse the Web. To do this, you willneed to create the connection first, as described in “Getting Connected”on page 67.When connected to an ISP or network, you can also download files andprograms from the Internet or intranet.To switch to Pocket Internet Explorer, tap Start →Internet Explorer.The Mobile Favorites FolderOnly items stored in the Mobile Favorites subfolder in the Favorites folderin Internet Explorer on your desktop computer will be synchronized withyour 700 Series Computer. This folder was created automatically whenyou installed ActiveSync.Favorite LinksDuring synchronization, the list of favorite links in the Mobile Favoritesfolder on your desktop computer is synchronized with Pocket Internet Ex-plorer on your 700 Series Computer. Both computers are updated withchanges made to either list each time you synchronize. Unless you markthe favorite link as a mobile favorite, only the link will be downloaded toyour 700 Series Computer, and you will need to connect to your ISP ornetwork to view the content. For more information on synchronization,see ActiveSync Help on the desktop computer.Mobile FavoritesIf you are using Microsoft Internet Explorer 5.0 or later on your desktopcomputer, you can download mobile favorites to your 700 Series Comput-er. Synchronizing mobile favorites downloads Web content to your 700Series Computer so that you can view pages while you are disconnectedfrom your ISP and desktop computer.Use the Internet Explorer plug-in installed with ActiveSync to create mo-bile favorites quickly. To create a mobile favorite:1In Internet Explorer on your desktop computer, click Tools →CreateMobile Favorite.2To change the link name, enter a new name in the Name box.3Optionally, in Update, select a desired update schedule.
Pocket PC 2002—Chapter 263700 Series Color Mobile Computer User’s Manual4Click OK. Internet Explorer downloads the latest version of the page toyour desktop computer.5If you want to download the pages that are linked to the mobile favoriteyou just created, in Internet Explorer on the desktop computer,right-click the mobile favorite just created and then click Properties.Inthe Download tab, specify the number of links deep you want todownload. To conserve 700 Series Computer memory, go only one leveldeep.6Synchronize your 700 Series Computer and desktop computer. Mobilefavorites that are stored in the Mobile Favorites folder in Internet Ex-plorer are downloaded to your 700 Series Computer.Note: If you did not specify an update schedule in step 3 above, you willneed to manually download content to keep the information updated onyour desktop computer and 700 Series Computer. Before synchronizingwith your 700 Series Computer, in Internet Explorer on your desktopcomputer, click Tools →Synchronize. You will see the last time contentwas downloaded to the desktop computer, and you can manually downloadcontent if needed.You can add a button to the Internet Explorer toolbar for creating mobilefavorites. In Internet Explorer on your desktop computer, click View →Toolbars →Customize.Mobile favorites take up storage memory on your 700 Series Computer.To minimize the amount of memory used:SIn the settings for the Favorites information, type in ActiveSync options,turn off pictures and sounds, or stop some mobile favorites from beingdownloaded to the 700 Series Computer. For more information, see Ac-tiveSync Help.SLimit the number of downloaded linked pages. In Internet Explorer onthe desktop computer, right-click the mobile favorite you want tochange and then Properties.IntheDownload tab, specify “0” or “1” forthe number of linked pages you want to download.
Pocket PC 2002Chapter —264 700 Series Color Mobile Computer User’s ManualUsing AvantGo ChannelsAvantGo is a free interactive service that gives you access to personalizedcontent and thousands of popular Web sites. You subscribe to AvantGochannels directly from your 700 Series Computer. Then, you synchronizeyour 700 Series Computer and desktop computer, or connect to the Inter-net to download the content. For more information, visit the AvantGoWeb site. To sign up for AvantGo:1In ActiveSync options on the desktop computer, turn on synchroniza-tion for the AvantGo information type.2In Pocket Internet Explorer on your 700 Series Computer, tap the Fa-vorites button to display your list of favorites.3Tap the AvantGo Channels link.4Tap the Activate button.5Follow the directions on the screen. You will need to synchronize your700 Series Computer with your desktop computer and then tap the MyChannels button to complete the AvantGo setup.When synchronization is complete, tap the AvantGo Channels link inyour list of favorites to see a few of the most popular channels. To add orremove channels, tap the Add or Remove link.
Pocket PC 2002—Chapter 265700 Series Color Mobile Computer User’s ManualUsing Pocket Internet ExplorerYou can use Pocket Internet Explorer to browse mobile favorites and chan-nels that have been downloaded to your 700 Series Computer withoutconnecting to the Internet. You can also connect to the Internet throughan ISP or a network connection and browse the Web.
Pocket PC 2002Chapter —266 700 Series Color Mobile Computer User’s ManualViewing Mobile Favorites and Channels1Tap the Favorites button to display your list of favorites.2Tap the page you want to view.You will see the page that was downloaded the last time you synchronizedwith your desktop computer. If the page is not on your 700 Series Com-puter, the favorite will be dimmed. You will need to synchronize with yourdesktop computer again to download the page to your 700 Series Comput-er, or connect to the Internet to view the page.Browsing the Internet1Set up a connection to your ISP or corporate network using Connec-tions, as described in “Getting Connected” on page 67.2To connect and start browsing, do one of the following:STap the Favorites button, and then tap the favorite you want to view.STap View →Address Bar. In the address bar that appears at the topof the screen, enter the Web address you want to visit and then tapGo. Tap the arrow to choose from previously entered addresses.Note: To add a favorite link while using the 700 Series Computer, go tothe page you want to add, tap and hold on the page, and tap Add toFavorites.
Pocket PC 2002—Chapter 267700 Series Color Mobile Computer User’s ManualGetting ConnectedYou can use your 700 Series Computer to exchange information with oth-er 700 Series Computers as well as your desktop computer, a network, orthe Internet. You have the following connection options:SUse the infrared (IR) port on your 700 Series Computer to send andreceive files between two 700 Series Computers. If this is the methodyou want to use, see “Transferring Items Using Infrared”below.SConnect to your ISP. Once connected, you can send and receive e-mailmessages by using Inbox and view Web or WAP pages by using PocketInternet Explorer. The communication software for creating an ISP con-nection is already installed on your 700 Series Computer. Your serviceprovider will provide software needed to install other services, such aspaging and fax services. If this is the method you want to use, see “Con-necting to an Internet Service Provider” on page 68.SConnect to the network at your company or organization where youwork. Once connected, you can send and receive e-mail messages byusing Inbox, view Web or WAP pages by using Pocket Internet Explorer,and synchronize with your desktop computer. If this is the method youwant to use, see “Connecting to Work” on page 70.SConnect to your desktop computer to synchronize remotely. Once con-nected, you can synchronize information such as your Pocket Outlookinformation. If this is the method you want to use, see ActiveSync Helpon your desktop computer or Connections Help on the 700 SeriesComputer.Transferring Items Using InfraredUsing infrared (IR), you can send and receive information, such as con-tacts and appointments, between two 700 Series Computers.Sending Information1Switch to the program where you created the item you want to send andlocate the item in the list.2Align the IR ports so that they are unobstructed and within a closerange.3Tap and hold the item, and tap Beam Item on the pop-up menu.Note: You can also send items, but not folders, from File Explorer. Tapand hold the item you want to send, and then tap Beam File on the pop-up menu.Receiving Information1Align the IR ports so that they are unobstructed and within a closerange.2Have the owner of the other 700 Series Computer send the informationto you. Your 700 Series Computer will automatically receive it.
Pocket PC 2002Chapter —268 700 Series Color Mobile Computer User’s ManualConnecting to an Internet Service ProviderYou can connect to your ISP, and use the connection to send and receivee-mail messages and view Web or WAP pages. You can connect to yourISP in one of two ways:SCreate a modem connection. If this is the method you want to use, see“Creating a Modem Connection to an ISP”below.SUse an Ethernet card and a net tap to connect to the network. If this isthe method you want to use, see “Creating an Ethernet Connection to anISP” on page 69.Creating a Modem Connection to an ISP1Obtain the following information from your ISP. Some ISPs require in-formation in front of the user name, such as MSN/username.SISP dial-up access telephone numberSUser nameSPasswordSTCP/IP settings2If your 700 Series Computer does not have a built-in modem, install amodem card, or use or use a NULL modem cable and appropriateadapters to connect an external modem to your 700 Series Computerthrough the serial port.3Tap Start →Settings →the Connections tab →Connections.UnderThe Internet settings, select Internet Settings →Modify.4In the Modem tab, tap New.5Enter a name for the connection, such as “ISP Connection.”6In Select a modem list, select your modem type. If your modem typedoes not appear, try reinserting the modem card. If you are using an ex-ternal modem that is connected to your 700 Series Computer with acable, select “Hayes Compatible on COM1.”7You should not need to change any settings in Advanced.MostISPsnow use a dynamically-assigned address. If the ISP you are connectingto does not use a dynamically-assigned address, tap Advanced →theTCP/IP tab, then enter the address. When finished, tap OK →Next.8Enter the access phone number, and tap Next.9Select other desired options, and tap Finish.10 In the Dialing Locations tab, specify your current location and phonetype (most phone lines are tone). These settings will apply to all connec-tions you create.
Pocket PC 2002—Chapter 269700 Series Color Mobile Computer User’s ManualTo start the connection, simply start using one of the following programs.Your 700 Series Computer will automatically begin connecting. Once con-nected, you can:SSend and receive e-mail messages by using Inbox. Before you can useInbox, you need to provide the information it needs to communicatewith the e-mail server. For specific instructions, see “Connecting Directlyto an E-mail Server” on page 72.SVisit Web and WAP pages by using Pocket Internet Explorer. For moreinformation, see “Pocket Internet Explorer” on page 62.SSend and receive instant messages with MSN Messenger. For more in-formation, see “MSN Messenger” on page 53.Creating an Ethernet Connection to an ISP1You do not need to create a new connection on your 700 Series Com-puter. Instead, you must purchase a dock to enable on-board Ethernetor purchase a CompactFlash Ethernet card that is compatible with your700 Series Computer.2Obtain the following information from your ISP:SUser nameSPasswordSDomain name3Insert the Ethernet card into your 700 Series Computer. For instruc-tions on inserting and using the Ethernet card, see the owner’ s manual.If using an on-board Ethernet, place your 700 Series Computer in a dock,tap Start →Today, then look in the System Tray for the Ethernet icon(shown left). If not there, then tap the antenna icon for the NDISTRAYpop-up menu and select Built-in Ethernet from the menu.4The first time you insert the card, Network Settings will appearautomatically so that you can configure the Ethernet card. Mostnetworks use DHCP, so you should not have to change these settingsunless your network administrator instructs you to do so. Tap OK.(Ifitdoes not appear or to change settings later, tap Start →Settings →theConnections tab →Network, tap the adapter you want to change, andthen tap Properties.)SIf using an on-board Ethernet, then select Start →Settings →theConnections tab →Network Adapters. Select “NE2000 CompatibleEthernet Driver” from the list of adapters installed, then tap Proper-ties to configure the Ethernet driver.
Pocket PC 2002Chapter —270 700 Series Color Mobile Computer User’s Manual5Connect the Ethernet card or dock to the network by using a networkcable. For information, see your owner’ s manual.6Tap Start →Settings →the Connections tab →Connections.Fromthe My network card connects to list, select “Internet.”To start the connection, simply start using one of the programs listed inthe preceding section. Once connected, you can perform the same activi-ties as listed in the preceding section.Connecting to WorkIf you have access to a network at work, you can send e-mail messages,view intranet pages, synchronize your 700 Series Computer, and possiblyaccess the Internet. You can connect to work in one of two ways:SCreate a modem connection by using a RAS (Remote Access Server) ac-count. Before you can create this modem connection, your network ad-ministrator will need to set up a RAS account for you. If this is themethod you want to use, see “Creating a Modem Connection to Work”below. Your network administrator may also give you VPN settings.SUse an Ethernet card and a net tap to connect to the network. If this isthe method you want to use, see “Creating an Ethernet Connection toWork” on page 71.Creating a Modem Connection to Work1Get the following information from your network administrator:SDial-up access telephone numberSUser nameSPasswordSDomain nameSTCP/IP settings2If your 700 Series Computer does not have a built-in modem, install amodem card.3Tap Start →Settings →the Connections tab →Connections.UnderThe Internet settings, select Internet Settings and tap Modify.4In the Modem tab, tap New.5Enter a name for the connection, such as “Company Connection.”6In the Select a modem list, select your modem type. If your modemtype does not appear, try reinserting the modem card. If you are usingan external modem that is connected to your 700 Series Computer witha cable, select “Hayes Compatible on COM1.”7You should not need to change any settings in Advanced. Most serversnow use a dynamically-assigned address. If the server you are connectingto does not use a dynamically-assigned address, tap Advanced →theTCP/IP tab and then enter the address. When finished, tap OK →Next.
Pocket PC 2002—Chapter 271700 Series Color Mobile Computer User’s Manual8Enter the access phone number, and tap Next.9Select other desired options, and tap Finish.10 In the Dialing Locations tab, specify your current location and phonetype (most phone lines are tone). These settings will apply to all connec-tions you create.To start the connection, start using one of the following programs. Your700 Series Computer will automatically begin connecting. Once con-nected, you can:SSend and receive e-mail messages by using Inbox. Before you can useInbox, you need to provide the information it needs to communicatewith the e-mail server. For specific instructions, see “Connecting Directlyto an E-mail Server” on page 72.SVisit Internet or intranet Web or WAP pages via Pocket Internet Explor-er.SSend and receive instant messages with MSN Messenger. For more in-formation, see “MSN Messenger” on page 53.SSynchronize. For more information, see ActiveSync Help on the desktopcomputer.Creating an Ethernet Connection to Work1You do not need to create a new connection on your 700 Series Com-puter. Instead, you must purchase a dock to enable on-board Ethernetor purchase a CompactFlash Ethernet card that is compatible with your700 Series Computer.2Obtain the following information from your ISP:SUser nameSPasswordSDomain name3Insert the Ethernet card into your 700 Series Computer. For instruc-tions on inserting and using the Ethernet card, see the owner’ s manual.SIf using an on-board Ethernet, place your 700 Series Computer in adock, tap Start →Today, then look in the System Tray for the Ether-net icon (shown left). If not there, then tap the antenna icon for theNDISTRAY pop-up menu and select Built-in Ethernet from themenu.
Pocket PC 2002Chapter —272 700 Series Color Mobile Computer User’s Manual4The first time you insert the card, Network Settings will appearautomatically so that you can configure the Ethernet card. Mostnetworks use DHCP, so you should not have to change these settingsunless your network administrator instructs you to do so. Tap OK.(Ifitdoes not appear or to change settings later, tap Start →Settings →theConnections tab →Network, tap the adapter you want to change, andthen tap Properties.)SIf using an on-board Ethernet, then select Start →Settings →theConnections tab →Network Adapters. Select “NE2000 CompatibleEthernet Driver” from the list of adapters installed, then tap Proper-ties to configure the Ethernet driver.5Connect the Ethernet card or dock to the network by using a networkcable. For information, see your owner’ s manual.6To synchronize your 700 Series Computer, tap Start →ActiveSync.Inthe Tools menu, tap Options.→the PC tab, select Include PC whensynchronizing remotely and connect to, and select your computer’ sname. Remote synchronization with a desktop computer will work onlyif a partnership is set up with that computer through ActiveSync andActiveSync is set to allow remote connections. Other restrictions apply.For more information, see ActiveSync Help on the desktop computer.To start the connection, simply start using one of the programs listed inthe preceding section. Once connected, you can perform the same activi-ties as listed in the preceding section.Ending a ConnectionTo disconnect, do one of the following:SWhen connected via dial-up or VPN, tap the Connection icon (shownleft) on your navigation bar, and then tap End.SWhen connected via cable or cradle, detach your 700 Series Computerfrom the cable or cradle.SWhen connected via Infrared, move the 700 Series Computer awayfrom the PC.SWhen connected via a network (Ethernet) card, remove the card fromyour 700 Series Computer.Connecting Directly to an E-mail ServerYou can set up a connection to an e-mail server so that you can send andreceive e-mail messages by using a modem or network connection and In-box on your 700 Series Computer.Note: The ISP or network must use a POP3 or IMAP4 e-mail server andan SMTP gateway.You can use multiple e-mail services to receive your messages. For each e-mail service you intend to use, first set up and name the e-mail service. Ifyou use the same service to connect to different mailboxes, set up andname each mailbox connection.
Pocket PC 2002—Chapter 273700 Series Color Mobile Computer User’s ManualSetting Up an E-mail ServiceSIn Inbox on your 700 Series Computer, tap Services →New Service.Follow the directions in the New Service wizard.For an explanation of a screen, tap Start →Help. When finished, to con-nect to your e-mail server, tap Services →Connect. For more informationon using the Inbox program, see “Inbox: Sending and Receiving E-mail Mes-sages” on page 42.
Pocket PC 2002Chapter —274 700 Series Color Mobile Computer User’s Manual
75700 Series Color Mobile Computer User’s ManualInstalling Applications3There are multiple ways to get an application to your 700 Series ColorMobile Computer; just as there are multiple ways to package the applica-tion for delivery.
Installing ApplicationsChapter —376 700 Series Color Mobile Computer User’s ManualPackaging an ApplicationUse any of the following methods to package an application for installa-tion:SFor very simple applications, the application itself might be the only filethat needs to be delivered.SIt could be a directory structure that contains the application, support-ing files like ActiveX controls, DLLs, images, sound files, and data files.SVia a CAB file.Consider either of the following when choosing a location into which tostore your application:SIn the basic 700 Series Computer, there are no built-in storage optionsother than the Object Store. The Object Store is RAM that looks like adisk. Anything copied here will be deleted when a cold-boot is per-formed on the 700 Series Computer.SIf the optional SecureDigital or CompactFlash storage card is in the sys-tem, then consider this card the primary location for placing an applica-tions install files. The following folders represent either card:SThe SecureDigital storage card creates the “\SDMMC Disk” folder.SThe CompactFlash storage card creates the “\Storage Card” folder.SFiles copied to either of these locations will be safe when a cold-boot isperformed on a 700 Series Computer - providing the AutoRun system isinstalled onto the storage card. You can find this system on the RecoveryCD. Copying a CAB file to the “\CABFILES” folder on one of thesecards will automatically extract that CAB file on every cold boot to en-sure that your system is properly set up. See page 82 for more details onhow this works.Installing ApplicationsConsider any of the following options to get the package to the preferredlocation on your 700 Series Computer.SMicrosoft ActiveSyncSFTP Server (page 78)SApplication Manager in Unit Manager (page 78)SSecureDigital or CompactFlash storage card (page 78)
Installing Applications—Chapter 377700 Series Color Mobile Computer User’s ManualUsing Microsoft ActiveSyncNote: These instructions assume that the 700 Color Management Toolsportion of the 700 Series Color Software Tools CD was installed onto yourdesktop.The Microsoft ActiveSync tool is located on the 700C Companion CD,which contains Microsoft products, such as Outlook and ActiveSync. SeeChapter 2, “Pocket PC 2002,” for information about this tool as providedby Microsoft Corporation.This can be a serial, USB, Ethernet, InfraRed, or 802.11b ActiveSync con-nection. Files can then be copied using File Explorer on a PC or a laptopcomputer. This option is usually only good when updating a few 700 Se-ries Computers.These instructions assume that Microsoft ActiveSync had been installedonto your desktop computer and is up and running. If not, go to Chapter2, “Pocket PC 2002,” for an URL from which you can download the latestapplication.1Connect your 700 Series Computer to your desktop computer via anActiveSync cable or IrDA.2Wait for a “Connected” message to appear in the Microsoft ActiveSyncapplication to signal a connection to the 700 Series Computer. If neces-sary, select File →Get Connected to initiate a connection.3Click Explore to access the Mobile Device directory on your 700 SeriesComputer.
Installing ApplicationsChapter —378 700 Series Color Mobile Computer User’s Manual4From your desktop, select Start →Windows Explorer, then browse theapplicable path for any of the system files needed for your 700 SeriesComputer (listed with their paths). Select to highlight the appropriatefile, right-click the file for a pop-up menu, then select Copy.SBase operating system files:“C:\Intermec\Intermec 700 Color Mgmt Tools\Drive Images”SCAB files:“C:\Intermec\Intermec 700 Color Mgmt Tools\Cab Files”5Within the Mobile Device directory, go to the directory where you wantthe files located on the 700 Series Computer, do a right-click for a pop-up menu, then select Paste.6When all of the files are pasted, perform a warm-boot on the 700 SeriesComputer. When the computer reboots, wait for the LED on the topleft of your keypad to stop blinking. Tap Start →Programs →File Ex-plorer to locate the newly copied executable files, then tap these files toactivate their utilities.Using the FTP ServerThe 700 Series Computer has a built-in FTP Server that connects to a net-work via Ethernet or 802.11b. This “ftp”s to the IP address of the 700 Se-ries Computer and places files. The benefit of using FTP is that a scriptcan be created that will automate the process of copying files to the 700Series Computer. This option is good for when a large number of 700 Se-ries Computers need to be updated. See Chapter 7, “Programming,” formore information.Using the Application Manager in Unit ManagerThis requires the 700 Series Computer to connect to the network viaEthernet or 802.11b. The process is still manual so it would take longerthan the FTP method but it would still be a better option than ActiveSyncwhere many 700 Series Computers need to be updated. The Unit Managerapplications are available on the 700 Series Color Unit Manager CD-ROM.For more information, consult your Intermec sales representative.Using a Storage CardThe following steps pertain to installing an application using a storagecard.Copying to a CompactFlash CardFollow the steps below to install your application on the device using aCompactFlash storage card:1Suspend the 700 Series Color Mobile Computer and remove its Com-pactFlash drive, which holds a SanDisk CompactFlash storage card.2Using a CompactFlash Adapter card, place the CompactFlash Drive inyour desktop PC card drive.
Installing Applications—Chapter 379700 Series Color Mobile Computer User’s Manual3Create a subdirectory on the PCMCIA CompactFlash drive in which tostore your application.4Add the autorun system to the storage card using the CEImagerapplication. See the Software Tools User’ s Manual for information aboutCEImager.5Copy your application, data files, and all required DLLs and drivers tothe subdirectory created on the CompactFlash drive.6Add your application to the AUTOUSER.DAT file on the“\Storage Card\2577” directory that contains the following statement,where your directory is the directory on the CompactFlash storage cardwhere the application was installed, and yourapp.exe is the name of yourapplication. Finish the “RUN=” statement with a carriage return line-feed combination. There may be multiple run statements in the file.RUN=\<your directory>\<yourapp.exe>7Remove the CompactFlash drive from your desktop computer and rein-stall it into the 700 Series Computer.8Warm-boot the 700 Series Computer to add these files to the Compact-Flash storage card.If the AUTOUSER.DAT file is found and the “RUN=” statement is cor-rect, then the task manager will launch and execute your program on start-up.Copying to a SecureDigital Storage CardDo the same steps as for the CompactFlash storage Card, except replacethe “\Storage Card\2577” directory with the “\SDMMC Disk\2577” direc-tory.Updating the System SoftwareYou can use the Recovery CD to reinstall or update the operating systemsoftware on the 700 Series Color Computer. For more information, con-tact your Intermec sales representative.
Installing ApplicationsChapter —380 700 Series Color Mobile Computer User’s ManualApplication MigrationNote: These instructions assume that the 700 Color Management Toolsportion of the 700C Software Tools CD was installed onto your desktopand that a storage card has been added to the base configuration of the 700Color Computer.The following steps are required to ensure that the following will happenon a cold-boot:SCAB files can be restored,Sapplications will automatically start,Sand the registry will be restored.Do the following for the cold-boot procedure:1From your desktop, double-click the Intermec CE Imager desktop iconto access the Intermec CEImager application. If this icon is not on yourdesktop, then double-click the CEIMAGER.EXE executable from the“C:\Intermec\Intermec 700 Color Mgmt Tools\Tools\CEImager” folder.2Click Default under Components List to activate the components.3Click (+) to expand the AutoRun System component, click (+) to ex-pand the Destination Media option, then select either the Compact-Flash Card option or the SecureDigital Card option. Do not select bothstorage cards, as the AutoRun files copied will work for one storage card, butnot work on the other storage card.
Installing Applications—Chapter 381700 Series Color Mobile Computer User’s Manual4Click Install to install the AUTORUN files onto the storage card.5Create a “\Cabfiles” folder on the storage card. Copy any CAB files thatare to be extracted on every startup into this folder.6In the “\2577” directory, add your custom AUTOUSER.DAT file. Seethe Recovery Help for more information on how to set up anAUTOUSER.DAT file.7If you are using the RegFlushKey() API, the application must use a spe-cial API to make sure the registry is written to the appropriate card; oryou can use the Utilities control panel applet, as follows:aFrom the 700 Series Computer, tap Start →Settings →the Systemtab →the Utilities icon →the Registry Save tab.bTap Enable Registry Storage, then tap either of the following:SSDTo write the registry to the SecureDigital storage card.SCFTo write the registry to the CompactFlash storage card.cTap ok to save your entry and exit the Utilities control panel applet.Note: If you are using a SecureDigital storage card, you must change anydisk access from “Storage Card” to “SDMMC Disk.”8Remove the storage card from the desktop PC and install the card intothe 700 Series Color Computer.9Perform a cold-boot on the 700 Series Color Computer. Files willautomatically install from the storage card upon reboot. Any calls to theRegFlushKey() API will automatically write the registry to theappropriate location.
Installing ApplicationsChapter —382 700 Series Color Mobile Computer User’s ManualWhen converting a 700 Series Monochrome Computer application to runon the 700 Series Color Computer, most APIs should work without chan-ges. Below are a few exceptions:SThe 700 Series Monochrome Computer used the “\Storage Card” folderfor nonvolatile storage. You may need to change the application to storedata in a volatile location or onto the “SDMMC Disk” if a SecureDigi-tal storage card is present in the system.SIf the application uses the RegFlushKey() API, it must first verify thatthe proper media is available in the system and call the special API men-tioned in Step 7 on the previous page.SIf the application will be using the 700 Color switchable dock, use theAPI to set the proper port on the dock before communications.SSome WAN radio options have changed. Review the WAN radio sectionto determine if any changes will be required in your application.SThe arrow and tab keys are swapped from the way they were on the 700Series Monochrome Computers. Keyboard remapping is available onthe 700 Series Color Computer if these keys need to be changed. Seepage 79 for more details.SNo special SDK is needed to compile applications for the Xscale proces-sor. Targeting the SA1110 processor will create applications that run onthe 700 Series Color Computer.Cabinet File InstallationCAB files (short for cabinet files) are like .ZIP files, plus they register DLLs,create shortcuts, modify registry entries, and run custom set up programs.Tap a CAB file to extract that file or place the CAB file on one of the ap-proved storage devices in the “\Cab Files” folder, then perform a warm-boot on the 700 Series Computer. There are two methods available to ex-tract a CAB file:STap a CAB file to extract it. When using this method, the CAB file isautomatically deleted when the extraction process is successful, unlessthe CAB file is set with the read-only attribute.SUse the AUTOCAB method where all files are extracted when a cold-boot is performed on the 700 Series Computer. This AutoCab applica-tion is on the Recovery CD, see its “Recovery Help” for more informa-tion.
83700 Series Color Mobile Computer User’s ManualNetwork Support4The 700 Series Color Mobile Computer can integrate up to three radios ina single unit, and will automatically install the appropriate software for ra-dio use when the unit is powered on. The Intermec CORE applicationdefaults to the most recently used module. If a module has not yet beenused or set, CORE will default to the first module as listed alphabetically.The following communication options on the 700 Series Computer pro-vide wired and wireless connectivity:SOnboard wired Ethernet (standard)SWireless Local Area Network (LAN)This 802.11b radio option provides up to 11 Mb/sec throughput.SWireless Wide Area Network (WAN)Includes support for GSM/GPRS and CDMA/1xRTT radios.SWireless PrintingThis allows for cable-free communications with peripheral devices, suchas printers, over a ten-meter range. This compatibility is provided via aBluetooth qualified module by Socket Communications.
Network SupportChapter —484 700 Series Color Mobile Computer User’s ManualCOREThe Intermec Common Object Resource Environment (CORE) applica-tion provides a framework for various modules that let you configure andmanage your Intermec products. These modules are software plug-ins thatcan be configuration tools, such as the 802.11b radio configuration mod-ule, or they can provide information on your environment, such as a bat-tery life module.CORE is built into the operating system of every 700 Series Computer.On the 700 Series Computer, tap Start →Programs →the IntermecCORE icon to access this application.CORE modules are collections of specific information. This information isusually related to a particular radio technology, but not always. Eachmodule can display general and detailed information. Tap the General andDetails tabs near the bottom to switch between general and detailedinformation. Note that not all modules will have detailed information.To learn more about this application, see its online help. Tap Start →Help from the menu to see the CORE online help.Note: Once CORE is running, you can return to it by tapping its iconfrom the System Tray via the Today screen. Tap Start →Today →theIntermec CORE three-ring icon (circled in the following illustration).
Network Support—Chapter 485700 Series Color Mobile Computer User’s ManualNetwork AdaptersYour 700 Series Computer can have up to three radios installed. The de-fault network adapter or radio is dependent on what card is inserted inyour 700 Computer. Below are the the network adapters that exist as ofthis publication. See the Developer’s Support web site for the latest infor-mation on network adapters for your unit.Ethernet Communications (LAN9000) - page 86.802.11b Radios (802.11b Wireless LAN driver) - page 87.WWAN (Wireless WAN) - page 110.Wireless Printing (PAN) - page 120.Note that the tip of the antenna attached to your 700 Series Computer iscolor-coded to identify its radio type. Refer to the following to determineyour radio type:Green802.11b diversityRedCDMA (non-Sprint networks)WhiteGPRS US/Canada and CDMA Sprint networksBlueGPRS International
Network SupportChapter —486 700 Series Color Mobile Computer User’s ManualEthernet CommunicationsFollow the steps below to start Ethernet communications on the 700 SeriesComputer. If your system does not contain an 802.11b radio, thenEthernet networking using DHCP will be selected as the default.When “Built-in Ethernet” is selected from the NDISTRY pop-up menu,then the antenna shown to the left will appear in the System Tray. When“No networking” is selected, then this icon will appear with a red “X”above it.From the 700 Series Computer, tap Start →Settings →the Connectionstab →Network Adapters to access the network connections for this unit.Make the changes necessary for your network, then tap ok when finished.Note: “LAN9000” is for Ethernet and ”802.11b Wireless LAN” is for802.11b radios.
Network Support—Chapter 487700 Series Color Mobile Computer User’s Manual802.11b CommunicationsThe 700 Series Computer can integrate the 802.11b radio module alongwith either the GSM/GPRS or the CDMA/1xRTT radio and the WirelessPrinting option. The 802.11b radio module accommodates any WirelessLAN (WLAN) requirements, such as using WLAN access points for cross-docking or load-planning applications.When “Wireless 802.11” is selected via the NDISTRY pop-up menu, thenthe antenna shown to the left will appear in the System Tray.To start 802.11b communications on the 700 Series Computer, tap Start→Settings →the System tab →the Wireless Network icon to access theProfile Wizard for the 802.11b radio module. The Profile Wizard defaultsto the Profiles page.ProfilesUse the Profiles page to add, edit, or delete multiple networking environ-ments for this 802.11b radio. To add a profile from this screen, enter up to32 alphanumeric characters in the Profile field, then tap Add.See“Basic”on page 89 and “Security” on page 90 for more information.Leave Use Profile Name for SSID checked for the SSID (or NetworkName) to use this profile name. If this is cleared (check mark removed),the SSID will default to using the factory-assigned “INTERMEC” net-work name.
Network SupportChapter —488 700 Series Color Mobile Computer User’s ManualSTo add a profile:Tap Add, enter up to 32 alphanumeric characters to name this profile ifyou have not already entered a description in the Profiles page, configu-re the basic and security information for this profile, then click Done toconfigure its basic and security information.SLeave Use Profile Name for SSID checked for the SSID to use this as-signed profile name. If this is cleared (check mark removed), the SSIDwill default to using the factory-assigned “INTERMEC” network name.Go to the next page to continue.STo edit a profile:Select an existing profile from the Profile drop-down list, tap Edit,make the changes needed for this profile (starting in the next para-graph), then tap OK to return to the Profiles page.STo delete a profile:Select a profile from the Profile drop-down list, tap Delete,thentapYesto remove the selected profile.
Network Support—Chapter 489700 Series Color Mobile Computer User’s ManualBasicUse the Basic page to set the network type and radio channel for this pro-file. Click OK to return to the Profiles page.SNetwork type:Tap the drop-down list to select either Infrastructure or Ad-hoc.SSSID (Network Name):This assumes the profile name when Use Profile Name for SSID ischecked on the previous screen, unless another name is entered in thisfield. If you want to connect to the next available network or are notfamiliar with the network name, enter “ANY” in this field. Consult yourLAN administrator for network names.SChannel:If “Ad-hoc” were selected as the network type, then this is enabled. Tapthe drop-down list to select a channel, from 1-15, through which tohandle connections (default is 3).SEnable Power Management:Check this box to conserve battery power (default), or clear this box todisable this feature.
Network SupportChapter —490 700 Series Color Mobile Computer User’s ManualSecurityUse the Security page to set this profile as read-only or to enable WEP(Wired Equivalent Privacy) encryption. Click OK to return to the Profilespage. The following securities are available from the Security Methoddrop-down list. Note that the last three methods are available if you have pur-chased the security package. Contact your Intermec Representative for more in-formation.S802.11 WEP Encryption (next page)S802.1x TLS (page 92)S802.1x TTLS (page 93)SLEAP (page 93)
Network Support—Chapter 491700 Series Color Mobile Computer User’s Manual802.11 WEP Encryption:WEP keys are only needed if they are expected by your clients. There aretwo types available: 64-bit (5-character strings, 12345) (default) and128-bit (13-character strings, 1234567890123). These can be entered aseither ASCII (12345) or Hex (0x3132333435).To enter WEP keys, select “802.11 WEP Encryption” from the SecurityMethod drop-down list. Select a data transmission key from the Data TXKey drop-down list near the bottom of this screen, then enter the encryp-tion key for that data transmission in the appropriate Key # field.
Network SupportChapter —492 700 Series Color Mobile Computer User’s Manual802.1x TLS (Transport Layer Security):TLS is a protocol that ensures privacy between communicating applica-tions and their users on the Internet. To use this protocol, select “802.1xTLS” from the Security Method drop-down list, then enter the following:SClient Key File:Enter the file location where the certificate for your identity is stored.SPassword:Enter the password for the certificate in this field.SSupplicant ID:Enter the user ID associated with this certificate.SServer Cert CN (Certificate Common Name):Enter the common name of your authentication server.SCA List (Certificate Authority):Enter the file location, or path, of the server certificates.
Network Support—Chapter 493700 Series Color Mobile Computer User’s Manual802.1x TTLS (EAP-Tunneled TLS):To use this protocol, select “802.1x TTLS” from the Security Methoddrop-down list, then enter the following:SUsername:Enter your user name for this security protocol.SPassword:Enter your password for this security protocol.SSupplicant ID:Enter “anonymous” unless your administrator indicates otherwise.SServer Cert CN (Certificate Common Name):Enter the common name of your authentication server.SCA List:Enter the file location, or path, of the server certificates.LEAP (Cisco Wireless EAP (Extensible Authentication Protocol)):Enter your unique user name and password to use this protocol.
Network SupportChapter —494 700 Series Color Mobile Computer User’s ManualAdvancedUse this page to secure the configuration for this profile or to make allfields read-only.SMake Profile Read-Only:Check this box, then enter and reenter a password to “lock” or render“read-only” all configurations for this profile. To reverse this step, clearthe check box, then enter the password assigned with the “read-only”status.SCertificates:If “802.1x TLS,” “802.1x TTLS,” or “LEAP” were enabled via the Se-curity tab, then this button will appear. Tap this button to configure theavailable certificates. See “Certificates” on the next page for more infor-mation.
Network Support—Chapter 495700 Series Color Mobile Computer User’s ManualCertificatesUse this page to view, modify, or remove certificates assigned to yourparticular security method. Note that you can also access this page by tappingStart →certificates from the Today screen.SCA Name/IP:Enter a valid CA name or IP address assigned to the certificate in ques-tion. This allows you to enroll the certificate or to browse for its latestinformation.SEnroll File Name:Enter the file name of the certificate to be enrolled.SStore Location:Enter the path where the certificate is to be stored within your 700 Se-ries Computer.SEnroll:Tap this to assign the file entered in Enroll File Name to the locationspecified in Store Location.SCA Vert:Tap this to view the contents of the certificate via the Internet Explorer.SView:Tap this to view information about the certificate, such as to whom thiscertificate was issued, who issued the certificate, and the span of timethe certificate is valid.SRemove:Select a file from the list, then tap this button to delete that file.
Network SupportChapter —496 700 Series Color Mobile Computer User’s ManualImport/ExportUse this page to send a profile or to retrieve a profile to or from anotherlocation within your 700 Series Computer.STo export a profile:Select to highlight a profile, then tap Export. Select from the drop-downlists, the folder, type of files, and location within the folder where theprofile is to go, tap OK to export the profile, tap ok to close the con-firmation screen, then tap OK again to exit the Profile Wizard.
Network Support—Chapter 497700 Series Color Mobile Computer User’s ManualSTo import a profile:Tap Import to access the Open screen, from the drop-down lists, select afolder and file type, then tap a profile from the list provided. Tap ok toclose the confirmation screen, then tap OK again to exit the ProfileWizard.Scan ListUse this Scan List page to monitor network connections, and if lost, to at-tempt to reestablish connections with these networks.Selected ProfileSelect this option to use the profile defined in the Profiles page, then tapOK to exit the Profile Wizard. When connections are lost, attempts will bemade to connect to the specified profile.
Network SupportChapter —498 700 Series Color Mobile Computer User’s ManualScan ListUse this option to select a number of profiles with which to establish con-nections. When connections are lost, attempts will be made to contact eachof the profiles listed, in the order they appear in the list.1Tap this option, then tap Edit Scan List.2Select profiles from the Available Profiles drop-down list, then tap Addto include each selection in the Scan List.3To arrange the hierarchy of profiles, tap to select a profile, then tap ei-ther Move Up or Move Down to move each profile. To remove a pro-file from the list, tap to select that profile, then tap Delete.4Click either ok or Close to return to the Scan List page, then click OKto exit the Profile Wizard.Network Selection APIsThe Network Selection APIs allow the user to change network adapterconfiguration programmatically. Both drivers support the same IOCTLfunction numbers for loading and unloading the drivers.Loading and unloading of the 802.11b driver is performed by the FWV1:device in the system by performing DeviceIOControl() calls to the driver.Loading and unloading of the driver for the built-in Ethernet adapter isperformed by the SYI1: device in the system by performing DeviceIO-Control() calls to the driver.SFor loading an NDIS driver associated with an adapter, the IOCTL isIOCTL_LOAD_NDIS_MINIPORT.SFor unloading NDIS drivers associated with an adapter the IOCTL isIOCTL_UNLOAD_NDIS_MINIPORT.
Network Support—Chapter 499700 Series Color Mobile Computer User’s Manual#include <winioctl.h>#include “sysio.h”void DoLoad(int nDevice) {LPTSTR devs[] = { _T(“SYI1:”), _T(“FWV1:”) };HANDLE hLoaderDev;DWORD bytesReturned;hLoaderDev = CreateFile(devs[nDevice], GENERIC_READ|GENERIC_WRITE, 0,NULL, OPEN_EXISTING, 0, NULL);if (hLoaderDev != INVALID_HANDLE_VALUE) {if (!DeviceIoControl( hLoaderDev, IOCTL_LOAD_NDIS_MINIPORT, NULL, -1, NULL, 0,&bytesReturned, NULL)){MessageBox(NULL, TEXT(“SYSIO IoControl Failed”), TEXT(“Networkloader”),MB_ICONHAND);if (hLoaderDev!=INVALID_HANDLE_VALUE) CloseHandle(hLoaderDev);hLoaderDev = INVALID_HANDLE_VALUE; // bad handle}else {CloseHandle(hLoaderDev);}}}void DoUnload(int nDevice) {LPTSTR devs[] = { _T(“SYI1:”), _T(“FWV1:”) };HANDLE hLoaderDev;DWORD bytesReturned;hLoaderDev = CreateFile(devs[nDevice], GENERIC_READ|GENERIC_WRITE, 0,NULL, OPEN_EXISTING, 0, NULL);if (hLoaderDev != INVALID_HANDLE_VALUE) {if (!DeviceIoControl( hLoaderDev, IOCTL_UNLOAD_NDIS_MINIPORT, NULL, -1, NULL, 0,&bytesReturned, NULL)){MessageBox(NULL, TEXT(“SYSIO IoControl Failed”),TEXT(“Networkloader”),MB_ICONHAND);if (hLoaderDev!=INVALID_HANDLE_VALUE) CloseHandle(hLoaderDev);hLoaderDev = INVALID_HANDLE_VALUE; // bad handle}else {CloseHandle(hLoaderDev);}}}
Network SupportChapter —4100 700 Series Color Mobile Computer User’s ManualThe API provided by Intermec Technologies exposes a limited set of rou-tines that allows a programmer to access and affect the 802.11b networkinterface card from within their application. The routines provided willalso read/write values to the CE registry that pertain to the 802.11b radiodriver. By using the provided functions, a programmer can alter the802.11b parameters of Network Name (SSID), WEP Keys, InfrastructureModes, Radio Channel, and Power Management Modes. A programmercan also retrieve network connect status and signal strength indicationfrom the RF network card.The API is contained within the 80211API.DLL file that should be pres-ent in any load that has the 802.11b networking installed.SNETWLAN.DLLThis file is the 802.11b driver. It will be present in all 700 CE loads thatuse the 802.11b network interface card.S80211API.DLLThis file is an Intermec authored file that provides the programmer witha set of API calls to configure or monitor status of the 802.11b network.SMOD80211.DLLThe CORE module for the 802.11b NIC. It provides the 802.11b sta-tus information displayed when the CORE application is running.S80211CONF.EXEThis is the “Control Panel” for configuring the 802.11b network para-meters. Note that it is an EXE file and is actually called byCPL802.CPL (see below). It is also called by the CORE applicationwhen the “Configuration” button is pressed.SCPL802.CPLA control panel application that does nothing but call80211CONF.EXE.S80211SCAN.EXEInternally manages the Scan List activity.The 80211API.DLL supports an unlimited number of radio configurationprofiles. These profiles are the same as those set by the Wireless Networkcontrol panel applet that runs on the Windows CE unit. You can configuredifferent 802.11b profiles and switch between them using the 802.11 API.See the ConfigureProfile() function on page 106 for more information.
Network Support—Chapter 4101700 Series Color Mobile Computer User’s ManualFunction SummaryBelow are functions available for the 700 Series Color Computer whenenabled with the 802.11b radio module.RadioConnect()Connects to the available radio. Use this function if you plan on using alot of API calls that talk directly to the radio.Syntax: UINT RadioConnect( );Parameters: None.Returns: ERROR_SUCCESS when successful, otherwiseERR_CONNECT_FAILED.RadioDisconnect()Cleans up the connection from the RadioConnect() function after an ap-plication closes.Syntax: UINT RadioDisconnect( );Parameters: None.Returns: ERROR_SUCCESS when successful, otherwiseERR_CONNECT_FAILED.GetMac()Gets the radio MAC address.Syntax: UINT GetMac( TCHAR * );Parameters: Pointer to a character array, which is populated with MAC addresses.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.GetBSSID()Gets the associated access point name, the BSSID.Syntax: UINT GetBSSID( TCHAR * );Parameters: Pointer to a character array, which is populated with the current BSSID.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failedGetSSID()Gets the current SSID (network name).Syntax: UINT GetSSID( TCHAR * );Parameters: Pointer to a character array, which is populated with the current SSID.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.
Network SupportChapter —4102 700 Series Color Mobile Computer User’s ManualGetLinkSpeed()Retrieves the current link speed of the radio connection.Syntax: UINT GetLinkSpeed( int &);Parameters: &References an integer.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.GetNetworkType()Retrieves the network type.Syntax: UINT GetNetworkType( ULONG &);Parameters: &References a ULONG value, populated with one of the following:NDIS_NET_TYPE_FH Frequency Hopping RadioNDIS_NET_TYPE_DS Direct Sequence RadioNDIS_NET_TYPE_UNDEFINEDUnknown or information not available.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.GetTXPower()Gets the current TX power of the radio in milliwatts.Syntax: UINT GetTXPower( ULONG &);Parameters: &References a ULONG value, populated with one of the followingin milliwatts (mW):NDIS_POWER_LEVEL_63 63 mW.NDIS_POWER_LEVEL_30 30 mW.NDIS_POWER_LEVEL_15 15 mW.NDIS_POWER_LEVEL_5 5mW.NDIS_POWER_LEVEL_1 1mW.NDIS_POWER_LEVEL_UNKNOWNUnknown Value or Error.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.
Network Support—Chapter 4103700 Series Color Mobile Computer User’s ManualGetNetworkMode()Retrieves the network mode.Syntax: UINT GetNetworkMode( ULONG &);Parameters: &References a ULONG value, populated with one of the following:NDIS_NET_MODE_IBSS 802.11 Ad-Hoc Mode.NDIS_NET_MODE_ESS 802.11 Infrastructure Mode.NDIS_NET_MODE_UNKNOWN Unknown Value or Error.NDIS_NET_AUTO_UNKNOWNAutomatic Selection. Use of this option is not recommended.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.SetNetworkMode()Sets the radio and updates the CE registry.Syntax: UINT SetNetworkMode( ULONG &);Parameters: &References a ULONG value, populated with one of the values definedin GetNetworkMode().Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.AddWep()Adds a WEP key to the radio configuration.Syntax: UINT AddWep( ULONG 1, BOOL 2, TCHAR * 3);Parameters: ULONG Pointer that identifies what key to be set.BOOL Specifies whether the key being set is the default TX key.TCHAR Pointer that specifies the key data either in hex (stringlengths of 10 or 26) or ASCII (string lengths of 5 or 13).Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.GetRSSI()Sets the current RSSI (Received Signal Strength Indication).Syntax: UINT GetRSSI( ULONG & );Parameters: &References a ULONG value.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.
Network SupportChapter —4104 700 Series Color Mobile Computer User’s ManualGetAssociationStatus()Gets the current connection, or association status.Syntax: UINT GetAssociationStatus( ULONG &);Parameters: &References a ULONG value, a current connection status as follows:NDIS_RADIO_ASSOCIATED Radio is associated w/access point.NDIS_RADIO_SCANNING Radio is scanning for network.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.GetWepStatus()Gets the current WEP status.Syntax: UINT GetWepStatus( ULONG &);Parameters: &References a ULONG status value which include the following:NDIS_RADIO_WEP_ENABLED WEP is currently enabled.NDIS_RADIO_WEP_DISABLED WEP is currently disabled.NDIS_RADIO_WEP_ABSENT WEP key is absent.NDIS_RADIO_WEP_NOT_SUPPORTEDWEP is not supported.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.GetAuthenticationMode()Gets the current authentication mode.Syntax: UINT GetAuthenticationMode( ULONG &);Parameters: &References a ULONG value which include the following currentauthentication mode:NDIS_RADIO_AUTH_MODE_OPEN Open System is in use.NDIS_RADIO_AUTH_MODE_SHARED Shared Key is in use.NDIS_RADIO_AUTH_MODE_AUTO Automatic Detection.NDIS_RADIO_AUTH_MODE_ERROR Unknown value/Error.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.SetAuthenticationMode()Sets the radio authentication mode with a value defined in theGetAuthenticationMode() function.Syntax: UINT SetAuthenticationMode( ULONG );Parameters: Passes in a ULONG set to one of the values as defined inGetAuthenticationMode().Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.
Network Support—Chapter 4105700 Series Color Mobile Computer User’s ManualSetChannel()Sets the radio channel, ranging from 1 to 14.Syntax: UINT SetChannel( USHORT );Parameters: USHORT set to a desired channel (1-14).Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.EnableWep()Enables or disables WEP encryption.Syntax: UINT EnableWep( BOOL );Parameters: Set to TRUE (0) to enable WEP encryption or FALSE (1) to disabledWEP encryption.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.GetPowerMode()Gets the current power management mode of the radio.Syntax: UINT GetPowerMode( ULONG &);Parameters: &References a ULONG value which include the following current radiopower management mode:NDIS_RADIO_POWER_MODE_CAMContinuous Access Mode (uses most power).NDIS_RADIO_POWER_MODE_MAXMaximum Power Savings.NDIS_RADIO_POWER_MODE_PSPPower Saving Mode, best balance of power and performance.NDIS_RADIO_POWER_UNKNOWNUnknown mode reported or error.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.SetSSID()Passes the desired SSID (network name).Syntax: UINT SetSSID( TCHAR * );Parameters: Pointer to a character array that contains the desired SSID.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.
Network SupportChapter —4106 700 Series Color Mobile Computer User’s ManualisOrinoco()Confirms whether the present radio is an ORiNOCO radio.Syntax: UINT isOrinoco( );Parameters: None.Returns: TRUE when an ORiNOCO radio.FALSE when other than an ORiNOCO radio.EncryptWepKeyForRegistry()Encrypts a key for registry storage. Requires TCHAR pointers for a des-tination and a source.Syntax: UINT EncryptWepKeyForRegistry( TCHAR * szDest, TCHAR *szSource );Parameters: szDest String for the destination.szSource String for the source.Returns: ERROR_SUCCESS when successful,ERR_QUERY_FAILED when the query failed, orERR_CONNECT_FAILED if a connection with the radio failed.SetRTSThreshold()Sets the radio RTS (Request To Send) threshold.Syntax: UINT SetRTSThreshold( USHORT &);Parameters: &References a USHORT value.Returns: None.GetRTSThreshold()Gets the radio RTS threshold.Syntax: UINT GetRTSThreshold( USHORT &);Parameters: &References a USHORT value.Returns: None.ConfigureProfile()If using the Intermec 802.11b Profile Management system, you can pro-gram the API to configure the radio to a specific profile by passing the pro-file name.Syntax: UINT ConfigureProfile( TCHAR * );Parameters: Pointer to a string that contains the name of the profile to be activated.Returns: None.
Network Support—Chapter 4107700 Series Color Mobile Computer User’s ManualStartScanList()If a scan list is configured, this will start the API looking for a network onthat scan list and configuring the radio appropriately. This call can take along time to process.Syntax: UINT StartScanList( );Parameters: None.Returns: None.802.11b Radio CORE ModuleThe 802.11b radio CORE module displays helpful information about the802.11b radio option built into your 700 Series Computer.Note that you can configure the 802.11b radio module from this COREapplication. Select Configure →Configure 802.11 CF from the bottommenu bar to access the Profile Wizard application. Information about thisapplication starts on page 87.Select Modules →Intermec 802.11 CF Help for more information onthe contents of this CORE module.GeneralBelow are descriptions and meanings for each piece of information pro-vided via the General tab, reading from top to bottom starting on the left.SESS 802.11 Station:This identifies the type of network to which you are attached, either anESS (Embedded Security Subsystem) Station, or Ad-hoc.SAdapter MAC:This identifies the MAC address for this 802.11b adapter.SScanning:Status of association. When connected to a network, this changes to“Connected to NET” with NET being the name of the network towhich you are connected.
Network SupportChapter —4108 700 Series Color Mobile Computer User’s ManualSEncryption:This indicates whether WEP encryption is “Enabled” or “Disabled(Open).” See page 90 for more information.SLink:This indicates the speed at which a connection is made.STX Power:This shows the speed (in milliwatts) at which transmissions are made.SSignal:This identifies the radio signal strength (in dBm).SAntenna:This identifies the antenna being used with the assigned profile.SAP Mac:This identifies the MAC address of the access point to which this 700Series Computer is connected.SIP:This provides the IP address which can be set as either DHCP (Dynam-ic Host Configuration Protocol) or statically.SPower:This indicates the power status of this 700 Series Computer: “AlwaysOn” is the default.SHistory:This bar graph displays an active history of this radio module’ s qualityof connections.SFriendly Indicator:If the radio stack is loaded, then all three dots are filled. These dots areleft empty if the stack is not loaded. These dots do vary based on theCORE application’ s perception of the overall connection quality.
Network Support—Chapter 4109700 Series Color Mobile Computer User’s ManualDetailsBelow are descriptions and meanings for each piece of information pro-vided via the Details tab, reading from top to bottom.SAttach-Roam Cnt:This includes the number of new associations made during the currentsession, including any found roaming.SScanlist:This indicates whether the Scan List option was enabled or disabled. Seepage 97 for more information.SWatchdog Status:This monitors the activity of the Scan List: “Running” or “Stopped.”SSupplicant:This monitors the 802.1x security activity on the client: “Running” or“Stopped.”
Network SupportChapter —4110 700 Series Color Mobile Computer User’s ManualWWAN Radio OptionsThe 700 Series Computer can integrate either the GSM/GPRS or theCDMA/1xRTT radio along with the 802.11b radio and the WirelessPrinting option. The WWAN radio option accommodates any WirelessWAN requirements, such as taking the 700 Series Computer off the prem-ises in a delivery vehicle to cover a much larger area.GSM/GPRSThe GSM (Global System for Mobile communications) and GPRS (Gen-eral Packet Radio Service) wireless infrastructure increases voice capacity,enables personalized “user-aware” services, and creates networking efficien-cies to help wireless service providers drive reduced operating costs.SGSM is an open, nonproprietary system. One of its great strengths isthe international roaming capability. This provides seamless and same-standardized same-number contactability world-wide. GSM satelliteroaming has extended service access to areas with unavailable terrestrialcoverage.SGPRS is the high-speed data evolution of GSM. GPRS supports Inter-net Protocol (IP), enabling access to Internet and intranet content andapplications from GPRS wireless devices. The anticipated data rate forGPRS is 115 Kbps and throughput rates of 30-60 Kbps have beenachieved initially. This high speed capability enables vehicle applicationsto become real-time and to use the Internet for access to corporate dataor information in the form of traffic or navigation.CDMA/1xRTT SB555Code Division Multiple Access (CDMA) is a form of “spread-spectrum,” afamily of digital communication techniques used in military applicationsfor years. The core principle of spread-spectrum is the use of noise-likecarrier waves, and, as the name implies, bandwidths much wider than thatrequired for simple point-to-point communication at the same data rate.S1XRTT, the first phase of CDMA2000, is designed to support up to144 KB per second packet data transmission and to double the voicecapacity of current generation CDMA networks.SSB555 Embedded Module, from Sierra Wireless, provides completewireless functionality and integrates easily into the most compact andslender mobile applications with its small flexible design. The SB555offers maximum coverage and access to entire CDMA networks.
Network Support—Chapter 4111700 Series Color Mobile Computer User’s ManualWAN Radio CORE ModuleThe WAN radio CORE module displays helpful information about eitherthe GSM/GPRS radio or the CDMA/1xRTT radio option built into your700 Series Computer. The following illustrations are for a GSM/GPRSGEM350X radio.GeneralBelow are descriptions and meanings for each piece of information pro-vided via the General tab, reading from top to bottom starting on the left.The information applies to both the GSM/GPRS and the CDMA/1xRTT ra-dio modules unless otherwise indicated.SNetwork Type:This is the network type which would list either “GSM-GPRS” or“CDMA-1XRTT.” Scatternets are not supported.SIWS (GSM/GPRS) or Sprint PCS Network (CDMA/1xRTT):This lists the name of the wireless network provider, such as T-Mobile,Voicestream, AT&T Wireless, etc. “IWS” is short for the Iowa WirelessService carrier.SRegistered on home network:If the WAN radio module has registered with a service provider net-work, then one of the following will appear:SRegistered on home network:The radio module is registered on its “home” network.SRegistered on roamed network:The radio module is registered on another service provider’ s network.SRadio Not Registered:There is no network within range of this radio module.SRadio ESN:This displays the Electronic Serial Number (ESN) assigned to this radiomodule or lists “Unavailable” if a number cannot be read from the ra-dio.
Network SupportChapter —4112 700 Series Color Mobile Computer User’s ManualSRSSI:This displays the Received Signal Strength Indicator (RSSI) frequency orlists “Unavailable” if there is no signal or the signal cannot be retrievedfrom the radio module.SBER (GSM/GPRS GEM 350X, CDMA/1xRTT):This shows the Bit Error Rate (BER), the percentage of bits with errorsdivided by the total number of bits transmitted, received, or processedover a given period of time.Sf/w:This identifies the firmware version, if available.Sh/w:This identifies the hardware version, if available.SSerial Status:This indicates whether serial communications passed (“Serial com OK”)or failed (“Serial com FAIL”) in its last transaction. A status of “Serialcom FAIL” typically indicates that the 700 Series Computer is unable toestablish communication with the radio module installed within.SXircom GEM3503 (GSM/GPRS),Siemens MC45 (GSM/GPRS),orSierra Wireless SB555 (CDMA/1xRTT):This identifies the product name for this radio module.SBand (GSM/GPRS) or Channel (CDMA/1xRTT):This identifies the bandwidth or channel available for this radio module,if any.SHistory:This bar graph displays an active history of this radio module’ s qualityof connections.SFriendly Indicator:Usually indicates the signal strength for this radio module. Three filleddots indicate a high quality or strong signal. Three empty dots indicatethat the signal is out of range or there is no signal detected.
Network Support—Chapter 4113700 Series Color Mobile Computer User’s ManualDetailsBelow are descriptions and meanings for each piece of information pro-vided via the Details tab, reading from top to bottom. Most of this is simi-lar to what is shown under the General tab. The information applies to boththe GSM/GPRS and the CDMA/1xRTT radio modules unless otherwise indi-cated.SSerial Status:This indicates whether serial communications passed (“PASS”) or failed(“FAIL”) in its last transaction. A status of “FAIL” typically indicatesthat the 700 Series Computer is unable to establish communicationwith the radio module installed within.SManufacturer:This lists the name of the manufacturer that developed this radio mod-ule, such as “Xircom, an Intel Corporation,” “Siemens,” or “Sierra Wire-less.”SModel:This identifies the product name for this radio module, such as“SB555,” “GEM350X,” or “MC45.”SIMEI # (GSM/GPRS):This is the IMEI (International Mobile station Equipment Identity) se-rial number of the GSM/GPRS radio module.SRSSI:This displays the RSSI frequency or lists “Unavailable” if there is no sig-nal or the signal cannot be retrieved from the radio module.SOperator:This lists the name of the service providing the network support.SSIM Status (GSM/GPRS MC45):Identifies whether a Subscriber Identity Module (SIM) card is installedin this 700 Series Computer.
Network SupportChapter —4114 700 Series Color Mobile Computer User’s ManualSBand (CDMA/1xRTT):This identifies the frequency bands used by this radio module.SIMSI # (GSM/GPRS):This shows the IMSI (International Mobile Subscriber Identity) numberassigned to the SIM card installed in this 700 Series Computer.SRadio Temp (CDMA/1xRTT):This identifies the temperature of the radio module, or lists “Unavail-able degrees” if there is no information or the temperature cannot bemeasured.SFirmware Rev:This identifies the firmware version, if available.SFirmware Date (GSM/GPRS):This provides the last date when this firmware was updated, if available.Terminal ApplicationTap Terminal App from the Details page to send standard AT commands.Information about these AT commands are available under “AT CommandInterface” on page 115.Select an AT command from the drop-down list, then tap Send. The re-sults of each test appears in the text box. Tap Exit or ok to close this screenand return to the Details page.
Network Support—Chapter 4115700 Series Color Mobile Computer User’s ManualPhone ApplicationWith the WAN radio module installed in your 700 Series Computer, youcan send and receive telephone calls. Use the speaker on the back of thecomputer as your earpiece and use the connector on the bottom of thecomputer for your mouthpiece.Tap Phone App from the Details page to access the application which willprocess your phone calls. Tap Exit or ok to close this application andreturn to the Details page.STap the numbers for a phone call, using Clear to erase each digit, thentap Send to initiate the call.STap Answer to receive an incoming call.STap End to disconnect a transaction.STap Vol ^ or Vol v to adjust the speaker volume.STap Mic ^ or Mic v to adjust the microphone sensitivity.AT Command InterfaceThis interface specification is based on the following recommendation:SETSI GSM 07.05:European Digital Cellular Telecommunication System (phase 2)Use of DTE-DCE interface for Short message and cell broadcast service.SETSI GSM 07.07:European Digital Cellular Telecommunication System (phase 2)AT command set for GSM Mobile Equipment.SITU-T Recommendation V.25 terSerial asynchronous automatic dialing and control.
Network SupportChapter —4116 700 Series Color Mobile Computer User’s ManualNote: You will need the Adobe Acrobat Reader application to view a PDFdocument.Goto“http://www.adobe.com/prodindex/acrobat/readstep.html”to install or download the latest Adobe Acrobat Reader according toAdobe’ s instructions.Command Set for Sierra Wireless SB555Use the AT command interface from Sierra Wireless to program theCDMA/1xRTT SB555 radio module. Documentation for this interface isavailable via the following URL. Click the “General AT command refer-ence” link for a PDF document, which is 680 KB in size. Note that thisURL is subject to change.http://www.sierrawireless.com/ProductsOrdering/embedded_docs.htmlCommand Set for Xircom/Intel GEM350XUse the GEM350X AT command list from Intel Corporation to programthe GPRS/GSM GEM350X radio module. The “GEM350X Programmer’ sReference” is available either from Intermec Technologies or from IntelCorporation. Contact either your Intermec representative or the Intel Cor-poration support personnel at the following URL for more information.Note that this URL is subject to change.http://support.intel.com/sites/support/index.htm?iid=intelhome1+support&Command Set for Siemens MC45Use the MC45 AT command interface from Siemens AG to program theGPRS/GSM MC45 radio module. The “MC45 Siemens Cellular EngineAT Command Set” is available either from Intermec Technologies or fromSiemens AG. Contact either your Intermec representative or the SiemensAG support personnel at the following URL for more information. Notethat this URL is subject to change.http://www.siemens-mobile.com/btob/CDA/presentation/ap_btob_cda_presentation_frontdoor/0,2950,12,FF.html
Network Support—Chapter 4117700 Series Color Mobile Computer User’s ManualTesting the AT CommandsThese commands can be sent to either WAN radio by setting up a dial-upnetworking connection to COM4. Do the following to initiate this con-nection and test these commands to your radio:1From the 700 Series Computer, select Start →Settings →theConnections tab →the Connections icon.2Tap Modify beneath the Internet Settings drop-down list.3Tap New.. to make a new connection.
Network SupportChapter —4118 700 Series Color Mobile Computer User’s Manual4Enter a name for the connection, select “WANA on COM4” from theSelect a modem drop-down list, and select “115200” from the Baudrate drop-down list. Tap Advanced to continue.5On the Port Settings tab, check Enter dialing commands manually,then tap ok,Next, then Finish to return to the Internet Settings screenwith your new connection.
Network Support—Chapter 4119700 Series Color Mobile Computer User’s Manual6Press and hold the new connection for a pop-up menu, then tapConnect to initiate the connection. Wait for about ten seconds for theNetwork Log On screen, then tap OK.Note: You do not need to enter anyinformation within the Network Log On screen.7Use either the onscreen keyboard, or press the keys to type any of theAT commands provided by Sierra Wireless. Press or tap Enter to sendeach command. The results of each command sent will print onscreen -see the sample illustration below. Note that each “AT” command muststart with either the “at” or “at+” characters.STo see what you typed onscreen, type “ate1” to initiate the AT Echocommand, then press Enter.
Network SupportChapter —4120 700 Series Color Mobile Computer User’s ManualWireless PrintingThe 700 Series Computer can integrate the Wireless Printing option(which is equipped with a Bluetooth qualified module by Socket Communica-tions) along with either the GSM/GPRS or the CDMA/1xRTT radio andthe 802.11b radio. This option uses the network to print informationstored on the 700 Series Computer.“Bluetooth” is the name given to a technology standard using short-rangeradio links, intended to replace the cables connecting portable and fixedelectronic devices. The standard defines a uniform structure for a widerange of devices to communicate with each other, with minimal user ef-fort. Its key features are robustness, low complexity, low power, and lowcost. The technology also offers wireless access to LANs, the mobile phonenetwork, and the internet for a host of home appliances and portablehand-held interfaces.DocumentationInformation about additional “Bluetooth” software, including the Blue-tooth Device Manager and the BTctrl program, can be found within theWireless Printing SDK. This is located on the 700C Software Tools CD,via the directory off the root of the toolkit called “Wireless Printing SDK.”It also can be found in the Wireless Printing Development Guide,alsoonthe700C Tools CD.Bluealps CORE ModuleThe Bluealps CORE module displays helpful information about this Wire-less Printing option within your 700 Series Computer. Below are descrip-tions and meanings for each piece of information provided via the Generaltab, reading from top to bottom starting on the left.
Network Support—Chapter 4121700 Series Color Mobile Computer User’s ManualSBluetooth Point to Point:This is the network type. “Point to Point” is the type of connection sup-ported as of this publication. Scatternets are not supported. The only sup-ported application is wireless printing to Intermec wireless printers, suchas the 781T Belt-Mount Printer.SDevice Address:This provides the network address, which in this case, will be replacedby the device address of the Bluetooth compatible module within your700 Series Computer. Note that this address is universally unique.SDiscoverable:The following is displayed depending on whether the 700 Series Com-puter is configured to be discoverable:“Gen” Generally discoverable“Lim” Limited discovery“No” Not discoverableSConnectable:This defines whether the 700 Series Computer is able to accept otherdevices with Bluetooth compatible modules connecting to it. “Yes” if theconnection is doable, “No” if not.SBondable:This defines the security element of the 700 Series Computer, which isthe bondable setting. If the unit is bondable, then “Yes” is displayed,otherwise “No” is displayed.SModule Firmware:This reflects the firmware (hardware) version of the 700 Series Comput-er. When the CORE module first installs onto the unit, the firmwarelevel is unknown, thus “...reading” is displayed. Once the firmware levelis read from the unit, then a three-digit decimal is displayed.SStack [Stack Version] [loaded/not loaded]:[Stack Version] displays the Bluetooth stack version, which appears in the“1.2.3.4” format. If the stack is loaded, then “loaded” is displayed afterthe stack version, otherwise “not loaded” is displayed.SDevice Name:This displays the device name as assigned to the Bluetooth compatiblemodule by the end-user. If the configured name is longer than the spaceallowed, it will be truncated.SBTpak Version:This displays the driver version of additional Bluetooth componentswithin the 700 Series Computer and is usually presented in the “1.2.3”format. The version may also contain a letter at either end.SHistory:This bar graph displays an active history of this wireless printer driver’ squality of connections.SFriendly Indicator:If the Bluetooth stack is loaded, then all three dots are filled. These dotsare left empty if the stack is not loaded. These dots do vary based on theCORE application’ s perception of the overall connection quality.
Network SupportChapter —4122 700 Series Color Mobile Computer User’s ManualAutoIP/DHCPAutomatic Private IP Addressing (AutoIP) is enabled by default in PocketPC 2002. To remain compatible with other Pocket PC devices, this settingneeds to be enabled. You can configure the registry settings in thefollowing to set the required AutoIP/DHCP behavior:SFor Ethernet: HKEY_LOCAL_MACHINE\Comm\LAN9001\TcpIpSFot 802.11b: HKEY_LOCAL_MACHINE\Comm\NETWLAN1\TcpIpOther registry keys that can modify the behavior of AutoIP are as follows.You can find the appropriate settings and behavior of each of these keys inMicrosoft Help.SAutoIntervalSAutoMaskSAutoSubnetSAutoIPSAutoSeedWhen a TCP/IP client cannot find a DHCP server, it generates an AutoIPaddress from the 169.254.xxx.xxx block. The client then tries to check fora DHCP server every 300 seconds (5 minutes) and if a DHCP server isfound, the client drops the AutoIP address and uses the address from theDHCP server.In the MSDN Windows CE documentation, see “Automatic Client Config-uration” for more information on AutoIP.To disable AutoIP, set the AutoCfg registry entry to “0.” If a DHCP servercannot be found, instead of using AutoIP, the system will display the “Un-able to obtain a server assigned IP address” message.Note: If AutoIP is defined using CAB files, the EnableDHCP registry keymust also be defined and set to “1” before the system will attempt to ob-tain a DHCP address.To extend the number of attempts that a DHCP client makes to get aDHCP address, use the DhcpRetryDialogue and DhcpMaxRetry registrysettings.Change the AutoInterval registry key value to make the client retry moreoften to obtain a DHCP address.
Network Support—Chapter 4123700 Series Color Mobile Computer User’s ManualSNMP ConfigurationSimple Network Management Protocol (SNMP) was developed in the late1980s to provide a general-purpose internetworking management protocol.Its primary goal was to be simple so nothing would stand in the way of itsubiquitous deployment. To this end, it has been very successful as it is cur-rently deployed in almost every major internetworking product on themarket. However, like many achieved goals, the primary strength can alsobecome a weakness.The Focus was “Simple”An extreme example of simplicity versus power can be realized by compar-ing SNMP against the Common Management Information Protocol(CMIP), the ISO entry to the standard management protocol world.CMIP has a very rich set of primitives and a core set of data elements.However, to implement CMIP, a subset of the protocol must be selected.Then, to achieve interoperability, this subset must be agreed upon withother implementors. As SNMP was specified completely and with no op-tions, one implemented what was there and interoperability was assured.Returning to simplicity, SNMP was built simply for a number of reasonsother than time to market: robustness in the face of network failure, lowoverhead in the devices running the protocol; and ease of debugging theprotocol itself (the last thing you want to debug is the management protocolthat is supposed to be helping you debug your network). Thus, the SNMPlimited itself to the User Datagram Protocol (UDP). This gave theimplementor the ability and responsibility to manage lost packets andperform any necessary retransmissions. As network debugging in the faceof changing routes will certainly mean losing packets, retaining this controlfrom the transport service (layer 4) was considered essential. Since anetwork management protocol will run continuously, it is mandatory thatit consume as minimal a network resource as possible. UDP allows thenecessary control over packet transmissions, packet size and content(packetization). It is a natural choice.Using SNMPSNMP has three control primitives that initiate data flow from therequester (get, get-next, and set). There are two control primitives theresponder uses to reply. One is used in response to the requester’ s directquery (get-response) and the other is an asynchronous response to obtainthe requester’ s attention (trap). All five of these primitives are carried byUDP and are thus limited in size by the amount of data that can fit into asingle UDP packet. The relatively small message size was a goal of thedesign but for some reasonable set of network management functions, itimposes a limitation.Often in network management, it is necessary to obtain bulk informationwithout knowing at first what is in that bulk. In one case, there is a set ofproblems having to do with packets not going where they are supposed to,due to device misconfiguration that prevents proper protocol operationwhere one needs to view the entire set of data.
Network SupportChapter —4124 700 Series Color Mobile Computer User’s ManualRetrieval of Management InformationSNMP has the get-next primitive which permits the viewing of datawithout requiring prior knowledge. If you know what you are looking for,the get primitive will return it. When you want an entire table ofinformation, the get-next primitive will obtain it. However, unlessemployed with care, the get-next primitive can be extremelyresource-intensive in real time, network bandwidth, and the agent’ s CPUtime. The simplest use of the get-next primitive is to start at the beginningof a table, await the response and then issue another get-next with thename returned. As an example, say you wanted the next-hop address,next-hop interface, and route-type from a routing table containing 1000entries. Using the simplest form of get-next, this would require 2x3x1000or 6000 packets (get-next and get-response packets, columns, and rows).Astraight-forward optimization would be to request the three columns in asingle packet. This puts the number of packets at 2x1000 or 2000 packets.In real time, it is the product of the round trip by the number of request.In agent CPU time, this is still 6000 lookups in the routing table for bothcases.An Early Approach to Getting More than One Item at a TimeThe ability to retrieve only one piece or object at a time has been aproblem for SNMP. This is particularly an issue with the use of thisprotocol in wireless environments where the wireless datapipe is small andoverhead due to network management it is considered overhead. Oneapproach creates multiple get-next requests running concurrently. A secondalgorithm, reduces the packet count by combining the multiple concurrentget-nexts into a single packet. Neither approach has been implementedwhich makes network management in wireless environment, thoughessential to the success of the operation, tenuous. The issue has beenresolved in SNMP V2 protocol where a get-bulk primitive has beendefined.ConclusionSoftware development moves forward by evolving the unknown into theknown and wireless environments are moving from vertical onlyapplication to wide spread implementation. At the time of the SNMPinception, it was not possible to conceive of a reliable transport basednetwork management protocol. Today’ s problems require moresophisticated data to analyze a problem. This puts the burden back on theprotocol to send and receive data quickly and efficiently. Work continuesin subcommittees to improve SNMP and resolve the issues that aredeveloping with new applications and new network architectures.
Network Support—Chapter 4125700 Series Color Mobile Computer User’s ManualSNMP Configuration on the 700 Series ComputerIn short, SNMP is an application-layer protocol that facilitates the ex-change of management information between network devices. The 700Series Computer is such an SNMP-enabled device. Use SNMP to controland configure the 700 Series Computer anywhere on an SNMP-enablednetwork.The 700 Series Computer supports four proprietary Management Infor-mation Bases (MIBs) and Intermec Technologies provides SNMP supportfor MIB-II through seven read-only MIB-II (RFC1213-MIB) ObjectIdentifiers (OIDs).Note: You can only query these seven OIDs through an SNMP manage-ment station, these are not available in the Unit Manager applications.Management Information BaseThe Management Information Base is a database that contains informationabout the elements to be managed. The information identifies the manage-ment element and specifies its type and access mode (Read-Only, Read-Write). MIBs are written in ASN.1 (Abstract Syntax Notation.1) - a ma-chine independent data definition language. Note: Elements to be managedare represented by objects. The MIB is a structured collection of such objects.You will find the following MIB files either on the 700C Tools CD or onthe web via http://www.intermec.com:SINTERMEC.MIBDefines the root of the Intermec MIB tree.SITCADC.MIBDefines objects for Automated Data Collection (ADC), such as bar codesymbologies.SITCSNMP.MIBDefines objects for Intermec SNMP parameters and security methods,such as an SNMP security IP address.SITCTERMINAL.MIBDefines objects for 700 Series parameters, such as key clicks.
Network SupportChapter —4126 700 Series Color Mobile Computer User’s ManualObject IdentifiersEach object has a unique identifier called an OID. OIDs consist of a se-quence of integer values represented in dot notation. Objects are stored ina tree structure. OIDs are assigned based on the position of the object inthe tree. Seven MIB OIDs are shown in the followig table.ExampleThe internet OID = 1.3.6.1.MIB Object IdentifiersMIB-II Item OID Group or Table DescriptionifNumber 1.3.6.1.2.1.2.1.0 Interfaces Group Indicates the number of adapterspresent in the system. For the 700Series Computer, if one adapter ispresent in the system, then ifNum-ber =1andifIndex=1.ifIndex 1.3.6.1.2.1.2.2.1.1.ifIndex Inte rfa ces Tab le (i fTab l e) A unique value for each interface.The value ranges between 1 and thevalue of ifNumber.ifDescr 1.3.6.1.2.1.2.2.1.2.ifIndex Interfaces Table (ifTable) A textual string containing informa-tion about the interface.ifType 1.3.6.1.2.1.2.2.1.3.ifIndex In ter fac e s Table ( ifTa ble ) An integer containing informationabout the type of the interface. It isequal to 1 for Other.ipAdEntAddr 1.3.6.1.2.1.4.20.1.1.IpAddress IP address Table(ipAddrTable)The IP address to which this entry’ saddressing information pertains(same as 700 IP address), where IPAddress is the valid non-zero IP ad-dress of the 700 Series Computer.ipAdEntIfIndex 1.3.6.1.2.1.4.20.1.2.IpAddress IP address Table(ipAddrTable)The index value that uniquely iden-tifies the interface to which thisentry is applicable (same as ifIndex).ipAdEntNetMask 1.3.6.1.2.1.4.20.1.3.IpAddress IP address Table(ipAddrTable)The subnet mask associated withthe IP address of this entry (same asSubnet Mask).Configuring with SNMPThe community string allows an SNMP manager to manage the 700 SeriesComputer with a specified privilege level. The default read-only communi-ty string is “public” and “private” is the default read/write communitystring. See the specific configuration parameter to find its OID. To config-ure the 700 Series Computers using SNMP:1Configure 700 Series Computers for RF or Ethernet communications.2Determine the OID (Object Identifier) for the parameter to be chan-ged. The Intermec base OID is 1.3.6.1.4.1.1963.3Use your SNMP management station to get and set variables that aredefined in the Intermec MIBs. You can set the traps, identification, orsecurity configuration parameters for SNMP. See Appendix A, “ControlPanel Applets,” to learn more about these parameters.
127700 Series Color Mobile Computer User’s ManualPrinter Support5The 700 Series Color Mobile Computer works with the following printersfrom Intermec Technologies. Contact an Intermec Representative for in-formation about these printers.S6820A full-page, 80-column printer.S6808A 4-inch belt-mount printer.S781TA 2-inch belt-mount printer with a Bluetooth compatible module fromSocket Communications.S782TA 2-inch workboard printer.
Printer SupportChapter —5128 700 Series Color Mobile Computer User’s ManualPrinting ASCIIThe following methods for printing using Pocket PC at this time is as fol-lows:SAdd port drivers to print ASCII directly to the port.SUse LinePrinter ActiveX Control from the Software Developer’ s Kit(SDK) - see the SDK User’ s Manual for more information.SVia wireless printing - see the Wireless Printing Development Guide on the700C Software Tools CD for more information.Directly to a PortPrinting directly to the port sends RAW data to the printer. The format ofthis data depends upon your application and the printer capabilities.You must understand the printer commands available for your specificprinter. Generally, applications just send raw ASCII text to the printer.Since you are sending data to the printer from your application directly tothe port you are in complete control of the printers operations. This allowsyou to do line printing (print one line at a time) rather than the page for-mat printing offered by the GDI approach. It is also much faster since datadoes not have to be converted from one graphics format to the other (dis-play to printer). Most Intermecprinters use Epson Escape Sequences tocontrol print format operations.These commands are available in documentation you receive with yourprinters or from technical support. Win32 APIs are required to print di-rectly to the port.Directly to a Generic Serial PortTo print directly to a generic serial port printer (non-Intermec printers):SUse CreateFile() to open ports - COM1: can be opened on most de-vices.SUse WriteFile() to send data directly to the printer.SUse CloseHandle() when you are finished printing to close the port.IrDA Printer DriverIrDA printing is only available on the certain devices and is supported di-rectly by the Windows CE load via the IrSock API provided by the Micro-soft Win32 API without need for additional drivers. Intermec 6804, 6805,6806, 6808 and 6820 and other IrDA printers are supported.
Printer Support—Chapter 5129700 Series Color Mobile Computer User’s ManualNPCP Printer DriverThe NPCP printer communications driver (NPCPPORT.DLL) is aStream Device Driver built into the operating system. The driver supportsonly NPCP communications to and from the 6820 and 4820 printers overa selected serial port.All applications use WIN32 API functions to access the drivers. Basic op-erations are easily implemented by applications through the CreateFile(),WriteFile(), ReadFile(), DeviceIOControl(), and CloseHandle() Win32APIs.Operations to upgrade printer modules, perform printer diagnostics, andget printer configuration are performed largely via DeviceIOControl()functions.About NPCPNPCP (NorandPortable Communications Protocol) is a proprietary pro-tocol that provides session, network, and datalink services for Intermecmobile computers in the Intermec LAN environment used with printersand data communications.NPCP Driver Installation and RemovalUse LPT9: for the NPCP printer device and COM1 for the last parameter.COM1 is the connection available via the 700 Series Computer.Applications use the RegisterDevice() function to install the driver.DeregisterDevice() uninstalls the device driver and frees memory spacewhen the driver is not required. Use the HANDLE returned byRegisterDevice() as the parameter to DeregisterDevice().Use the RegisterDevice() function call as demonstrated below. Specify thefull path name to the driver starting at the root for the RegisterDevice()function to work properly. The last parameter to RegisterDevice() is aDWORD that represents the name of the port for the NPCP stream driverto use. Build this parameter on the stack if it is not to be paged out duringthe call. The first parameter “LPT” (Device Name) and the secondparameter “9’ (index), indicate the name of the registered device, such asLPT9. This is used in the CreateFile() function call.Install(){HANDLE hDevice;TCHAR port[6];port[0] = TCHAR(‘C’);port[1] = TCHAR(‘O’);port[2] = TCHAR(‘M’);port[3] = TCHAR(‘1’);port[4] = TCHAR(‘:’);port[5] = TCHAR(0);hDevice = RegisterDevice ( (TEXT(”LPT”), 9,TEXT(“\\STORAGE CARD\\WINDOWS\\NPCPPORT.dll”), (DWORD)port);}
Printer SupportChapter —5130 700 Series Color Mobile Computer User’s ManualOpening the NPCP DriverThe application opens the NPCP driver by using the CreateFile()function. The call can be implemented as follows. The first parameter“LPT9:” must reflect the device name and index used in theRegisterDevice() function call and will fail for any of the following reasons:hFile = CreateFile(_T(”LPT9:”), GENERIC_WRITE |GENERIC_READ, 0, NULL, OPEN_ALWAYS, FILE_ATTRIBUTE_NORMAL,NULL);SThe port associated with the device during RegisterDevice() is in use.SThe NPCP device is already open.SThe share mode is not set to zero. The device cannot be shared.SAccess permissions are not set to GENERIC_WRITE |GENERIC_READ. Both modes must be specified.Closing the NPCP DriverUsing the CloseHandle() (hFile) function closes the NPCP driver. WherehFile is the handle returned by the CreateFile() function call.STRUE = the device is successfully closed.SFALSE = an attempt to close NULL HANDLE or an already closed de-vice.Reading from the NPCP DriverReading of the NPCP printers is not supported since all responses from theprinter are the result of commands sent to the printer. DeviceIoControl()functions are provided where data is to be received from the printer.Writing to the NPCP DriverAll Print data can be sent to the printer using the WriteFile() function.The print data written to the driver must contain the proper printercommands for formatting. If the function returns FALSE, the NPCP errormay be retrieved using IOCTL_NPCP_ERROR. See the description onthe next page.
Printer Support—Chapter 5131700 Series Color Mobile Computer User’s ManualNPCP Driver I/O ControlsAn application uses the DeviceIoControl() function to specify an printeroperation to be performed. Certain I/O controls are required to bind andclose communication sessions with the printer, and must be completedbefore any other commands to the driver can execute properly.The function returns TRUE to indicate the device successfully completedits specified I/O control operation, otherwise it returns FALSE. Thefollowing I/O control codes are defined:#define IOCTL_NPCP_CANCELCTL_CODE(FILE_DEVICE_SERIAL_PORT,0x400,METHOD_BUFFERED,FILE_ANY_ACCESS)#define IOCTL_NPCP_BINDCTL_CODE(FILE_DEVICE_SERIAL_PORT,0x401,METHOD_BUFFERED,FILE_ANY_ACCESS)#define IOCTL_NPCP_CLOSECTL_CODE(FILE_DEVICE_SERIAL_PORT,0x402,METHOD_BUFFERED,FILE_ANY_ACCESS)#define IOCTL_NPCP_ERRORCTL_CODE(FILE_DEVICE_SERIAL_PORT,0x403,METHOD_BUFFERED,FILE_ANY_ACCESS)#define IOCTL_NPCP_FLUSHCTL_CODE(FILE_DEVICE_SERIAL_PORT,0x404,METHOD_BUFFERED,FILE_ANY_ACCESS)#define IOCTL_NPCP_IOCTLCTL_CODE(FILE_DEVICE_SERIAL_PORT,0x405,METHOD_BUFFERED,FILE_ANY_ACCESS)#define IOCTL_NPCP_PRTVERCTL_CODE(FILE_DEVICE_SERIAL_PORT,0x406,METHOD_BUFFERED,FILE_ANY_ACCESS)SIOCTL_NPCP_CANCELThis cancels all printing at the printer. It flushes the printer buffers andreinitializes the printer to its default state. No parameters are required.SIOCTL_NPCP_BINDThis command is required before any data is sent or received by theprinter. Once the driver is opened, the application must bind the com-munications session with the printer before any data can be sent or re-ceived by the printer. If an error occurs during the bind, the applicationmay use IOCTL_NPCP_ERROR to get the current extended errorcode. No parameters are required.SIOCTL_NPCP_CLOSEThis command closes the current session with the printer. This functionalways returns TRUE. No parameters are required.SIOCTL_NPCP_ERRORThis command returns the extended NPCP error code in PL/N format.The word returned will contain the PL/N compatible error code in thelow byte and completion flags in the high byte. If the frame that re-turned an error was not received correctly by the printer theFRAME_NOT_ACKED bit will be set in the high byte. This operationalways returns TRUE. An output buffer of at least 2 bytes is required.See “NPCP Error Codes” on page 133.SIOCTL_NPCP_FLUSHThis command allows the application to poll the printer for errors whilethe report is completing the print process at the printer. If an error oc-curs during the polling process, the operation will return FALSE and theapplication can get the extended error code by usingIOCTL_NPCP_ERROR. No parameters are required.
Printer SupportChapter —5132 700 Series Color Mobile Computer User’s ManualNPCP Printer CommunicationsAll NPCP printer communications should be based on the following flow:1Use CreateFile(); to open the printer driver.2Use IOCTL_NPCP_BIND to bind a session with the printer;IOCTL_NPCP_ERROR to check for errors on the bind to ensure suc-cess; and IOCTL_NPCP_CANCEL to cancel any outstanding printjobs.3Use IOCTL_NPCP_FLUSH to poll the printer to free up printer buff-er resources. Use IOCTL_NPCP_FLUSH to poll the printer’ s status. Ifan error is reported by the IOCTL, then use IOCTL_NPCP_ERRORto get the error and determine the correct recovery procedure.4Use WriteFile(); to write your data to the printer. Check for errors andthat all data were written. Use IOCTL_NPCP_ERROR to get the ex-tended error. If the error is critical in nature, useIOCTL_NPCP_CLOSE, followed by CloseFile(), to end the commu-nications session. Start a new session, beginning with step 1 to ensureproper printing. For noncritical errors display the error and retry theoperation.5After all data is sent to the printer, ensure that the printer continues toprint the report properly by polling the printer’ s status. UseIOCTL_NPCP_FLUSH to poll the printer’ s status. If an error is re-ported by the IOCTL, then use IOCTL_NPCP_ERROR to get the er-ror and determine the correct recovery procedure.Sample CodeSee sample code in the “\700 Color Dev Tools\Installable Drivers\PortDrivers\Npcp\NPCPPrint\” directory for more details on printing, printercommunications and error code handling.
Printer Support—Chapter 5133700 Series Color Mobile Computer User’s ManualNPCP Error CodesCall the IOCTL_NPCP_ERROR I/O control function to receive PL/Ncompatible error codes. Applications must decide how to act upon the datareturned.// Definition of NPCP communications Errors and Printer Errors#define PNRDY (BYTE)102 // link not ready error#define RXTMO (BYTE)104 // link no receive error#define TXTMO (BYTE)106 // link no transmit error#define BADADR (BYTE)111 // frame address error#define GAPERR (BYTE)112 // link gap error (timeout) in receive data#define LSRPE (BYTE)113 // frame parity error on length field#define IFTS (BYTE)120 // session layer - invalid frame this state#define NS_NE_VR (BYTE)121 // session layer sequence error#define NR_NE_VS (BYTE)122 // session layer sequence error#define MAC_CRCERR (BYTE)124 // MAC CRC error#define RLENERR (BYTE)123 // MAC too much data received#define FRMERR (BYTE)200 // Frame Reject#define FRMERR_IF (BYTE)201 // Frame Reject - Invalid Frame#define FRMERR_NR (BYTE)202 // Frame Reject - NR Mismatch#define FRMERR_NS (BYTE)203 // Frame Reject - NS Mismatch#define NDMERR (BYTE)204 // Normal Disconnect mode error#define BINDERR (BYTE)210 // bind error#define IPLDUR (BYTE)221 // invalid presentation layer response#define HEADJAM (BYTE)222 // printer head jam#define PAPEROUT (BYTE)223 // printer paper out#define LOWVOLTS (BYTE)224 // printer low voltage#define HIVOLTS (BYTE)225 // printer over voltage#define LOWBAT (BYTE)226 // printer low battery#define COVEROFF (BYTE)227 // printer cover off error#define HEADFAULT (BYTE)228 // printer head short or driver short error#define PFFAULT (BYTE)229 // paper feed motor fault.#define FRAME_NOT_ACKED 0x8000 // frame was not received by printer and need tobe resent.
Printer SupportChapter —5134 700 Series Color Mobile Computer User’s ManualO’Neil Printer DriverThe DTR printer communications driver is a Stream Device Drivernamed ONEIL.DLL.All applications use WIN32 API functions to access drivers. Basicoperations are easily implemented by applications through the CreateFile(),WriteFile(), DeviceIOControl() and CloseHandle() Win32 APIs.The driver supports communications to 6804DM, 6804T, 6805A, 6806,6808, 681T, and 781 printers over a selected serial port.DTR Driver Installation and RemovalYour application must install the device driver by using the RegisterDe-vice() function. The driver name is ONEIL.DLL. We recommend thatyou use “DTR” for the Device Name parameter, “1” for the Device Driverindex parameter, and use any of the following strings for the last parame-ter:SNULL (==0) Defaults to COM1 @ 9600S“COM1” only COM port specified defaults to 9600S“COM1:9600” sets to COM port and specified bit rateS“COM1:19200” sets to COM port and specified bit rateUse the HANDLE returned by RegisterDevice() as the parameter toDeregisterDevice(). The correct usage of the RegisterDevice() function callis demonstrated below. You may use DeregisterDevice() to uninstall thedriver.Install(){HANDLE hDevice;TCHAR port[6];port[0] = TCHAR(‘C’);port[1] = TCHAR(‘O’);port[2] = TCHAR(‘M’);port[3] = TCHAR(‘1’);port[4] = TCHAR(‘:’);port[5] = TCHAR(0);hDevice = RegisterDevice ( (TEXT(”DTR”), 1, TEXT(”\\WINDOWS\\ONEIL.DLL”),(DWORD)port);}
Printer Support—Chapter 5135700 Series Color Mobile Computer User’s ManualOpening the DTR DriverThe application opens the DTR driver by using the CreateFile() function.The call can be implemented as follows:hFile = CreateFile(_T(”DTR1:”), GENERIC_WRITE, 0, NULL,OPEN_ALWAYS, FILE_ATTRIBUTE_NORMAL, NULL);The first parameter “DTR1:” must reflect the device name and index usedin the RegisterDevice() function call.The function call will fail for any of the following reasons:SThe port associated with the device during RegisterDevice() is currentlyin use.SThe DTR device is already open.SThe share mode is not set to zero. The device cannot be shared.SAccess permissions are not set to GENERIC_WRITE.Closing the DTR DriverUsing the CloseHandle() (hFile) function closes the DTR driver. WherehFile is the handle returned by the CreateFile() function call.STRUE indicates the device is successfully closed.SFALSE indicates an attempt to close a NULL HANDLE or an alreadyclosed device.Writing to the DTR DriverYou can use the WriteFile() function to send all Print data to the printer.The print data being written must contain the proper formatting printercommands.DTR Printer CommunicationsAll DTR printer communications should be based on the following flow:1Use CreateFile(); to open the printer driver.2Use WriteFile() to write your data to the printer. Check for errors andthat all data were written.3Use CloseHandle() to close the driver.
Printer SupportChapter —5136 700 Series Color Mobile Computer User’s Manual
137700 Series Color Mobile Computer User’s ManualScanner Support6The 700 Series Color Mobile Computer is available with imaging or laserscanning technologies, including the following:SAPS linear imager:Reads 1D symbologies and PDF 417 bar codes. Linear imaging usingVista Scanning technology reads low-contrast bar codes, laminated barcodes, and bar codes displayed on CRT or TRT displays. This imaginguses harmless LEDs for illumination and does not require any warninglabels. Vista Scanning is more reliable than lasers as it is a completelysolid state with no moving parts or oscillating mirrors.S2D Imager:This decodes several stacked 1D and 2D symbologies, including PDF417 and Data Matrix without “painting.” It can also read 1D codesfrom any orientation, for example the scan beam does not need to bealigned perpendicular to the symbol in order to read it. Photography is asecondary application; the lens in the device will favor bar code reading.Photos are 640x480, 256 gray-scale.S1D laser scanner:Traditional laser scanner that decodes 1D bar codes.SPDF 417 laser scanner:Higher speed laser scanner that can read PDF 417 labels by “painting”the label.
Scanner SupportChapter —6138 700 Series Color Mobile Computer User’s ManualScanner Control and Data TransferNote: To use the methods described below, enable Data Collection func-tionality on the 700 Computer using the bootloader configuration menu.See Chapter 3, “Installing Applications” for more information.The Data Server and associated software provide several ways to manipu-late scanner control and data transfer between the scanner subsystem anduser applications:SAutomatic Data Collection COM Interfaces:These COM interfaces allow user applications to receive bar code data,and configure and control the bar code reader engine.SITCAxBarCodeReaderControl functions:These ActiveX controls allow user applications to collect bar code datafrom the scanner, to configure the scanner, and to configure audio andvisual notification when data arrives. For more information, see theSDK User’ s Manual.SITCAxReaderCommand functions:Use these ActiveX controls to modify and retrieve configuration infor-mation using the reader interface commands. For more information, seethe SDK User’ s Manual.SScanning EasySet bar code labels:You can use the EasySet bar code creation software from IntermecTechnologies Corporation to print configuration labels. Scan the labelsto change the scanner configuration and data transfer settings.Automatic Data Collection COM InterfacesData collection configuration and functionality cannot be accessed by anymeans (including control panel applets or remote management applications)until after the 700 Series Computer has completed initialization, whichoccurs during a warm- or cold-boot or after a firmware upgrade.When initialization is complete, the green LED on the 700 Series Com-puter stops flashing. Changes made to configuration settings remain after awarm boot. After a cold-boot, all configuration settings are reset to theirdefaults with the exception of scanner configurations, which remain exceptfor the Symbology Identifier transmission option or the Preamble andPostamble strings. To reset all configuration settings to the factory defaults,the S9C scanner firmware must be reloaded.
6 Scanner Support—Chapter139700 Series Color Mobile Computer User’s ManualThe Automatic Data Collection (ADC) functions are accessed throughcustom COM interfaces. These interfaces allow the application to receivebar code data and configure and control the bar code reader engine. TheCOM interfaces include the following functions:SIADC (starting on page 151)SIBarCodeReaderControl (starting on page 159)SIS9CConfig (starting on page 172)SIS9CConfig2 (starting on page 204)SIS9CConfig3 (starting on page 216)SIImage Interface (starting on page 221)Multiple ADC COM Object SupportA 700 Series Computer may have multiple reader engines to decode differ-ent types of ADC data. For example, a bar code reader engine decodes rawbar code data and passes it to a bar code reader COM object. An RFIDreader engine decodes raw RFID tag data and passes it to an RFID tagreader COM object.ADC COM interfaces are implemented as in-process COM objects. Aninstance of the ADC COM object creates a logical connection to access orcontrol the reader engine. Specifically, the IBarCodeReadConfig or IBar-CodeReaderControl COM objects can manage the bar code scanner con-figuration while the ADC COM object can gather data simultaneously.These ADC COM objects or connections can be created in a single ap-plication or multiple applications. Up to seven instances of a COM objectcan be created for a reader engine. For more information, see “How toCreate and Use the ADC COM Interfaces”below.For data collection features, ADC COM objects also provide for readahead and non-read ahead data access and grid data editing.
Scanner SupportChapter —6140 700 Series Color Mobile Computer User’s ManualHow to Create and Use the ADC COM InterfacesYou can also use the Input Device Functions (starting on page 149) tocreate and use the ADC COM interfaces.1Create and initialize the in-process Bar Code Reader object usingITCDeviceOpen() (see page 149). This function returns a COMInterface pointer to the Bar Code Reader Object created by thefunction.2Set the data grid if data filtering is desired (default grid gives the applica-tion all the data). Below is a sample code of how to set the grid to acceptCode 39 data that starts with the letter “A” and is not a reader com-mand.ITC_BARCODEREADER_GRID stBCGrid;stBCGrid.stDIGrid.szDataMask = TEXT(”A%s”);stBCGrid.stDDGrid.dwSymbologyMask = BARCODE_SYMBOLOGY_CODE39;stBCGrid.dwDataSourceTypeMask = ITC_DATASOURCE_USERINPUT;HRESULT hrStatus = pIBCControl->SetAttribute(ITC_RDRATTR_GRID,reinterpret_cast<BYTE *>(&stBCGrid),sizeof(stBCGrid));3Issue a read to accept the bar code data. The timestamp, symbology, anddata type are put into the ITC_BARCODE_DATA_DETAILS struc-ture. Passing in a pointer to this structure is optional. The followingsample code uses an infinite timeout.ITC_BARCODE_DATA_DETAILS stBCDetails;BYTE rgbBCData[1024]; // Buffer used to accept the bar code dataDWORD dwBytesReceived; // Number of bytes in the return data.HRESULT hrStatus = pIBCControl->Read(rgbBCData,sizeof(rgbBCData),&dwBytesReceived,& stBCDetails,INFINITE);4Compile and link the application.Read-Ahead Bar Code Data AccessThe Bar Code Reader COM object delivers ADC data to the connectionin read-ahead mode. In this mode, the data is queued until a COM con-nection is ready to read it. Read-ahead mode decouples reader device per-formance from the application performance. That is, data is read as fast asthe user can scan it, independent of the connection processing load. Nodata will be scanned until the first Read() function is posted.
6 Scanner Support—Chapter141700 Series Color Mobile Computer User’s ManualGrid Data FilteringThe virtual wedge retrieves scanned Automatic Data Collection (ADC)data and sends it to the keypad driver so that the 700 Series Computer canreceive and interpret the data as keypad input. The data can be filtered sothat only data conforming to a certain text pattern or symbology will besent to an application. After the data is filtered, it can be edited by adding,deleting, or rearranging portions of the text or by extracting portions oftext for further editing. To filter and edit data, you need to define thevirtual wedge grid parameters.SGrid Processing:Grid processing takes place in two steps:SCompilation:In which the user’ s grid expressions are checked for errors andreduced to a binary form for faster matching. This is done wheneverthe virtual wedge grid is set or changed by configuration software.SMatching:In which data is tested against the grids set in compilation. Matchingcan be performed multiple times after a compilation. The AIMsymbology ID of the data being tested, including the enclosing anglebrackets, must be prepended to the incoming data.SyntaxThe basic syntax of each grid expression is:<symID> filter-expression= > editing-expressionwhere:SsymIDIs the AIM symbology ID (see the AIM Symbology ID Defaults tablestarting on page 219).SfilterexpressionIs any character string that includes valid filter expression values (seethe “Filter Expression Values” table on the next page).Sediting-expressionIs any character string that includes valid editing expression values (seethe “Editing Expression Values” table on page 144).
Scanner SupportChapter —6142 700 Series Color Mobile Computer User’s ManualFilter Expression ValuesA filter-expression can be any string of text containing the operators listedbelow.Filter Expression ValuesOperator Meaning ExampleAny character string not containingthespecialcharacters:.?[]{}or\(period, question mark, left/rightbrackets, left/right curly brackets, back-slash).Match the string literally. super20 matches super20\c where c is any of the special char-acters:.?[]{}or\(period, question mark, left/rightbrackets, left/right curly brackets, back-slash)Remove any special meaning of c. \* matches *.(period) Any character. . matches x^ (tarot) Anchor the match at the beginningof the string.^abc matches abc, but not aabc$ (dollar sign) Anchor the match at the end of thestring.abc$ matches abc but not abcc? (question mark) Repeat the preceding expression zeroor one time.aa? matches a or aa*(asterisk) Repeat the preceding expression zeroor more times.ab*c matches ac, abc, abbc, etc.+(plussymbol) Repeat the preceding expression oneor more times.ab+c matches abc, abbc, etc.[characterclass] A series of nonrepeating charactersdenoting a class.[abcdefhijklmnopqrstuvwxyz] is theclass of all lowercase alphas.[rangel`rangeh] A sequential range of nonrepeatingcharacters denoting a class.[a-z]istheclassofalllowercaseal-phas.[^characterclass] Any character except those denotedby a character class.[^a-z] matches a numeric digit or apunctuation mark.[characterclass_tag] [:alnum:] - Alphanumeric characters[:alpha:] - Alphabetic characters[:blank:] - Tab and space[:cntrl:] - Control characters[:digit:] - Numeric characters[:graph:] - All printable characters ex-cept space[:lower:] - Lowercase letters[:print:] - All printable characters[:punct:] - Punctuation[:space:] - White space characters[:upper:] - Uppercase letters[:xdigit:] - Hexadecimal digits[[:alpha:]]* matches Dynaction,Selmer, or NewWonder but not Su-per20{num} Matches exactly num repetitions. a{3} matches only aaa{min,} Matches at least num repetitions. a{3,} matches aaaa but not aa
6 Scanner Support—Chapter143700 Series Color Mobile Computer User’s ManualFilter Expression Values (continued)ExampleMeaningOperator{min,max} A repetition operator like + or *, ex-cept the number of repetitions is spe-cified by min and max.[a-z]{1,3} matches a, ab, or aab, butnot aabc(expr1)|(expr2) Matches expr1 or expr2.a|b matches a or b(subexpression) Grouping operator to consolidateterms into a subexpression, whichcan override the order of evaluation.The subexpression is available for lat-er matching or editing by means of\index,where\index is between 1-9and refers to the index-th group inthe string, counting from left toright. \0 refers to the whole expres-sion.Overriding evaluation order: (ab)*cmatches c, abc, ababc, etc.Back-referencing: (aa)bb\1 matchesaabbaa.
Scanner SupportChapter —6144 700 Series Color Mobile Computer User’s ManualEditing Expression ValuesThis table lists the valid operators for editing expressions.Operator Meaning Example\index The index-th subexpression (reading left-right)in the matched string. index must be between0`9. \0 is the matched expression itself.M([0-9]{6})= > \1 produces 270494 whenM270494 is scanned, stripping off the firstcharacter.&or\0 The matched expression itself. M[0-9]{6}= > \0-Conn andM[0-9]{6}= > &-Connboth produceM270494-Connwhen M270494 is scanned.\xhh A concise representation of the lower 256characters in the Unicode set. When con-verted, this is still a 16-bit value.\x0d inserts a carriage return.any character string Inserts any character string in the outputstring.See previous examples.S<symID> is optional. If present, only data in the indicated symbology isaccepted.SIf the entire expression is blank, all data is passed unchanged. If =>editing-expression is omitted, then all data that passes through the filter isreturned unchanged. If = > editing expression is present, the data is trans-formed by editing-expression.SMultiple grid expressions can be compiled and are related in a logicalOR fashion. These are expressed as single grid expressions separated bysemicolons. When matching is attempted, the first grid expression fromleft to right that achieves a match will cause the data to be accepted.SAll pattern expressions and parsed data are in Unicode.Grid Filter Example 1This accepts a serial number in which the encoded number is a six-charac-ter string beginning with M followed by six numeric characters.SFilterM[0-9]{6}SEffectWhen a bar code, such as M270494, is scanned, all data is passed.Grid Filter Example 2This formats a scanned Social Security number and forms it into an XMLelement tagged “SSN”.SFilter([0-9]{3})([0-9]{2})([0-9]{4})= > <SSN > \1-\2-\3</SSN >SEffectA bar code, such as 123456789, is passed and reformatted to<SSN > 123-45-6789</SSN >
6 Scanner Support—Chapter145700 Series Color Mobile Computer User’s ManualGrid Filter Example 3This deletes the first three and last five characters of a 21-character Code128 label and deletes the first two characters of a 10-character Interleaved2 of 5 label.SFilter<]C > ...(.{13}).....= > \1; <]I > ..(........)= > \1SEffectIf Code 128, AAA1234567890123BBBBB becomes 1234567890123If Interleaved 2 of 5, AA12345678 becomes 12345678Grid Filter Example 4This inverts data such that the first alphabetic string (like a first name) andsecond alphabetic string (like a last name) are reversed and separated by acomma and a space.SFilter([[:alpha:]])+ ([[:alpha:]])+= > \2, \1SEffectWhen a bar code with the data “Dexter Gordon” is scanned, the data ismodified to read “Gordon, Dexter”.ADC ConnectionA 700 Series Computer can have both Bar Code and RFID reader engineswith each engine supporting multiple connections. Each connection allowsan application to access data or manage a configuration. An applicationcould have multiple connections.// Get an instance of the ADC COM object that corresponds integrated scannerIBarCodeReaderControl *pIBCControl;// Pointer to the Bar Code Reader objectHRESULT hrStatus = ITCDeviceOpen( TEXT(”default”),IID_IBarCodeReaderControl, ITC_DHDEVFLAG_READAHEAD,(LPVOID *) &pIBCControl);// If the ADC object was successfully created and initialized, accept barcode data.ITC_BARCODE_DATA_DETAILS stBCDetails;stBCDetails.wStructSize = sizeof(stBCDetails);BYTE rgbBCData[1024];//Buffer used to accept the bar code dataDWORD dwBytesReceived;// Number of bytes in the return data.HRESULT hrStatus = pIBCControl->Read(rgbBCData,sizeof(rgbBCData),&dwBytesReceived,& stBCDetails,INFINITE);
Scanner SupportChapter —6146 700 Series Color Mobile Computer User’s Manual2D Imager OverviewThe 700 Color optional integrated 2D Imager captures 640x480256-grayscale images at 20 frames per second. The imager features can becategorized into data collection features and image acquisition features asfollows:Data Collection FeaturesThe imager includes a decode engine capable of decoding 2D matrixsymbologies such as Data Matrix as well as the traditional 1D and stackedsymbologies (see the table on the next page for supported symbologies). Theapplication programming interfaces used to collect bar code data and con-figure the imager are the same as those used for the laser scanner. This in-cludes the keyboard wedge as well as the ADC COM interfaces and in-cludes functionality such as data editing and data filtering. In addition, theimager has the following configuration features (see “IS9CConfig3 Func-tions” starting on page 216 for configuration details):SAimer LED:A small, rectangular-aiming LED is displayed periodically during theimage capture and decoding process. The initial duration (after scan but-tons are pressed) of the aimer LED can be configured. This helps to selectthe specific bar code to be scanned with multiple bar codes in theimage.SScaled Illumination LED:When the ambient light is not sufficient to decode the bar code, the redillumination LEDs will be turned on to brighten the image. The inten-sity of the illumination LEDs is scaled to brighten the image justenough for decode. The reduces power consumption and the effect ofspecular reflection.SWindow size and position:The default window size (640x480) can be reduced in size and posi-tioned. This is useful in applications where multiple bar codes may bepresent in the image and the specific bar code must be selected to beread. For example, the window can be sized and positioned around theaimer LED. The entire bar code must reside in the configured windowfor a good decode.Omni-directional scanning is a feature that does not require configuration.1D and stacked symbologies as well as 2D matrix symbologies can bescanned with the 700 Series Computer in any orientation. Thus, time isnot needed to orient the 700 horizontal as with laser scanners.
6 Scanner Support—Chapter147700 Series Color Mobile Computer User’s ManualThe following table shows which bar code symbologies are supported ei-ther by an imager or by a laser scanner.Bar Code Symbology Imager Laser ScannerCode 39 XXInterleaved 2 of 5 X XStandard 2 of 5 XXMatrix 2 of 5 XCode 128 XXCode 93 X XCodabar XXMSI XPlessey XUPC X XEAN/EAN 128 XXCode 11 XPDF 417 XXMicro PDF 417 XTelepe n XData Matrix XQR Code XImage Acquisition FeaturesThe integrated imager provides the following image acquisition features:SReal-time and Still Image Acquisition:This includes functions that start and stop image acquisition and readacquired images.SSignature Capture:This allows the application to retrieve an image of the normalized signa-ture. This means the image is always oriented as if the picture were tak-en at right angles to the signature, at the same distance, and in the cen-ter of the image no matter in what orientation the picture was taken.Signature capture requires a PDF 417 or Code 128 bar code symbologyto be present in the image and requires the application to identify theX,Y offsets relative to the center the bar code, the X,Y dimension ofimage to be captured, and the aspect ratio of the bar code. Note theunits are in terms of the narrow element width of the bar code.
Scanner SupportChapter —6148 700 Series Color Mobile Computer User’s ManualSee the following example signature capture label and dimensions. Theseimage acquisition features are provided through the IImage Interfacedefined on page 221.Y-axis–Y–XIntelligent bar codeunitsBar code height
6 Scanner Support—Chapter149700 Series Color Mobile Computer User’s ManualCreate and Delete ADC COM Object FunctionsUse these functions to create and release ADC COM interfaces.ITCDEVMGMT.H is the header file and ITCDEVMGMT.LIB is thelibrary.ITCDeviceOpenThis function opens and initializes a communication channel to the de-vice. In C++, this function returns a pointer to an interface on which themethods are called. In C, this function returns a handle, which is the firstparameter in each of the interface function calls.SyntaxHRESULT ITCDeviceOpen( LPCTSTR pszDeviceName, REFIID iid,ITC_DEVICE_FLAGS eDeviceFlags, void** ppvObject );ParameterspszDevice [in] Pointer to a string that contains the device nameon which to initialize the logical connection.The device name (Merlin 1) identifies acommunications port.Use “default” for all internal scanners, such asImager, SE900, etc. Use “ExtScanner” fortethered scanners.iid [in] The identifier of the interface being requested.eDeviceFlags [in] Enumeration that identifies the readcharacteristics as follows:SITC_DHDEVFLAG_READAHEADData is buffered on behalf of the callingapplications. Data Buffering starts after thefirst call to IADC::Read ().SITC_DHDEVFLAG_NODATAThe client application is managing the deviceto set its configuration or control its interfacebut not to collect data from the device.ppvObject [out] A pointer to the interface pointer identified byiid. If the object does not support this interface,ppvObject is set to NULL.Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoSITCDeviceClose
Scanner SupportChapter —6150 700 Series Color Mobile Computer User’s ManualITCDeviceCloseThis function closes the interface opened with ITCDeviceOpen.Syntax:HRESULT ITCDeviceClose( IUnknown** ppvObject );ParametersppvObject [in,out] A pointer to the interface pointer created byITCDeviceOpen. If successful on output, thispointer is set to NULL.Return ValuesNone.RemarksOn Windows, this interface decrements the reference count. So alterna-tively, IUnknown::Release() could be used and must be used if referencecounting is performed with IUnknown::AddRef(). On DOS, this functioncloses all resources associated with the channel.See AlsoNone.
6 Scanner Support—Chapter151700 Series Color Mobile Computer User’s ManualIADC FunctionsIADC functions provide ADC data in an input device independent man-ner. This interface can receive bar code data, RFID data, and other ADCdata from data collection engines, such as a bar code scanner. Use IADCfunctions if bar code specifics such as symbology are not important to theapplication.IADC functions are the following. IADC.H is the header file andITCUUID.LIB contains the IID_IADC Interface GUID value used toobtain the interface.SIADC::CancelReadRequest (page 152)SIADC::Initialize (page 153)SIADC::QueryAttribute (page 154)SIADC::QueryData (page 155)SIADC::Read (page 156)SIADC::SetAttribute (page 157)
Scanner SupportChapter —6152 700 Series Color Mobile Computer User’s ManualIADC::CancelReadRequestThis function cancels a pending Read() request. This call can be made on aseparate thread as a Read() or on the same thread. On a separate thread,the function is useful in unblocking a blocked Read() so that other opera-tions can be performed. On the same thread, this function is useful instopping data from being collected on behalf of a Read Ahead Client.SyntaxHRESULT IADC::CancelReadRequest( BOOL FlushBufferedData,WORD*pwTotalDiscardedMessages, DWORD *pdwTotalDiscardedBytes );ParametersFlushBufferedData [in] True Flush and discard all alreadybuffered data.False Do not discard data, data will bereturned on the next read call.pwTotalDiscardedMessages [in/out] Total number of discarded bufferedlabels or tags.pdwTotalDiscardedBytes Total number of discarded bytes.Return ValuesHRESULT that indicates success or failure.RemarksThe return value indicates whether a read was pending.See AlsoSIADC::InitializeSIADC::QueryAttributeSIADC::QueryDataSIADC::ReadSIADC::SetAttribute
6 Scanner Support—Chapter153700 Series Color Mobile Computer User’s ManualIADC::InitializeThis function initializes a connection by opening a communications chan-nel with a logical reader engine. The communications port is implicitlyidentified. This communication channel is required to collect data or con-figure the device.SyntaxHRESULT IADC::Initialize ( LPCTSTR pszDeviceName,ITC_DEVICE_FLAGS eDeviceFlags );ParameterspszDeviceName [in] Pointer to a string that contains the device nameon which to initialize the logical connection.The device name (Merlin 1) identifies acommunications port.Use “default” for all internal scanners, such asImager, SE900, etc. Use “ExtScanner” fortethered scanners.eDeviceFlags [in] Enumeration that identifies the readcharacteristic as follows:SITC_DHDEVFLAG_READAHEADData is buffered on behalf of the callingapplication. Data buffering starts after thefirst call to IADC::Read ().Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoSIADC::CancelReadRequestSIADC::QueryAttributeSIADC::QueryDataSIADC::ReadSIADC::SetAttribute
Scanner SupportChapter —6154 700 Series Color Mobile Computer User’s ManualIADC::QueryAttributeThis function retrieves a specified attribute that is device-independent.The specified attribute can be a grid or multiclient enable status.SyntaxHRESULT IADC::QueryAttribute (ITC_ADC_ATTRIBUTE_ID eAttribID, BYTE rgbBuffer[], DWORDdwBufferSize, DWORD *pnBufferData );ParameterseAttribID [in] Specifies the attribute. Only one attribute can bequeried at a time. See IADC::SetAttribute.rgbBuffer [out] Contains buffer for the attribute to be queried.The structure of lpBuffer depends on theattribute being queried. See IADC::SetAttributefor a description of these structures.dwBufferSize [in] The maximum number of bytes rgbBuffer canstore.pnBufferData [out] Pointer to the DWORD location to put thenumber of bytes stored in rgbBuffer.Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoSIADC::CancelReadRequestSIADC::InitializeSIADC::QueryDataSIADC::ReadSIADC::SetAttribute
6 Scanner Support—Chapter155700 Series Color Mobile Computer User’s ManualIADC::QueryDataThis function returns the status of user input data that has been buffered.SyntaxHRESULT IADC::QueryData ( DWORD *dwTotalBufferedBytes, WORD*wNumberOfMessages, DWORD *dwNextMessageSize );ParametersdwTotalBufferedBytes [out] Total bytes buffered for connection.wNumberOfMessages [out] Total messages buffered. For example,each buffer contains a single bar code scan.dwNextMessageSize [out] Size (in bytes) of the next bufferedmessage.Return ValuesA standard status code that indicates success or failure.RemarksNone.See AlsoSIADC::CancelReadRequestSIADC::InitializeSIADC::QueryAttributeSIADC::ReadSIADC::SetAttribute
Scanner SupportChapter —6156 700 Series Color Mobile Computer User’s ManualIADC::ReadThis function requests user input data from the reader engine. This is ablocking function that returns either when there is data or after a timeout.SyntaxHRESULT IADC::Read ( BYTE rgbDataBuffer[], DWORDdwDataBufferSize, DWORD pnBytesReturned, SYSTEMTIMEpSystemTime, DWORD dwTimeout );ParametersrgbDataBuffer [in] Pointer to the buffer that receives the datafrom the device.dwDataBufferSize [in] Maximum number of bytes that can bestored in rgbDataBuffer.pnBytesReturned [out] Pointer to the DWORD location to storethe number of bytes returned inrgbDataBuffer.pSystemTime [out] Pointer to a SYSTEMTIME structure thatwill hold the time stamp of the receiveddata. This can be NULL if a timestamp isnot needed.dwTimeout [in] Number of milliseconds caller waits fordata. This parameter is ignored if theRead Ahead flag is not set.S0If data is not available, returns quickly.SINFINITEWaits until data is available.Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoSIADC::CancelReadRequestSIADC::InitializeSIADC::QueryAttributeSIADC::QueryDataSIADC::SetAttribute
6 Scanner Support—Chapter157700 Series Color Mobile Computer User’s ManualIADC::SetAttributeThis function changes an attribute such as a grid specification.SyntaxHRESULT IADC::SetAttribute ( ITC_ADC_ATTRIBUTE_ID eAttribID,BYTE rgbData[], DWORD nBufferSize );ParameterseAttribID [in] Identifies the attribute to set. Only one attributecan be set at a time. The attribute is:SITC_MULTICLIENT_ENABLEIndicates whether this client can coexist withother clients.rgbData [in] Contains data for the attribute to be set.Depending on the eAttribID, this will be mappedto the appropriate structure as follows:SITC_MULTICLIENT_ENABLEBOOL is the rgbData Data Structure.STRUE, Client can receive data with otherclients (default).SFALSE, Data stream to this client is turnedoff when there are other clients.SITC_DHATTR_READFILTERITC_READFILTER is the rgbData DataStructure. The ITC_READFILE structure isdefined in IADCDEVICE.H as follows:typedef struct{#define ITC_MAXFILTER_CHARS 240WORD nFilterChars;TCHAR szFilter[ITC_MAXFILTER_CHARS];} ITC_READFILTER;where:SITC_MAXFILTER_CHARSMaximum number of characters in a filterspecification. Includes NULL termination.SnFilterChars Number of characters inpszDataMask.SszFilter Data mask specification. See“Grid Data Filtering.”nBufferSize [in] Number of bytes in rgbData.ITC_DHATTR_READFILTERRegular expression that performs data filtering and data editing. See “GridData Filtering” on page 141 for more information.Return ValuesA standard status code that indicates success or failure.RemarksNone.
Scanner SupportChapter —6158 700 Series Color Mobile Computer User’s ManualSee AlsoSIADC::CancelReadRequestSIADC::InitializeSIADC::QueryAttributeSIADC::QueryDataSIADC::Read
6 Scanner Support—Chapter159700 Series Color Mobile Computer User’s ManualIBarCodeReaderControl FunctionsIBarCodeReaderControl functions provide functionality for bar codecollection and control only. These functions allow an application to:STrigger the bar code laser scannerSDisable the scannerSReceive a bar code with details such as symbology scanned, data type(Unicode, ASCII), and the time the data was received.These functions include the following. IBARCODEREADER.H is theheader file and ITCUUID.LIB contains the IID_IADC Interface GUIDvalue used to obtain the interface.SIBarCodeReaderControl::CancelReadRequest (page 160)SIBarCodeReaderControl::ControlLED (page 161)SIBarCodeReaderControl::Initialize (page 162)SIBarCodeReaderControl::IssueBeep (page 163)SIBarCodeReaderControl::QueryAttribute (page 164)SIBarCodeReaderControl::Read (page 165)SIBarCodeReaderControl::SetAttribute (page 167)SIBarCodeReaderControl::TriggerScanner (page 171)
Scanner SupportChapter —6160 700 Series Color Mobile Computer User’s ManualIBarCodeReaderControl::CancelReadRequestThis function cancels a pending IBarCodeReaderControl::Read request. Ifthe read request is blocked, issue the CancelReadRequest from a separatethread.SyntaxHRESULT IBarCodeReaderControl::CancelReadRequest( BOOLFlushBufferedData, WORD *pwTotalDiscardedMessages,WORD*pwTotalDiscardedBytes );ParametersFlushBufferedData [in] TRUE Flushes and discards all buffereddata.FALSE Does not discard data; data willbe returned on the next readcall.pwTotalDiscardedMessages [in/out] Total number of discardedbuffered labels or tags.pwTotalDiscardedBytes Total number of discardedbytes.Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoSIBarCodeReaderControl::ControlLEDSIBarCodeReaderControl::InitializeSIBarCodeReaderControl::IssueBeepSIBarCodeReaderControl::QueryAttributeSIBarCodeReaderControl::ReadSIBarCodeReaderControl::SetAttributeSIBarCodeReaderControl::TriggerScanner
6 Scanner Support—Chapter161700 Series Color Mobile Computer User’s ManualIBarCodeReaderControl::ControlLEDThis function controls LED illumination on a tethered scanner. The goodread LED and any valid LEDs will be turned on and off based on definedparameters.SyntaxHRESULT IBarCodeReaderControl::ControlLED(ITC_BARCODE_LASER_LED_ID eLED, BOOL fLedOn );ParameterseLED [in] The specified LED identifier.SITC_BARCODE_LASER_GOOD_READ_LEDIdentifies the good read LED.fLedOn [in] TRUE turns on the LED. FALSE turns off the LED.Return ValuesHRESULT that indicates success or failure.RemarksThis function does not coordinate LED control with the scanner. If thescanner LED control is enabled, function results will be unpredictable.See AlsoSIBarCodeReaderControl::CancelReadRequestSIBarCodeReaderControl::InitializeSIBarCodeReaderControl::IssueBeepSIBarCodeReaderControl::QueryAttributeSIBarCodeReaderControl::ReadSIBarCodeReaderControl::SetAttributeSIBarCodeReaderControl::TriggerScanner
Scanner SupportChapter —6162 700 Series Color Mobile Computer User’s ManualIBarCodeReaderControl::InitializeThis function opens and initializes a communications channel with a log-ical bar code reader engine.SyntaxHRESULT IBarCodeReaderControl::Initialize ( LPCTSTRpszDeviceName, ITC_DEVICE_FLAGS eDeviceFlags );ParameterspszDeviceName [in] Pointer to a string with device on which toinitialize the logical connection. The deviceidentifies a communications port. Use “default”for all internal scanners, such as Imager, SE900,etc. Use “ExtScanner” for tethered scanners.eDeviceFlags [in] Enumeration that identifies the readcharacteristic as follows:SITC_DHDEVFLAG_READAHEADData is buffered on behalf of the callingapplications. Data Buffering starts after thefirst call to IADC::Read ().Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoSIBarCodeReaderControl::CancelReadRequestSIBarCodeReaderControl::ControlLEDSIBarCodeReaderControl::IssueBeepSIBarCodeReaderControl::QueryAttributeSIBarCodeReaderControl::ReadSIBarCodeReaderControl::SetAttributeSIBarCodeReaderControl::TriggerScanner
6 Scanner Support—Chapter163700 Series Color Mobile Computer User’s ManualIBarCodeReaderControl::IssueBeepThis function causes the reader engine to generate a high beep, a low beep,or a custom beep. The high beep and low beep are preconfigured beeptones and durations. The custom beep allows the client to specify the fre-quency and duration. The volume is the current volume setting. Note thisis not implemented.SyntaxHRESULT IBarCodeReaderControl::IssueBeep( ITC_BEEP_SPECrgBeepRequests[], DWORD dwNumberOfBeeps );ParametersrgBeepRequests [in] Array of ITC_BEEP_SPEC structures thatidentifies the beep type. The beep structureis:typedef struct tagITCBeepSpec{ITC_BEEP_TYPE eBeepType; // Identifies the type of beep// Following fields used only if the beep type is ITC_CUSTOM_BEEP.WORD wPitch; // Frequency, in Hz, of the beep.WORD wOnDuration; // Duration, in milliseconds, of Beep On.WORD wOffDuration; // Duration, in milliseconds, of Beep Off// Beep Off is used to separate individual beeps} ITC_BEEP_SPEC;typedef enum tagITCBeepType{ITC_LOW_BEEP, // Issue the default low beep.ITC_HIGH_BEEP, // Issue the default high beep.ITC_CUSTOM_BEEP, // Issue a custom beep.} ITC_BEEP_TYPE;dwNumberOfBeeps [in] Identifies the total number of beeps inrgBeepRequests.Return ValuesE_NOTIMPL as this function is not implemented.RemarksNone.See AlsoSIBarCodeReaderControl::CancelReadRequestSIBarCodeReaderControl::ControlLEDSIBarCodeReaderControl::InitializeSIBarCodeReaderControl::QueryAttributeSIBarCodeReaderControl::ReadSIBarCodeReaderControl::SetAttributeSIBarCodeReaderControl::TriggerScanner
Scanner SupportChapter —6164 700 Series Color Mobile Computer User’s ManualIBarCodeReaderControl::QueryAttributeThis function retrieves the device-specific grid, the scanner enable status,and the LED control status for the current bar code reader engine.SyntaxHRESULT IBarCodeReaderControl::QueryAttribute (ITC_BARCODEREADER_ATTRIBUTE_ID eAttr, BYTE rgbAttrBuffer[],DWORD dwAttrBufferSize );ParameterseAttr [in] Specifies the attribute. SeeIBarCodeReaderControl::SetAttribute onpage 167 for the attributes.rgbAttrBuffer [out] Contains buffer for the attribute to bequeried. The structure of rgbAttrBufferdepends on the attribute being queried.See IBarCodeReaderControl::SetAttritbutefor a description of these structures.dwAttrBufferSize [in] The maximum number of bytes thatrgbAttrBuffer can store.Return ValuesA standard status code that indicates success or failure.RemarksThe following attributes are not supported on the imager:SITC_RDRATTR_TONE_ENABLESITC_RDRATTR_VOLUME_LEVELSITC_RDRATTR_TONE_FREQUENCYSITC_RDRATTR_GOOD_READ_BEEPS_NUMBERSITC_RDRATTR_GOOD_READ_BEEP_DURATIONSee AlsoSIBarCodeReaderControl::CancelReadRequestSIBarCodeReaderControl::ControlLEDSIBarCodeReaderControl::InitializeSIBarCodeReaderControl::IssueBeepSIBarCodeReaderControl::ReadSIBarCodeReaderControl::SetAttributeSIBarCodeReaderControl::TriggerScanner
6 Scanner Support—Chapter165700 Series Color Mobile Computer User’s ManualIBarCodeReaderControl::ReadThis function reads data from the bar code input device. This method per-forms the same function as IADC::Read () except that it provides addition-al information about data received such as bar code symbology used, datatype, and time stamp of received data.SyntaxHRESULT IBarCodeReaderControl::Read ( BYTErgbDataBuffer[],DWORD dwDataBufferSize, DWORDpnBytesReturned,ITC_BARCODE_DATA_DETAILSpBarCodeDataDetails, DWORD dwTimeout );ParametersrgbDataBuffer [in] Pointer to the buffer that receives datafrom the device.dwDataBufferSize [in] Maximum number of bytes that can bestored in rgbDataBuffer.pnBytesReturned [out] Pointer to the DWORD location that willstore the bytes returned in rgbDataBuffer.pBarCodeDataDetails [in] Address of data structure in which to putthe data details. This may be NULL. TheITC_BARCODE_DATA_DETAILS is:typedef struct tagITCBarCodeDetails{WORD wStructSize,ITC_BARCODE_SYMBOLOGY_ID eSymbology,ITC_BARCODE_DATATYPE eDataType,SYSTEMTIME stTimeStamp,}ITC_BARCODE_DATA_DETAILS;typedef enum tagBarCodeDataType{BARCODE_DATA_TYPE_UNKNOWN = 1,BARCODE_DATA_TYPE_ASCII,BARCODE_DATA_TYPE_UNICODE,}ITC_BARCODE_DATATYPE;where:SwStructSize Size of structure. Used for versioning structure.SeSymbology Symbology of the returned data.SeDataType Identifies data types as ASCII, UNICODE, etc.SstTimeStamp Timestamp of the received data.SBARCODE_DATA_TYPE_UNKNOWN Data in unknown.SBARCODE_DATA_TYPE_ASCII Data is ASCII.SBARCODE_DATA_TYPE_UNICODE Data is UNICODE.
Scanner SupportChapter —6166 700 Series Color Mobile Computer User’s ManualdwTimeout [in] Number of milliseconds caller waits fordata. If you set a timeout, the call will beblocked until data is received.S0If data not available, returns quickly.SINFINITEWaits until data is available.Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoSIBarCodeReaderControl::CancelReadRequestSIBarCodeReaderControl::ControlLEDSIBarCodeReaderControl::InitializeSIBarCodeReaderControl::IssueBeepSIBarCodeReaderControl::QueryAttributeSIBarCodeReaderControl::SetAttributeSIBarCodeReaderControl::TriggerScanner
6 Scanner Support—Chapter167700 Series Color Mobile Computer User’s ManualIBarCodeReaderControl::SetAttributeThis function enables and disables the laser scanner, sets the bar code read-er engine specific grid, and enables or disables the reader engine LED con-trol.SyntaxHRESULT IBarCodeReaderControl::SetAttribute (ITC_BARCODEREADER_ATTRIBUTE_ID eAttr, BYTE rgbAttrBuffer[],DWORD dwAttrBufferSize );ParameterseAttr [in] Identifies the attribute to set. Only one attribute can be setat a time. The attributes are:SITC_RDRATTR_SCANNER_ENABLEEnable or disable scanner for all connections.SITC_RDRATTR_GOOD_READ_LED_ENABLEEnables and disables the reader engine from controllingthe good read LED.SITC_RDRATTR_TONE_ENABLEEnables and disables the reader engine from issuingbeeps.SITC_RDRATTR_VOLUME_LEVELSets beep volume level.SITC_RDRATTR_TONE_FREQUENCYSets beep frequency.SITC_RDRATTR_GOOD_READ_BEEPS_NUMBERSets number of beeps for a good read.SITC_RDRATTR_GOOD_READ_BEEP_DURATIONSets duration of beeps for a good read.SITC_DHATTR_READFILTERThe ITC_READFILTER is the rgbData Data Structure.The ITC_READFILE structure is defined inIADCDEVICE.H as follows:typedef struct{#define ITC_MAXFILTER_CHARS 240WORD nFilterChars;TCHAR szFilter[ITC_MAXFILTER_CHARS];} ITC_READFILTER;where:SnFilterChars Number of characters in pszDataMask.SszFilter Data mask specification. See “Grid DataFiltering.”SITC_MAXFILTER_CHARSMaximum number of characters in a filter specification.Includes NULL termination.
Scanner SupportChapter —6168 700 Series Color Mobile Computer User’s ManualrgbAttrBuffer [in] Contains data for the attribute to be set. Dependingon eAttr,thergbAttrData will be mapped to theappropriate structure as shown in the following table .rgbAttrBuffer Data StructureseAttr Data Structure contained in rgbAttrBufferITC_RDRATTR_GRID ITC_BARCODEREADER_READER_GRIDReader Engine specific grid only.ITC_RDRATTR_SCANNER_ENABLE BOOLTRUE Enable scanner.FALSE Disable scanner.ITC_RDRATTR_GOOD_READ_LED_ENABLE BOOLTRUE Reader Engine controls good read LED.FALSE Good read LED is not controlled.ITC_RDRATTR_DATA_VALID_LED_ENABLE BOOLTRUE Reader Engine controls data valid LED.FALSE Data valid LED is not controlled.ITC_RDRATTR_TONE_ENABLE BOOLTRUE Reader Engine issues beeps.FALSE Beeps are not issued.ITC_RDRATTR_VOLUME_LEVEL ITC_BEEP_VOLUMEAn enumerator that identifies the beep volume level con-trol. Valid range for S9C:typedef enum tagBeepVolume{ITC_BEEP_VOLUME_LOW = 0,ITC_BEEP_VOLUME_MEDIUM = 2,ITC_BEEP_VOLUME_HIGH = 1 //Default}ITC_BEEP_VOLUMENote: Due to the hardware design on this 700 Series Com-puter, the volume level can be eitherOFF (ITC_BEEP_VOLUME_LOW) orON (ITC_BEEP_VOLUME_MEDIUM/HIGH).ITC_RDRATTR_TONE_FREQUENCY DWORDA value that identifies the tone frequency in Hz. Validrange for S9C: 1000`4095 Hz (default: 2090).Note: Value is divided by 10 for storage. On retrieval, thescanner rounds off the value to the nearest 10 Hz, then mul-tiplies the value by 10. For example, the value sent to thescanner is 2095. On retrieval, the value returned is 2090.
6 Scanner Support—Chapter169700 Series Color Mobile Computer User’s ManualrgbAttrBuffer Data Structures (continued)Data Structure contained in rgbAttrBuffereAttrITC_RDRATTR_GOOD_READ_BEEPS_NUMBER ITC_GOOD_READ_BEEPS_NUMBERAn enumerator identifying the good read beeps number.Valid range for S9C:typedef enum tagGoodReadBeepsNumber{ITC_NUM_BEEPS_NONE = 0,ITC_NUM_BEEPS_ONE = 1, // DefaultITC_NUM_BEEPS_TWO = 2}ITC_GOOD_READ_BEEPS_NUMBERITC_RDRATTR_GOOD_READ_BEEP_DURATION DWORDValue identifying the good read beep duration in ms.Valid range for S9C: 0`2550 ms (Default: 80).Note: Value is divided by 10 for storage. On retrieval, thescanner rounds the value to the nearest 10 ms, then multi-plies the value by 10.dwAttrBufferSize [in] The size of rgbAttrBuffer in bytes.Return ValuesHRESULT that indicates success or failure.RemarksRead ahead and non-read ahead clients can change the grid. Sincechanging the grid changes the entire reader engine grid, useIBarCodeReaderControl::QueryAttribute to retrieve the current readerengine grid and grid changes before sending back using SetAttribute. Thegrid structure is typedef struct tagBarCodeReaderGrid.{ITC_DI_GRID stDIGrid; // Device independent grid.ITC_DDBARCODE_GRID stDDGrid; // Reader engine dependent gridDWORD dwDataSourceTypeMask;} ITC_BARCODEREADER_GRID;ITC_DI_GRIDtypedef struct tagItcBarCodeGrid{DWORD dwSymbologyMask; // Symbologies to be received.} ITC_DDBARCODE_GRID;When the scanner is enabled, it scans when the scan button is pressed orthe trigger is pulled. When the scanner is disabled, it does not respondwhen the scan button is pressed or the trigger is pulled.
Scanner SupportChapter —6170 700 Series Color Mobile Computer User’s ManualThe following attributes are not supported on the imager:SITC_RDRATTR_TONE_ENABLESITC_RDRATTR_VOLUME_LEVELSITC_RDRATTR_TONE_FREQUENCYSITC_RDRATTR_GOOD_READ_BEEPS_NUMBERSITC_RDRATTR_GOOD_READ_BEEP_DURATIONSee AlsoSIBarCodeReaderControl::CancelReadRequestSIBarCodeReaderControl::ControlLEDSIBarCodeReaderControl::InitializeSIBarCodeReaderControl::IssueBeepSIBarCodeReaderControl::QueryAttributeSIBarCodeReaderControl::ReadSIBarCodeReaderControl::TriggerScanner
6 Scanner Support—Chapter171700 Series Color Mobile Computer User’s ManualIBarCodeReaderControl::TriggerScannerThis function turns the scanner on and off. The client application mustcoordinate control of the scanner with the user.SyntaxHRESULT IBarCodeReaderControl::TriggerScanner ( BOOLfScannerOn );ParametersfScannerOn [in] Set TRUE to turn the scanner on. Set FALSE to turnthe scanner off.Return ValuesHRESULT that indicates success or failure.RemarksThe scanner will be turned on or off independent of the actions of the us-ers. The client application must coordinate control of the scanner with theuser. When the scanner is turned on, its behavior is controlled by the trig-ger mode. That is, in one shot mode, the laser turns off when a label isscanned; in auto-trigger mode, the laser remains on.See AlsoSIBarCodeReaderControl::CancelReadRequestSIBarCodeReaderControl::ControlLEDSIBarCodeReaderControl::InitializeSIBarCodeReaderControl::IssueBeepSIBarCodeReaderControl::QueryAttributeSIBarCodeReaderControl::ReadSIBarCodeReaderControl::SetAttribute
Scanner SupportChapter —6172 700 Series Color Mobile Computer User’s ManualIS9CConfig FunctionsThis interface provides methods to set and retrieve the 700 Series Com-puter bar code configuration. All supported symbologies are initialized totheir defaults when the S9C firmware is loaded.GET/SET functions use enumerations as their parameters. In most enu-merations, there is an enumerator xx_NO_CHANGE (such asITC_CODE39_NO_CHANGE), where xx refers to a particular enum-eration. This enumerator can be used during a call to a SET to indicatethat no change is to be made to that particular parameter. This preventsthe called function from having to format the same S9C command andsend down to the S9C scanner.For all symbologies, to set a bar code length of “any length,” use a value of“0” for the bar code length argument.IS9CConfig functions are the following. IS9CCONFIG.H is the headerfile and ITCUUID.LIB contains the IID_IADC Interface GUID valueused to obtain the interface.SIS9CConfig::GetCodabar (page 173)SIS9CConfig::SetCodabar (page 174)SIS9CConfig::GetCode39 (page 176)SIS9CConfig::SetCode39 (page 177)SIS9CConfig::GetCode93 (page 179)SIS9CConfig::SetCode93 (page 179)SIS9CConfig::GetCode128 (page 180)SIS9CConfig::SetCode128 (page 181)SIS9CConfig::GetI2of5 (page 183)SIS9CConfig::SetI2of5 (page 184)SIS9CConfig::GetMatrix2of5 (page 185)SIS9CConfig::SetMatrix2of5 (page 186)SIS9CConfig::GetMSI (page 187)SIS9CConfig::SetMSI (page 187)SIS9CConfig::GetPDF417 (page 188)SIS9CConfig::SetPDF417 (page 189)SIS9CConfig::GetPlessey (page 192)SIS9CConfig::SetPlessey (page 192)SIS9CConfig::GetStandard2of5 (page 194)SIS9CConfig::SetStandard2of5 (page 195)SIS9CConfig::GetTelepen (page 197)SIS9CConfig::SetTelepen (page 197)SIS9CConfig::GetUpcEan (page 198)SIS9CConfig::SetUpcEan (page 200)
6 Scanner Support—Chapter173700 Series Color Mobile Computer User’s ManualIS9CConfig::GetCodabarThis function retrieves the current settings of Codabar symbology.SyntaxHRESULT IS9CConfig::GetCodabar( ITC_CODABAR_DECODING*peDecode, ITC_CODABAR_START_STOP* peSS, ITC_CODABAR_CLSI*peCLSI, ITC_CODABAR_CHECK_DIGIT* peCheck,ITC_BARCODE_LENGTH_ID* peLengthId, BYTE rgbLengthBuff[],DWORD* pdwNumBytes );ParameterspeDecode [out] Pointer to the ITC_CODABAR_DECODINGlocation to receive the decoding for Codabarsymbology.peSS [out] Pointer to theITC_CODABAR_START_STOP location toreceive the Start/Stop option.peCLSI [out] Pointer to the ITC_CODABAR_CLSI locationto receive the CLSI library system.peCheck [out] Pointer to theITC_CODABAR_CHECK_DIGIT location toreceive the check digit.peLengthId [out] Pointer to the ITC_BARCODE_LENGTH_IDlocation to receive an indicator of eitherITC_BARCODE_LENGTH orITC_BARCODE_FIXED_LENGTH.rgbLengthBuff [out,size_is(3)]An array of bytes to receive 1 byte of data forITC_BARCODE_LENGTH, or 3 bytes of datafor ITC_BARCODE_FIXED_LENGTH.pdwNumBytes [out] Pointer to the DWORD location to receive anumber indicating number of bytes inrbgLengthBuff[]: 1 byte forITC_BARCODE_LENGTH or 3 bytes forITC_BARCODE_FIXED_LENGTH.Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoNone.
Scanner SupportChapter —6174 700 Series Color Mobile Computer User’s ManualIS9CConfig::SetCodabarThis function updates the Codabar settings with new values.SyntaxHRESULT IS9CConfig::SetCodabar( ITC_CODABAR_DECODINGeDecode, ITC_CODABAR_START_STOP eSS, ITC_CODABAR_CLSIeCLSI,ITC_CODABAR_CHECK_DIGIT eCheck, ITC_BARCODE_LENGTH_IDeLengthId, BYTE rgbLengthBuff[],DWORD dwNumBytes );ParameterseDecode [in] Identifies the decoding for Codabar symbology.eSS [in] Identifies the Start/Stop option.eCLSI [in] Identifies the CLSI library system.eCheck [in] Identifies the check digit.eLengthId [in] UseITC_BARCODE_LENGTH_NO_CHANGE toindicate no change for bar code length. UseITC_BARCODE_LENGTH for any length andminimum length, and set rgbLengthBuff[0] to avalid length value.Use ITC_BARCODE_FIXED_LENGTH tocompose 1 or 2 or 3 fixed lengths, and set 3 bytes:rgbLengthBuff[0],rgbLengthBuff[1],rgbLengthBuff[2] with valid values.rgbLengthBuff [in,size_is(dwNumBytes)]An array of bytes containing bar code lengths wheneLengthId = ITC_BARCODE_LENGTH orITC_BARCODE_FIXED_LENGTH.dwNumBytes [in] Number of bytes in rbgLengthBuff[]. For S9C, thisvalue is 1 wheneLengthId = ITC_BARCODE_LENGTH or 3when eLengthId =ITC_BARCODE_FIXED_LENGTHReturn ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoNone.
6 Scanner Support—Chapter175700 Series Color Mobile Computer User’s ManualCodabar Default SettingsParameter Default Valid RangeDecode Not Active ITC_CODABAR_DECODINGCLSI Library System Not Active ITC_CODABAR_CLSIStart/Stop Not Transmitted ITC_CODABAR_START_STOPCheck Digit Not Used ITC_CODABAR_CHECK_DIGITBar Code Length Minimum Length = 6 0x00`0xFE ITC_BC_LENGTH_NO_CHANGECodabar Enumerationstypedef enum tagCodabarDecoding{ITC_CODABAR_NOTACTIVE = 0, // DefaultITC_CODABAR_ACTIVE = 1,ITC_CODABAR_NO_CHANGE = 255} ITC_CODABAR_DECODING;typedef enum tagCodabarStartStop{ITC_CODABAR_SS_NOTXMIT, // DefaultITC_CODABAR_SS_LOWERABCD, // a,b,c,dITC_CODABAR_SS_UPPERABCD, // A,B,C,DITC_CODABAR_SS_LOWERABCDTN, // a,b,c,d / t,n,*,eITC_CODABAR_SS_DC1TODC4, // DC1,DC2,DC3,DC4ITC_CODABAR_SS_NO_CHANGE = 255} ITC_CODABAR_START_STOP;typedef enum tagCodabarClsi{ITC_CODABAR_CLSI_NOTACTIVE = 0, // DefaultITC_CODABAR_CLSI_ACTIVE = 1,ITC_CODABAR_CLSI_NO_CHANGE = 255} ITC_CODABAR_CLSI;typedef enum tagCodabarCheckDigit{ITC_CODABAR_CHECK_NOTUSED, // DefaultITC_CODABAR_CHECK_XMIT,ITC_CODABAR_CHECK_NOTXMIT,ITC_CODABAR_CHECK_NO_CHANGE = 255} ITC_CODABAR_CHECK_DIGIT;typedef enum tagBarcodeLengthId{ITC_BARCODE_LENGTH = 0,ITC_BARCODE_FIXED_LENGTH,ITC_BARCODE_LENGTH_NO_CHANGE = 255} ITC_BARCODE_LENGTH_ID;
Scanner SupportChapter —6176 700 Series Color Mobile Computer User’s ManualIS9CConfig::GetCode39This function retrieves the current settings of Code 39.SyntaxHRESULT IS9Cconfig::GetCode39( ITC_CODE39_DECODING*peDecode, ITC_CODE39_FORMAT* peFormat,ITC_CODE39_START_STOP* peSS,ITC_CODE39_SS_CHARS* peSSChars,ITC_CODE39_CHECK_DIGIT* peCheck, DWORD* pwLength );ParameterspeDecode [out] Pointer to the ITC_CODE39_DECODINGlocation to receive the decoding for Code 39.peFormat [out] Pointer to the ITC_CODE39_FORMAT locationto receive the Code 39 format.peSS [out] Pointer to the ITC_CODE39_START_STOPlocation to receive the Code 39 start/stop.peSSChars [out] Pointer to the ITC_CODE39_SS_CHARSlocation to receive the Start/Stop character.peCheck [out] Pointer to the ITC_CODE39_CHECK_DIGITlocation to receive the check digit.pwLength [out] Pointer to the DWORD location to receive the barcode length.Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoNone.
6 Scanner Support—Chapter177700 Series Color Mobile Computer User’s ManualIS9CConfig::SetCode39This function updates the Code 39 settings with new values.SyntaxHRESULT IS9CConfig::SetCode39( ITC_CODE39_DECODINGeDecode,ITC_CODE39_FORMAT eFormat, ITC_CODE39_START_STOPeSS,ITC_CODE39_SS_CHARS eSSChars, ITC_CODE39_CHECK_DIGITeCheck, DWORD dwLength );ParameterseDecode [in] Identifies the decoding for Code 39.eFormat [in] Identifies the Code 39 Format.eSS [in] Identifies the Start/Stop option.eSSChars [in] Identifies the Start/Stop character.eCheck [in] Identifies the Check digit.dwLength [in] Identifies the bar code length.Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoNone.Code 39 Default SettingsParameter Default Valid RangeDecoding Active ITC_CODE39_DECODINGFormat Standard 43 Character ITC_CODE39_FORMATStart/Stop Not Transmitted ITC_CODE39_START_STOPAccepted Start/stop Characters *only ITC_CODE39_SS_CHARSCheck Digit Not Used ITC_CODE39_CHECK_DIGITBar Code Length Any Bar Code Length 0x00`0xFE ITC_BC_LENGTH_NO_CHANGE
Scanner SupportChapter —6178 700 Series Color Mobile Computer User’s ManualCode 39 Enumerationstypedef enum tagCode39Decoding{ITC_CODE39_NOTACTIVE = 0,ITC_CODE39_ACTIVE = 1, // DefaultITC_CODE39_NO_CHANGE = 255} ITC_CODE39_DECODING;typedef enum tagCode39Format{ITC_CODE39_FORMAT_STANDARD43, // DefaultITC_CODE39_FORMAT_FULLASCII,ITC_CODE39_FORMAT_NO_CHANGE = 255} ITC_CODE39_FORMAT;typedef enum tagCode39StartStop{ITC_CODE39_SS_NOTXMIT, // DefaultITC_CODE39_SS_XMIT,ITC_CODE39_SS_NO_CHANGE = 255} ITC_CODE39_START_STOP;typedef enum tagCode39StartStopChars{ITC_CODE39_SS_CHARS_DOLLARSIGN,ITC_CODE39_SS_CHARS_ASTERISK, // DefaultITC_CODE39_SS_CHARS_BOTH,ITC_CODE39_SS_CHARS_NO_CHANGE = 255} ITC_CODE39_SS_CHARS;typedef enum tagCode39CheckDigit{ITC_CODE39_CHECK_NOTUSED, // DefaultITC_CODE39_CHECK_MOD43_XMIT,ITC_CODE39_CHECK_MOD43_NOTXMIT,ITC_CODE39_CHECK_FRENCH_CIP_XMIT,ITC_CODE39_CHECK_FRENCH_CIP_NOTXMIT,ITC_CODE39_CHECK_ITALIAN_CPI_XMIT,ITC_CODE39_CHECK_ITALIAN_CPI_NOTXMIT,ITC_CODE39_CHECK_NO_CHANGE = 255} ITC_CODE39_CHECK_DIGIT;
6 Scanner Support—Chapter179700 Series Color Mobile Computer User’s ManualIS9CConfig::GetCode93This function retrieves the current settings of Code 93.SyntaxHRESULT IS9CConfig::GetCode93( ITC_CODE93_DECODING*peDecode, DWORD* pdwLength );ParameterspeDecode [out] Pointer to the ITC_CODE93_DECODINGlocation to receive the decoding for Code 93symbology.pdwLength [out] Pointer to the DWORD location to receive a valuefor bar code length.Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoNone.IS9CConfig::SetCode93This function updates the Code 93 settings with new values.SyntaxHRESULT IS9CConfig::SetCode93( ITC_CODE93_DECODINGeDecode,DWORD dwLength );ParameterseDecode [in] Identifies the decoding for Code93 Symbology.dwLength [in] Identifies the bar code length.Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoNone.Code 93 Default SettingsParameter Default Valid RangeDecoding Not Active ITC_CODE93_DECODINGBar Code Length Any Bar Code Length 0x00`0xFE ITC_BC_LENGTH_NO_CHANGE
Scanner SupportChapter —6180 700 Series Color Mobile Computer User’s ManualCode 93 EnumerationsUse this when the bar code length does not require any change.typedef enum tagCode93Decoding{ITC_CODE93_NOTACTIVE = 0, // DefaultITC_CODE93_ACTIVE = 1,ITC_CODE93_NO_CHANGE = 255} ITC_CODE93_DECODING;#define ITC_BC_LENGTH_NO_CHANGE 255.IS9CConfig::GetCode128This function retrieves the current settings of Code 128 symbology.SyntaxHRESULT IS9Cconfig::GetCode128( ITC_CODE128_DECODING*peDecode, ITC_EAN128_IDENTIFIER* peEan128Ident,ITC_CODE128_CIP128 peCip128State, BYTE* pbyFNC1, DWORD*pdwLength );ParameterspeDecode [out] Pointer to the ITC_CODE128_DECODINGlocation to receive the decoding for Code 128symbology.peEan128Ident [out] Pointer to the ITC_EAN128_IDENTIFIERlocation to receive the EAN 128 identifier.peCip128State [out] Pointer to the ITC_CODE128_CIP128location to receive the CIP 128.pbyFNC1 [out] Pointer to the BYTE location to receive theFNC1 separator character.pdwLength [out] Pointer to the DWORD location to receive avalue for bar code length.Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoNone.
6 Scanner Support—Chapter181700 Series Color Mobile Computer User’s ManualIS9CConfig::SetCode128This function updates the Code 128 settings with new values.SyntaxHRESULT IS9CConfig::SetCode128( ITC_CODE128_DECODINGeDecode, ITC_EAN128_IDENTIFIER eEan128Ident,ITC_CODE128_CIP128 eCip128State, BYTE byFNC1, DWORD dwLength);ParameterseDecode [in] Identifies the decoding for Code 128 symbology.eEan128Ident [in] Identifies the EAN 128 identifier.eCip128State [in] Identifies the CIP 128.byFNC1 [in] Identifies the FNC1 separator character, usuallyany ASCII value.dwLength [in] Identifies the bar code length.Return ValuesHRESULT that indicates success or failure.RemarksNone.See AlsoNone.Code 128/EAN 128 Default SettingsParameter Default Valid RangeDecoding Not Active ITC_CODE128_DECODINGEAN 128 Identifier Include ]C1 ITC_EAN128_IDENTIFIERCIP 128 French PharmaceuticalCodesNot Active ITC_CODE128_CIP128FNC1 Separator Character (EAN128 norms)GS function CharASCII 29 or 0x1D0x00`0xFE ITC_CODE128_FNC1_NO_CHANGEBar Code Length Any Bar Code Length 0x00`0xFE ITC_BC_LENGTH_NO_CHANGE

Navigation menu