IPICO Australia 3271-1 High Performance UHF fixed reader User Manual Exhibit 8b

IPICO Australia High Performance UHF fixed reader Exhibit 8b

Contents

Exhibit 8b

EXHIBIT 8 - UHF RFID READER USER MANUAL 109 AMENDMENT 1 PAGE 1 OF 2 EXHIBIT 8: USER MANUAL –AMENDMENT 1 High Performance UHF fixed reader
EXHIBIT 8 - UHF RFID READER USER MANUAL 109 AMENDMENT 1 PAGE 2 OF 2 The following new paragraph will be added to the user’s manual of the Model IP3271 at the next printing and will be applicable to: · FCC ID Number VHY3271-1 · FCC ID Number VHY3271-2 · FCC ID Number VHY3271-3 Warning: Exposure To Radio Frequency (RF) Radiation ● The radiated output of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized. ● The end user must avoid any extended human RF exposure directly in front of the UHF Reader, up to a distance of 30 cm, when unit is switched on. ● When servicing the equipment and selecting a location for the antennas, it is important to note that a minimum distance of 30 cm is required between personnel and the IPICO antennas to comply with the radio frequency exposure limit. ● The antenna used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. ● The following safety precautions should be observed: - Do not touch or move the antenna while the unit is transmitting or receiving. - Do not hold any component containing the radio such that the antenna is very close or Touching any exposed parts of the body, especially the face or eyes, while transmitting. - Do not operate the radio or attempt to transmit data unless the antenna is connected; this behaviour may cause damage to the radio.

Navigation menu