InnoSenT IPM224F Doppler Radar Module User Manual 110913 IPM 224 F V1 indd

InnoSenT GmbH Doppler Radar Module 110913 IPM 224 F V1 indd

Installation Manual

InnoSenT sets standards – worldwidePage 1 Version 1.0 USER MANUAL IPM-224_FCONFIDENTIAL AND PROPRIETARYThe informaon contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third pares without prior consent of InnoSenT in wring.User Manual IPM-224_F Version 1.0 - 13.09.2011The IPM-224_F is a K-Band Transceiver with a split transmit and receive antenna.This product is compliant to the restricon of hazardous substances (RoHS - European Union direcve 2002/95/EG)Features: »radar-based moon detector »the IPM-224_F is designed for the US and Canadian market »advanced PHEMT-oscillator with low current consumpon »IF-pre-amplier, bandwidth limited for lowest noise performance »compact outline dimensionsProduct Family ApplicaonsK-Band TransceiverLightning ApplicaonsMovement Velocity Direcon Presence Distance AngleDescripon CercatesInnoSenT GmbH has established and applies a quality system for: development, produc-on and sales of radar sensors for industrial and automove sensors.and manufactured in Germanydesigned
InnoSenT sets standards – worldwidePage 2 Version 1.0 USER MANUAL IPM-224_FOscillatortransmit frequencies fFCC 24.075 24.175 GHz IPM-224_Ftemperature dri (frequency) Δf -1 MHz/°Coutput power (EIRP) Pout 6 11 20 dBm @ 25°CReceiverIF-output voltage oset 1.0 2.2 4.0 VIF-amplier bandwidth DC - 10k Hzgain 20 dBsignal level S29 mV @ InnoSenT test setupnoise level R57 mV @ InnoSenT test setupS/N rao S/N 6@ InnoSenT test setupESD stability 12 kV according to DIN EN 6100-4-2Antenna paernfull beam width @ -3dB horizontal 70 ° azimuthvercal 70 ° elevaonfull beam width @ -10dB horizontal 135 ° azimuthvercal 135 ° elevaonside-lobe suppression horizontal 10 dB azimuthvertical 10 dB elevaonPower supplysupply voltage VCC 4.75 5.0 5.25 Vsupply current ICC 35 40 mA IF-amp includedEnvironmentoperang temperature TOP 0+23 +60 °CMechanical Outlinesoutline dimensionsheightlengthwidth6.840.023.5mmElectrical CharacteriscsParameter Symbol Min. Typ. Max. Units CommentCONFIDENTIAL AND PROPRIETARYThe informaon contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third pares without prior consent of InnoSenT in wring.
InnoSenT sets standards – worldwidePage 3 Version 1.0 USER MANUAL IPM-224_FInterface1not connected2not connected3VCC input supply voltage4 GND input analog ground5IF1 output signal 16not connectedPin # Descripon In / Out CommentCONFIDENTIAL AND PROPRIETARYThe informaon contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third pares without prior consent of InnoSenT in wring.Mechanical Outlinesazimuth3D-ViewPIN 1The sensor provides a 6 pin JST connector (06FMN-BMT-A-TF, SMD, vercal)
InnoSenT sets standards – worldwidePage 4 Version 1.0 USER MANUAL IPM-224_FInnoSenT GmbHAm Rödertor 3097499 DonnersdorfGERMANYContact InformaonInnoSenT GmbH | Am Roedertor 30 | 97499 Donnersdorf | GermanyPhone: +49 (0) 9528-9518-0 | Fax: +49 (0) 9528-9518-99 | E-Mail: info@innosent.dewww.innosent.deApprovalFCC approvalLabelingThis Data Sheet contains the technical specicaons of the described product. Changes of the specicaon must be in wrien form. All previous versions of this Data Sheet are no longer valid.The technical specicaons of this Data Sheet are approved by:The adhesive label on the cover of the sensor provides the following informaon:FCC/IC-IDserial numberversion (K01 / K02)last 3digits of the tramsmit frequency(e.g. 24.125GHz = 125)This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.Operaon is subject to the following two condions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon.Warning: Changes or modicaons made to this equipment not expressly approved by InnoSenT GmbH may void the FCC authorizaon to operate this equipment.Manufacturers of mobile or xed devices incorporang IPM-224_F modules are authorized to use the FCC Grants and IC Cercates of the IPM-224_F modules for their own nal products according to the condions referenced in these documents. In this case, the FCC label of the module shall be visible from the outside, or the host device shall bear a second label stang contains FCC ID: UXS-IPM224F and contains IC: 6902A-IPM224F.model number

Navigation menu