IDT Technology BPW800 Blood Pressure Wrist User Manual RGR126 COVER indd

IDT Technology Limited Blood Pressure Wrist RGR126 COVER indd

Users Manual

User ManualTalking Blood Pressure MonitorModel: BPW800使用指南語音腕式電子血壓計型號: BPW800
EN1TALKING BLOOD PRESSURE MONITORMODEL: BPW800USER MANUALCONTENTSIntroduction .................................................................... 2Key features ................................................................... 2 Front view.................................................................. 2 Rear view .................................................................. 3 LCD symbols ............................................................. 3Safety and care instructions ......................................... 4 Safety precautions .................................................... 4 Caring for your blood pressure monitor..................... 4About blood pressure .................................................... 4How the blood pressure monitor works ...................... 6Getting started ............................................................... 6 Installing and replacing the batteries......................... 6 Setting date and time ................................................ 7 Positioning the wrist cuff ........................................... 7Preparing to take blood pressure measurement ........ 8Taking a measurement .................................................. 8 Voice announcement................................................. 9Memory ......................................................................... 10 Recalling measurements stored in memory ............ 10Clear records ................................................................ 10 Deleting a single record .......................................... 10 Deleting all records ..................................................11Data transmission ........................................................ 11 Unique device ID ..................................................... 12Troubleshooting ........................................................... 12Technical specications .............................................. 13About Oregon Scientic .............................................. 14Information about the CE mark .................................. 14Symbol description(s) ................................................. 14Blood pressure log book ............................................. 14FCC statement .............................................................. 15BPW800_EN_R8.indd 1 2011/6/8 7:06:51 PM
EN2INTRODUCTIONThank you for selecting the Oregon ScienticTM Talking Wrist Type Blood Pressure Monitor (BPW800). The BPW800 features voice announcement and playback of blood pressure measurements for added convenience and has been designed to provide you with many years of reliable service. The unit can help you measure and track the following metrics:• Systolic pressure• Diastolic pressure• Mean arterial pressure• Pulse rate• Historic record of up to 30 measurements per user (maximum 2 users)Readings taken by the blood pressure monitor are equivalent to those obtained by a trained observer using the cuff and stethoscope auscultation method. Clinical performance were successfully done against ANSI/AAMI SP10 and international protocol, and the B.H.S.( British Hypertension Society) has rated this product “recommended for clinical and home use”, the highest grading available for blood pressure monitors. Please refer to BHS website http://www.bhsoc.org/bp_monitors/automatic_wrist.stmThis manual contains important safety and care information, and provides step-by-step instructions for using the product.Read the manual thoroughly before using the product.KEY FEATURESFRONT VIEW12354671. TALK / VOLUME button2. LCD 3. ON / OFF and GUEST button4. Speaker5. USER 1 / UP ARROW button6. USER 2 / DOWN ARROW button7. SET buttonBPW800_EN_R8.indd 2 2011/6/8 7:06:53 PM
EN3REAR VIEW211. Wrist cuff2. Battery compartment33. Unique Device IDLCD SYMBOLSSYMBOL DESCRIP-TION EXPLANATIONSystolic pressureThe highest blood pressure measuredDiastolic pressure The lowest blood pressure measuredTime (hour: minutes) Current timeMean arterial pressureAverage blood pressure measured (see “What is Mean Arterial Pressure (MAP)?” for more information)Pulse Pulse rate per minuteUser Shows which user prole (1 or 2 is being displayed)MemoryIf “MEM” shows, the displayed measurement value is from the memory and not necessarily from the last reading.If “MEM” ashes, there are 24 or more records per user which have not been uploaded. User is reminded to upload the data to the network to prevent records being erased.Weak batteryBatteries are low and need to be replacedInating Unit is inating with air to obtain the needed level of pressureDeating Wrist cuff air is exhausting or deatingBPW800_EN_R8.indd 3 2011/6/8 7:06:59 PM
EN4Millimeter(s) of mercury Measurement unit for blood pressureVoice activationVoice announcing your blood pressure measuredSAFETY AND CARE INSTRUCTIONSSAFETY PRECAUTIONSPlease observe the following safety precautions when setting up and using your blood pressure monitor.• This device is intended for adult use only.• This device is intended for non-invasive measuring and monitoring of arterial blood pressure. It is not intended for use on extremities other than the wrist or for functions other than obtaining a blood pressure measurement.• Do not confuse self-monitoring with self-diagnosis. This unit allows you to monitor your blood pressure. Do not begin or end medical treatment based solely on the measurements of this device. Consult a physician for treatment advice.• If you are taking medication, consult your physician to determine the most appropriate time to measure your blood pressure. Never change a prescribed medication without consulting your physician.• This unit is not suitable for continuous monitoring during medical emergencies or operations.• If the cuff pressure exceeds 40 kPa (300 mmHg), the unit will automatically deate. Should the cuff not deate when pressures exceeds 40 kPa (300mmHg), detach the cuff from the wrist and press the button to stop ination.• To avoid measurement errors, carefully read this manual before using the product.CARING FOR YOUR BLOOD PRESSURE MONITORTo ensure you receive the maximum benet from using this product, please observe the following care guidelines.• When not in use, store the unit in a dry place away from direct sunlight.• Do not immerse the unit in water. If it comes in contact with water, dry it immediately with a soft lint-free cloth.• Use a soft, slightly moistened cloth to wipe the unit and cuff. Do not use abrasive or corrosive cleaning agents, as these may cause damage.• Remove the batteries whenever you are planning to store the unit for a long period of time.• When replacing batteries, use new batteries as specied in this user manual. Do not mix new and old batteries.• Do not place objects such as stickers on the wrist cuff or unit, as these may impair the measurement.• Do not subject the unit to excessive force, shock, dust, temperature changes, or humidity. Such treatment may result in malfunction, a shorter electronic life span, damaged batteries, or distorted parts.• Do not tamper with the internal components. Doing so will terminate the product warranty and may cause damage.• The unit contains no user- serviceable parts.• If you no longer need to use this product, protect the environment by bringing it to your dealer or designated collection point for proper disposal.ABOUT BLOOD PRESSUREWhat is blood pressure?Blood pressure is the force generated by the blood against the walls of arteries during cardiac contraction and relaxation (e.g., the pumping action of the heart).BPW800_EN_R8.indd 4 2011/6/8 7:07:00 PM
EN5What are systolic pressure and diastolic pressure?When ventricles contract and pump blood out of the heart, blood pressure reaches its maximum value. This highest pressure in the cycle is known as systolic pressure. When the heart relaxes between heartbeats, the lowest blood pressure is diastolic pressure.What is mean arterial pressure (MAP)?The mean arterial pressure (MAP) is the average pressure that forces blood through the arteries. It is not the average of the systolic and diastolic blood pressure; rather, MAP corresponds to a state of balance between the compressive and expansive forces acting on the arterial wall when there is no distension outward or inward. MAP is an excellent way to evaluate the stress on the walls of your blood vessels, and can be used to evaluate excessive load on the cardiovascular system. Show your MAP history to your doctor to provide additional information that may help him or her understand your situation.Why measure your blood pressure?Blood pressure measurement can highly reect one’s health condition. High blood pressure is potentially linked to serious illnesses such as stroke, heart disease and kidney failure.Since there is no symptom most of the time, many hypertensive people do not realize they are at risk until their health is seriously threatened.What is the standard blood pressure classication?The gure illustrates the blood pressure classication made by World Health Organization (WHO) and International Society of Hypertension (ISH) in 1999.11010095908580)gHmm( erusserp doolb cilotsaiD120 130 140 150 160 180 Systolic blood pressure (mmHg)Grade 3 hypertension (severe)Grade 2 hypertension (moderate)Grade 1 hypertension (mild)Subgroup: borderlineHigh-normal Blood PressureNormal Blood PressureOptimal BloodPressureReference material: 1999 World Health Organization- International Society of Hypertension Guidelines for the management of hypertension, Journal of Hypertension, 1999, 17(2): 151-183. NOTE • Blood pressure is considered high when either the diastolic or systolic blood pressure value exceeds the normal range. When a patient’s systolic and diastolic blood pressures fall into different categories, the higher category should apply.• Only a physician can tell you your normal blood pressure range and the point at which you are at risk. Consult your physician to obtain these values. If the measurements taken with these products fall outside the range, consult your physician.BPW800_EN_R8.indd 5 2011/6/8 7:07:01 PM
EN6Why does my blood pressure uctuate throughout the day?Individual blood pressure varies greatly both on a daily and a seasonal or temperature basis. These variations may be more pronounced in hypertensive patients. Normally the blood pressure rises while at work and is at its lowest during sleep.The graph below illustrates the variations over a single day with measurement taken every 5 minutes. The thick line represents sleep time. The rises in blood pressure at 4PM (A in the graph) and 12AM (B in the graph) correspond to an attack of pain and sexual intercourse (Beven, Honour & Stott, Clin. Sci. 36:329, 1969).HOW THE BLOOD PRESSURE MONITOR WORKSThis product uses the Oscillometric Measuring method to detect your blood pressure. Before every measurement, the unit establishes a “zero pressure” equivalent to the air pressure.Then it starts inating the wrist cuff to 180mmHg or higher until it senses that it has blocked your blood in the artery. After that, the deation process starts, during which time the unit detects pressure oscillations generated by beat-to-beat pulsatile, which is used to determine the systolic, mean and diastolic pressure, and also your pulse rate. Any motion during this period will result in an incorrect measurement. After all readings are determined and displayed on the LCD, the measurement is nished and the wrist cuff automatically deates.GETTING STARTEDINSTALLING AND REPLACING THE BATTERIES1. Slide off the battery cover.2. Install the batteries by matching the correct polarity, as shown below. Always use the correct battery type (2 alkaline LR03 AAA-size).3. Replace the cover. NOTE Replace the batteries whenever the weak battery mark shows, the display is dim, or the display does not illuminate when the power is on. Replace all the batteries at the same time - it is dangerous to mix old and new batteries.BPW800_EN_R8.indd 6 2011/6/8 7:07:02 PM
EN7Contact your local waste disposal authority for instructions on how to dispose of used batteries. Used batteries can be harmful to the environment, and should not be thrown out with household trash.SETTING DATE AND TIMEIt is important to set the clock before using your blood pressure monitor, so that a time stamp can be assigned to each record that is stored in the memory.1. When the unit is off, press and hold SET for 2 seconds to enter the setting mode.2. The setting order is as follows: 12/24 hour format, hour, minute, year, month/day or day / month format, month and date.3. Press or to increase / decrease a value or change the setting.4. Press SET to accept the change and switch to the next setting.5. When you are nished, press to exit the setup menu.POSITIONING THE WRIST CUFFIt is important to properly position the wrist cuff to ensure that you receive an accurate reading.1. Remove all accessories (watch, bracelet, etc.) from your left wrist. If your physician has diagnosed you with poor circulation in your left arm, use your right wrist.2. Roll or push up your sleeve to expose the skin.3. Apply the cuff to your left wrist with your palm facing up.4. Position the edge of the cuff about 0.4 inches (1cm) from the bottom of your palm.5. Fasten the wrist cuff around your wrist, leaving no extra room between the cuff and your skin. If the cuff is too loose, the measurement will not be accurate. NOTE Graphics may not exactly match product.BPW800_EN_R8.indd 7 2011/6/8 7:07:04 PM
EN8PREPARING TO TAKE BLOOD PRESSURE MEASUREMENTYou can choose to take your blood pressure while sitting or lying down. Below are some helpful tips for taking a measurement:• Be sure to set the clock before taking your rst measurement, or whenever you replace the batteries, so that the date and time are stored in the memory with your history. For instructions, refer to “Setting date and time” section.• It is important to relax when taking your blood pressure. Try to take a 15-minute rest before you begin.• Do not lean backward or bend your wrist inward while taking a measurement.• Avoid talking or moving your ngers and hand while taking a measurement. Rapid movements or other activities may alter your reading.• Wait at least an hour before taking your blood pressure if you have just eaten a large meal.• Do not smoke or drink alcohol before taking your blood pressure.• Do not measure your blood pressure if you are under stress.• Wait at least 3 minutes between measurements. This allows your blood circulation to recover.• For a meaningful comparison, try to measure under similar conditions. For example, take daily measurements at approximately the same time, on the same wrist, or as directed by a physician.TAKING A MEASUREMENT 1. Choose the position from which you wish to measure - sitting or lying down.2. Position your body so that your wrist is parallel with your heart, using the chart and illustrations below as a guide.IF YOU ARE... THEN...Sitting down with an armrestPlace your elbow on a table, using an object as a support under your forearm. Your wrist should be parallel to your heart, with the palm facing up.Sitting down with no armrestPlace your arm across your chest with the wrist parallel to your heart. Hold your elbow with the other hand.Lying downPosition your wrist on a support, cushion, or your thigh so that it is parallel with your heart with the palm facing up.BPW800_EN_R8.indd 8 2011/6/8 7:07:05 PM
EN93. Relax your hand and press to turn on the unit.4. Select user:Press User MemoryGuest No memory storedUser 1 Memory stored under User 1User 2 Memory stored under User 2A voice will prompt you to sit in the correct position.5. Press again to begin measurement. A voice will remind you to relax and remain still. Wrist cuff will begin inating automatically to measure blood pressure. TIP To stop the measurement process at any time, press .Once the pressure reaches a certain level, it will slowly deate until the measurement results are displayed on the LCD.This unit can intelligently adjust the cuff pressure and inate to a higher-pressure level (>180 mmHG) when needed.Your systolic and diastolic pressure readings ash on the LCD, followed by MAP and pulse per minute readings every 2 seconds. At the same time, your measurement results and the blood pressure classication will also be announced. NOTE The unit automatically attempts to send record wirelessly to the hub. “PC” will appear on the screen. If data transmission fails, “Err” will appear on the screen.The unit switches off 1 minute after taking a measurement. To save battery life, press as soon as you are nished to turn off the unit.VOICE ANNOUNCEMENTThe BPW800 features voice playback during and after blood pressure measurement results, as well as general instructions to help you prepare for taking measurements. When the unit has nished taking your measurement, your blood pressure readings, pulse and blood pressure classication are announced.To repeat announcement: Press TALK / VOLUME.To change volume:1. Press and hold TALK / VOLUME.2. Press TALK / VOLUME repeatedly to select desired volume.Volume setting Volume level0 Mute1 Low2 High3. To exit, press or SET.BPW800_EN_R8.indd 9 2011/6/8 7:07:06 PM
EN10MEMORYThis device can record up to 30 records per user. The most recent record (1) is shown rst. Each new measurement is assigned to the rst (1) entry in the user record selected. All other records are pushed back one digit (e.g., 2 becomes 3, and so on), and the last record (30) is dropped from the list.For ease of reference, the date when the measurement was taken is shown with each record.Memory records will be kept even when the batteries become exhausted and are replaced.RECALLING MEASUREMENTS STORED IN MEMORYEnsure unit is off.Select user:• To view a history of User 1’s records, press .• To view a history of User 2’s records, press .View records:• Press the corresponding user button repeatedly ( or ) to see additional records. TIP Press and hold corresponding user button ( or ) to quickly toggle through all the entries.Hear record:• Press TALK / VOLUME.CLEAR RECORDSYou have the option of deleting your latest measurement record or entire measurement history. This is useful if measurements have not been accurately recorded and need to be recorded again.DELETING A SINGLE RECORD1. When unit is off, press or to select user.2. Press the corresponding user button repeatedly ( or ) to navigate to record to be deleted. NOTE The most recent record (1) is shown rst.3. Press and hold SET. “deL OnE” will be displayed on the LCD screen.4. a. Press and hold SET again to delete.“deL dOnE” indicates record has been successfully deleted.BPW800_EN_R8.indd 10 2011/6/8 7:07:08 PM
EN11 b. If you decide to abort the delete action insteadFOR ACTION RETURN TO SCREEN DISPLAYUser 1 Press twice User 1 records displayedUser 2 Press once User 2 records displayedDELETING ALL RECORDS1. When unit is off, press or to select user.2. Press and hold SET. “deL OnE” will be displayed on the LCD screen.3. Press to select option to delete all records (“del All” will appear on the screenv).4. a. Press and hold SET again to delete all records.MEMno The “deL dOnE” screen followed with the “no -–“ screen indicates all records have been successfully deleted and there are no records in memory. b. If you decide to abort the delete action insteadFOR ACTION RETURN TO SCREEN DISPLAYUser 1 Press once User 1 records displayedUser 2 Press twice User 2 records displayedDATA TRANSMISSIONTo help users keep track of their results, the measurements recorded by BPW800 can be easily uploaded to the network for viewing and analysis.For added convenience, the unit is programmed to send data automatically:- after taking measurement- after viewing records and unit detects there is data which was not sent successfully- at midnight everyday.User can also choose to manually send data.BPW800_EN_R8.indd 11 2011/6/8 7:07:09 PM
EN12To manually send data: 1. When unit is off, press or .2. When screen appears, press SET.DONE indicates successful data transmission.Err indicates unsuccessful data transmission. IMPORTANT To prevent records being erased before being uploaded to the network, users are reminded to send data when there are 24 records.UNIQUE DEVICE IDEach unit has a unique device ID which can be found on the device.TROUBLESHOOTINGThis section includes a list of error messages and frequently asked questions for problems you may encounter with your blood pressure monitor. If the product is not operating as you think it should, check here before arranging for servicing.ProblemSymptomCheck ThisRemedyNo powerDisplay is dim or will not light upBatteries are exhaustedReplace with new batteriesBatteries are inserted incorrectlyInsert the batteries correctly Low batteries shows on the displayBatteries are lowReplace with new batteriesProblemSymptomCheck ThisRemedyMemory full warningFlashing MEM appears on the display24 or more records per user have not been uploadedUpload the data to the network (refer to DATA TRANSMISSION).Error messageErr appears on the displayA measure-ment error occurred; Data transmission failedRelax for a moment and then measure again ; Move closer to the hub and reattempt to send dataErr 1, 2, or 3 appears on the displayThe wrist cuff is not secureRefasten the cuff and then measure againErr 4 appears on the displayThe monitor detected motion while measuringMovement can affect the measurement.Relax for a moment and then measure againErr 5 appears on the displayPressure is over 37.3kPa (280 mmHg)Relax for a moment and then measure againErr 6 appears on the displayDeation period was too longMovement can affect the measurement.Relax for a moment and then measure againBPW800_EN_R8.indd 12 2011/6/8 7:07:10 PM
EN13British Hypertension SocietyAssociation for the Advancement of Medical InstrumentationEuropean Society of Hypertension TECHNICAL SPECIFICATIONSApplicationMeasuring methodOscillometric / non-invasiveApplicationFor adult use onlyMeasurement locationWrist section of lower armMemoryMaximum 30 records per userMaximum number of users2DimensionsHeight x Width x Depth3.5 x 3.4 x 1.2 inches (90 x 86 x 30.8 mm)Weight6.3 oz (180g) without batteriesCuff circumference5.3 to 7.7 inches (13.5 to 19.5 cm) Measuring rangePressure30 to 280 mmHg (4.0 to 37.3 kPa) Pulse40 to 200 pulse/minAccuracyPressure+/- 3 mmHg (+/- 0.4 kPa) Pulse+/- 5% Error messageEExxappears on the displayA calibration error occurredRetake the measurement. If the problem persists, contact the retailer or our customer service department for further assistance. Refer to the warranty for contact information and return instructionsSettings are wrongDate and time are incorrectThe clock was not set or reset after installing new batteriesReset the clockNo user memoryCannot nd a recordThe memory was not saved after taking a measurementRetake the measurement.Press or to save the corresponding user’s memoryThe record was stored to the wrong user memoryPress to view User 1’s record. Press to view User 2’s recordBPW800_EN_R8.indd 13 2011/6/8 7:07:11 PM
EN14PowerPower supply3V DC, 2 LR03 / AAA / UM4-size 1.5V batteriesPower saveAuto power off after 1 minute of non-activityOperating environmentOperation50°F to 104°F (10°C to 40°C) Storage / Transport-4°F to 140°F (-20°C to 60°C)Humidity range10% to 83% relative humidity ABOUT OREGON SCIENTIFICVisit our website (www.oregonscientic.com) to learn more about Oregon Scientic products. If you’re in the US and would like to contact our Customer Care department directly, please visit: https://us.oregonscientic.com/service/support.aspFor international inquiries, please visit: http://us.oregonscientic.com/about/international.aspINFORMATION ABOUT THE CE MARKThis device complies with the European regulations based on the Medical Products Code, and bears the CE mark “CE0120”. The device has been quality inspected according to EU guideline 93/42/EEC and tested in compliance to the “EN1060-1 Non-invasive sphygmomanometers - Part 1, General requirements” and “EN1060-3 Non-invasive sphygmomanometers-Part3: Supplementary requirements for electromechanical blood pressure measuring systems”. The CE mark further indicates that this blood pressure monitor meets the general requirements for electronic products as regards to resistance to electromagnetic interference. Malfunctioning may however occur in the proximity of extremely strong electromagnetic elds. In accordance with the “Ordinance for Operators of Medical Products”, a technical inspection must be carried out if this device is used for industrial or commercial purposes.SYMBOL DESCRIPTION(S)Type B EquipmentReferenceEnterprise Production Guangdong Food and DrugLicense No. Monitoring Machinery Production License No. 20010422Standard Registration YZB/ Guangdong 0108-2008Serial No. Standard Enterprise Q/SZK 01-2006Serial No. BLOOD PRESSURE LOG BOOKTo create a log of your blood pressure history, complete the personal information section at the top, then enter the details (date, time, and measurements) for each reading you take.To plot your history, use an S (systolic), D (diastolic) and M (mean arterial pressure) to mark the points where each measurement falls on the chart, then connect the points to view your history over timeProtected by US. Patent no. 7,211,047BPW800_EN_R8.indd 14 2011/6/8 7:07:12 PM
EN15FCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio / TV technician for help.DECLARATION OF CONFORMITYThe following information is not to be used as contact for support or sales. Please visit our website at www.oregonscientic.com for all enquiries. WeName: Oregon Scientic, Inc.Address: 19861 SW 95th Ave.,Tualatin, Oregon 97062 USATelephone No.: 1-800-853-8883declare that the product Product No.: BPW800Product Name: Talking Blood Pressure Monitor Manufacturer: IDT Technology LimitedAddress: Block C, 9/F, Kaiser Estate, Phase 1,41 Man Yue St., Hung Hom, Kowloon, Hong Kongis in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation.BPW800_EN_R8.indd 15 2011/6/8 7:07:12 PM
EN1610 17Name: Age: Weight: (kg/lbs)DateTimeSYSDISMAP1589011015595112SSMMOOOCT OCT10PM 10PM8.010.713.316.018.721.324.026.729.385 906080100120140160180200220kPa mmHgBPW800_EN_R8.indd 16 2011/6/8 7:07:13 PM

Navigation menu