Intermec Technologies 02CN3 CN3 User Manual CN3 Mobile Computer User s Manual PRELIMINARY

Intermec Technologies Corporation CN3 CN3 Mobile Computer User s Manual PRELIMINARY

UserManual.wiki >

Intermec Technologies >

02CN3 User Manual >

Users Manual part 1 of 3

Contents

Users Manual part 1 of 3

CN3 Mobile ComputerUser's Manual

ContentsCN3 Mobile Computer User’s Manual - PRELIMINARY iiiContentsBefore You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ixSafety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ixGlobal Services and Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ixWho Should Read this Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xRelated Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xPatent Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi1 Using the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Introducing the CN3 Mobile Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Learning Software Build Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Resetting Your CN3 Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Scanning Bar Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Scanning with the 2D Area Imager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Reading Distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Using the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Charging and Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Maximizing Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Checking the Battery Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Adjusting the Beeper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Enabling the Beeper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Disabling the Beeper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Intermec Settings Applet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Using the Color-Coded Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Capitalizing All Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Using the Power (I/O) Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Using the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Software Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13SmartSystems Foundation Console (www.intermec.com/SmartSystems) . . . . . . . 13Intermec Resource Kits (www.intermec.com/IDL) . . . . . . . . . . . . . . . . . . . . . . . . 13Using the Speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Using the Status LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Using the Storage Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Setting the Vibrator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Wireless Network Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Contentsiv PRELIMINARY - CN3 Mobile Computer User’s ManualAccessories for the CN3 Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Physical and Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 Windows Mobile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Software Builds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Where to Find Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Basic Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Today Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Navigation Bar and Command Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Pop-up Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Notifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Entering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Typing With the Onscreen Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Using Block Recognizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Using Letter Recognizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Using Transcriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Selecting Typed Text. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Writing on the Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Selecting the Writing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Converting Writing to Text. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Drawing on the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Creating a Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Selecting a Drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Recording a Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Using My Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Finding and Organizing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Customizing Your CN3 Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Adjusting Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Adding or Removing Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Microsoft ActiveSync. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Microsoft Pocket Outlook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Calendar: Scheduling Appointments and Meetings. . . . . . . . . . . . . . . . . . . . . . . . 38Synchronizing Calendar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Why Use Categories in the Calendar? . . . . . . . . . . . . . . . . . . . . . . . . . . . 39What’s an All Day Event? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40What’s a Recurrence Pattern? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Viewing Appointments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Creating or Changing an Appointment . . . . . . . . . . . . . . . . . . . . . . . . . . 42Creating an All-Day Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Setting a Reminder for an Appointment . . . . . . . . . . . . . . . . . . . . . . . . . 43Adding a Note to an Appointment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Making an Appointment Recurring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Assigning an Appointment to a Category. . . . . . . . . . . . . . . . . . . . . . . . . 45Sending a Meeting Request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Finding an Appointment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Deleting an Appointment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

ContentsCN3 Mobile Computer User’s Manual - PRELIMINARY vChanging Calendar Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Contacts: Tracking Friends and Colleagues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Creating a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Synchronizing Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Viewing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Creating or Changing a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Adding a Note to a Contact. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Assigning a Contact to a Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Copying a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Sending a Message to a Contact. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Finding a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Deleting a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Changing Contacts Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Tasks: Keeping a To Do List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Creating a Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Synchronizing Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Notes: Capturing Thoughts and Ideas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Creating a Note. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Synchronizing Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Messaging: Sending and Receiving E-mail Messages . . . . . . . . . . . . . . . . . . . . . . . 56Synchronizing E-mail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Managing E-mail Messages and Folders. . . . . . . . . . . . . . . . . . . . . . . . . . 57Connecting to a Mail Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Composing and Sending Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Companion Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Word Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Creating a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Typing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Writing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Synchronizing Word Mobile Documents . . . . . . . . . . . . . . . . . . . . . . . . 62Excel Mobile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62Creating a Workbook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Tips for Working in Excel Mobile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63PowerPoint Mobile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Windows Media Player for Windows Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Internet Explorer Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Mobile Favorites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Favorite Links. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Mobile Favorites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Using Internet Explorer Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Viewing Mobile Favorites and Channels . . . . . . . . . . . . . . . . . . . . . . . . . 68Browsing the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 683 Configuring the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Developing Applications for the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Packaging Applications for the CN3 Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Contentsvi PRELIMINARY - CN3 Mobile Computer User’s ManualInstalling Applications on the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Using Microsoft ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Using a Storage Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Using Wavelink Avalanche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Using the SmartSystems Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Updating the System Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Using a Storage Card to Upgrade the Computer . . . . . . . . . . . . . . . . . . . . . . . . . 74Upgrading Both Operating System and SSPB Files . . . . . . . . . . . . . . . . . 74Upgrading the Operating System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Upgrading the SSPB Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Using the SmartSystems Console to Upgrade the CN3 Computer . . . . . . . . . . . . 76Launching Your Application Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76RunAutoRun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77AutoExec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78AutoRun. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79AutoCopy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80AutoReg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81AutoCab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Customizing How Applications Load on the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . 82Configuring CN3 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Configuring the CN3 Computer With Intermec Settings. . . . . . . . . . . . . . . . . . . 84Synchronizing the CN3 Computer System Time with a Time Server. . . . . . . . . . 84Configuring the CN3 Computer through the Network . . . . . . . . . . . . . . . . . . . . 84Configuring the CN3 Computer in a TCP/IP Direct Connect Network. 85Configuring the CN3 Computer in a UDP Plus Network. . . . . . . . . . . . 86Configuring the Color Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87Configuring the SF51 Scanner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Imager Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Creating an SF51 Connection Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Viewing SF51 Scanner Information from Your CN3 Computer. . . . . . . . . . . . . . 90Using Configuration Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 904 Maintaining the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91Upgrading the Operating System on your CN3 Computer . . . . . . . . . . . . . . . . . . . . . . . . 92Troubleshooting Your CN3 Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Cleaning the Scanner and Camera Windows and Screen . . . . . . . . . . . . . . . . . . . . . . . . . . 97

ContentsCN3 Mobile Computer User’s Manual - PRELIMINARY vii5 Network Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Personal Area Networks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Wireless Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101COM Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103Wireless Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105Bluetooth Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Discovering Bluetooth Headsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Connecting to a Bluetooth Headset. . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Configuring Bluetooth Using Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . . 109Connecting with Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110Local Area Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113Configuring 802.11b/g Radio Communications. . . . . . . . . . . . . . . . . . . . . . . . . 113Configuring the Network Parameters for a TCP/IP Network . . . . . . . . 113Configuring the Network Parameters for a UDP Plus Network. . . . . . . 113Phone Application (GPRS/GSM Radios) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114Activation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114Wireless Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114Phone Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Call History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Speed Dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Phone Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Remote Access (Modems) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Connecting to an Internet Service Provider . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Connecting to Work. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Creating a VPN Server Connection to Work . . . . . . . . . . . . . . . . . . . . . . . . . . . 124Ending a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125iConnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126No Networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Wireless Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Ping Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Configuring Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Loading Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Choosing Between Microsoft and Funk Security . . . . . . . . . . . . . . . . . . . . . . . . 130Configuring Funk Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Configuring Microsoft Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153SmartSystems™ Foundation Console (www.intermec.com/SmartSystems) . . . . . 153SNMP Configuration on the Mobile Computer. . . . . . . . . . . . . . . . . . . . . . . . . 154Object Identifiers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155Configuring with SNMP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156

Contentsviii PRELIMINARY - CN3 Mobile Computer User’s ManualI Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

Before You BeginCN3 Mobile Computer User’s Manual - PRELIMINARY ixBefore You BeginThis section provides you with safety information, technical support infor-mation, and sources for additional product information.Safety InformationYour safety is extremely important. Read and follow all warnings and cau-tions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety warnings and cautions.This section explains how to identify and understand dangers, warnings, cautions, and notes that are in this manual..Global Services and SupportWarranty InformationTo understand the warranty for your Intermec product, visit the Intermec web site at www.intermec.com and click Service & Support. The Intermec Global Sales & Service page appears. From the Service & Support menu, move your pointer over Support, and then click Warranty.Disclaimer of warranties: The sample code included in this document is presented for reference only. The code does not necessarily represent com-plete, tested programs. The code is provided “as is with all faults.” All war-ranties are expressly disclaimed, including the implied warranties of merchantability and fitness for a particular purpose.Web SupportVisit the Intermec web site at www.intermec.com to download our current manuals (in PDF). To order printed versions of the Intermec manuals, con-tact your local Intermec representative or distributor.Visit the Intermec technical knowledge base (Knowledge Central) at intermec.custhelp.com to review technical information or to request technical support for your Intermec product.A warning alerts you of an operating procedure, practice, condition, or statement that must be strictly observed to avoid death or serious injury to the persons working on the equipment.A caution alerts you to an operating procedure, practice, condition, or statement that must be strictly observed to prevent equipment damage or destruction, or corruption or loss of data.Note: Notes either provide extra information about a topic or contain spe-cial instructions for handling a particular condition or set of circumstances.

Before You Beginx PRELIMINARY - CN3 Mobile Computer User’s ManualTelephone SupportThese services are available from Intermec Technologies Corporation.Outside the U.S.A. and Canada, contact your local Intermec representative. Click Contact from the Intermec web site to search for your representative.Who Should Read this ManualThis manual is written for the person who is responsible for installing, con-figuring, and maintaining the CN3 Computer.This document provides you with information about the features of the CN3 Computer, and how to install, configure, operate, maintain, and troubleshoot it.Before you work with the CN3 Computer, you should be familiar with your network and general networking terms, such as IP address.Related DocumentsThis table contains a list of related Intermec documents and their part numbers.The Intermec web site at www.intermec.com contains our documents (as PDF files) that you can download for free.Service DescriptionIn the U.S.A. and Canada, call 1-800-755-5505 and choose this optionOrder Intermec products•Place an order.• Ask about an existing order.1 and then choose 2Order Intermec mediaOrder printer labels and ribbons.1 and then choose 1Order spare parts Order spare parts 1 or 2 and then choose 4Tec h nic a l Supp ort Talk to technical support about your Intermec product.2 and then choose 2Service • Get a return authorization number for authorized ser-vice center repair.• Request an on-site repair technician.2 and then choose 1Service contracts • Ask about an existing con-tract.• Renew a contract.• Inquire about repair billing or other service invoicing questions.1 or 2 and then choose 3

Before You BeginCN3 Mobile Computer User’s Manual - PRELIMINARY xiTo download documents1Visit the Intermec web site at www.intermec.com.2Click Service & Support > Manuals.3In the Select a Product field, choose the product whose documentation you want to download.To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor.Patent InformationThis product is protected by one or more of the following patents: 4882476; 4894523; 4953113; 4961043; 4970379; 4988852; 5019699; 5021642; 5038024; 5081343; 5095197; 5144119; 5144121; 5182441; 5187355; 5187356; 5195183; 5216233; 5216550; 5195183; 5195183; 5218191; 5227614; 5233172; 5241488; 5243602; 5258606; 5278487; 5288985; 5308966; 5322991; 5331136; 5331580; 5342210; 5349678; 5359185; 5371858; 5373478; 5389770; 5397885; 5410141; 5414251; 5416463; 5442167; 5464972; 5468947; 5468950; 5477044; 5486689; 5488575; 5500516; 5502297; 5504367; 5508599; 5514858; 5530619; 5534684; 5536924; 5539191; 5541419; 5548108; 5550362; 5550364; 5565669; 5567925; 5568645; 5572007; 5576529; 5592512; 5594230; 5598007; 5608578; 5616909; 5619027; 5627360; 5640001; 5657317; 5659431; 5671436; 5672860; 5684290; 5719678; 5729003; 5742041; 5761219; 5764798; 5777308; 5777309; 5777310; 5786583; 5793604; 5798509; 5798513; 5804805; 5805807; 5811776; 5811777; 5818027; 5821523; 5828052; 5831819; 5834753; 5834749; 5837987; 5841121; 5842070; 5844222; 5854478; 5862267; 5869840; 5873070; 5877486; 5878395; 5883492; 5883493; 5886338; 5889386; 5892971; 5895906; 5898162; 5902987; 5902988; 5912452; 5923022; 5936224; 5949056; 5969321; 5969326; 5969328; 5979768; 5986435; 5987192; 5987499; 5992750; 6003775; 6012640; 6016960; 6018597; 6024289; 6034379; 6036093; 6039252; 6064763; 6075340; 6095422; 6097839; 6102289; 6102295; 6109528; 6119941; 6128414; 6138915; 6149061; 6149063; 6152370; 6155490; 6158661; 6164542; 6164545; 6173893; 6195053; 6234393; 6234395; 6244512; 6249008; 6328214; 6330975; 6345765; 6356949; 6367699; 6375075; 6375076; 6375344; 6431451; 6435411; 6484944; 6488209; 6497368; 6532152; 6538413; 6539422; 6621942; 6641046; 6681994; 6687403; 6688523; 6732930Docking Station/Device 5052943; 5195183; 5317691; 5331580; 5544010; 5644471There may other U.S. and foreign patents pending.Document Title Part NumberCN3 Mobile Computer Quick Start Guide 962-054-115Intermec Computer Command Reference Manual 073529TE 2000 Terminal Emulation Programmer’s Guide 977-055-008

Before You Beginxii PRELIMINARY - CN3 Mobile Computer User’s Manual

CN3 Mobile Computer User’s Manual - PRELIMINARY 11Using the ComputerThis chapter introduces the CN3 Mobile Computer, developed by Inter-mec to enhance wireless connectivity needs and contains hardware and soft-ware configuration information to assist you in making the most out of your CN3 Computer.Note: Desktop icons and applet icons are shown to the left. Any place that Start is mentioned, tap the following Windows icon in the top, left corner of your CN3 desktop.

Chapter 1 — Using the Computer2 PRELIMINARY - CN3 Mobile Computer User’s ManualIntroducing the CN3 Mobile ComputerThe Intermec CN3 Mobile Computer is a small, ergonomically designed mobile computer built on the Microsoftr Windowsr Mobile 5.0 operating system. It is a lightweight, easy-to-use, reliable computer that runs client/server applications, terminal emulation applications, as well as browser-based applications.The CN3 Computer is available with the following:• 802.11b/g radio option• Bluetooth - *Bluetooth is a trademark owned by Bluetooth SIG, Inc., USA• 128MB SDRAM - no loading option• Disk on Chip (128MB)• EA11, EA11HD, or color camera• GPRS/GSM or CDMA radio options• Single Dock options: attach to USB port on dock, USB-to-Ethernet dongle, or USB-to-Modem dongle• Vehicle Dock: USB adapter cable or USB-to-RS232 adapter cableUse this manual to understand how to use the features and options avail-able on the CN3 Computer.CN3 Computers with an IEEE 802.11b/g radio installed are Wi-Fir certi-fied for interoperability with other 802.11b/g wireless LAN devices.Battery Status LEDScan LED and Intermec Ready-to-Work IndicatorMicrophoneFront Speaker 2 remappable buttonsNotification LED2 remappable buttonsPower switch

Chapter 1 — Using the Computer4 PRELIMINARY - CN3 Mobile Computer User’s ManualScanning Bar CodesUse the scanner to scan and enter bar code data. The type of scanner you are using and the type of bar code you are decoding determines the way you scan the bar code. The CN3 Computer supports scanning 2D images.When you unpack the CN3 Computer, the following bar code symbologies are enabled:• Code 39• Code 128•UPC-A•UPC-E•EAN-8• EAN-13• DatamatrixIf you are using bar code labels that are encoded in a different symbology, you need to enable the symbology on the computer. Use the Intermec Set-tings applet to enable and disable symbologies for your scanner. See the Intermec Computer Command Reference Manual available from the Intermec web site at www.intermec.com.Scanning with the 2D Area ImagerThe CN3 Computer has the 2D area imager, which scans 2D bar code symbologies and supports omni-directional (360°) scanning where you can position the CN3 Computer in any orientation to scan a bar code label. Using the 2D imager is like taking a picture with a digital camera.1Press the power switch to turn on the CN3 Computer, point the scanner window a few inches from the bar code label, and hold steady.2Press the Scan button and center the red aiming beam over the bar code label. The aiming beam is smaller when the imager is closer to the bar code and larger when it is further away. Scan button

Chapter 1 — Using the ComputerCN3 Mobile Computer User’s Manual - PRELIMINARY 5When the CN3 Computer successfully reads a bar code label, a high beep is emitted and the Scan LED lights briefly.3Release the Scan button.If you have problems scanning a bar code with the 2D imager, try following some of these tips to improve the performance of your imager:• Change to another predefined imager mode:• Select 1D if only 1D labels are needed.• Select 1D and 2D Bright Environment if scanning in high ambient light (such as outdoors in sunshine).• Select 1D and 2D Reflective Surface if scanning glossy labels.• Select 1D and 2D Standard for all other cases.• Keep your hand as steady as possible while scanning a label.• Position the imager as close to the bar code as possible while still being able to capture the entire bar code.• Enable only the bar codes that you need to use every day.Below are the minimum reading distances for CN3 Computers using the 2D area imager. When correctly mounted, an exit window reduces reading distances by about 4%.Use Intermec Settings to configure these imager commands. For more information on the commands and their parameters, see the Intermec Com-puter Command Reference Manual (P/N: 073529) available from the Inter-mec web site at www.intermec.com.2D Area Imager Reading Distances with 0.04” SetbacksSymbology Density Near Distance Far DistanceMaxiCode 35 mil 4.98 cm/ 1.96” 33.92 cm/ 12.96”Datamatrix 15 mil 9.30 cm/ 3.66” 16.41 cm/ 6.46”PDF417 10 mil8 mil6.6 mil7.77 cm/ 3.06”8.28 cm/ 3.26”11.33 cm/ 4.46”22.76 cm/ 8.96”20.22 cm/ 7.96”15.77 cm/ 6.21”Code 39 15 mil10 mil8 mil5.23 cm/ 2.06”8.03 cm/ 3.26”11.33 cm/ 4.46”29.87 cm/ 11.76”23.27 cm/ 9.16”19.20 cm/ 7.56”UPC 13 mil 6.25 cm/ 2.46” 31.65 cm/ 12.46”Good Scan LED

Chapter 1 — Using the Computer6 PRELIMINARY - CN3 Mobile Computer User’s ManualReading DistancesTypical reading distances are done in an office environment using office lights (4 lux). Minimum distances are measured in the dark (0 lux). Both reading distances are provided in respective scan engine integration guides. Contact your Intermec representative for more information.The minimum standard reading distances for CN3 Computers built with integrated scan engines are shown on the next pages. When correctly mounted, an exit window reduces reading distances by about 4%.EA11 Standard Minimum Reading Distances with 0.04” SetbacksSymbology Density Minimum Distance Maximum DistanceCode 39 0.125 mm/ 5 mil0.20 mm/ 8 mil0.25 mm/ 10 mil0.50 mm/ 20 mil7.26 cm/ 2.86”3.96 cm/ 1.56”3.45 cm/ 1.36”4.98 cm/ 1.96”12.09 cm/ 4.76”20.98 cm/ 8.26”25.04 cm/ 9.86”40.28 cm/ 15.86”UPC/EAN 0.33 mm/ 13 mil 4.98 cm/ 1.96” 29.92 cm/ 11.66”Datamatrix 0.191 mm/ 7.5mil0.254 mm/ 10 mil0.381 mm/ 15 mil3.71 cm/ 2.46”5.98 cm/ 1.96”*16.41 cm/ 6.46”20.73 cm/ 8.16”27.58 cm/ 10.86”PDF417 0.168 mm/ 6.6 mil0.254 mm/ 10 mil0.381 mm/ 15 mil6.25 cm/ 2.46”4.47 cm/ 1.76”4.98 cm/ 1.96”13.87 cm/ 5.46”21.74 cm/ 8.56”33.43 cm/ 13.16”* Minimum distance depends on symbology length and scan angle.8"4"6"2"0"2"4"in6"8"10"10"cm1050510152020152525050403020100" 16"12"8"4"PDF417 6.6 mils0.125mm / 5mils0.25 mm / 10 mils0.5 mm / 20 milsData Matrix 7.5 mils100% contrast UPC EAN

Chapter 1 — Using the ComputerCN3 Mobile Computer User’s Manual - PRELIMINARY 7Using the BatteriesThe CN3 Computer uses a 8.0 Watt-hour standard pack or 14.0 Watt-hour extended pack replaceable Lithium-Ion (LiIon) battery. Standard packs are of 2.2 A Hr, 3.7 VDC; and extended packs are of 4.0 A Hr, 3.7 VDC. You must fully charge the battery before you can use the CN3 Com-puter. When you change the battery, a backup battery (super capacitor) maintains your status, memory, and real-time clock for at least 5 minutes.Dispose used battery packs promptly. Keep away from children. Contact your Intermec representative for replacement batteries. Several factors determine the life of your battery such as extreme tempera-tures, input devices, and your usage.The CN3 Computer contains an internal super capacitor, a temporary power storage device, that protects state for up to five minutes. This is to give you time to replace the battery pack before state is lost. Be sure to put the computer in a suspend mode before doing so.Charging and Installing the BatteryMake sure you fully charge either the standard or the extended battery pack before you install it in your CN3 Computer. If temperatures are within battery charging range, the standard battery pack takes four hours to charge; the extended battery pack takes five hours. You can charge the battery pack using:• a CN3 Quad Battery Pack Charger• a CN3 Single Dock spare battery pack charge slot• a CN3 Computer with external power appliedThe battery used in this device may present a fire or chemical burn haz-ard if it is mistreated. Do not disassemble it, heat it above 100°C (212°F) or incinerate it.If you fail to replace the battery immediately, you may lose important state or applications.Note: If the CN3 Computer is not on external power and the battery pack is removed, it will suspend when the battery pack is removed.

Chapter 1 — Using the Computer8 PRELIMINARY - CN3 Mobile Computer User’s ManualThe charge/operating power can be applied to the CN3 Computer using any of the following. For more information on these accessories, see “Accessories for the CN3 Computer” on page 18.• AC wall adapter• a Magnetic Card Reader Snap-on• a CN3 Single Dock• a CN3 Multidock, either charge-only or Ethernet• a Cigarette Lighter AdapterTo install the battery, insert the tabs on the charged battery into the CN3 Computer and snap the battery into place.Maximizing Battery LifeBelow are things that you can do to maximize the life of your battery.Checking the Battery StatusThe Battery Status LED above your CN3 display, as shown in the follow-ing illustration, indicates the status of your battery. See the following table to understand the meanings of the lights emitted from the LED.When You Want To: Do This to Save Battery Power:Operate the CN3 Computer and the Low Battery status icon appears or the Battery light comes on.Press I to turn off the CN3 Computer. Remove the battery and insert another fully charged battery as quickly as possible or you may lose state. Or, you can insert the CN3 Computer into a powered CN3 Quad Battery Charger.Stop using the CN3 Computer for five minutes or longer.Make sure the low battery icon is not on the screen and that the Battery light is not turned on. Press I to turn off the CN3 Computer.Store CN3 Computers for more than a day. Save your state and end your computer session, press I to turn off the CN3 Computer, then insert a fully charged battery.Steady Green Battery is more than 95% charged and unit is on a charger.Blinking Red Battery is low.Steady Red Main battery is on charge.Steady Yellow The battery is either out of the unit or the pack temperature is too hot or too cold to charge.Battery Status LED

Chapter 1 — Using the ComputerCN3 Mobile Computer User’s Manual - PRELIMINARY 9Adjusting the BeeperFor information about setting volume levels for screen taps, ActiveSync alert noises, etc., tap Start > Help.Enabling the BeeperYou can use the Power applet to view the status of this battery. Tap Start > Settings > the System tab > the Power icon, then tap the Battery tab.Note: The Backup battery option shown in the Battery tab refers to the super capacitor used by the CN3 Computer to store energy.1Tap Start > Settings > the Personal tab > the Sounds & Notifica-tions icon, then tap the Sounds tab.2Check for which features the CN3 Computer should enable sounds, then tap ok to close.

Chapter 1 — Using the Computer10 PRELIMINARY - CN3 Mobile Computer User’s ManualDisabling the BeeperIf your CN3 Computer has a built-in phone, tapping Off will disable both the beeper and the phone. To disable just the beeper, drag the left slider bar to its bottom position, like in the following illustration.Intermec Settings AppletUse the Intermec Settings applet to gather, view, and update device config-uration settings. Information about the settings you can configure with the Intermec Settings applet is in the Intermec Computer Command Reference Manual (P/N: 073529) available online at www.intermec.com.3Tap the Volume icon at the top of the screen, tap On, then move the slider bar to your desired level. If your CN3 Computer comes with a phone, then be sure to use the left slider bar for the volume and the right slider bar for the phone.To disable the beeper, tap the Volume icon, then drag the left slider to the bottom, or tap Off. Note the change in the Vo l u m e icon.Phone slider barVolume slider bar

Chapter 1 — Using the ComputerCN3 Mobile Computer User’s Manual - PRELIMINARY 11See the Data Collection Resource Kit in the Intermec Developer Library (IDL) for information about data collection functions. The IDL is available as a download from the Intermec web site at www.intermec.com/idl. Con-tact your Intermec representative for more information. Using the KeypadYour CN3 Computer has either of the following keypad overlay options:• The 26-key large numeric keypad is for applications that enter mainly numeric data (0-9). This keypad also lets you enter special characters by pressing color-coded key sequences.• The 42-Key full alphabetic keypad is for applications that enter mainly the entire alphabet and may need to enter numeric data (0-9). This key-pad also provides special characters, symbols, and functions by pressing color-coded key sequences.Tap Start > Settings > the System tab > the Intermec Settings icon to access the applet.26-Key Large Numeric 42-Key Full Alphabetic

Chapter 1 — Using the Computer12 PRELIMINARY - CN3 Mobile Computer User’s ManualUsing the Color-Coded KeysEach keypad available for the CN3 Computer provides color-coded keys to let you access additional characters, symbols, and functions printed on the keypad overlay. Once you understand how to use the color-coded keys and key sequences, you can access all of the additional features printed on the keypad overlay. There are two color-coded modifier keys on the numeric keypad: the orange B key and the green C key. The alphanumeric key-pad just has the orange B color-coded modifier key.You press and release the first key, then press and release the second key to access the color-coded character or function printed above a key. Note that there are several hidden characters (such as < or >) on each CN3 keypad that require using the color-coded keys to access them.Capitalizing All CharactersTo type all alphanumeric characters as uppercase letters, you can enable the Caps Lock feature on the CN3 keypad. To enable Caps Lock:•On the alphabetic keypad, press the B key, then the Shift key. Press the same key sequence to disable the Caps Lock.•On the numeric keypad, press the C key, then the A (backspace) key.Using the Power (I/O) SwitchWhen you press the power switch, you actually suspend the CN3 Com-puter. In this mode, the display and backlight are turned off. This power-saving feature is to prolong battery life.Using the ScreenThe CN3 Computer has a 3.5” diagonal, 240x320 pixel (QVGA) transflec-tive TFT-LCD 64K color display. The screens support Unicode characters, user-programmable fonts, and bitmap graphics.• The toolbar displays the Start flag, the connectivity icon, the volume icon, and the time and next appointment.• The desktop displays shortcuts to some of the applications installed on the CN3 Computer.

Chapter 1 — Using the ComputerCN3 Mobile Computer User’s Manual - PRELIMINARY 13• The taskbar displays the onscreen keyboard icon, Pocket PC links, and icons to any applications that are running, yet are hidden.Your CN3 Computer has a stylus for selecting items and entering informa-tion. Use the stylus in place of a mouse.Software ToolsSmartSystems Foundation Console (www.intermec.com/SmartSystems)This free download tool includes a management console that provides a default method to configure and manage Intermec devices “out-of-the-box,” without the purchase of additional software licenses. This is for con-figuring and deploying multiple devices or managing multiple licenses.You can access the SmartSystems Foundation from the Intermec web site at www.intermec.com/SmartSystems.Intermec Resource Kits (www.intermec.com/IDL)Resource Kits provide tools that build applications using the features of Intermec devices. Resource kits include: Bluetooth, Communications, Data Collection, Device Settings, Mobile Gadgets, Printing, and RFID.You can use resource kits, software development information, and other programming support in the Intermec Developer Library available from the Intermec web site at www.intermec.com/IDL. Tap Touch the screen once with the stylus to select options, close appli-cations, launch applications, or launch menus from the taskbar.Drag Hold the stylus on the screen and drag across the screen to select text and images.Tap and hold Tap and hold the stylus on an icon to see a list of actions available for the item. On the menu that appears, tap the action to perform.DesktopTaskbarToolbar

Chapter 1 — Using the Computer14 PRELIMINARY - CN3 Mobile Computer User’s ManualUsing the SpeakersThe high-volume speaker on the back and the top of the CN3 Computer, is capable of variable volume levels. This speaker is capable of reproducing voice and WAV files, and is used primarily to convey status tones. There is a separate volume control in the toolbar at the top of the display. You can also control the volume using the Intermec Settings applet. Information on this control and applet are on the next page.The front speaker is a full-voice range speaker of cell-phone quality with a separate volume control. See the following paragraph for information about this volume control.Warning: Do not place the speaker next to your ear when the speaker volume is set to “Loud” (maximum), or you may damage your hearing.High-volume speaker on center, backFront Speaker

Chapter 1 — Using the ComputerCN3 Mobile Computer User’s Manual - PRELIMINARY 15Enabling the Speaker and Adjusting the VolumeUsing the Status LEDsThe Good Scan LED on the left shows green when the CN3 Computer successfully decodes a bar code.The center System LED shows blue when the CN3 Computer has success-fully loaded and activated the TE 2000 application.The Battery Status LED on the right alerts you to the status of your battery. If this shows red, the battery needs replacing. Yellow means the battery is low and needs recharging. Green means the battery is good.To enable the speaker and adjust the volume, tap the Volume icon at the top of the screen. Tap On, then move the system volume slider to the desired volume level. Up is louder, down is quieter. If your CN3 Computer comes with a phone, then be sure to use the left slider bar for the volume and the right slider bar for the phone.You can also enable the speaker and adjust the volume with the Intermec Settings applet. Tap Start > Settings > the System tab > the Intermec Set-tings icon, then tap (+) to expand Device Settings > Beeper > Volume. Tap any of the options other than “Off” to enable and adjust. To disable the speaker, tap the Off option.Phone slider barVolume slider barNotificationBattery Status LEDGood Scan LED and Intermec Ready-to-Work Indicator

Chapter 1 — Using the Computer16 PRELIMINARY - CN3 Mobile Computer User’s ManualUsing the Storage CardYou can use a miniature Secure Digital (mini-SD) card to increase file stor-age and install software. The mini-SD card slot is located under a door that is beneath the battery pack. Remove the two screws holding the door to reach the mini-SD card.To Insert the Mini-SD Card1Press the power switch to suspend the CN3 Computer, then remove the battery pack from the back of the CN3 Computer.2Remove the two screws on the miniSD/SIM card slot door. Note the screws to this door are to be torqued to 1.5 in-lbs. 3Gently lift the door to the card slot, then with the metal contacts facing down, insert the mini-SD card into the card slot connector until the card lifts up from the floor of the card slot.4Press the miniSD/SIM card slot door down, insert the two screws, rein-sert the battery pack, then press the power switch.Once the door to the mini-SD is opened (for changing, installing, or removing the SIM or mini-SD card); a cold-boot is performed.To Remove the Mini-SD CardPress the power switch to suspend the CN3 Computer. Remove the battery pack, then the two screws on the miniSD/SIM card slot door. Remove the mini-SD card from the CN3 Computer.Note: MultiMediaCards (MMCs) and CompactFlash (CF) storage cards are not supported in the CN3 Computer.Warning: You can corrupt your mini-SD card if you do not follow these installation and removal procedures exactly. Before installing a mini-SD card, inspect the gasket on the door for any damage or wear, and replace the door if any damage or wear is foundNote: The CN3 Computer will reset if the miniSD/SIM door is opened. The screws to this door must be in place to ensure normal operation.mini-SD/SIM doormini-SD card slotSIM card slot

Chapter 1 — Using the ComputerCN3 Mobile Computer User’s Manual - PRELIMINARY 17Setting the VibratorTo set your CN3 Computer to vibrate, tap the Volume icon at the top of the screen, then tap Vibrate. If your CN3 Computer has a built-in phone, this sets both the volume and the phone to vibrate. Note the icon change.You can also set the vibrate using the Intermec Settings applet. Tap Start > Settings > the System tab > the Intermec Settings icon, then tap (+) to expand Device Settings > Beeper > Vibrate, then tap Vibrate. To disable the vibrate, tap the Beeper option.Or use the Sounds & Notifications applet to set the vibrator. Tap Start > Settings > the Personal tab > the Sounds & Notifications icon, then tap the Notifications tab. Select the event from the Event drop-down list, check Vibrate, then tap ok to close.

Chapter 1 — Using the Computer18 PRELIMINARY - CN3 Mobile Computer User’s ManualWireless Network SupportRadios are installed at the factory and cannot be installed by a user. The CN3 Computer must be serviced to install or replace radios. Contact your Intermec representative for more information. See Chapter 5, “Network Support” for information about supported radios.Accessories for the CN3 ComputerThese are a few of the accessories available for your CN3 Computer. Con-tact your local Intermec representative about ordering these and other accessories that may be available.Quad Battery ChargerUse the Quad Battery Charger to charge up to four CN3 battery packs.Charge-Only MultidockUse the Charge-Only Multidock to hold up to four CN3 Computers with batteries installed, charge batteries, and provide power to CN3 Computers.Ethernet MultidockUse the Ethernet Multidock to hold up to four CN3 Computers with bat-teries installed. The multidock charges the batteries, provides power to the CN3 Computers, and provides one Ethernet connector.Single DockUse the Single Dock to hold a CN3 Computer with its battery installed, charge a spare battery pack, charge the main battery, and provide power to the CN3 Computer. The dock has USB host and client connectors, a mod-ule to convert the USB host to Ethernet, and a module to convert the USB host to modem plug over the USB host connector.BeltUse this item to carry your CN3 Computer if it has either a 1D linear imager or a 2D imager, and also accommodates a handle. This supports either right- or left-handed use.Note: Changes or modifications not expressly approved by Intermec could void the user's authority to operate the equipment.

Chapter 1 — Using the ComputerCN3 Mobile Computer User’s Manual - PRELIMINARY 19Physical and Environmental SpecificationsThis section contains technical information, available features, and options.Physical Dimensions (excluding overmold)Length: 16.0 cm (6.3”)Width: 8.1 cm (3.2”)Height: 3.3 cm (1.3”)Weight: Non-WAN units - 14 ozWAN units w/standard battery - 15 to 16 ozWAN units w/extended battery - 16 to 17 ozHardwareMicroprocessor: Intel XScale PXA270Application Processor: 520 MHz RAMMemory: 128 MB RAMPersistent Storage: 128 MB NAND Flash, provides onboard non-volatile storage of applications and dataRemovable Storage: mini-SD Card Slot, user-accessibleKeypad: 14-key with large numeric keys or 56-key with full alphanumeric keys; both with LED backlightingScanner Options: EA11 scan engine or Color CameraOperating SystemMicrosoft Windows Mobile 5.0SoftwareDevelopment Environments:Embedded Visual C++ 4.0, .NET Compact Framework (VB. NET, C#)IDL: Integrates with leading development environments; supports device-specific features and bar code scanningBrowser support: Internet Explorer 6-compatibleBar Code ScanningOptions of Integrated 2D Area Imager or 1D & PDF417 Linear ImagerSupports all popular 1D and 2D symbologies including Australian Post, British Post, Codabar, Codablock A, Codablock F, Code 11, Code 2 of 5, Code 39, Code 93, Code 93i, Code 128, Datamatrix, Dutch Post, ISBT 128, Interleaved 2 of 5, Macro 2 of 5, Matrix 2 of 5, Maxicode, Micro PDF417, MSI, PDF417, Planet, Plessey, Postnet, QR Code, RSS 14, RSS Expanded, RSS Limited, Telepen, TLC39, UCC-EAN Composite Code, UPC/EANStandard CommunicationsUSB host, USB client, Bluetooth, 802.11b/g, GPRS, CDMA, GPS

Chapter 1 — Using the Computer20 PRELIMINARY - CN3 Mobile Computer User’s ManualWireless LANStandards Compliant: IEEE 802.11g (2.4 GHz - OFDM)IEEE 802.11b (2.4 GHz - DSSS)Data Rates: Up to 54 Mbps for 802.11gUp to 11 Mbps for 802.11bRadio Power Output: 100 mWSecurity: WEP, WPA, 802.11i, 802.1x (EAP-TLS, TTLS, LEAP, PEAP, EAP-FAST)Certifications: Wi-Fi, WPA, WPA2, Cisco Compatible ExtensionsDevice ManagementSmartSystems™ Support: Centralized remote support capability; configures, updates, and maintains single devices or entire populations; real-time or batch, wired or wireless. Based on Wavelink Avalanche™ with Intermec value added utilities.Power SpecificationsOperating: Removable, rechargeable LiIonbatteries; AB8 standard pack, 3.7 VDC, 2.2 AHr, (8 W-hr - 4 hr charge time); or AB9extended pack, 3.7 VDC, 4.0 A Hr, (14 W-hr- 5 hr charge time); battery life is application-dependent; recharging cycle is 4 hours or lessBackup: Super capacitor supplies 5 minutes bridge timewhile replacing the AB8 or AB9 BatteryElectrical SpecificationsExternal Charge Power: 5 V +/- 5% @ 3.5 A max. (18 W max.)EnvironmentOperating temperature: -10° to 50°C (14° to 122°F)Storage temperature: -20° to 70°C (-13° to 158°F)Humidity: 5% to 95% noncondensingElectrostatic Discharge: +8kV Contact Discharge; +15kV DischargeRain and Dust Resistance: IP54 compliantDrop Survival: Multiple 4 ft (1.2 m) drops to steel or concreteScreen SpecificationsTransflective TFT; QVGA Color w/touch panel; 240x320 pixels; 8.9 cm (3.5 in) diagonal active area; 5-level LED backlight control with settingsRegulatory ApprovalsUL and cUL Listed, UL 60950 and UL 1604 and CSA 22.2 No. 157, FCC Part 15, TUV, CE mark

Navigation menu