Intermec Technologies 011005CP01 Mobile computer User Manual CS40

Intermec Technologies Corporation Mobile computer CS40

Contents

user manual 1 of 2

CS40Mobile ComputerUser’s Manual
ii CS40 Mobile Computer User’s ManualIntermec Technologies CorporationWorldwide Headquarters6001 36th Ave.W.Everett, WA 98203U.S.A.www.intermec.comThe information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation.Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation.© 2010 by Intermec Technologies Corporation. All rights reserved.The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license), Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks or registered trademarks of Intermec Technologies Corporation.There are U.S. and foreign patents as well as U.S. and foreign patents pending.
ContentsCS40 Mobile Computer User’s Manual iiiContentsBefore You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiSafety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiGlobal Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiWarranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiWeb Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiiTelephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiiService Location Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiiWho Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ixRelated Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ixPatent Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x1 Using the CS40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1About the CS40 Mobile Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Overview of CS40 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3CS40 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3About the CS40 Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Replacing the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5About Battery Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6About Battery Life and Conservation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7About the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8About the Power Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Entering Characters on the QWERTY Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Entering Characters on the Numeric Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Configuring Backlight Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11About the Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12About the Imager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13About Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Reading Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13About Signature Capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Contentsiv CS40 Mobile Computer User’s ManualAbout the Color Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Taking a Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Recording Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Saving Pictures and Videos to an SD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Inserting a microSD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17How to Enable the Integrated GPS on the CS40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Using the GPSID Installed on the CS40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Improving GPS Performance on the CS40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20About Additional GPS Options for the Computer . . . . . . . . . . . . . . . . . . . . . . . . . .212 Connecting and Configuring the CS40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23How to Configure the CS40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24About SmartSystems Foundation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24How to Connect the CS40 to a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25How to Connect the CS40 to Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25Connecting the CS40 Using 802.11 Radio Communications . . . . . . . . . . . . . . . . .26Connecting the CS40 Using Bluetooth Communications. . . . . . . . . . . . . . . . . . . .27Connecting the CS40 to a Wireless Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Connecting the CS40 Using Ethernet Communications . . . . . . . . . . . . . . . . . . . . .29Connecting the CS40 Using USB Communications . . . . . . . . . . . . . . . . . . . . . . . . . 30About the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Turning On the Phone Using the Wireless Manager. . . . . . . . . . . . . . . . . . . . . . . . .31Activating the UMTS Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Making a Phone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Connecting to an ISP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Connecting to a Network With a VPN Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .343 Developing and Installing Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35How to Develop Applications for the CS40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36How to Package Your Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36How to Choose a Target Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
ContentsCS40 Mobile Computer User’s Manual vHow to Install Applications on the CS40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37Installing Applications Using SmartSystems Foundation Console. . . . . . . . . . . .37Installing Applications Using Microsoft ActiveSync or Windows Mobile Device Center. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38How to Install Applications Using a Scan-to-Connect Bar Code . . . . . . . . . . . . . .38Installing Applications Using a microSD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38How to Update the System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39Updating Multiple CS40s Using SmartSystems Console. . . . . . . . . . . . . . . . . . . . .40How to Send Silent Update Packages to the Computer . . . . . . . . . . . . . . . . . . . . . . 41Updating Individual CS40s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 414 Troubleshooting and Maintaining the Computer . . . . . . . . . . . . . . . . . . 43Calling Product Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44Troubleshooting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45Resetting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Warm Booting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Cold Booting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Clean Booting the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51Cleaning the Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52A Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53Physical and Environmental Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54CS40 Micro-AB USB Connector Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58CS40 Docking Connector Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58EA11 Imager Reading Distances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56B Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Default Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60C Keypads and Keystrokes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Standard Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Contentsvi CS40 Mobile Computer User’s ManualD Imager Configuration Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Imager Configuration Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Before You BeginCS40 Mobile Computer User’s Manual viiBefore You Begin This section provides you with safety information, technical support information, and sources for additional product information.Safety InformationYour safety is extremely important. Read and follow all warnings and cautions in this document before handling and operating Intermec equipment. You can be seriously injured, and equipment and data can be damaged if you do not follow the safety warnings and cautions.This section explains how to identify and understand warnings, cautions, and notes that are in this document. Global Services and SupportWarranty InformationTo understand the warranty for your Intermec product, visit the Intermec web site at www.intermec.com and click Support > Returns and Repairs > Warranty.Disclaimer of warranties: The sample code included in this document is presented for reference only. The code does not necessarily represent complete, tested programs. The code is provided “as is with all faults.” All warranties are expressly disclaimed, including the implied warranties of merchantability and fitness for a particular purpose.A warning alerts you of an operating procedure, practice, condition, or statement that must be strictly observed to avoid death or serious injury to the persons working on the equipment.A caution alerts you to an operating procedure, practice, condition, or statement that must be strictly observed to prevent equipment damage or destruction, or corruption or loss of data.Note: Notes either provide extra information about a topic or contain special instructions for handling a particular condition or set of circumstances.
Before You Beginviii CS40 Mobile Computer User’s ManualWeb SupportVisit the Intermec web site at www.intermec.com to download our current manuals (in PDF). To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor.Visit the Intermec technical knowledge base (Knowledge Central) at www.intermec.com and click Support > Knowledge Central to review technical information or to request technical support for your Intermec product.Telephone SupportIn the U.S.A. and Canada, call 1-800-755-5505. Outside the U.S.A. and Canada, contact your local Intermec representative. To search for your local representative, from the Intermec web site, click About Us > Contact Us.Service Location SupportFor the most current listing of service locations, click Support >Returns and Repairs > Repair Locations.For technical support in South Korea, use the after service locations listed below:AWOO Systems102-1304 SK Ventium522 Dangjung-dongGunpo-si, Gyeonggi-do Korea, South 435-776Contact: Mr. Sinbum KangTelephone: +82-31-436-1191Email: mjyun@awoo.co.krIN Information System PTD LTD6th FloorDaegu Venture Center Bldg 95Shinchun 3 DongDonggu, Daegu City, KoreaE-mail: jmyou@idif.co.kr or korlim@gw.idif.co.kr
Before You BeginCS40 Mobile Computer User’s Manual ixWho Should Read This ManualThis manual is written for the person who is responsible for installing, configuring, and maintaining the CS40 Mobile Computer. This manual provides you with information about the features of the CS40, and how to install, configure, operate, maintain, and troubleshoot it.Before you work with the CS40, you should be familiar with your network and general networking terms, such as IP address.Related DocumentsYou may find these related software and programming documents useful:•Intermec Settings Command Reference Manual•Intermec Developer Library (IDL) Resource Kit Developer’s Guide•Intermec Browser User’s Manual•Intermec Launcher User’s Manual•Intermec Connection Manager User’s GuideThe Intermec web site at www.intermec.com contains our documents (as PDF files) that you can download for free.To download documents1Visit the Intermec web site at www.intermec.com.2Click the Products tab.3Using the Products menu, navigate to your product page. For example, to find the CS40 computer product page, click Computers > Handheld Computers > CS40.4Click the Manuals tab.If your product does not have its own product page, click Support > Manuals. Use the Product Category field, the Product Family field, and the Product field to help you locate the documentation for your product.
Before You Beginx CS40 Mobile Computer User’s ManualPatent InformationProduct is covered by one or more of the following patents:5,155,659; 5,243,602; 5,278,487; 5,289,378; 5,305,181; 5,308,966; 5,317,691; 5,319,184; 5,322,991; 5,324,925; 5,327,308; 5,331,580; 5,342,210; 5,345,146; 5,347,115; 5,349,497; 5,349,678; 5,359,185; 5,362,953; 5,363,031; 5,371,858; 5,389,770; 5,397,885; 5,401,591; 5,401,592; 5,404,493; 5,408,382; 5,410,141; 5,413,529; 5,414,251; 5,416,463; 5,440,315; 5,442,167; 5,457,629; 5,463,305; 5,464,972; 5,465,207; 5,466,170; 5,468,945; 5,468,947; 5,468,948; 5,468,950; 5,473,242; 5,477,044; 5,486,689; 5,487,161; 5,493,199; 5,500,516; 5,502,297; 5,504,367; 5,510,589; 5,514,858; 5,515,215; 5,517,373; 5,517,434; 5,521,370; 5,534,684; 5,536,124; 5,536,924; 5,539,191; 5,541,419; 5,544,010; 5,548,108; 5,548,201; 5,550,362; 5,550,364; 5,553,084; 5,554,822; 5,555,459; 5,557,092; 5,563,748; 5,565,669; 5,568,016; 5,568,645; 5,576,529; 5,576,601; 5,576,981; 5,587,577; 5,598,007; 5,598,082; 5,608,578; 5,616,909; 5,625,555; 5,627,360; 5,630,090; 5,631,539; 5,640,001; 5,644,471; 5,659,431; 5,671,436; 5,672,860; 5,682,299; 5,684,290; 5,694,318; 5,710,728; 5,714,812; 5,717,313; 5,719,678; 5,726,937; 5,733,673; 5,736,725; 5,747,785; 5,747,938; 5,764,798; 5,773,159; 5,777,309; 5,780,992; 5,786,583; 5,795,664; 5,796,359; 5,798,513; 5,798,610; 5,802,379; 5,805,416; 5,805,474; 5,811,776; 5,811,777; 5,811,828; 5,818,027; 5,818,199; 5,821,523; 5,828,052; 5,834,749; 5,834,753; 5,834,760; 5,838,471; 5,841,402; 5,841,403; 5,842,070; 5,844,222; 5,854,478; 5,856,737; 5,862,267; 5,869,840; 5,872,354; 5,873,070; 5,877,486; 5,878,395; 5,886,338; 5,889,818; 5,892,971; 5,895,906; 5,896,214; 5,898,290; 5,902,987; 5,902,988; 5,912,452; 5,912,547; 5,914,585; 5,923,022; 5,936,224; 5,939,700; 5,943,421; 5,961,337; 5,969,326; 5,969,328; 5,969,502; 5,973,645; 5,979,768; 5,987,192; 5,987,499; 5,992,750; 5,992,751; 5,996,080; 5,996,896; 6,003,773; 6,003,775; 6,012,638; 6,012,640; 6,012,939; 6,016,960; 6,018,597; 6,024,289; 6,026,027; 6,031,524; 6,034,379; 6,036,093; 6,037,919; 6,039,252; 6,039,258; 6,042,414; 6,049,813; 6,052,279; 6,053,759; 6,058,000; 6,061,155; 6,064,763; 6,076,731; 6,091,227; 6,094,029; 6,095,422; 6,097,839; 6,102,266; 6,102,289; 6,102,295; 6,109,528; 6,112,206; 6,113,047; 6,119,941; 6,124,800; 6,128,414; 6,131,815; 6,135,810; 6,137,260; 6,149,059; 6,149,061; 6,149,063; 6,152,370; 6,155,490; 6,158,661; 6,161,123; 6,163,359; 6,164,542; 6,164,545; 6,173,893; 6,174,180;
Before You BeginCS40 Mobile Computer User’s Manual xi6,177,926; 6,186,406; 6,199,044; 6,204,632; 6,204,825; 6,212,401; 6,213,400; 6,229,408; 6,234,393; 6,234,395; 6,236,186; 6,236,486; 6,243,258; 6,249,008; 6,259,044; 6,292,437; 6,295,461; 6,307,349; 6,321,986; 6,328,214; 6,330,972; 6,330,974; 6,330,975; 6,345,765; 6,356,949; 6,367,699; 6,375,076; 6,398,105; 6,404,325; 6,435,411; 6,478,223; 6,484,944; 6,488,209; 6,497,368; 6,532,152; 6,538,413; 6,539,064; 6,539,422; 6,641,046; 6,669,087; 6,687,403; 6,691,922; 6,694,359; 6,701,361; 6,724,510; 6,731,713; 6,732,930; 6,776,342; 6,857,013; 6,879,428; 6,897,776; 6,944,446; 6,967,280; 6,970,459; 6,976,062; 7,027,037; 7,034,659; 7,035,466; 7,090,137; 7,095,383; 7,117,374; 7,125,743; 7,139,870; 7,143,941; 7,152,797; 7,159,764; 7,180,640; 7,184,068; 7,185,819; 7,190,835; 7,206,338; 7,208,916; 7,210,633; 7,232,072; 7,249,302; 7,271,679; 7,296,749; 7,298,791; 7,325,741; 7,327,988; 7,347,375; 7,360,705; 7,392,951; 7,407,105; 7,411,501; 7,412,097; 7,413,125; 7,417,809; 7,418,157; 7,427,912; 7,444,516; 7,451,441; 7,451,931; 7,451,933There may be other U.S. and foreign patents pending.
Before You Beginxii CS40 Mobile Computer User’s Manual
11Using the CS40This chapter introduces the CS40 Mobile Computer with Windows® Mobile® 6.5 and describes the basic features of the computer. This chapter contains these topics:•About the CS40 Mobile Computer•Overview of CS40 Features•CS40 Accessories•About the CS40 Battery•About the Keypad •Adjusting the Volume•Configuring Backlight Settings•About the Status LEDs•About the Imager•About Bar Codes•About the Color Camera•Inserting a microSD Card•How to Enable the Integrated GPS on the CS40
Chapter 1 — Using the CS402 CS40 Mobile Computer User’s ManualAbout the CS40 Mobile ComputerThe Intermec CS40 Mobile Computer is a small, lightweight mobile computer built on the Microsoft® Windows® Mobile 6.5 operating system. This Personal Digital Assistant PDA-style mobile computer supports the latest High Speed Uplink Packet Access (HSUPA). CS40 Front ViewCS40 Back ViewUSB connectorDocking connectorScan buttonOn/ONotification LEDKey Status LEDBattery Status LEDGood Read LEDCameraFlashSpeakerImager
Chapter 1 — Using the CS40CS40 Mobile Computer User’s Manual 3Overview of CS40 FeaturesThe CS40 includes these standard features:•EA11 area imager that can read bar codes and capture signatures•Multi-processor architecture with 256 MB DRAM and 512 MB Flash (approximately 350 MB free for custom applications)•3.75G UMTS (with EDGE, GPRS, and GSM fallback), 802.11b/g, and Bluetooth® radio•Integrated GPS receiver•3-megapixel color camera•Customer-accessible micro-SD slot for removable memory cards up to 32 GB•Customer-accessible SIM card slot•Numeric or QWERTY keypadCS40 AccessoriesThe CS40 accessories are sold and ordered separately. For help, contact your local Intermec sales representative.The CS40 Mobile Computer with an IEEE 802.11b/g radio installed is Wi-Fi® certified for interoperability with other 802.11b/g wireless LAN devices.CS40 AccessoriesAccessory DescriptionCS40 Battery (Model 1005AB01)The battery provides main power to the CS40.Universal Cell Phone ChargerUse the universal cell phone charger to provide power to your CS40 from an external power supply.DX1 Desktop Dock (Model 1002UU02)Use the desktop dock with the: •CS40 cup (Model 1002UC06) to charge the battery while it is installed in the CS40.•CS40 battery cup (Model 1002UC05) to charge the battery.
Chapter 1 — Using the CS404 CS40 Mobile Computer User’s ManualAbout the CS40 BatteryThe CS40 uses a battery pack (Model 1005AB01) as its main power source. Charging the BatteryYou need to fully charge the battery before using your CS40 for the first time.DX2 Dual Base (Model 1002UU01) and DX4 Quad Base (Model 1002UU03)Use these charger bases with the: •CS40 cup (Model 1002UC06) to charge two or four batteries while they are installed in the CS40.•CS40 battery cup (Model 1002UC05) to charge charge two or four batteries.Vehicle Power Adapter (Model 9005AX01)Use the vehicle power adapter to provide power to the CS40 from your vehicle.Power and Data Y-CableUse the power and data y-cable to provide power to your CS40 from an external power supply and provide USB communications with your PC.Vehicle Holder Use the vehicle holder to hold your CS40 while you are using it in a vehicle.Holster and Purse HolsterUse the holster accessories to carry your CS40 when you are not using it.CS40 Accessories (continued)Accessory DescriptionThe battery used in this device may present a fire or chemical burn hazard if it is mistreated. Do not disassemble it, heat it above 100°C (212°F) or incinerate it. Dispose of used batteries promptly. Keep away from children.Note: If the CS40 is not using external power and you remove the battery pack, the CS40 goes into a power off state and then cold boots.
Chapter 1 — Using the CS40CS40 Mobile Computer User’s Manual 5To charge the battery•Use one of the charging accessories listed in the next table.Replacing the BatteryThe CS40 resets when you remove the battery.To replace the battery1Save your files and close any open applications.2Tap Start > Shutdown to turn off the CS40.3Push the battery release tab forward until the battery releases, and lift the battery away from the CS40.Charging Times for the CS40 BatteryAccessory Charging TimeUniversal cell phone charger 4 hoursDX1 desktop dock and CS40 cup 6 hoursDX1 desktop dock and CS40 battery cup 6 hoursDX2 or DX4 base and CS40 cup 6 hoursDX2 or DX4 base and CS40 battery cup 6 hoursVehicle power adapterData and power y-cable variable** When you charge your CS40 from your PC, the charge time depends on the amount of power provided by the USB port on your PC.
Chapter 1 — Using the CS406 CS40 Mobile Computer User’s Manual4Insert the bottom of a fully charged battery into the CS40, and press down firmly on the top of the battery. Make sure that the battery release tab is fully engaged.About Battery StatusUse the battery icon to see the power status of your battery.Use the battery status LED to see the charging status of your battery.Battery Icon StatusIcon StatusBattery is fully charged.Battery has a medium charge. You should be able to work for several more hours before changing batteries.Battery is low. You need to charge or replace the battery soon.Battery is critically low. You need to replace the battery now.Battery is charging.Battery Status LED States LED State DescriptionSteady green The CS40 is connected to a charger and the battery is more than 95% charged.Blinking red The battery is low. The CS40 goes into Suspend mode. Charge or replace the battery.Steady red The CS40 is connected to a charger and the battery is charging.Steady amber There is a battery error. The battery may be outside the allowable charging temperature or you may need to replace the battery.Off The CS40 is not on external power and the battery is operating normally.
Chapter 1 — Using the CS40CS40 Mobile Computer User’s Manual 7About Battery Life and ConservationBatteries that are stored outside the CS40 for long periods of time slowly discharge. Intermec recommends storing the battery in a charger to maintain battery performance.Battery Conservation TipsWhen You Want To: Do This to Save Battery Power:Use the CS40 and the Low Battery status icon appears or the Battery light comes on.•Connect the CS40 to an external power source.•Or, save your data and tap Start > Shutdown. After the CS40 turns off, remove the battery and insert a fully charged battery. Stop using the CS40 for 5 minutes or longer.Make sure the low battery icon is not on the screen and the Battery light is not turned on. Press and hold the Power button for about 2 seconds to suspend the CS40.Store the CS40 for more than a day.If you are storing the CS40 for a few days, such as over the weekend, install a charged battery or connect the CS40 to a power source.If you are storing the CS40 for longer, remove and charge the battery, and then store both the battery and CS40 in a cool location. If you store the battery for several months, recharge the battery to keep it at peak performance.Store the battery outside the CS40.Store the batteries in a charger.
Chapter 1 — Using the CS408 CS40 Mobile Computer User’s ManualAbout the Keypad The CS40 comes with either a QWERTY or numeric keypad.CS40 QWERTY KeypadCS40 Numeric KeypadAbout the Power ButtonWhen you press and hold the Power button for about 2 seconds, you put the CS40 into suspend mode. In this lower power mode, the CS40 continues to supply power to all memory, but turns off power to most hardware, such as the display. This power-saving feature is designed to prolong battery life.EnterSpaceCXZVBNMFDSAGHJKLREWQTYIOPU1234567809Esc‘:/sym%+’*&EscEnter4172580369
Chapter 1 — Using the CS40CS40 Mobile Computer User’s Manual 9Entering Characters on the QWERTY KeypadYou need to use the orange modifier key b and the Shift key [ to access all characters and functions.To type a character•Press the key for the character. To type a character or access a function on the overlay1Press b. The key status LED turns orange.2Press the key for the character or function. To only type characters or access functions on the overlay•Press b twice. The key status LED turns orange and stays on.To type uppercase letters1Press b [ to turn on Caps Lock. The key status LED turns green.2Press the key for the character.Caps Lock stays on until you press b [ again. While Caps Lock is on:•you can type orange modifier characters by pressing b and the key for that character. •you can type lowercase letters by pressing [ and the key for the character.For information on how to enter specific characters with keystrokes, see Appendix C, “Keypads and Keystrokes.”Entering Characters on the Numeric KeypadYou need to use the orange modifier key b and the green modifier key c to access all characters and functions.To type a character•Press the key for the character.
Chapter 1 — Using the CS4010 CS40 Mobile Computer User’s ManualTo type a character or access a function in orange on the overlay1Press b. The key status LED turns orange.2Press the key for the character or function. The orange modifier key stays on until you press b again.To type lowercase letters1Press c. The key status LED turns green.2Press the corresponding number key as many times as necessary depending on the position of the letter you want to type. For example, to type a lowercase letter z, press c9999.To type uppercase letters1Press c 1 to turn on Caps Lock. The key status LED turns green.2Press the number key as many times as necessary depending on the position of the letter you want to type. Caps Lock stays on until you press c 1 again. While Caps Lock is on:•you can type orange modifier characters by pressing b and the key for that character. •you can type lowercase letters by pressing c and the corresponding number key as many times as necessary depending on the position of the letter you want to type. For information on how to enter specific characters with keystrokes, see Appendix C, “Keypads and Keystrokes.”Adjusting the VolumeYou can adjust the computer volume for your needs and your environment. The volume includes sounds you hear when you tap the screen or read bar codes with the imager. You can set the volume to off, very low, low, medium, high, very high (default), or vibrate.
Chapter 1 — Using the CS40CS40 Mobile Computer User’s Manual 11To adjust the volume1Tap the Volume ( ) icon at the top of the screen, and then tap the volume icon from the menu. 2Use your stylus or the u and d keys to adjust the volume slider to the volume you want, select Vibrate, or select Off.Configuring Backlight SettingsYou can turn on the backlight to see the screen better, or you can turn off the backlight to help conserve battery power. To turn the backlight on and off•If you have a QWERTY keypad, press f.•If you have a numeric keypad, press b ..By default, the CS40 goes into Screen Off mode when there is no activity. Screen Off mode turns off the backlight and display. Press a key or tap the screen to resume activity.
Chapter 1 — Using the CS4012 CS40 Mobile Computer User’s ManualTo configure the backlight1Tap the Battery ( ) icon at the top of the screen, and then tap the battery icon from the menu. 2With Turn off backlight if device is not used for checked, select the timeout value (30 seconds, or 1 to 5 minutes).About the Status LEDsThe CS40 has four status LEDs.Location of the Status LEDsStatus LED DescriptionsLED Color DescriptionNotification Amber The computer is notifying you of a pending alarm or message.Good Read Green The computer has successfully decoded a bar code.Battery See “About Battery Status” on page6. Key Status Green Caps Lock is enabled (QWERTY keypad).Green function keys are enabled (numeric keypad).Amber Orange function keys are enabled.Notification LEDKey Status LEDBattery Status LEDGood Read LED
Chapter 1 — Using the CS40CS40 Mobile Computer User’s Manual 13About the ImagerThe CS40 uses an area imager to perform these tasks:•Read bar codes, including 1D, 2D, and composite symbologies and postal codes. •Capture signatures. Use the imager to “photograph” signatures on business forms, or to capture onscreen signatures or line drawings. About Bar CodesTo easily enable or disable bar code symbologies, read one of the bar codes in the table, “Symbology Bar Codes” on page73.You can use EasySet to create configuration bar codes specific to your system. You can download a free copy of EasySet from the CS40 web page on the Intermec web site at www.intermec.com.To develop an application you can use to configure the imager, use the Data Collection Resource Kit. The resource kit is part of the Intermec Developer Library (IDL) and can be downloaded from the Intermec web site at www.intermec.com/idl. Reading Bar CodesUse the imager to scan 1D and 2D bar code symbologies, composite symbologies, and postal codes. You can position the CN4 in almost any orientation to scan a bar code label.Note: When the Pictures & Videos application is running, you cannot use the imager.
Chapter 1 — Using the CS4014 CS40 Mobile Computer User’s ManualTo read a bar code1Enable only the bar code symbologies that you need.2Use Intermec Settings to choose the predefined imager mode that best suits your environment:3Point the imager window at the bar code label, and hold the CS40 steady a few inches from the label.4Press the Scan button. The laser pointer and illumination beam and frame appear. Predefined Mode For Scanning1D Only 1D labels.1D and 2D Standard (Default) All types of bar code labels.1D and 2D Bright Environment In high ambient light, such as outdoors in the sunshine.1D and 2D Reflective Surface Glossy labels.Custom In conditions that require customized settings. For complete information about these settings, commands, and parameters, see the Intermec Settings Command Reference Manual.Scan button
Chapter 1 — Using the CS40CS40 Mobile Computer User’s Manual 155Use the laser pointer as a guide and aim toward the middle of the bar code. Make sure that the illumination frame covers the bar code you are trying to decode.When the CS40 successfully reads a bar code label, the Good Read LED turns on briefly. 6Release the Scan button.About Signature CaptureA signature capture is a grayscale image of a signature on paper or other business form. To use signature capture in your applications, use the SignatureCapture components in the Data Collection Resource Kit.Ink capture is the process of saving an onscreen image, such as a signature or simple line drawing, to a file. To use ink capture in your applications, use the InkCapture components in the Mobile Gadgets Resource Kit.Both Resource Kits are part of the Intermec Developer Library (IDL) which you can download from the Intermec web site at www.intermec.com/idl.About the Color CameraYou can use the color camera to:•take, view, and edit pictures. •record and launch video clips stored on the CS40 or a microSD card.•configure camera options.You can also send pictures and video clips to others or save an image as the background on the Today screen. Note: While the Pictures & Videos application is running, you cannot use the imager.
Chapter 1 — Using the CS4016 CS40 Mobile Computer User’s ManualTaking a PictureYou can take photos in high, normal, or low quality, with image sizes up to 2048 x 1536 pixels. When you take a picture, the image is saved as a .jpg file and stored in the /My Documents/My Pictures folder. To take a picture with the camera1Tap Start > Pictures & Videos.2Tap the Camera icon, the Camera button, or press Enter.3Using the screen as a viewfinder, move the camera until you have the image you want to capture.Press u to zoom in, or press d to zoom out.4Tap Take Pic or press Enter to take and save the picture. If you choose to save your pictures to Main memory, they are saved to permanent storage on the CS40.Recording VideoYou need to switch to video mode to record video. When you record video, the video is saved as an .mp4 file and stored in the /My Documents/My Pictures folder. To switch to Video mode and record video1Tap Start > Pictures & Videos.2Tap the Camera icon, the Camera button, or press Enter.3Tap Menu > Video. The camera icon in the lower right corner turns into a video camera, and the Record button replaces the Take Pic button.4Using the screen as a viewfinder, move the camera until you see the scene you want to record.Press u to zoom in, or press d to zoom out.5Tap Record or press Enter to start recording. 6When you are done, tap Stop or press Enter to stop recording and save the video. If you choose to save your videos to Main memory, they are saved to permanent storage on the CS40.
Chapter 1 — Using the CS40CS40 Mobile Computer User’s Manual 17Saving Pictures and Videos to an SD CardPictures and videos are automatically saved to the main memory on your CS40. You can save your pictures and video to an SD card to easily transport them to another device.To save picture and video files to an SD card1Install a miniSD card.2Tap Start > Pictures & Videos.3Tap the camera icon.4Tap Menu > Settings.5From the Save file to list, select SD card, and tap OK. Inserting a microSD CardYou can use a microSD card to increase file storage and install software. The CS40 supports an optional 32 GB maximum capacity microSD™ card.To install a microSD card1Tap Start > Shutdown to turn off the CS40.2Push the battery release tab forward until the battery releases, and lift the battery away from the CS40.3Open the card access door.
Chapter 1 — Using the CS4018 CS40 Mobile Computer User’s Manual4Slide the microSD card door to the left to unlock it and open the door. 5Slide the microSD card into place.6Close the microSD card door and slide it to the right to lock it in place.7Close the card access door.8Install the battery.9Press the Power button. The CS40 cold boots.How to Enable the Integrated GPS on the CS40The CS40 comes equipped with an integrated Global Positioning System (GPS) receiver. It can deliver standards-based National Marine Electronics Association (NMEA) data strings to GPS applications. Intermec recommends that you use the GPS Intermediate Driver (GPSID) instead of directly accessing the GPS hardware. The GPSID is a Microsoft software component that interacts between applications and the GPS hardware. Using the GPSID allows Intermec support for Extended Ephemeris, which enhances GPS performance by:•reducing the amount of time it takes your GPS receiver to acquire a fix.•eliminating the need to obtain precise satellite data information from the GPS satellites.
Chapter 1 — Using the CS40CS40 Mobile Computer User’s Manual 19And, as a Microsoft software component, the GPSID also provides these benefits:•Allows multiple applications to simultaneously access the GPS data stream.•Provides access to GPS data without requiring applications to recognize and parse NMEA syntax.Using the GPSID Installed on the CS40To use the GPSID installed on your computer, you need to configure the GPSID settings.To configure your GPSID settings1Tap Start > Settings > System > External GPS. The GPS Settings screen appears with Programs selected.2Select the COM port that you want your programs to use to get GPS data from your CS40.
Chapter 1 — Using the CS4020 CS40 Mobile Computer User’s Manual3Tap Access and select the Manage GPS automatically check box.4Tap ok.Improving GPS Performance on the CS40The integrated mobile computer GPS module has three operating modes: •Standalone-GPS (default)•Assisted GPS •Qualcomm XTRAIn Standalone mode, the CS40 GPS module relies solely on GPS satellites to determine position. In Assisted GPS mode, the mobile computer can determine position without receiving GPS signals directly from satellites; instead, the mobile computer receives GPS signals and information provided by the cellular network. Even when the mobile computer can receive a satellite signal, Assisted GPS can improve position accuracy and reduce the time to determine initial position (Time-To-First-Fix). Check with your cell phone carrier for availability and pricing for Assisted GPS service.
Chapter 1 — Using the CS40CS40 Mobile Computer User’s Manual 21Qualcomm XTRA Assistance technology provides enhanced operation for Standalone-GPS. This option lets the CS40 automatically download a small assistance data file from the XTRA servers through a brief internet access session. To improve GPS performance1Tap Start > Settings > System > GPS Settings.2Select Improve accuracy and choose an operating mode.About Additional GPS Options for the ComputerIntermec provides enhanced feature support for the Extended Ephemeris data capability. For more information about programming for Extended Ephemeris GPS, visit the Intermec Developer Library at www.intermec.com/idl.
Chapter 1 — Using the CS4022 CS40 Mobile Computer User’s Manual
232Connecting and Configuring the CS40Use this chapter to understand how to configure the mobile computer to communicate in your network. This chapter contains these topics:•How to Configure the CS40•About SmartSystems Foundation•How to Connect the CS40 to a PC•How to Connect the CS40 to Your Network•About the Phone•Connecting to an ISP•Connecting to a Network With a VPN Server
Chapter 2 — Connecting and Configuring the CS4024 CS40 Mobile Computer User’s ManualHow to Configure the CS40You can configure many parameters of the CS40, such as the bar code symbologies it decodes or the network settings. The values you set for these configuration parameters determine how the CS40 operates.There are several ways to configure the mobile computer:•You can use the Scan-to-Connect utility, which is part of SmartSystems Foundation, to quickly provide the computer with the minimal information necessary to connect to a secure network. For more information, see the next section “About SmartSystems Foundation.”•You can use a third party device management product that supports the computer, such as the Microsoft System Center Mobile Device Manager. For more information, visit the Microsoft web site at http://msdn.microsoft.com/en-us/default.aspx.•You can use Imager Configuration Bar codes to enable or disable symbologies, reset to factory defaults, and set predefined imager modes. For more information, see “Imager Configuration Bar Codes” on page72.About SmartSystems FoundationSmartSystems™ Foundation is an Intermec software platform that lets you manage all of your SmartSystems-enabled devices simultaneously from a central server. The SmartSystems Console displays all SmartSystems-enabled computers and peripherals in your network.Through the Console, you can:•drag-and-drop configuration bundles, OS updates, and firmware upgrades to multiple computers.•create a “golden” device configuration to use when updating other computers.•remotely change settings on SmartSystems-enabled computers and peripherals.
Chapter 2 — Connecting and Configuring the CS40CS40 Mobile Computer User’s Manual 25With an AutoDeploy license, SmartSystems can automatically push software, configuration settings, and other files to connected mobile computers. AutoDeploy can report on asset locations and battery status, making it easier to manage your mobile devices. The license also enables Scan-to-Connect, which makes connecting additional mobile computers to your secure wireless network as easy as reading bar codes.You can download SmartSystems Foundation at no charge from the Intermec web site. For more information on SmartSystems, go to www.intermec.com/SmartSystems. To purchase an AutoDeploy license, contact your local Intermec sales representative.How to Connect the CS40 to a PCYou can use Microsoft ActiveSync (Windows XP or earlier) or Windows Mobile Device Center (Windows Vista or Windows 7) to establish a connection between your CS40 and PC. After you connect to your PC, you can transfer files, synchronize files, remotely debug, and perform other device management activities. ActiveSync and Windows Mobile Device Center are a free applications available from the Microsoft web site at www.windowsmobile.com/getstarted.To connect your CS40 and PC, you need to physically connect your CS40 to your PC using the power and data y-cable accessory.How to Connect the CS40 to Your NetworkThe CS40 is a versatile mobile computer that you can easily add to your wireless or wired data collection network. You can connect your computer using:•802.11 radio communications.•Bluetooth communications.•Ethernet communications•USB communications.
Chapter 2 — Connecting and Configuring the CS4026 CS40 Mobile Computer User’s ManualConnecting the CS40 Using 802.11 Radio CommunicationsYour CS40 has an 802.11 radio to transfer data using wireless communications. This section assumes that your wireless network is set up, including your access points. To configure 802.11 radio parameters1Tap Start > Settings > Connections.2Tap Wi-Fi. The Wi-Fi page appears.3If the Network you want to connect to is available in the wireless networks list, tap the network name and continue with Step 4.If the Network you want to connect to is not in the wireless networks list:aTap Add New. The Configure Wireless Network page appears.bIn the Network name field, enter the name of your network and tap Next. The Configure Network Authentication page appears.4From the Authentication list, choose either Open, Shared, WPA, WPA-PSK, WPA2, or WPA2-PSK.•If you choose Open or Shared, Data Encryption is automatically set to WEP and the key is automatically provided.•If you choose WPA, Data Encryption is automatically set to TKIP.•If you choose WPA2, Data Encryption should be set to AES.•If you choose WPA-PSK, Data Encryption is automatically set to TKIP and you need to enter a Network key.•If you choose WPA2-PSK, Data Encryption should be set to AES and you need to enter a Network key.Make sure all components with antennas are at least 30 cm (1 ft) apart when power is applied. Failure to comply could result in equipment damage.
Chapter 2 — Connecting and Configuring the CS40CS40 Mobile Computer User’s Manual 275Tap Next.6For EAP type, select either PEAP or Smart Card or Certificate from the list and tap Finish. You return to the Configure Wireless Networks page.7Use the u and d arrow keys to select your network from the list and tap Connect. 8When prompted, enter this network information:•User name•Password9Tap OK. Your CS40 connects to the network.10 Make sure that your CS40 is talking to the network and that the network can see your CS40. If you are connected to the wireless network, a connected icon ( ) appears on the navigation bar and the name of your network appears next to Wi-Fi in the Wireless Manager.Connecting the CS40 Using Bluetooth CommunicationsYour CS40 is Bluetooth™-enabled, which lets you connect to other Bluetooth devices, such as printers. You need to turn on the Bluetooth radio before you can discover and connect to other Bluetooth devices. By default, the radio is turned off.
Chapter 2 — Connecting and Configuring the CS4028 CS40 Mobile Computer User’s ManualTo turn on the Bluetooth radio1Tap Start > Settings > Bluetooth > Mode.2Tap the Turn on Bluetooth check box.3(Optional) If you want your CS40 to be visible to other Bluetooth devices, tap Make this device visible to other devices.4Tap ok.The Bluetooth radio maintains its current state through a warm or cold boot and maintains virtual COM ports. If you clean boot your v, you need to recreate pairings to devices.Connecting the CS40 to a Wireless PrinterTo configure your CS40 for Bluetooth wireless printing, you need to:•make sure Bluetooth power is on. For help, see the procedure in “Connecting the CS40 Using Bluetooth Communications” on page27.•create an application that opens the wireless printing COM port on your CS40. For help, see the Bluetooth Resource Kit, which is part of the Intermec Developer Library (IDL), available from the Intermec web site at www.intermec.com/idl.•select the current wireless printer on your CS40. For help, see the next procedure.
Chapter 2 — Connecting and Configuring the CS40CS40 Mobile Computer User’s Manual 29To select the current wireless printer1Select Start > Settings > System > Wireless Printing.2Tap Search to find a printer, or tap Manual to enter a device address. Follow the onscreen instructions to select the current wireless printer.3(Optional) Tap Print Test Page. The printer prints out the test page.Connecting the CS40 Using Ethernet CommunicationsYou connect your CS40 to your Ethernet network using these accessories:•USB Ethernet adapter cable•Power and data y-cableNote: You can also print wirelessly from inside your applications using Microsoft APIs with Bluetooth extensions for Winsock and Bluetooth virtual COM ports. For help, see the Bluetooth Resource Kit documentation.
Chapter 2 — Connecting and Configuring the CS4030 CS40 Mobile Computer User’s ManualTo use your computer in an Ethernet network1Connect your CS40 to the power and data y-cable. 2Connect the power and data y-cable to the USB connector of the USB Ethernet adapter cable. Ethernet communications is automatically enabled on your CS40.3Make sure that your CS40 is communicating with the network. You should see the network connection icon ( ) in the navigation bar.Connecting the CS40 Using USB CommunicationsYou can use the power and data y-cable accessory to transmit data to and receive data from a desktop PC through USB communications. The USB port supports both USB client and USB host. The port automatically senses the cable you are using and determines which drivers to use. For more information about this accessory and how to order it, see “CS40 Accessories” on page3.About the PhoneYour CS40 supports UMTS mobile wireless phone technology. With the radio module installed in your CS40, you can send and receive telephone calls as well as transmit data through wide-area (WAN) cellular networks.The CS40 has a phone speaker, microphone, and speakerphone. It also supports the use of a Bluetooth headset or hands-free kit. The factory default setting for the phone is disabled.After you turn on the phone and activate service with your wireless carrier, you can customize the features of the phone and network settings. For help, see the online help on your mobile computer.
Chapter 2 — Connecting and Configuring the CS40CS40 Mobile Computer User’s Manual 31Turning On the Phone Using the Wireless ManagerYou can use the Wireless Manager to enable and disable Bluetooth, Wi-Fi, and the phone on your CS40.To turn on the phone using the wireless manager1Tap Start > Settings > Connections > Wireless Manager > Enable > Phone. The phone turns on.2Tap the Personal tab, and then tap Phone to configure the phone. For help, see the next procedure, “Activating the UMTS Radio.”3Tap Done to close the Wireless Manager.Activating the UMTS RadioYou use a SIM card to activate the UMTS/HSPA phone on your CS40. You can purchase the SIM card from your network provider. To install the SIM card and activate the UMTS radio1Tap Start > Shutdown to turn off the CS40.2Push the battery release tab forward until the battery releases, and lift the battery away from the computer.3Open the card access door.
Chapter 2 — Connecting and Configuring the CS4032 CS40 Mobile Computer User’s Manual4Slide the SIM card into the slot in the card access door. 5Close the card access door.6Install the battery.7Press the Power button. The CS40 cold boots.Making a Phone CallAfter you activate your phone, you are ready to start making phone calls. The icon on the navigation bar changes to indicate that the radio is now active.To make a phone call1Tap Start > Phone.2Tap the keys to enter the telephone number you want to call.3Tap the Talk button.Connecting to an ISPYou can connect to your Internet Service Provider (ISP), and use the connection to send and receive e-mail messages and view web pages. Get an ISP dial-up access telephone number, a user name, and a password from your ISP.Tap the Help icon at any time to view additional information for the wizard or the settings.
Chapter 2 — Connecting and Configuring the CS40CS40 Mobile Computer User’s Manual 33To connect to an Internet service provider1Tap Start > Settings > Connections.2Under My ISP, tap Add a new modem connection.3Enter a name for the connection, such as “ISP Connection.”4If you are using an external modem connected to your mobile computer with a cable, select Hayes Compatible on COM1 from the Select a modem drop-down list.5Tap Next.6Enter the access phone number and tap Next.7Enter the User name, Password, and Domain (if provided by an ISP or your network administrator).8Tap Finish.9From the Connections screen, tap the Advanced tab, and then tap Dialing Rules.10 Select Use dialing rules, tap ok at the dialog box, and then tap Edit.11 Specify your current phone type and then tap ok until you exit and return to the Settings page.
Chapter 2 — Connecting and Configuring the CS4034 CS40 Mobile Computer User’s ManualAfter your mobile computer is connected, you can:•send and receive message using Messaging (Outlook E-mail).•visit web pages using Internet Explorer Mobile.Connecting to a Network With a VPN ServerA VPN connection helps you to securely connect to servers, such as a corporate network, through the Internet. Before you can make a VPN connection, you need this information from your network administrator:•User name•Password•Domain name•TCP/IP settings•Host name or IP address of the VPN serverTo create a VPN server connection to work1Tap Start > Settings > Connections.2Under My Work Network, tap Add a new VPN server connection.3Step through the screens to set up your VPN connection.
353Developing and Installing ApplicationsUse this chapter to understand the guidelines for developing applications for use on your CS40. This chapter contains these sections:•How to Develop Applications for the CS40•How to Install Applications on the CS40•How to Update the System Software
Chapter 3 — Developing and Installing Applications36 CS40 Mobile Computer User’s ManualHow to Develop Applications for the CS40Use the Intermec Resource Kits to develop new applications to run on your CS40. The Resource Kits are a library of components grouped by functionality that you can use to create applications for your CS40. The Resource Kits are part of the Intermec Developer Library (IDL), and you can download them from the Intermec web site at www.intermec.com/idl.To use the Resource Kits, you need Microsoft Windows Mobile SDK and Microsoft Visual Studio 2005. For more information on IDL, see the Intermec Developer Library Resource Kit Developer’s Guide.How to Package Your ApplicationFor very simple applications, the executable file may be the only file you need to deploy. More typically, you will have a set of files to install.Intermec recommends using .cab files to install your applications. The CN4 uses standard Windows Mobile .cab files and will install third-party .cab files. How to Choose a Target LocationYou can have your .cab file place your application in any of these memory locations on the CN4: •The ObjectStore.•The optional miniSD card. Depending on available disk space, you may want to consider installing your application files on the miniSD card. Using a card creates the Storage Card folder on the CN4.•The non-volatile Flash File Store. Applications and data in the Flash File Store will persist through a clean boot.Note: The Flash File Store may be erased if you reflash the image.
Chapter 3 — Developing and Installing ApplicationsCS40 Mobile Computer User’s Manual 37Files copied to any of these locations are safe when you cold boot the computer as long as the AutoRun system is installed in the appropriate location. When AutoRun is installed on the computer, all .cab files in the CabFiles folder are automatically extracted after a cold boot. For more information about AutoRun, see the Intermec Developer Library Resource Kit Developer’s Guide.How to Install Applications on the CS40There are several ways you can install files and applications on your CS40:•SmartSystems console•ActiveSync or Windows Mobile Device Center•Scan to Load hands-free software loading function of SmartSystems Foundation•microSD cardFor more information about installing applications, see the Intermec Developer Library Resource Kit Developer’s Guide.Installing Applications Using SmartSystems Foundation ConsoleYou can use the SmartSystems Foundation console to drag-and-drop Intermec applications onto your CS40.To use SmartSystems Scan-to-Connect to connect your CS40 to your network and install software, see the SmartSystems Foundation online Help.To use SmartSystems console to install an application1Download your application file from the Intermec web site and unzip it on your desktop PC.2Double-click the application file to install it. The application file should appear in the Software Vault.3From the SmartSystems console in the Software Vault, drag-and-drop the application onto each CS40 in your network, or drop the application on a group of CS40s contained in a folder.
Chapter 3 — Developing and Installing Applications38 CS40 Mobile Computer User’s ManualFor more information, go to the Intermec web site at www.intermec.com/SmartSystems. Installing Applications Using Microsoft ActiveSync or Windows Mobile Device CenterIf you only have a few CS40s to update with applications, you can copy files using Microsoft ActiveSync or Windows Mobile Device Center.To install an application using Microsoft ActiveSync or Windows Mobile Device Center1On your PC, copy the .cab file you want to download to your CS40.2Create an ActiveSync or Windows Mobile Device Center connection between your PC and your CS40.3Copy the .cab files from your PC to your CS40.4Warm boot or cold boot your CS40. For help, see “Resetting the Computer” on page 50.5After the boot process is finished, browse to the .cab files and tap the files to install them.How to Install Applications Using a Scan-to-Connect Bar CodeYou can use the Scan-to-Connect function in SmartSystems Foundation to create a bar code that loads software. The bar code contains the address of the server where the software to download is located. Once you scan the bar code, it finds the server, downloads the file, and installs it on your CS40. For more information on installing applications using a Scan-to-Connect bar code, see the SmartSystems Foundation Help.Installing Applications Using a microSD CardIf your application requires more disk space than your CS40 can comfortably handle, you can use a microSD card to install applications.
Chapter 3 — Developing and Installing ApplicationsCS40 Mobile Computer User’s Manual 39To install applications using the microSD card1Tap Start > Shutdown to turn off your CS40.2Remove the microSD card. For help, see “Inserting a microSD Card” on page 17.3Insert the microSD card into a microSD adapter card, and then place it in the storage card reader connected to your PC.4Copy your application file to the microSD card.5Remove the microSD card from the adapter card and insert it into your CS40.6On your CS40, navigate to the storage card folder and run your application.How to Update the System SoftwareYour CS40 uses Image Update to update the operating system (OS) and system software. Image Update uses packages to allow for smaller and faster updates because the contents are stored in ROM. Packages persist through a cold or clean boot and cannot be removed by the end user. The Image Update process also provides strengthened security because all packages are signed.Image Update packages (.pkg or .pks files) may contain elements such as DLLs, executable (.exe) files, and .cab files.You can use either of these methods to update your CS40:•You can update multiple computers at the same time using the SmartSystems Console. For help, see the next section, “Updating Multiple CS40s Using SmartSystems Console.”•You can update individual computers by transferring the packages to your mobile computer and then installing them from the mobile computer.If you are using SmartSystems to update your CS40 you can choose to send the updates silently. For more information, see “How to Send Silent Update Packages to the Computer” on page 41.
Chapter 3 — Developing and Installing Applications40 CS40 Mobile Computer User’s ManualUpdating Multiple CS40s Using SmartSystems ConsoleYou can use the SmartSystems console to update the operating system or system software on your CS40. The console is part of SmartSystems Foundation and is available from the Intermec web site through the Intermec Developer Library (IDL). Before you can upgrade your CS40, you need:•SmartSystems Foundation. To download SmartSystems Foundation, go to www.intermec.com/idl and open the Device Management page.•the SmartSystems bundles you want to install. The SmartSystems bundle contains the Image Update package file. These SmartSystems bundles are available from the Intermec web site at www.intermec.com. Go to Support > Downloads.To update your CS40 using SmartSystems Foundation1Open the SmartSystems console.2Make sure the SmartSystems console and your CS40 are on the same subnet and connected wirelessly or through Ethernet.3Make sure that power management is disabled on your CS40.4Download the SmartSystems bundle to your PC.5Double-click the SmartSystems bundle on your PC to extract the update files to the software vault.6From the SmartSystems console, locate the bundle(s) to install.7Drag the application to each mobile computer you want to update or to a group of mobile computers in a folder. The SmartSystems console installs the update on your computers.8After the download is complete, your mobile computer begins the update process and automatically performs a cold boot.The mobile computer then boots into a special Update Loader mode where the computer has no connections and is completely unusable. This process can take anywhere from 30 seconds to 15 minutes depending on the update.Note: The SmartSystems console indicates that your mobile computer is offline, by displaying a red stop sign symbol, until the mobile computer reboots and reconnects to the system.
Chapter 3 — Developing and Installing ApplicationsCS40 Mobile Computer User’s Manual 419After the update is complete, your mobile computer cold boots again. When a confirmation dialog box appears requesting user input, dismiss it.How to Send Silent Update Packages to the ComputerIf you want to automatically download and send update packages to your CS40, you can purchase a SmartSystems AutoDeploy License. The silent updates do not require any user intervention and begin when you choose to have the update process start. SmartSystems Foundation users are notified when update packages are released so that they can download them and update their Intermec computers. For more information, see the SmartSystems Foundation Help.Updating Individual CS40sYou can download update packages from your PC to your CS40 using Microsoft ActiveSync (Windows XP or earlier), Windows Mobile Device Center (Windows Vista or Windows 7), or any other file transfer method you choose. To update an individual CS401Download the Image Update packages you want to install from the Intermec web site at www.intermec.com. Go to Support > Downloads.2Transfer the Image Update packages from your PC to your CS40.3On your CS40, tap Start > File Explorer and navigate to the location of the Image Update package.4Double-tap the package to install it. Your CS40 validates the update package and prompts you to continue with installation.5Tap Install.Your CS40 boots and enters a special Update Loader mode where the computer has no connections and is completely unusable. This process can take anywhere from 30 seconds to 15 minutes depending on the update.6When the installation is complete, an Update Result page appears. Tap Done.
Chapter 3 — Developing and Installing Applications42 CS40 Mobile Computer User’s Manual
434Troubleshooting and Maintaining the ComputerIf you encounter any problems while using the mobile computer, look in this chapter to find a possible solution. You will also find information on routine maintenance. This chapter contains these sections:•Calling Product Support•Troubleshooting the Computer•Resetting the Computer•Cleaning the Computer
Chapter 4 — Troubleshooting and Maintaining the Computer44 CS40 Mobile Computer User’s ManualCalling Product SupportIf you cannot find the answer to your problem in the “Troubleshooting the Computer” section, you can visit the Intermec technical knowledge base (Knowledge Central) at intermec.custhelp.com to review technical information or to request technical support. If you still need help after visiting Knowledge Central, you may need to call Product Support. To talk to an Intermec Product Support representative, call1-800-755-5505.Before you call Intermec Product Support, make sure you have the following information ready:•Configuration number•Serial number•Firmware and software version numbers•Know the language your custom application was written in and the tools you used to create itConsult your application developer for information on your custom application.To find your configuration number and serial number•Look at the CN (configuration number) and SN (serial number) fields on the label inside the battery compartment.To find software and firmware version numbers1Go to Start > Settings > About.2Tap the Packages tab to find software version numbers.3Tap the Build tab to find the firmware version.
Chapter 4 — Troubleshooting and Maintaining the ComputerCS40 Mobile Computer User’s Manual 45Troubleshooting the ComputerUse this section to troubleshoot some common problems you may experience with your CS40. Note: If you send your CS40 in for service, it is your responsibility to save the computer data and configuration. Intermec is responsible only for ensuring that the hardware matches the original configuration when repairing or replacing the computer.Problems While Configuring the Mobile ComputerProblem Possible SolutionYou cannot type a character on the keypad or you can only type uppercase or lowercase letters.You may have locked a modifier key on the keypad. Press the necessary key sequence to unlock the key. For help, see “About the Keypad ” on page8.You press ^ and nothing happens.•Make sure the backlight is on.•The battery may be discharged. Replace the battery with a spare charged battery, or charge the battery.•Reset the mobile computer. For help, see “Resetting the Computer” on page50.You insert a microSD card and cannot find the microSD card folder on the CS40. •The microSD card may not be installed correctly. Insert the microSD card as described in “Inserting a microSD Card” on page17.•The microSD card may be damaged. Try another microSD card.The Battery status LED is on.•If the battery status LED is a steady green, the battery is more than 95% charged and computer is on a charger.•If the battery status LED is blinking red, then the battery is low. Replace or charge the battery.•If the battery status LED is a steady red, the main battery is on charge.
Chapter 4 — Troubleshooting and Maintaining the Computer46 CS40 Mobile Computer User’s ManualThe computer appears to be locked up and you cannot enter data.•Press and hold the power key to turn off the mobile computer, and then press the power key again to turn it on.•Cold boot the mobile computer. For help, see “Cold Booting the Computer” on page50.•Try reloading the firmware. For help, see “How to Update the System Software” on page39.•If the mobile computer does not boot or reset, contact your Intermec representative for help.You tap the screen and nothing happens.•Make sure the mobile computer is not locked.•Align your touch screen.Problems With Wireless ConnectivityProblem Possible SolutionThe mobile computer is connected to the network, and you move to a new site to collect data. Now, your mobile computer is not connected to the network.Move closer to an access point or to a different location to reestablish communications until you reconnect with the network. Any data collected while the mobile computer is out of range is transmitted over the network once the network reconnects.The mobile computer appears to be connected to the network, but the host computer is not receiving any information from the mobile computer.There may be a problem with the connection between the access point and the host computer. Check with network administrator or use your access point user’s manual.Problems While Configuring the Mobile ComputerProblem Possible Solution
Chapter 4 — Troubleshooting and Maintaining the ComputerCS40 Mobile Computer User’s Manual 47Problems While Configuring 802.1x SecurityProblem Possible SolutionThe mobile computer indicates that it is authenticated, but it does not communicate with the host.Make sure the mobile computer IP address, host IP address, subnet mask, default router are configured for the network.The mobile computer does not appear to be authenticating and a network connection icon does not appear on the toolbar.•The mobile computer may not be communicating with the access point. Make sure the mobile computer network name matches the access point network name (SSID). •The 802.1x security network may not be active. Make sure the server software is properly loaded and configured on the server PC. See server software documentation for help.A network connection icon appears in the toolbar, but then disappears.•The mobile computer may not be communicating with the intended access point. Make sure the mobile computer network name matches the access point network name. •The access point may not be communicating with the server. Ensure the access point is turned on, properly configured, and has 802.1x security enabled.You are setting up multiple access points in a network, with different SSIDs, and the connection fails.When you change the SSID, the WEP key values are not saved. Configure the WEP key values and save your changes.
Chapter 4 — Troubleshooting and Maintaining the Computer48 CS40 Mobile Computer User’s ManualThe mobile computer indicates it is not authenticated.Make sure that:•the User Name and Password parameters on the mobile computer match the user name and password on the authentication server. You may need to configure the password on both the mobile computer and the authentication server.•on your authentication server, the user and group are allowed and the group policy is allowed to log into the server. For help, see the documentation that shipped with your authentication server software.•the IP address and secret key for the access point match the IP address and secret key on the authentication server. You may need to configure the IP address and secret key on both your access point and authentication server.•the authentication server software is running on the server PC.You clean boot the mobile computer and this message appears, “The server certificate has expired or your system date is incorrect.”When you clean boot the mobile computer, the date and time are not saved. Configure the date and time and save your changes.Problems While Scanning Bar CodesProblem Possible SolutionYou press the Scan button, but you cannot see a red beam of light.•You may be too far away from the bar code label. Try moving closer to the bar code label and scan it again.•You may be scanning the bar code label “straight on.” Change the scanning angle and try again.•Move within two feet of a wall to test the effective scan of the imager. For help scanning bar codes, see “Reading Bar Codes” on page13.Problems While Configuring 802.1x Security (continued)Problem Possible Solution
Chapter 4 — Troubleshooting and Maintaining the ComputerCS40 Mobile Computer User’s Manual 49When you release Scan button, the Good Read LED does not turn off.If the mobile computer is configured to use continuous/edge triggering, the Good Read LED stays on.If the mobile computer is configured to use level triggering, there may be a problem. Press the Scan button again without scanning a bar code label. If the LED is still on, contact your local Intermec representative.The imager does not read the bar code label.•Aim the scanning beam so that it crosses the entire bar code label in one pass. Try changing the scan angle.•Check the quality of the bar code label, Scan a bar code label that you know scans well. Compare the two bar code labels to see if the bar code quality is too low. You may need to replace the label that you cannot scan.•Make sure the bar code symbology is enabled. For help, see the Data Collection Resource Kit which is part of IDL. You can download the resource kit from www.intermec.com/idl.•Make sure the application is accepting input by scanning a bar code. You may need to type this information instead.The imager does not read the bar code labels quickly, or the scanning beam seems to be faint or obscured.The imager window may be dirty. Clean the window with a solution of ammonia and water. Wipe dry. Do not allow abrasive material to touch the window.The scanned bar code data that appears in your application does not match the data encoded in the bar code label.The mobile computer may have decoded the bar code label in a different bar code symbology. Try scanning the bar code label again. Make sure you scan the entire label.Problems While Scanning Bar Codes (continued)Problem Possible Solution
Chapter 4 — Troubleshooting and Maintaining the Computer50 CS40 Mobile Computer User’s ManualResetting the ComputerYou rarely need to reset the mobile computer. If the CS40 does not resume after pressing the Power button, or if the CS40 or an application locks up, you may need to reset the CS40. The CS40 uses the configuration currently saved in flash memory during the boot process. There are three ways to reset the computer:•Warm booting •Cold booting •Clean booting Warm Booting the ComputerYou may need to perform a warm boot to correct conditions when an application stops responding to the system.To warm boot the computer1Tap Start > Shutdown. The CS40 systematically shuts down.2Press the Power button to turn on the CS40. The CS40 goes through the initialization process and restarts.Cold Booting the ComputerIn some cases when the computer completely stops responding, it may be necessary to perform a cold boot. Because cold booting may result in data loss, only use this method if all other recovery methods have failed.To cold boot your computer1Remove the battery pack from the computer and wait 30 seconds.2Install the battery pack and press ^.Note: Cold booting the computer does not guarantee that cached disk data will be saved, so transactional data may be lost during the reset. All other data is preserved.
Chapter 4 — Troubleshooting and Maintaining the ComputerCS40 Mobile Computer User’s Manual 51Clean Booting the ComputerIf the computer does not warm boot or cold boot, you may need to perform a clean boot. When you clean boot the computer, the computer only loads files and applications that are absolutely required by the operating system. A clean boot returns the computer to an “out of the box” or factory default state, so that you can run diagnostic tests to troubleshoot the normal boot process.To clean boot the computer1Remove the battery pack.2Install the battery pack and press ^.3When the computer starts the boot process, simultaneously press < and > until the IPL Boot Configuration Menu appears on the screen.4Press 2 to select Force Clean Boot and then press 0 to select Continue with Boot. The computer executes the clean boot. This process takes a few minutes.5When prompted, tap the screen to set up the computer.6Follow the instructions to calibrate the screen.The clean boot process erases the mobile computer memory, including all applications and data files in the object store. To preserve applications through a clean boot, store them in the Flash File Store. For more information, see “How to Install Applications on the CS40” on page37.
Chapter 4 — Troubleshooting and Maintaining the Computer52 CS40 Mobile Computer User’s ManualCleaning the ComputerTo keep the computer in good working order, you may need to perform these minor maintenance tasks:•Clean the imager window.•Clean the computer screen.Clean the imager window and computer screen as often as needed for the environment in which you are using the computer. To clean the computer, use a solution of one part ammonia and 3 parts water. To clean the imager window and computer screen1Press ^ to turn off the computer.2Dip a clean towel or rag in the ammonia solution and wring out the excess. Wipe off the imager window and screen. Do not allow any abrasive material to touch these surfaces.3Wipe dry.There are no user-serviceable parts inside the computer. Opening the unit will void the warranty and may cause damage to the internal components.
53ASpecifications
Appendix A — Specifications54 CS40 Mobile Computer User’s ManualPhysical and Environmental SpecificationsPhysical DimensionsLength: 13.1 cm (5.2 in)Width (at widest part): 6.2 cm (2.4 in)Height (at tallest part): 2.4 cm (0.9 in)Weight (with battery): 200 g (7.1 oz)Power and Electrical SpecificationsOperating: Rechargeable lithium-ion batteryBattery capacity: 1480 mAh (7.4 Wh)Electrical rating: x 5 V, 1,5 ATemperature and Humidity SpecificationsOperating temperature: -10°C to 50°C (14°F to 122°F)Storage temperature: -20°C to 70°C (-4°F to 158°F)Charging temperature: 0°C to 45°C (32°F to 113°F)Relative humidity (operating): 5 to 95% non-condensingEnvironmental rating: IP54Screen Specifications•240 RGB x 320 pixels•7.1 cm (2.8 in) diagonal square active area•LED backlight with 5 levels of brightness, including Off•LCD capable of both portrait and landscape operationKeypad Options•Numeric keypad•Alphanumeric keypad (QWERTY)
Appendix A — SpecificationsCS40 Mobile Computer User’s Manual 55Bar Code SymbologiesThe EA11 imager supports these bar code symbologies:CS40 Micro-AB USB Connector SpecificationsThe CS40 has a standard Micro-AB USB connector:•1A maximum charge when using the universal cell phone charger accessory•maximum VBUS output power of 5 V @ 100 mA•AustraliaPost •GS1 DataBar Omnidirectional•Aztec •Infomail•BPO (British Post 4-state) •Interleaved 2 of 5•ChinaPost •JapanPost•CanadaPost •KoreanPost•Codabar •Matrix 2 of 5•Codablock A •Maxicode•Codablock F •Micro PDF417•Code 11 •MSI•Code 39 •PDF417•Code 93 •Planet•Code 128/GS1-128 •Plessey•DataMatrix •Postnet•DutchPost •QR Code•EAN/UPC •Standard 2 of 5•GS1 Composite •SwedenPost•GS1 DataBar Expanded •Telepen•GS1 DataBar Limited •TLC 39
Appendix A — Specifications56 CS40 Mobile Computer User’s ManualCS40 Docking Connector SpecificationsThe CS40 has an array of seven pin surface contacts that provide USB “On the Go” (OTG) connectivity and charge power while docked.EA11 Imager Reading DistancesTypical reading distances are done in an office environment using office lights (4 lux). Minimum distances are measured in the dark (0 lux). Both reading distances are provided in respective scan engine integration guides. Contact your local Intermec representative for more information.Below are the typical and minimum standard reading distances for the CS40 built with an EA11 imager. When correctly mounted, an exit window reduces reading distances by about 4% for all scan engines.CS40 Docking Connector SpecificationsPin Number Signal Name Description1 VEXT Computer power2 ID Identification pin3 VBUS VBUS (5 V @ 100 mA max)4D- USB data signal5D+ USB data signal6 GND Ground (power return)7 GND Ground (power return)Note: Minimum distances depend on the length of the bar code.
Appendix A — SpecificationsCS40 Mobile Computer User’s Manual 57EA11 Standard Typical Reading DistancesEA11 Standard Typical Reading DistancesSymbology Density Minimum Distance Maximum DistanceCode 39 0.125 mm (5 mil)0.20 mm (8 mil)0.25 mm (10 mil)0.50 mm (20 mil)1 mm (40 mil)7.2 cm (2.8 in)3.8 cm (1.5 in)3.4 cm (1.3 in)5 cm (2 in)8 cm (3.1 in)13.1 cm (5.1 in)22.5 cm (8.8 in)27 cm (10.5 in)44 cm (17.2 in)83 cm (32.4 in)UPC/EAN 0.33 mm (13 mils) 5 cm (2 in) 32 cm (12.5 in)Data Matrix 0.191 mm (7.5 mils)0.254 mm (10 mils)0.381 mm (15 mils)6.3 cm (2.5 in)4.8 cm (1.9 in)*17.3 cm (6.7 in)22 cm (8.6 in)29 cm (11.3 in)PDF417 0.168 mm (6.6 mils)0.254 mm (10 mils)0.381 mm (15 mils)6.25 cm (2.46 in)4.5 cm (1.8 in)4 cm (1.6 in)15.4 cm (6 in)23 cm (9 in)37 cm (14.4 in)8"4"6"2"0"2"4"in6"8"10"10"cm1050510152020152525050403020100" 20"16"12"8"4"PDF417 6.6 mils0.125mm/5mils0.25 mm / 10 mils0.5 mm / 20 milsData Matrix 7.5 mils100% contrast UPC EAN
Appendix A — Specifications58 CS40 Mobile Computer User’s Manual*EA11 Standard Minimum Reading DistancesEA11 Standard Minimum Reading DistancesSymbology Density Minimum Distance Maximum DistanceCode 39 0.125 mm (5 mil)0.20 mm (8 mil)0.25 mm (10 mil)0.50 mm (20 mil)7.26 cm (2.86 in)3.96 cm (1.56 in)3.45 cm (1.36 in)4.98 cm (1.96 in)12.09 cm (4.76 in)20.98 cm (8.26 in)25.04 cm (9.86 in)40.28 cm (15.86 in)UPC/EAN 0.33 mm (13 mils) 4.98 cm (1.96 in) 29.62 cm (11.66 in)Data Matrix 0.191 mm (7.5 mils)0.254 mm (10 mils)0.381 mm (15 mils)3.71 cm (2.46 in)5.98 cm (2.35 in)*16.41 cm (6.46 in)20.73 cm (8.16 in)27.58 cm (10.86 in)PDF417 0.168 mm (6.6 mils)0.254 mm (10 mils)0.381 mm (15 mils)6.25 cm (2.46 in)4.47 cm (1.76 in)4.98 cm (1.96 in)13.87 cm (5.46 in)21.74 cm (8.56 in)33.43 cm (13.16 in)8"4"6"2"0"2"4"in6"8"10"10"cm10505101520201525250 50403020100" 16"12"8"4"PDF417 6.6 mils0.125mm / 5mils0.25 mm / 10 mils0.5 mm / 20 milsData Matrix 7.5 mils100% contrast UPC EAN
59BDefault Settings
Appendix B — Default Settings60 CS40 Mobile Computer User’s ManualDefault ConfigurationThe following tables list the default values of the configuration commands supported on the mobile computer. If you restore the computer to factory default settings, the computer uses these values.The commands are grouped by function and reflect the organization of Intermec Settings. You can configure your computer with Intermec Settings from the SmartSystems Foundation console. For detailed information on most of the commands, see the Intermec Settings Command Reference Manual.Data CollectionSymbology SettingsSymbology Default ValueAustraliaPost DisableAztec DisableBPO DisableCanadaPost DisableChinaPost DisableCodabar DisableCodablock A DisableCodablock F DisableCode 11 DisableCode 39 EnableCode 93 DisableCode 128/GS1-128 EnableDataMatrix EnableDutchPost DisableEAN/UPC Enable UPC A, UPC E, EAN 8, EAN 13GS1 Composite DisableGS1 DataBar Expanded DisableGS1 DataBar Limited DisableGS1 DataBar Omnidirectional Disable
Appendix B — Default SettingsCS40 Mobile Computer User’s Manual 61Infomail DisableInterleaved 2 of 5 DisableJapanPost DisableKoreanPost DisableMatrix 2 of 5 DisableMaxicode DisableMicro PDF417 DisableMSI DisablePDF417 EnablePlanet DisablePlessey DisablePostnet DisableQR Code DisableStandard 2 of 5 DisableSwedenPost DisableTelepen DisableTLC 39 DisableSymbology Option SettingsSymbology Option Default ValuePreamble None (disabled)Postamble None (disabled)Global Symbology ID DisableMulticode DisableSymbology Settings (continued)Symbology Default Value
Appendix B — Default Settings62 CS40 Mobile Computer User’s ManualCommunicationsImager SettingsImager Setting Default ValuePredefined Modes 1D and 2D StandardSignature Image Capture DisableDocument Imaging DisableDecode Security SettingsDecode Security Setting Default ValueConsecutive Data Validation 0Identical Consecutive Timeout 300 msDifferent Consecutive Timeout 0Center Decoding DisableCenter Decoding Tolerance 0Communications SettingsCommunications Setting Default ValueDevice Name CS40xxxxxxxxxxxBluetooth SettingsBluetooth Setting Default ValueBluetooth Power OffBluetooth Discoverable DisableBluetooth Connectable Disable802.11 Radio Settings802.11 Radio Setting Default ValueAllow Security Changes EnableRadio Measurement 0Radio Enabled Enable
Appendix B — Default SettingsCS40 Mobile Computer User’s Manual 63Device SettingsEthernet Adapter SettingsIP Settings Default ValueDHCP EnableDHCP Client Identifier NullPrimary DNS 0.0.0.0Secondary DNS 0.0.0.0Primary WINS 0.0.0.0Secondary WINS 0.0.0.0Certificates SettingsCertificates Setting Default ValueImport Root Certificates FalseImport User Certificates FalseImport Pac Files FalseEthernet Adapter IP SettingsEthernet Adapter IP Setting Default ValueDHCP EnableDHCP Client Identifier NullPrimary DNS NullSecondary DNS NullPrimary WINS NullSecondary WINS NullDevice SettingsDevice Setting Default ValueDate NullTime NullAdjust for Daylight Time DisableGood Read Beep One Beep
Appendix B — Default Settings64 CS40 Mobile Computer User’s ManualBeeper Volume MediumDevice Settings (continued)Device Setting Default Value
65CKeypads and Keystrokes
Appendix C — Keypads and Keystrokes66 CS40 Mobile Computer User’s ManualStandard CharactersUse the following tables to learn how to enter standard and hidden characters and functions with the keypad.Alphanumeric CharactersCharacter QWERTY Keypad Numeric KeypadaAc2bBc22cC c222dDc3eEc33fF c333gGc4hHc44iI c444jJc5kKc55lL c555mMc6nNc66oO c666pPc7qQc77rR c777sS c7777tTc8uUc88vV c888wWc9xXc99
Appendix C — Keypads and KeystrokesCS40 Mobile Computer User’s Manual 67yY c999zZ c9999A[A c12B[B c122C[C c1222D[D c13E[E c133F[F c1333G[G c14H[H c144I[I c1444J[J c15K[K c155L[L c1555M[M c16N[N c166O[O c1666P[P c17Q[Q c177R[R c1777S[S c17777T[T c18U[U c188V[V c1888W[W c19X[X c199Y[Y c1999Z[Z c19999Alphanumeric Characters (continued)Character QWERTY Keypad Numeric Keypad
Appendix C — Keypads and Keystrokes68 CS40 Mobile Computer User’s Manual0bf 01bY 12bU 23bI 34bH 45bJ 56bK 67bB 78bN 89bM 9Characters and FunctionsFunction QWERTY Keypad Numeric KeypadForward Tab iiBack Tab bi biSpace sc0Backspace {{Shift [b or cCaps Lock b[ c1Up Arrow uuDown Arrow ddLeft Arrow b< b<Right Arrow b> b>!bO Not available@bQ Not available#bV #$bE Not available%bR Not availableAlphanumeric Characters (continued)Character QWERTY Keypad Numeric Keypad
Appendix C — Keypads and KeystrokesCS40 Mobile Computer User’s Manual 69&bS Not available*bC *+bT b#ok bP c#-bG b*Start (Windows) bW c*?bA Not available:bD Not available/bF Not available=bL Not available‘ (apostrophe) bZ Not available, (comma) bX Not available. (period) ..Esc ||Backlight fb.Talk ppEnd call hhCharacters and Functions (continued)Function QWERTY Keypad Numeric Keypad
Appendix C — Keypads and Keystrokes70 CS40 Mobile Computer User’s Manual
71DImager Configuration Bar Codes
Appendix D — Imager Configuration Bar Codes72 CS40 Mobile Computer User’s ManualImager Configuration Bar CodesUse the following bar codes to quickly configure the mobile computer imager. These bar codes allow you to enable or disable symbologies, reset to factory defaults, and set predefined imager modes.If you need to create a bar code for a specific setup, please download a free copy of EasySet from the CS40 web page on the Intermec web site at www.intermec.com. Basic Configuration Bar CodesCommand Bar CodeDisable all symbologiesReset to Factory DefaultsPostamble with Carriage Return and Line FeedImager Predefined ModesCommand Bar Code1D codes onlyStandard 1D and 2D codes
Appendix D — Imager Configuration Bar CodesCS40 Mobile Computer User’s Manual 731D and 2D codes bright environment1D and 2D codes with reflective surfaceSymbology Bar CodesSymbology Enable Bar Code Disable Bar CodeAustraliaPostAztecBPOCanadaPostCodabarImager Predefined Modes (continued)Command Bar Code
Appendix D — Imager Configuration Bar Codes74 CS40 Mobile Computer User’s ManualCode 11Code 39Code 93Code 128DataMatrixDutchPostEAN 8EAN 13Symbology Bar Codes (continued)Symbology Enable Bar Code Disable Bar Code
Appendix D — Imager Configuration Bar CodesCS40 Mobile Computer User’s Manual 75GS1 128Interleaved 2 of 5JapanPostMatrix 2 of 5MaxiCodeMicro PDF417MSI CodePDF417Symbology Bar Codes (continued)Symbology Enable Bar Code Disable Bar Code
Appendix D — Imager Configuration Bar Codes76 CS40 Mobile Computer User’s ManualPlanetPlessey CodePostnetQR CodeStandard 2 of 5TelepenTLC 39UPC-ASymbology Bar Codes (continued)Symbology Enable Bar Code Disable Bar Code
Appendix D — Imager Configuration Bar CodesCS40 Mobile Computer User’s Manual 77UPC-EUPC-E1Symbology Bar Codes (continued)Symbology Enable Bar Code Disable Bar Code
Appendix D — Imager Configuration Bar Codes78 CS40 Mobile Computer User’s Manual
Worldwide Headquarters6001 36th Avenue WestEverett, Washington 98203U.S.A.tel 425.348.2600fax 425.355.9551www.intermec.com© 2010 Intermec Technologies Corporation. All rights reserved.CS40 Mobile Computer User’s Manual*935-037-001*P/N 935-037-001

Navigation menu