InnoSenT ISYS5010 K-Band Transceiver User Manual 161031 User Manual iSYS 5010 indd

InnoSenT GmbH K-Band Transceiver 161031 User Manual iSYS 5010 indd

UserManual

Page 1 USER MANUAL iSYS-5010 Version 1.2 CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deUser Manual iSYS-5010Version 1.2 - 18.10.2016 3D-MIMO-RADAR• Area SurveilanceMovement Velocity Direction Presence Distance AnglePRODUCT FAMILYAPPLICATIONSFEATURESP »MIMO-Radar working in the 24GHz - ISM - Band »Simultaneous capturing of speed, distance and angular deviation of an object »Detection of objects up to 54m distance »Detectable radial speed: up to 34.9 km/h »FOV ±75° with an angular resolution of 16° in azimuth »Object list on SPI »UART command interface »Compact design 71 x 57 x 16.6mmand manufactured in GermanydesignedDESCRIPTIONDetection and separation of moving and stationary objects according to their Speed , Range and Azimuth angle therefore the possibility to detect an object in a 2-dimensional environment.High speed modulation concept for best signal to noise performance. Simultaneous capturing of speed, distance and angular deviation of an objectComplete signal processing included. Target list output on SPI, UARTADDITIONAL INFORMATIONInnoSenT Standard Product. Changes will not be notifi ed as long as there is no infl uence on form, fi t and within this datasheet specifi ed function of the product. CERTIFICATESInnoSenT GmbH has established and applies a quality system for: development, production and sales of radar sensors for industrial and automotive sensors. RoHS-INFOThis product is compliant to the restriction of hazardous substances (RoHS - European Union directive 2011/65/EU).
Page 2 USER MANUAL iSYS-5010 Version 1.2 CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.dePARAMETER CONDITIONS SYMBOL MIN TYP MAX UNITSRadartransmit frequencies fiSYS-5010 24.050 24.250 GHzoutput power according to ETSI 300 440 Pout_ETSI 20 dBmaccording to FCC 15.249 Pout_FCC 12.7 dBmSensordetection range depending on RCS dr1 54 mdistance error derror ±1 mdistance resolution dres 0.9 mvelocity range vr-34.9 +34.9 km/hvelocity error verror ±0.55 km/hvelocity resolution vres 0.55 km/hantenna pattern (10dB width) compare with plot on page 4 azimuth 166 °elevation 36 °angle detection ±75 °angle error within ±55° FOV ±1 °angle resolution 16 °Power supplysupply voltage VCC 6.1 6.25 6.4 Vripple Vripple 10 mVsupply current details compare to page 3 ICC 650 1000 mAEnvironmentoperating temperature TOP -40 +85 °Cstorage temperature TSTG -40 +85 °CMechanical Outlinesoutline dimensions compare to schematic on page 6heightlengthwidth16.671.057.0mmPARAMETERSThe iSYS-5010 consist of a 24GHz Radarfrontend (RFE) with DSP-Board for measuring of distance, radial velocity and angle of arrival of objects. The sensor offers an SPI, UART interface. The ouput of the sensor is a object list-
Page 3 USER MANUAL iSYS-5010 Version 1.2 CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deTRANSIENT CURRENTThe analog-frontend operates in a duty cycle mode to save energy and to avoid a strong heating of the iSYS-5010 RADAR-Sensor. TADC-ON = 40.50ms IADC-ON = typ. 685mA (@6.25V) TADC-OFF = 59.50ms IADC-OFF = typ. 527mA (@6.25V) Isupply = typ. 591mA (@6.25V)
Page 4 USER MANUAL iSYS-5010 Version 1.2 CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deANTENNA PATTERNRed graph ELEVATION ANGLE Green graph AZIMUTH ANGLE3 dB – Width [°] 20 9710 dB – Width [°] 36 166ANGLE MEASUREMENT (measurement without radom)Measurement range Resolution Error± 55 ° 16 ° ± 1.0 °± 75 ° 16 ° not specifi ed-8-4048-70 -50 -30 -10 10 30 50 70
Page 5 USER MANUAL iSYS-5010 Version 1.2 CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deINTERFACE The iSYS-5010 provides a 14 Pin 2.54 mm pitch female header. This connector is a dual entry type and is mounted on the inner side of the DSP PCB. InnoSenT uses a gold-plated connector. The length of the mating connector should be 5.5mm ± 0.5mm (e.g. W+P 3132-12-14-00-0-ST). PIN # DESCRIPTION COMMENT1 6V25_IN Power Supply, 900mA max.2 6V25_IN3 6V25_IN4 GND5 SPI_CLK SPI -> interface for object list output, CLK 5 MHz max.6 GND7 SPI_CS SPI -> interface for object list output8 GND9 SPI_MOSI SPI -> interface for object list output10 GND11 SPI_MISO SPI -> interface for object list output12 GND13 UART_RX UART -> command interface for confi guration14 UART_TX
Page 6 USER MANUAL iSYS-5010 Version 1.2 CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deMECHANICAL SCHEMATICtop viewside viewbottom viewTypecompany name Serial No.FCCIDdata matrix codeLABELING
Page 7 USER MANUAL iSYS-5010 Version 1.2 CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deAnnex AThe information that will be given below is only a rough overview; for details please contact the local approval agencies. An overview over the frequency bands in Europe can also be found in the REC 70-03 (Annex 6) which is available under www.ero.deFrequency Bands in EuropeFrequency Bands in US FCC 15.249Generally the iSYS-5010 standard version can be used for all countries in Europe. FCC approvalOperation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may causeundesired operation.Warning: Changes or modifi cations made to this equipment not expressly approved by InnoSenT GmbH may void the FCC authorization to operate this equipment.Manufacturers of mobile or fi xed devices incorporating iSYS-5010 modules are authorized to use the FCC Grants for their own fi nal products according to the conditions referenced in these documents. In this case, the FCC la-bel of the module shall be visible from the outside, or the host device shall bear a second label stating „Contains FCC ID: UXS-ISYS5010“.24.000 24.050 24.250Europe-frequency24.000 24.250US-frequency
Page 8 USER MANUAL iSYS-5010 Version 1.2 CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deAPPROVALThis Data Sheet contains the technical specifications of the described product. Changes of the specification must be in written form. All previous versions of this Data Sheet are no longer valid. VERSION DATE COMMENT1. 0 30.08.2016 initial release1. 1 28.09.2016 definition of mating connector; supply voltage set to typ. 6.25V; Transient and ESD information added1. 2 18.10.2016 adding labeling, adding frequency band US and Europe; changing in powersupply; cha-ning the length of the mating connectorInnoSenT GmbHAm Rödertor 3097499 DonnersdorfGERMANYTel.:E-Mail:URL:+49 (0)9528 - 9518 - 0info@innosent.dewww.innosent.deESD-INFORMATIONThis InnoSenT sensor is sensitive to damage from ESD. Normal precautions as usually applied to CMOS devices are sufficient when handling the device. Touching the signal output pins has to be avoided at any time before soldering or plugging the device into a motherboard.

Navigation menu