InnoSenT ISYS-5020 K.Band Transceiver User Manual

InnoSenT GmbH K.Band Transceiver Users Manual

Users Manual

Page 1 USER MANUEL iSYS-5020 Version 1.5CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deUser Manuel iSYS-5020Version 1.5 - 08.05.18 3D-MIMO-RADAR• Area SurveillanceMovement Velocity Direction Presence Distance AnglePRODUCT FAMILYAPPLICATIONSFEATURES »MIMO-Radar working in the 24GHz - ISM - Band »Simultaneous capture of speed, distance and angular deviation of a target »Detection of targets up to 150m in distance »Unambiguous velocity: 35.3 km/h »FOV ±75° with an angular resolution of <12° in azimuth »Target list on SPI and Ethernet »UART command interface »Compact design 101 x 79 x 12.4mmand manufactured in GermanydesignedDESCRIPTIONDetection and separation of moving and stationary targets according to their speed, range and azimuth angle allows the possibility to detect a target in a 2-dimensional environment.High speed modulation concept for best signal to noise performance. Simultaneous capture of speed, distance and angular deviation of a target.Complete signal processing included. Communication interface on UART. Target list output on SPI or Ethernet.ADDITIONAL INFORMATIONInnoSenT Standard Product. Changes will not be notified as long as there is no influence on form, fit and within this User Manuel specified function of the product. CERTIFICATESInnoSenT GmbH has established and applies a quality system for: development, production and sales of radar sensors for industrial and automotive sensors. RoHS-INFOThis product is compliant to the restriction of hazardous substances (RoHS - European Union directive 2011/65/EU).
Page 2 USER MANUEL iSYS-5020 Version 1.5CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.dePARAMETER CONDITIONS SYMBOL MIN TYP MAX UNITSRadartransmit frequencies fiSYS-5020 24.050 24.250 GHzoutput power according to ETSI 300 440 Pout_ETSI 20 dBmfield strength at 3 meters along theantenna azimuth according to FCC 15.249 Pout_FCC 250 mV/mSensortypical detection range person dr1120 mcar 150 mdistance error derror ±1.5 mdistance resolution dres 1.26 mvelocity range vr-34.3 +34.3 km/hvelocity error verror ±0.55 km/hvelocity resolution vres 0.55 km/hantenna pattern (10dB width) compare with plot on page 3 azimuth 150 °elevation 26 °angle detection ±75 °angle error within ±55° FOV ±1 °angle resolution 8 12 °update time 100 msPower supplysupply voltage VCC 6.1 6.25 6.4 Vripple Vripple 5 mVsupply current ICC 1000 mAEnvironmentoperating temperature with Ethernet and SPI interface1TOP -40 +70 °Cstorage temperature TSTG -40 +85 °C1 Extended temperature -40°C - +85°C with SPI only on requestMechanical Outlinesoutline dimensions compare to schematic on page 5heightlengthwidth16.5100.7578.5mmPARAMETERSThe iSYS-5020 consist of a 24GHz Radar Front End (RFE) with a DSP-Board for measure of distance, radial velocity and angle of arrival of targets. The ouput of the sensor is a target list.
Page 3 USER MANUEL iSYS-5020 Version 1.5CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deTRANSIENT CURRENTThe Analog Front End (AFE) operates in a duty cycle mode to save energy and to avoid a strong heating of the iSYS-5020 RADAR-Sensor. TADC-ON = 43.15ms IADC-ON = typ. 820mA (@6.25V) TADC-OFF = 56.85ms IADC-OFF = typ. 640mA (@6.25V) Isupply = typ. 720mA (@6.25V)
Page 4 USER MANUEL iSYS-5020 Version 1.5CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deANTENNA PATTERN
Page 5 USER MANUEL iSYS-5020 Version 1.5CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deINTERFACE The iSYS-5020 provides a 14 Pin 2.54 mm pitch female header. This connector (W+P 3492-14-3- 00-00) is a dual entry type and is mounted on the inner side of the DSP-board. InnoSenT uses a gold-plated connector. The length of the mating connector should be 5.32mm ± 0.5mm (e.g. W+P3132-12-14-00-0-ST). PIN # DESCRIPTION COMMENT1 6.25V_IN •Power Supply, 1000mA max.2 GND •3 6.25V_IN •4 GND •5 SPI_CLK SPI -> default interface for target list output, CLK 5 MHz max.6 ETH_EXT.TPIA_P Ethernet -> secondary interface for target list output, 100 Mbit/s7 SPI_CS SPI -> default interface for target list output8 ETH_EXT.TPIA_N Ethernet -> secondary interface for target list output9 SPI_MOSI SPI -> default interface for target list output10 ETH_EXT.TPIB_P Ethernet -> secondary interface for target list output,11 SPI_MISO SPI -> default interface for target list output12 ETH_EXT.TPIB_N Ethernet -> secondary interface for target list output, 100 Mbit/s13 UART_RX UART -> command interface for configuration (3.3 V)14 UART_TX
Page 6 USER MANUEL iSYS-5020 Version 1.5CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.de101.8 ±0.3R1.5 (4x)76.75 ±0.323.251.1antenna centroidrotational pivot12.4 ±0.311.5 ±0.214.5 ±0.370 ±0.295 ±0.23.3 (4x)9.5 ±51 ±1Label content:DataMatrixCodeModel: iSYS-5020FCC: UXS-ISYS-5020Canada 310InnoSenTSN: 8-digitMECHANICAL DRAWINGtop view side viewbottom view101.8 ±0.3R1.5 (4x)76.75 ±0.323.251.1antenna centroidrotational pivot12.4 ±0.311.5 ±0.214.5 ±0.370 ±0.295 ±0.23.3 (4x)9.5 ±51 ±1Label content:DataMatrixCodeModel: iSYS-5020FCC: UXS-ISYS-5020Canada 310InnoSenTSN: 8-digit101.8 ±0.3R1.5 (4x)76.75 ±0.323.251.1antenna centroidrotational pivot12.4 ±0.311.5 ±0.214.5 ±0.370 ±0.295 ±0.23.3 (4x)9.5 ±51 ±1Label content:DataMatrixCodeModel: iSYS-5020FCC: UXS-ISYS-5020Canada 310InnoSenTSN: 8-digitCAUTIONTHIS SIDE UPThe module must be installed with this side up
Page 7 USER MANUEL iSYS-5020 Version 1.5CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deTypecompany name Serial No.FCCID data matrix codeLABELINGAnnex AThe information that will be given below is only a rough overview; for details please contact the local approval agencies. An overview over the frequency bands in Europe can also be found in the REC 70-03 (Annex 6) which is available under www.ero.dkFrequency Bands in EuropeGenerally the iSYS-5020 standard version can be used for all countries in Europe except UK.24.000 24.050 24.250Europe-frequency
Page 8 USER MANUEL iSYS-5020 Version 1.5CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deFrequency Bands in US FCC 15.249FCC approvalThis device complies with Part 15 of the FCC Rules and with RSS-310 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may causeundesired operation.Warning: Changes or modifications made to this equipment not expressly approved by InnoSenT GmbH may void the FCC authorization to operate this equipment.Manufacturers of mobile or fixed devices incorporating iSYS-5020 modules are authorized to use the FCC Grants for their own final products according to the conditions referenced in these documents. In this case, the FCC la-bel of the module shall be visible from the outside, or the host device shall bear a second label stating „Contains FCC ID: UXS-ISYS-5020“.Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de licence. L‘exploitation est autorisée aux deux conditions suivantes:(1) l‘appareil ne doit pas produire de brouillage, et(2) l‘utilisateur de l‘appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est suscep-tible d’en compromettre le fonctionnement.NOTICE:Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void theFCC authorization to operate this equipment.24.000 24.250US-frequencyESD-INFORMATIONThis InnoSenT sensor is sensitive to damage from ESD. Normal precautions as usually applied to CMOS devices are sufficient when handling the device. Touching the signal output pins has to be avoided at any time before soldering or plugging the device into a motherboard.
Page 9 USER MANUEL iSYS-5020 Version 1.5CONFIDENTIAL AND PROPRIETARYThe information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing.Experience and Reliability in Radar Technologywww.InnoSenT.deAPPROVALThis User Manuel contains the technical specifications of the described product. Changes of the specification must be in written form. All previous versions of this User Manuel are no longer valid. VERSION DATE COMMENT1. 0 21.12.2017 initial release1. 1 10.01.2018 adding in mechanical drawing 1. 2 20.04.2018 changing in mechanic; adding labeling; adding Annex A; adding Frequency Bands in Europe; adding Frequency Bands in US FCC 15.2491. 3 24.04.2018changing in mechanic; adding labeling; adding in command interface; adding in output power; adding in detection range; changing in distance error; changing in angle error; adding transient current1. 4 07.05.2018 changing in install information1. 5 08.05.2018 changing in operating temperatureInnoSenT GmbHAm Rödertor 3097499 DonnersdorfGERMANYTel.:E-Mail:URL:+49 (0)9528 - 9518 - 0info@innosent.dewww.innosent.de

Navigation menu