Identiv CLOUD47X0F-001 Dual Interface Reader User Manual Manual

Identiv, Inc Dual Interface Reader Manual

Contents

Manual

Identive Cloud 47X0F – User Manual - CONFIDENTIAL Version: 0.0 Page 1 of 4 User manual For Identive Cloud 47X0F Version 0.0 Confidential Author Sudhan Version 0.0 Date 11-December-2012
Identive Cloud 47X0F – User Manual - CONFIDENTIAL Version: 0.0 Page 2 of 4 Document History Version Date Description of Change Author 0.0 11-December-2012 Initial version Sudhan
Identive Cloud 47X0F – User Manual - CONFIDENTIAL Version: 0.0 Page 3 of 4 Table of Contents 1 Scope of the document ..................................................................................................... 4 2 About Identive Cloud 47x0 reader ..................................................................................... 4 3 Driver Installation in Windows ........................................................................................... 4 4 Communication with Card ................................................................................................. 4
Identive Cloud 47X0F – User Manual - CONFIDENTIAL Version: 0.0 Page 4 of 4 1 Scope of the document The user manual specifies the basic application of the reader by the customer. 2 About Identive Cloud 47x0 reader Identive Cloud 47x0 is a USB based dual interface reader capable of reading ISO7816 Contact smart cards and ISO14443 Contactless cards. The reader has a bicolor LED for status indication and connects to a host PC via USB2.0 Full speed interface. The reader comes in 2 flavors,  Identive Cloud 4700F - Dual Interface reader  Identive Cloud 4710F - Contactless+SAM reader 3 Driver Installation in Windows Follow the sequence of steps to install the driver,  Plug in the reader to a Windows PC  The PC prompts for a driver  Select Microsoft CCID driver and install the driver  The device enumerates with Identive VID and PID strings 4 Communication with Card Follow the sequence of steps to communicate with the contact card,  Plug in the reader to a Windows PC and load the driver  Insert the contact card into the card reader slot of the reader  Check the status indication of the LED changing from a steady GREEN glow to a blinking GREEN LED status Follow the sequence of steps to communicate with the contactless card,  Plug in the reader to a Windows PC and load the driver  Place a contactless card on top of the reader  Check the status indication of the LED changing from a steady GREEN glow to a steady AMBER LED status  If both Contact and Contactless cards are in the field the status indication of the LED changes from a steady GREEN glow to a blinking AMBER LED status

Navigation menu