Identiv TSKP-02 uTrust TS Network Keypad Reader User Manual

Identiv, Inc uTrust TS Network Keypad Reader Users Manual

Users Manual

User manualForuTrust TS KEYPADVersion 1.0ConfidentialAuthorSuresh Kumar TVersion1.0Date08-May-2015
Document HistoryVersionDateDescription of ChangeAuthor1.008-May-15Initial versionSuresh Kumar T
uTrust TS KEYPAD User ManualPage 3 of 12Contents1.0 Introduction ................................................................................................................................ 42.0 Reader .........................................................................................................................................42.1 Functionality.............................................................................................................................. 42.2 Front/Top Casing......................................................................................................................42.3 Back View/plate ........................................................................................................................ 53.0 Product details ...........................................................................................................................64.0 Specifications ............................................................................................................................. 65.0 Label ............................................................................................................................................66.0 Installation details......................................................................................................................76.1 Parts List................................................................................................................................... 76.2 Recommended Infrastructure ................................................................................................... 76.3 Connector Information .............................................................................................................. 76.3.1 Pinout diagram .................................................................................................................. 76.4 Mounting the Reader ................................................................................................................ 96.4.1 Location of mounting holes on wall ................................................................................... 96.4.2 Reader Installation Steps ..................................................................................................97.0 Power up and Testing..............................................................................................................118.0 Certifications ............................................................................................................................128.1 FCC.........................................................................................................................................128.2 IC ............................................................................................................................................12
uTrust TS KEYPAD User ManualPage 4 of 121.0 IntroductionThis document details the Physical Access Control Reader uTrust TS KEYPAD and its basic userinstruction and installation procedures.2.0 Reader2.1 FunctionalityTS KEYPAD reader is a physical access control smart card reader that can read HF and LFcontactless credentials, conforming to the following standards: ISO 14443 A & B, ISO15693 with akeypad pin entry for additional security. The reader can interface with an access control systemequipped with a Wiegand or RS485 serial interface. It can also be interfaced with a Host Sever /Control Panel that supports Ethernet interface. User interfaces include RGB LED’s and Buzzer.2.2 Front/Top Casing
uTrust TS KEYPAD User ManualPage 5 of 122.3 Back View/plateStandard versionConnectivity & Standard version Back plate
uTrust TS KEYPAD User ManualPage 6 of 123.0 Product detailsModel Name : uTrust TS keypadDevice Type : RFID reader, 13.56MHz (HF) / 125 KHz (LF), keypadPhysical Access control Reader (accessory equipment)Type of equipment : Potted Reader, Suitable for Indoor / Controlled Outdoor useInterface Type : Phoenix connectors and RJ45Voltage Rating : 5-16V DC (or) 48V DC on RJ45 ConnectorCurrent Rating @12V : Peak Current – 255 mA, Average Current 180 mACommunication protocol : Wiegand, RS485 (2wire - Half Duplex), 10BaseT ETH4.0 SpecificationsModelOp VoltageCurrent @ 12VOp tempCable Length8230uTrust TSKEYPAD5-16 VDC orPOE@ 48VDCAv -180 mAPk -255 mA(-35 to 65 Deg C)RS485 - 4000ftWiegand -500ft (22AWG)300ft (24AWG)5.0 LabelCaution:During Wiring make sure that the +VDC lines does not make contact with any other cables, as it mightaffect reader functionality/ cause damage to the reader.
uTrust TS KEYPAD User ManualPage 7 of 126.0 Installation details6.1 Parts List•TS Keypad reader -1•Screws (A #6-18X1.5" SS ) - 4Nos – Back Plate mounting screws for Wall•Snake Eye Screw (SMF #6-32X5/16" SS) – 1 No- Top casing mounting security screw•Screws (SMF #6-32x3/8" SS) - 3 No’s - 1 casing to back plate mounting screw and 2 JunctionBox mounting screws•Nylon anchor plug -4 Nos•6 pin phoenix plug (Phoenix connector version only) – 2 Nos•Back Plate6.2 Recommended Infrastructure•Cable Wiegand - 22AWG for 500Ft / 24AWG for 300Ft with Foil Shield•Cable RS485 - RS485 for 1000m** (4000ft) 24AWG STP•Cable RJ45 - Cat5e / Cat6•Linear DC PS - 5-16 V, 1A min.•POE Adaptor Kit - TL-POE200A** Tested in lab conditions upto 115Kbaud6.3 Connector Information6.3.1 Pinout diagram
uTrust TS KEYPAD User ManualPage 8 of 12Caution:During Wiring make sure that the +VDC lines does not make contact with any other cables, as it mightaffect reader functionality/ cause damage to the reader.
uTrust TS KEYPAD User ManualPage 9 of 126.4 Mounting the Reader6.4.1 Location of mounting holes on wallPhoenix connector Reader – 4 Holes and 1 Slot6.4.2 Reader Installation Stepsa. Make holes on the wall as per the image above.b. Insert the nylon screw plugs into the wall.c. Connect the wires as per the Table 2 or Table 3.d. TouchSecure® reader with Bottom Casing is to be now secured onto the wall using theScrews (A #6-18X1.5" SS )e. The top casing can be inserted onto the bottom casingf. Secure the Top and bottom casing by the Snake Eye Screw (SMF #6-32X5/16" SS)
uTrust TS KEYPAD User ManualPage 10 of 12
uTrust TS KEYPAD User ManualPage 11 of 127.0 Power up and Testing1Turn power onThe LED blinks 3 times green with a long beep, then turns red2Present a cardThe LED blinks green, and a short Beep is emitted3Press KeyBuzzer tone & backlight LED blinks4RJ45 Ethernet cableReader can be powered from POE. Communication happens through Ethernet also.5Wiegand / RS485Communication to the Panel is done through Wiegand / RS485 / OSDP.This is the default reader behavior.
uTrust TS KEYPAD User ManualPage 12 of 128.0 Certifications8.1 FCCThis device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may causeundesired operationThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipmentgenerates uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.—Consult the dealer or an experienced radio/TV technician for help.Information to userChanges or modifications not expressly approved by Identiv could void the user's authority to operatethe equipment.8.2 ICThis device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions:(1) This device may not cause interference(2) This device must accept any interference, including interference that may causeundesired operation of the device.

Navigation menu