user manual
PAC2111 Operation / Installation Manual
Ver1.1
PAC2111 Operation / Installation Manual
IDT
.QM.P
2
.T1.DT
VER
1.1
Page
2
of
9
Printed copies of this document are uncontrolled
Internal Use Only
Version History
Date
Version
Description of Changes
Author
16-Apr-12 1.0 Initial Sixtus
05-June-12 1.1 Added Industrial Canada – Class B statement Murugesh
PAC2111 Operation / Installation Manual
IDT
.QM.P
2
.T1.DT
VER
1.1
Page
3
of
9
Printed copies of this document are uncontrolled
Internal Use Only
Contents
1.0 Introduction ........................................................................................................................... 4
2.0 Reader ................................................................................................................................... 4
2.1. Functionality ............................................................................................................................ 4
2.2 Top Casing .......................................................................................................................... 4
2.3 Bottom Casing –Potted reader with Pigtail Cable ................................................................. 5
3.0 Product details ...................................................................................................................... 5
4.0 Installation details ................................................................................................................. 5
4.1 Parts Included ..................................................................................................................... 5
4.2 Recommended Infrastructure ............................................................................................... 6
4.3 Specifications ...................................................................................................................... 6
4.4 Wiring Information ............................................................................................................... 6
4.5 Mounting the Reader ........................................................................................................... 7
4.6 Power up ad Testing ............................................................................................................ 7
5.0 Certifications ......................................................................................................................... 8
5.1 CE Marking ......................................................................................................................... 8
5.2 IC Marking ........................................................................................................................... 8
5.3 FCC Marking ....................................................................................................................... 8
6.0 Product label ......................................................................................................................... 9
PAC2111 Operation / Installation Manual
IDT
.QM.P
2
.T1.DT
VER
1.1
Page
4
of
9
Printed copies of this document are uncontrolled
Internal Use Only
1.0 Introduction
This document details the Physical Access Control Smart card reader PAC2111 and the installation
procedures.
2.0 Reader
2.1. Functionality
PAC2111 reader is a physical access control smart card reader that can read HF contactless cards,
conform to the following standards: ISO 14443 A & B, ISO15693. The reader can interface with an
access control system equipped with a Wiegand or RS485 serial interface
The reader consists of the following parts.
2.2 Top Casing
PAC2111 Operation / Installation Manual
IDT
.QM.P
2
.T1.DT
VER
1.1
Page
5
of
9
Printed copies of this document are uncontrolled
Internal Use Only
2.3 Bottom Casing –Potted reader with Pigtail Cable
Fig : Top side of Bottom casing Bottom side of Bottom casing
3.0 Product details
Model Name : PAC2111
Device Type : RFID reader, 13.56MHz (HF)
Physical Access control Reader (accessory equipment)
Type of equipment : Outdoor use, potted reader, Wall mounted
Cable Type : Pigtail Cable , 11 Core + Drain wire.
Rating : 5-16V DC (Low voltage)
; Pk Current – 200mA. , Average Current 130mA
Communication protocol : Wiegand, RS485 (2 wire- Half Duplex).
4.0 Installation details
4.1 Parts Included
PAC2111 reader -1(2 piece plastic ie Top casing and Potted Bottom casing with Pigtail cable)
Steel Screw -1 (PH #3x8) – Top casing screw
Steel Screws -2 (#4-24x3/4")
Nylon Anchor Plug – 2
PAC2111 Operation / Installation Manual
IDT
.QM.P
2
.T1.DT
VER
1.1
Page
6
of
9
Printed copies of this document are uncontrolled
Internal Use Only
4.2 Recommended Infrastructure
Wiegand cable ( 11 core** + Drain , 22AWG for 500Ft or 24AWG for 300Ft )
Linear DC power Supply 5-16 V, 1A min.
** Note: The number of cores on the cable can vary depending on the actual field requirement. On a
minimum 6 Cores + Drain is recommended (Power 2, Wiegand outputs -2, Wiegand Inputs- 2)
4.3 Specifications
Model Number Op Voltage Current Op temp Cable Length
PAC2111 5-16 V Dc Av -130mA
Pk -200mA -35 to +70Deg C
RS485 - 4000Ft
Wiegand -500ft (22AWG)
300ft (24AWG)
4.4 Wiring Information
Pig Tail Cable Color
Function
RED + VDC
Black GND
Green Wiegand output D0
White Wiegand output D1
Orange Wiegand Green LED Input
Yellow Wiegand Buzz Input
Blue Input2
Brown Input1
Grey RS485 -
Pink RS485 +
Violet Tamper Output
Black Shrink Tube Drain Wire
Caution:
During Wiring make sure that the +VDC lines does not make contact with any other cables, as it might
affect reader functionality/ cause damage to the reader.
PAC2111 Operation / Installation Manual
IDT
.QM.P
2
.T1.DT
VER
1.1
Page
7
of
9
Printed copies of this document are uncontrolled
Internal Use Only
4.5 Mounting the Reader
a. Make two holes on the wall at a vertical distance 80 mm apart to match with the mounting
holes on the Bottom casing.
b. Insert the nylon screw plugs into the wall.
c. Connect the wires on the pigtail cable to the corresponding wires in the cable from the wall.
d. The Bottom casing which is potted is to be now secured onto the wall using the screws
supplied. Once the bottom unit is secured onto the wall, the top casing can be inserted onto
the bottom casing. Ensure that the LED opening on the top casing is aligned with the LED in
the bottom casing.
e. Secure the Top and bottom casing by the #3x8 screw at the slot on the lower side of Top
casing.
4.6 Power up ad Testing
a. Power Up the reader by connecting the DC power supply at the other end of the cable.
b. The reader beeps long once and blinks red for approximately 30 secs.
c. After this the LED glows RED .
d. Now the reader is in the functional mode.
e. Flash a contactless card on the reader top surface. The LED will blink Green and then turn
back to Red, to indicate that the card is detected**.
f. The buzzer will make a short Beep to indicate that the card is detected**.
** This behavior is the default reader behavior. This may vary depending on the feedback
available from the control panel on LED (orange wire) and Buzzer Input Lines (Yellow wire).
PAC2111 Operation / Installation Manual
IDT
.QM.P
2
.T1.DT
VER
1.1
Page
8
of
9
Printed copies of this document are uncontrolled
Internal Use Only
5.0 Certifications
5.1 CE Marking
Identive hereby declares that the PAC2111 devices mentioned herein are in compliance with
the essential requirements and other relevant portions of the Directive R&TTE 1999/5/EC.
5.2 IC Marking
The Industry Canada device ID is IC : 7485A-PAC2111R2
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
5.3 FCC Marking
Labeling requirements
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Information to user:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
FCC ID – MBPPAC21X1-002
PAC2111 Operation / Installation Manual
IDT
.QM.P
2
.T1.DT
VER
1.1
Page
9
of
9
Printed copies of this document are uncontrolled
Internal Use Only
6.0 Product label