Inkel IK-CSRBC05 Bluetooth module User Manual Label locationx

Inkel Corporation Bluetooth module Label locationx

Users Manual

[IK-CSRBC05] Bluetooth Module for AudioOEM / Integrators Installation Manual
Device OverviewDimensions 28mm44mm
DMAIN B'DBLUETOOTH B'D AntennaDMAINBD
IK‐CSRBC05VNH‐IK‐CSRBC05VNH‐IK‐CSRBC05This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users, and The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID:VNH-IK-CSRBC05”, “contains IC: 10581A-IKCSRBC05”. The grantee's FCC ID can be used only when all FCC/ IC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The Grantee must instruct the OEM/Integrator to include statements as required per Parts 15.19 and 15.21. An attestation that the Grantee will provide guidance to the host manufacturer for compliance to Part 15, subpart B requirements. The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirement.
10581A‐IKCSRBC05IK‐CSRBC05

Navigation menu