Intech Electronics CS8042 Bluetooth stereo speaker User Manual MCB 8042010 0A 8042 USER MAN

In Tech Electronics Ltd Bluetooth stereo speaker MCB 8042010 0A 8042 USER MAN

Manual

Http://www.abe-hk.comEnvironmentalfriendlyIndex!!!A/C Adapter and 3 AAA batteryTurning on / Turning off the Traveller SpeakerFunction KeysTo turn on the speaker, please switch the power ON/OFF switch to the “I”position. To turn it off, please switch the power switch to the “O” position.Thank you for buying the new BT90S Traveller Speaker and, or theCS8082 Stereo Audio Adaptor. You can use the A/C power adapter(optional, not provided) to power up the CS8042 directly or place 3 AAA drybatteries into the CS8042 to obtain the power.BluetoothBluetoothI.Traveller Speaker paired with Bluetooth enabled (with A2DP andAVRCP profiles) Mobile Phone / PDA / MP3 Guide1. Battery cover(Insert 3 AAA batteries).2. Power ON/OFF switch.3. DC power input socket(5VDC).4. Audio input socket.5. Backward switch.(only applied to audio devices supporting A2DP and AVRCPProfiles)6. Volume Down switch.7. Forward switch. (only applied to audio devices supporting A2DP and AVRCPProfiles)8. ON/OFF/Pairing/Pause switch.a) When CS8042 is powered on, press and hold (about 2 seconds) untilLED flashes Green to turn ON.b) When CS8042 is powered on, press and hold (about 4 seconds) untilLED flashes Green and Red alternatively to enter into pairing mode.c) When CS8042 is powered on, press and hold (about 4 seconds) untilLED turns red to turn OFF when playing.d) Press it once when playing --- PausePress it once again --- Resume play9. Volume Up switch.BluetoothBluetoothBluetooth BluetoothBluetoothBluetooth BluetoothBluetooth10. a) LED flashes Green -- is ONb) LED flashes Green and Red alternatively -- enters intoPairing modec) LED is red -- will be powered OFF11. Power LED is Blue -- BT90S is Power ONBluetooth BluetoothBluetooth BluetoothBluetooth Bluetooth123CS8042 Traveller SpeakerAndCS8082 Audio Adaptor (optional)User ManualBluetoothBluetoothTHREE possible User Scenarios1. A/C Adapter and 3 AAA battery...............................................................12. Turning on / Turning off the Traveller Speaker and the Audio Adaptor.........13. Function Keys......................................................................................1.........................................................................2. Traveller Speaker paired with enabled (with A2DP and AVRCP..................... ......................... .................... ..............................IBluetoothprofile) Mobile Phone / PDA / MP3 Guide............. .......21.Pairing..................... ............ .................................................32.Listening to music................. ........... ................................3. Traveller Speaker paired with Stereo Audio Adaptor CS8082 Guide..... .....41.Pairing............................. ........................................ ..........42.istening to music...................... ........................................5. Traveller Speaker connected directly with Audio Device Guide................51.listening to music..............................................................................5Accessories Table...............................................................................5FCC Interference Statement......................... ..................................6IIIIIWhen you purchase a Standalone pack with CS8042 Traveller Speaker only,please follow this Guide.1. Pairinga. While the Speaker is powered off, switch the power ON/OFF switch (Key2) to the “I” position to turn it on (Fig.1). The Power LED (Fig.3) willbecome blue. Press and hold BT ON/OFF/Pairing/Pause switch (Key 8,Fig.2) for 4 seconds, the LED will flash red and greenalternatively, which indicates the Speaker in Pairing Mode. The PairingMode will last for one minute.b. Put the Speaker and the enabled (with A2DP and AVRCPprofiles) Mobile Phone / PDA / MP3 close to each other, 0.5 to 3 meters.c. Follow the operation instructions of your enabled (with A2DPand AVRCP profiles) Mobile Phone/ PDA / MP3 to start the pairingprocess. Typically, this has to be done by going to a setup or connectmenu to discover the Speaker. It may take some time to search itdepending on the number of devices nearby.d. Your Mobile Phone / PDA / MP3 will display the model name “CS8042 if ithas found the Speaker; and ask for a passkey. Enter a sequence of“0000 . After successful pairing, follow the instructions to establish theconnection with the Speaker.e. If the pairing is successful, the LED will flash green, whichindicates it is in Standby Mode and ready to receive audio signals from theMobile Phone / PDA / MP3. If pairing does not occur as expected, turn theTraveller Speaker and the audio device off. Wait for 10 seconds andrepeat the pairing process from the beginning (Fig.4).2. Listening to musica. Play the music on the Mobile Phone / PDA / MP3 as normal; you will listento the music from the Speaker.b. The speaker volume can be adjusted by pressing the VOL Up button(Fig.2) / VOL Down button (Fig.2).BluetoothBluetoothBluetoothBluetoothBluetoothBluetooth””Bluetooth mobile phoneBluetooth enabled PDA Bluetooth Traveller Speaker(Fig.1)(Fig.2)(Fig.3)(Fig.4)
This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one of thefollowing measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, includinginterference that may cause undesired operation.FCC Caution: Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority to operate thisequipment.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC RF radiation exposure limits set forth for anuncontrolled environment. To maintain compliance with FCC RF exposurecompliance requirements, please avoid direct contact to the transmittingantenna during transmitting.Federal Communication CommissionInterference Statement54c. While listening to music (for example, song 2), press the Speaker’sFORWARD >> button (Fig.2) will skip to next song (for example, song 3);press the BACKWARD << button (Fig.2) will replay the current song (forexample, song 2). The fast forward & backward are also supported byholding the FORWARD >> or BACKWARD << function keys. This remotecontrol function is supported only by the AVRCP profile in yourenabled devices.d. Turn the Speaker off after use.Remark: Details operation of music playing through A2DP profilevaries from different Mobile Phones / PDAs.BluetoothBluetoothII. Traveller Speaker paired with Stereo Audio Adaptor GuideBT 65NWhen you purchase a Combo pack with CS8042 Traveller Speaker and CS8082Stereo Audio Adaptor, please follow this Guide.Bluetooth Audio Adaptor BluetoothTraveller Speaker1. Pairinga. While the Speaker is powered off switch the power ON/OFF switch (Key2) to the “I” position to turn it on (Fig.1). The Power LED (Fig.3) willbecome blue. Press and hold ON/OFF/Pairing/Pause switch(Fig.2) for 4 seconds, the LED will flash red and greenalternatively, which indicates the Speaker in Pairing Mode. The PairingMode will last for one minute.b. While the CS8042 Stereo Audio Adaptor is powered off, press and holdPLAY and STOP buttons simultaneously. The LED will flash red andgreen alternatively, which indicates the Audio Adaptor is in Pairing Mode.The Paring Mode will last for one minute.c. Put the Speaker and the Audio Adaptor close to each other, 0.5 to 3meters. After a few seconds, their LED's on two devices will turn intoflashing green, which indicates successful pairing. Both units are inStandby Mode and ready to transmit audio signal, or music from the audiosource (Fig.5).,BluetoothBluetooth2. Listening to musica. After successful pairing, plug the jack of the Audio Adaptor to the 3.5 mmsocket of any audio source such as iPod, MP3, CD player, Notebook PC,or other audio devices with audio jack.b. Play the music on the audio source as normal; you will listen to the stereomusic from the speaker.c. The Music volume can only be adjusted by pressing and releasing theVOL+ / VOL - buttons of audio source.d. Turn the Speaker off after use and the Audio Adaptor will be turned offautomatically. Next time, you don’t need to pair them again. Turn themon, and then they will be paired automatically and ready to transmit musicfrom the audio source.III. Traveller Speaker connected directly with Audio Device Guide1. Listening to musica. While the Speaker is powered off, switch the power ON/OFF switch (Key 2)to the “I” position to turn it on (Fig.1). The Power LED (Fig.3) will becomeblue.b. Plug one end of the audio cable to the “Audio input socket” (socket 4,Fig.1) of the Traveller Speaker and the other end to the 3.5 mm socket ofany audio source such as iPod, MP3, CD player, Notebook PC or otheraudio devices.c. Play the music on the audio source as normal; you will listen to the stereomusic from the speaker.d. The Music volume can only be adjusted by pressing and releasing the VOL+ / VOL- buttons of audio source.e. Turn the Speaker off after use.Accessories TableStandalone pack(CS8042)Combo pack(CS8042+CS8082)IncludedIncludedIncludedAudio cableCS8082 Audio Adaptor Not Included Included(Fig.5)6IncludedIncluded3XAAA batteriesNot IncludedUSB Power cablefor CS8082Remarks: Specification of A/C power adaptor for CS8042DC Voltage input: 5V, 500mADC plug: (1.35 X 3.5 X 11) mmThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu