IDT Technology THGR122NX-01 Remote Thermo Hygro Sensor User Manual RMR613HGA lab test R3

IDT Technology Limited Remote Thermo Hygro Sensor RMR613HGA lab test R3

User Manual

Wireless Acyrlic Thermo-Hygrometer &Atomic Alarm ClockModel : RMR613HGAUser ManualRMR613HGA lab test cover R3 2/10/04, 3:38 PM1
EN1CONTENTSContents ................................................................... 1Introduction .............................................................. 2About Oregon Scientific .......................................... 2Product Overview .................................................... 3Front View .............................................................. 3Back View .............................................................. 4Remote Sensor (THGR122NX) ............................. 5Getting Started ......................................................... 6Batteries ................................................................. 6Change Settings .................................................... 6Table Stand ............................................................ 6Remote Sensor (THGR122NX) ................................ 6Setup Sensor ......................................................... 6Data Transmission ................................................. 7Search for Sensor .................................................. 8Clock ......................................................................... 8Turn Atomic Clock ON/OFF ................................... 9Set Clock ............................................................... 9Switch Clock Display ............................................. 9Alarms ....................................................................... 9View Alarm Settings ............................................... 9Set Alarm ............................................................... 9Activate Alarm ...................................................... 10Silence Alarm ....................................................... 10Temperature and Humidity .................................... 10Select Temperature Unit ...................................... 10Select Sensor Channel ........................................ 10Minimum / Maximum Records ............................. 11Comfort Zone ....................................................... 11Reset System ......................................................... 11Safety and Care ...................................................... 12Warnings ................................................................. 12Troubleshooting ..................................................... 12Specifications ......................................................... 13Main Unit Dimensions .......................................... 13Remote Sensor Dimensions ................................ 13Temperature ......................................................... 13Relative Humidity ................................................. 13Remote Sensor (THGR122NX) ........................... 13Clock .................................................................... 13Power ................................................................... 14FCC Statement ....................................................... 14RMR613HGA lab test R3 2/18/04, 2:22 PM1
EN2INTRODUCTIONThank you for selecting the Oregon ScientificTM WirelessAcyrlic Thermo-Hygrometer & Atomic Alarm Clock(RMR613HGA). This device bundles precise timekeeping, dual alarm, and temperature and humiditymonitoring features into a single tool you can use fromthe convenience of your home.In this box, you will find:•Main unit•Remote sensor (THGR122NX)Keep this manual handy as you use your new product.It contains practical step-by-step instructions, as wellas technical specifications and warnings you shouldknow.ABOUT OREGON SCIENTIFICVisit our website (www.oregonscientific.com) to learnmore about other Oregon Scientific products such asdigital cameras, hand-held organizers, health and fitnessgear, and projection clocks. The website also includescontact information for our customer service department,in case you need to reach us.RMR613HGA lab test R3 2/18/04, 2:22 PM2
EN3PRODUCT OVERVIEWFRONT VIEW1. Clock / Alarm Area: Date, time, dual alarm; andAtomic Clock reception status2. Temperature Area: Readings; sensor channelnumber; remote unit reception and battery status3. Humidity / Comfort Zone Area: Readings, comfortzone and battery status.4. Channel button: switch remote sensor5. Alarm button: view alarm status; set alarm1234 5RMR613HGA lab test R3 2/18/04, 2:22 PM3
EN4BACK VIEW1. MEM: view current, maximum, and minimumtemperature / humidity readings2. DOWN: decrease setting / deactivate radio-controlled clock / activate or deactivate alarm3. UP: increase setting / activate radio-controlled clock /activate or deactivate alarm4. MODE: change display / settings5. Battery compartment6. °C / °F switch7. RESET hole34125, 6, 7RMR613HGA lab test R3 2/18/04, 2:22 PM4
EN5REMOTE SENSOR (THGR122NX)1. LCD display2. LED Status indicator1212341. Wall mount hole2. RESET3. Channel number (1 - 3)4. Battery compartment(Battery compartment cover not shown)RMR613HGA lab test R3 2/18/04, 2:22 PM5
EN6CHANGE SETTINGS1. Press and hold MODE for 2 seconds to enter settingmode.2. Press UP or DOWN to change settings.3. Press MODE to confirm.REMOTE SENSOR (THGR122NX)This product is shipped with a THGR122NX Thermo/Hygro Sensor that collects Temperature and Humiditydata. Data can be collected from up to 3 sensors.Additional sensors sold separately.SETUP SENSOROpen the remote sensor battery compartment with asmall Phillips screwdriver.GETTING STARTEDBATTERIESBatteries are not supplied with this product. You will needto purchase 2 x UM-3 (AA) 1.5V alkaline batteries forthe main unit, and 2 x UM-4 (AAA) 1.5V alkaline batteriesfor the remote sensor.Insert the batteries before first use, matching the polarityas shown in the battery compartment. For best results,install batteries in the remote sensor before the mainunit. Press RESET after each battery change.Do not use rechargeable batteries.NOTEUNIT LOCATIONMainTemperature Area whenthe INDOOR temperatureis shown.Remote Temperature Area when theOUTDOOR temperature isshown. shows when batteries are low.RMR613HGA lab test R3 2/18/04, 2:22 PM6
EN73. Place the sensor near the main unit. Press RESETon the sensor to initiate signal sending between thesensor and the main unit. The reception icon onthe main unit will blink for approximately 3 minuteswhile it is searching for the sensor. (Refer to theSearch for Sensor section for more information.)4. Close the remote sensor battery compartment.5. Secure the sensor in the desired location using thewall mount or table stand.1. Insert the batteries, matching the polarity as shownin the battery compartment.2. Set the channel. The switch is located in the batterycompartment.SWITCH OPTIONChannel Channel 1 - 3. If you are usingmore than one sensor, select adifferent channel for each sensor.For best results:•Insert the batteries and select the channel andtemperature unit before you mount the sensor.•Place the sensor out of direct sunlight andmoisture.•Do not place the sensor more than 30 meters(98 feet) from the main (indoor) unit.•Position the sensor so that it faces the main(indoor) unit, minimizing obstructions such asdoors, walls, and furniture.•Place the sensor in a location with a clear viewto the sky, away from metallic or electronicobjects.•Position the sensor close to the main unit duringcold winter months as below-freezingtemperatures may affect battery performanceand signal transmission.You may need to experiment with various locations toget the best results.DATA TRANSMISSIONData is sent from the sensor(s) every 40 seconds.The reception icon shown in the Temperature andHumidity Areas show the status.RMR613HGA lab test R3 2/18/04, 2:22 PM7
EN8SEARCH FOR SENSORTo search for a sensor, press and hold MEM andCHANNEL for 2 seconds.If the sensor is still not found, check thebatteries, obstructions, and remote unit location.Signals from household devices such asdoorbells, electronic garage doors, and home securitysystems may cause temporary reception failure. This isnormal and does not affect general product performance.The reception will resume once the interference ends.NOTE--- shows in Temp/ Humidity AreasICON DESCRIPTIONMain unit is searching forsensors.At least 1 channel hasbeen found.Channel 1 is selected(number will changedepending on the sensoryou select)The selected sensor cannotbe found. Search for thesensor or check batteries.NOTECLOCKThis product can track the date and time for up to2 locations (Clock with Offset Hour). The US AtomicClock in Boulder, Colorado automatically updates thisinformation unless you disable the feature. The signalsare collected by the main unit when it is within 1500 km(932 miles) of a signal.Initial reception takes 2 - 10 minutes, and is initiatedwhen you first setup the unit, and whenever you pressRESET. Once complete, the reception icon will stopblinking. The icon is shown in the Clock Area.To force a manual search for Atomic Clock signals, pressand hold UP for 2 seconds. If no signal is found, checkthe batteries.If the Atomic Clock signal is received and thehour is incorrect, use the "hour offset" feature to adjustit to to the right value. Please see "SET CLOCK" onpg. 9 for instructions.NOTERMR613HGA lab test R3 2/18/04, 2:22 PM8
EN9TURN ATOMIC CLOCK ON/OFFPerform this step if you cannot receive Atomic Clocksignals. Press and hold DOWN for 2 seconds. Then,manually set the clock following the “Set Clock”instructions (below).SET CLOCKYou only need to do this if you have disabled the AtomicClock feature (for example, if you are too far from orcannot receive a signal).1. Press and hold MODE for 2 seconds. The ClockArea will blink.2. Select the offset hour, 12 / 24 hour format, hour,minute, year, month, day, and language. Press UPor DOWN to change the setting. Press MODE toconfirm.The language options are (E) English,(F) French, (D) German, (I) Italian, and (S) Spanish.The signal icon indicates that the Atomic Clockfeature is ON. No icon means that it is OFFSWITCH CLOCK DISPLAYPress MODE to toggle between Clock with Seconds,Clock with Weekday and Calendar, and Clock with OffsetHour display.ALARMSThis product has 2 alarms: a Single Alarm and a WeekdayAlarm. The Single Alarm can be set to go off at a specifictime for a one-time event (for example, if you are nappingon Saturday). The Weekday Alarm will sound at the sametime Monday - Friday (but not on weekends).VIEW ALARM SETTINGSPress ALARM to display the Alarm settings you wish toview: Weekday W or Single S.SET ALARM1. Press ALARM to display the type of Alarm you wishto set: Weekday or Single.2. Press and hold ALARM for 2 seconds. The Alarmsettings will blink.3. Select the hour and minute. Press UP or DOWN tochange settings. Press ALARM to confirm.NOTERMR613HGA lab test R3 2/18/04, 2:22 PM9
EN10ACTIVATE ALARMPress ALARM to switch to Weekday or Single Alarm view.To activate or deactivate the alarm, press UP or DOWN.•Alarm deactivated: --:--•Alarm activated: Alarm time is shownThe bell icons W and S indicate the alarm displaymode selected.SILENCE ALARMWhen the Alarm time is reached, the crescendo alarmwill sound for 2 minutes. Press ALARM to silence it.The Weekday Alarm will sound at the same time thenext day provided the next day is Monday - Friday. TheSingle Alarm will not sound unless you manually activateit again.TEMPERATURE AND HUMIDITYThis product can display the following information fromthe remote sensors:VIEW BAROMETER AREA•Current, minimum, and maximum temperaturesand relative humidity percentages.•Comfort levelData is collected and displayed every 40 seconds.SELECT TEMPERATURE UNITSlide the °C / °F switch into the desired location. Theswitch is located in the battery compartment. The settingfor the main unit overrides the remote sensor setting.SELECT SENSOR CHANNELPress CHANNEL to switch between sensors 1 - 3.The icon shows the selected sensor.RMR613HGA lab test R3 2/18/04, 2:22 PM10
EN11To auto-scan between sensors, press and holdCHANNEL for 2 seconds. Each sensor's data will bedisplayed for 3 seconds. To end auto-scan, pressCHANNEL or MEM.If you use a sensor that collects onlytemperature data, humidity will not be shown.MINIMUM / MAXIMUM RECORDSPress MEM to toggle between current, maximum (MAX)and minimum (MIN) records for the selected sensor. Toclear the records, press and hold MEM for 2 seconds.A beep will sound to confirm that the memory has beencleared.COMFORT ZONEThe Comfort Zone indicates how comfortable the climateis, based on current temperature and humiditymeasurements.NOTEZONE TEMPERATURE HUMIDITYAny >70%20 – 25 ° C(68 - 77 ° F)40 – 70%<40%AnyThis information is shown in the Humidity Area whenthe current measurement is displayed.RESET SYSTEMThe RESET buttons are located in the batterycompartment for the main unit and sensors. PressRESET when you change the batteries and wheneverperformance is not behaving as expected (for example,unable to establish radio frequency link with remotesensor or radio-controlled clock).When you press RESET, all settings will returnto default value, and you will lose all stored information.NOTEIndoorDisplayDesignat-edDisplayRemoteDisplayChannel 1Kinetic-waveIconRemoteDisplayChannel 2RemoteDisplayChannel 3RMR613HGA lab test R3 2/18/04, 2:22 PM11
EN12Do not make any changes or modifications to thisproduct. Unauthorized changes may void your right touse the product. The technical specification of thisproduct and contents of this user guide are subject tochange without notice. Images not drawn to scale.TROUBLESHOOTINGCheck here before contacting our customer servicedepartment.Problem Symptom RemedyCalendar Strange date /monthChange language( 9)Clock Cannot adjustclockDisable Atomic Clock( 9)Cannot auto-synch1. Adjust batteries.( 6)2. Press RESET( 11)3. Manually activateAtomic Clockfeature ( 8)SAFETY AND CAREClean the product with a slightly damp cloth and alcohol-free mild detergent. Avoid dropping the product or placingit in a high-traffic location.WARNINGSThis product is designed to give you years of service ifhandled properly. Observe the following guidelines:•Never immerse the product in water. This cancause electrical shock and damage the product.•Do not subject the main unit to extreme force,shock, or fluctuations in temperature or humidity.•Do not tamper with the internal components.•Do not mix new and old batteries or batteries ofdifferent types.•Do not use rechargeable batteries with thisproduct.•Remove the batteries if storing this product for along period of time.•Do not scratch the LCD display. Temp Shows “LLL”or “HHH”Temperature is out-of-rangeRMR613HGA lab test R3 2/18/04, 2:22 PM12
EN13Problem Symptom RemedyData doesnot matchmain unitInitiate a manual sensorsearch ( 8)CannotchangechannelCheck sensors. Onlyone sensor is working( 6)Check batteries ( 6)Check location ( 6)RemotesensorCannot locateremotesensorSPECIFICATIONSMAIN UNIT DIMENSIONSL x W x H 123 x 49.5 x 165 mm(4.84 x 19.5 x 6.50 inches)Weight 245 grams (8.64 ounces)with batteriesREMOTE SENSOR DIMENSIONSL x W x H 92 x 60 x 20 mm(3.6 x 2.4 x 0.79 inches)Weight 63 grams (2.22 ounces)without batteryTEMPERATUREUnit °C or °FIndoor Range -5 °C to 50 °C(23 °F to 122 °F)Outdoor Range -20 °C to 60 °C(-4 °F to 140 °F)Resolution 0.1 °C (0.2 °F)RELATIVE HUMIDITYRange 25% to 95%Resolution 1%REMOTE SENSOR (THGR122NX)RF frequency 433 MHzRange 30 meters (98 feet)with no obstructionsTransmission every 40 secondsChannel No. 1 - 3CLOCKAtomic Clock Auto or manual (disabled)Clock display HH:MM:SSHour format 12hr AM/PM or 24hrTime offset +/- 9 hoursRMR613HGA lab test R3 2/18/04, 2:22 PM13
EN14Calendar MM/DD; weekday in5 languages (E, D, F, I, S)Alarm Weekday and SingleAlarm; 2- minutecrescendoPOWERMain unit batteries 2 x UM-3 (AA) 1.5V alkalineSensor batteries 2 x UM-4 (AAA) 1.5ValkalineFCC STATEMENTThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received,including interference that may cause undesiredoperation.Warning: Changes or modifications to this unit notexpressly approved by the party responsible forcompliance could void the user's authority to operatethe equipment.NOTE: This equipment has been tested and found tocomply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation. Thisequipment generates, uses and can radiate radiofrequency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or televisionreception, which can be determined by turning theequipment off and on, the user is encouraged to try tocorrect the interference by one or more of the followingmeasures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipmentand receiver.•Connect the equipment into an outlet on a circuitdifferent from that to which the receiver isconnected.•Consult the dealer or an experienced radio/TVtechnician for help.RMR613HGA lab test R3 2/18/04, 2:22 PM14
EN15DECLARATION OF CONFORMITYThe information below is not to be used as contact forsupport or sales. Please call our customer service number(listed on our website at www.oregonscientific.com,or on the warranty card for this product) for all inquiriesinstead.WeName: Oregon Scientific, Inc.Address: 19861 SW 95th Place,Tualatin, Oregon 97062 USATelephone No.: 1-800-853-8883Fax No.: 1-503-684-8883declare that the productProduct No.: RMR613HGAProduct Name: Wireless Thermo-Hygro ClockManufacturer: IDT Technology LimitedAddress: Block C, 9/F, Kaiser Estate,Phase 1, 41 Man Yue St.,Hung Hom, Kowloon,Hong Kongis in conformity with Part 15 of the FCC Rules. Operationis subject to the following two conditions:1) This device may not cause harmfulinterference.2) This device must accept any interferencereceived, including interference that maycause undesired operation.RMR613HGA lab test R3 2/18/04, 2:22 PM15
P/N.: 086-003326-03© 2004 Oregon Scientific. All rights reserved.RMR613HGA lab test back coverR1 2/13/04, 2:14 PM1

Navigation menu