ICU Medical 20791 Hospira MedNet 802.11a/b/g Wireless Upgrade Module User Manual 430 11541 001

Hospira, Inc. Hospira MedNet 802.11a/b/g Wireless Upgrade Module 430 11541 001

Contents

User Manual

Hospira MedNet 802.11 a/b/g Wireless Upgrade ModuleConnectivity Engine (CE) Configuration GuideIncludes*Hospira MedNet® Plug ‘n Play Module (List 20677 & 20791-04-77) For Use with Plum A+ Infusers (Lists 11971, 12391, 20679 & 20792-04)*Hospira MedNet® Software (List 16033-04)430-11541-001
430-11541-001 CE Configuration Guide©Hospira, Inc.This document and the subject matter disclosed herein are proprietary information.Hospira retains all the exclusive rights of dissemination, reproduction, manufacture, and sale.Any party using this document accepts it in confidence, and agrees not to duplicate it in wholeor in part nor disclose it to others without the written consent of Hospira.
CE Configuration Guide i 430-11541-001Change HistoryPart Number Description of Change430-11541-001 (Rev. 01/07)Original issue
CHANGE HISTORY430-11541-001 ii CE Configuration GuideThis page intentionally left blank.
CE Configuration Guide 430-11541-001ContentsINTRODUCTION TO THE MEDNET WIRELESS MODULE - - - - - - - - - - - - - - - - - - - - 1FCC INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1US FCC (FEDERAL COMMUNICATIONS COMMISSION) STATEMENT - - - - - - - - - - - - - - 1FCC INTERFERENCE STATEMENT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1RADIO FREQUENCY EXPOSURE STATEMENT - - - - - - - - - - - - - - - - - - - - - - - - - 1GUIDANCE ON EMC COMPATIBILITY - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2INSTALLING THE HOSPIRA MEDNET® PLUG ’N PLAY MODULE (LIST 20677-04) - - - - - - - 3To Replace the Module, proceed as follows: - - - - - - - - - - - - - - - - - - - - 3CONFIGURATION GUIDE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4GENERAL NOTES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4SCOPE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4ASSUMPTIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4INTRODUCTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4SCREENS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5STATUS PROPERTIES SCREEN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5ETHERNET PROPERTIES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6WIRELESS PROPERTIES - WIRELESS ENABLED - - - - - - - - - - - - - - - - - - - - - - - - 6WIRELESS ENABLED- DHCP ENABLED - - - - - - - - - - - - - - - - - - - - - - - - - - - 8SECURITY - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10WEP - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11WPA PERSONAL - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12WPA ENTERPRISE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13WPA ENTERPRISE - AUTHENTICATION TYPE - - - - - - - - - - - - - - - - - - - - - - - - - 14CERTIFICATES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15HMSS (HOSPIRA MEDNET® SERVER SUITE) - - - - - - - - - - - - - - - - - - - - - - - - - 16SERVICE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16ADMINISTRATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17FINISH CONFIGURATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17WIRELESS LAN DEVICE SPECIFICATIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
CE Configuration Guide 1 430-11541-001Introduction to the MedNet Wireless ModuleThe Hospira MedNet 802.11 a/b/g Wireless Upgrade Module is designed as an upgrade module for Hospira Plum A+ Infusion Systems (Lists 20792, 20679, 12391 & 11791). The host units are mobile infusion devices designed to be employed in the medical care envi-ronment. The wireless functionality afforded to the host units from the upgrade module include the ability to download drug library information for simultaneously operating hosts without requiring a physical connection and the time spent visiting the rooms they occupy.FCC InformationUS FCC (Federal Communications Commission) Statement• This device complies with part 15C, 15E of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including that may cause undesired operation of these devices.FCC Interference Statement• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15C, 15E of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the distance between the equipment and the receiver.- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. • Changes or modifications not expressly approved by Hospira could void the user's authority to operate the equipment.Radio Frequency Exposure Statement• The Wireless LAN radio device in the Connectivity Engine peripheral board with this infusion device has been evaluated and found compliant to the requirements of the following Radio Frequency exposure standards:- Federal Communications Commission, OET Bulletin 65 (Edition 97-01), Supplement C (Edition 01-01), Evaluating Compliance with FCC Guidelines for Human Exposure to Radio frequency Electromagnetic Fields, July 2001.
430-11541-001 2 CE Configuration Guide- Industry Canada, Evaluation Procedure for Mobile and Portable Radio Transmitters with respect to Health Canada's Safety Code 6 for Exposure of Humans to Radio Frequency Fields, Radio Standards Specification RSS-102 Issue 1 (Provisional): September 1999.• The radiated output power of this Wireless LAN device is far below the FCC radio frequency exposure limits. The Wireless LAN device has been evaluated with zero inches separation of human body from the antenna and found to be compliant with FCC RF exposure limits.Guidance on EMC Compatibility• There is a shared responsibility between manufacturers, customers and users to ensure that Medical Equipment and Systems are designed and operated as intended. Medical electrical equipment needs special precautions regarding electromagnetic compatibility and needs to be installed and used according to the electromagnetic compatibility information provided in this manual.• The device is suitable for use in all establishments, including domestic establishments. If extended operation during power mains interruption is needed, use battery power.• Always manage the electromagnetic environment. • The guidance included in this manual provides information needed to:- Determine the device’s suitability for use in the intended environment.- Manage the electromagnetic environment to permit the device to perform as intended without disturbing other equipment.• Separate the device from all other electronic equipment. If the device must be used near other electrical equipment, monitor the equipment to ensure there is no electromagnetic interference.• Devices should not be used adjacent to or stacked with other equipment. If the device must be used adjacent to or stacked with other equipment, monitor the devices to verify normal operation.• USE ONLY components specifically labeled for use with the Plum A+ Infusion System to help ensure the device operates as intended.• If you suspect external RF sources or other equipment are influencing device operation, contact the biomedical engineering department for additional guidelines concerning electromagnetic immunity.• Contact the biomedical engineering department for additional information in the technical service manual concerning operating devices near RF sources.• This device has been tested with the Hospira Plum A+ Infusion System and found to comply with the International Standard IEC 60601-1-2 Edition 2.1 Electromagnetic Compatibility (EMC) of Medical Electrical Equipment.
CE Configuration Guide 3 430-11541-001Installing the Hospira MedNet® Plug ’n Play Module (List 20677-04)Note: For use with Hospira Plum A+ Infusers with software version 10.3 andhigher.Note: The recommended tool for this procedure is a No. 2 Phillips screwdriver.CAUTION: CAUTION: Use proper ESD grounding techniques when handlingcomponents. Wear an antistatic wrist strap and use an ESD-protected workstation.Store the PWA in an antistatic bag before placing it on any surface.To Replace the Module, proceed as follows:1. Press [ON/OFF] to power the infuserOFF. 2. Disconnect the infuser from ACpower.CAUTION: Infuser must bepowered off for at least 2 minutesprior to removing the module.3. Carefully place the infuser face down.4. Using a No. 2 Phillips screwdriver,remove the two screws from themodule (one in the upper left cornerand one in the lower left corner). Referto Figure 1.5. Carefully pull the module away from the infuser. Note: Note: When removing the module, note the placement guides the peripheralPWA rests between.6. Install the replacement module in theexact reverse order of removal usingthe screws and lock washers includedwith the replacement module. Referto Figure 2.Note: Note: Verify the module isplaced properly between the guidesand fits correctly into the CPU PWA. 7. Connect the infuser to AC power. 8. To verify successful modulereplacement, power ON the infuserand let the system perform itsself-tests. The screen will display anE453 Malfunction. 9. Power the infuser OFF, and then ONagain. 10. If upgrading from version 12.x, The infuser is ready for operation.11. If upgrading from version 10.x or 11.x:a) Enter the serial number. b) Power the infuser OFF, and then ON again. The infuser is ready for operation.Figure 1. Remove ScrewsFigure 2. Insert Module
430-11541-001 4 CE Configuration GuideConfiguration GuideGeneral NotesThis document is a general guide for using the CE Configuration Tool.Note: Please refer to the Installation and Configuration Guide and the User Guide for proper use, warnings and cautions associated with the Hospira MedNet® Software.The application software is a web page server that resides in the CE. From the server on which HMSS resides, access the infuser Status screen by entering:https://infuserIPaddress:8443Note: The default IP address for the infuser is 192.168.0.100 and the Netmask is 255.255.0.0ScopeThe scope of this document is to outline the functionality of the CE Configuration web page that displays in the Microsoft® Internet Explorer Version 6 browser window. This document does not address the functionality of the browser in which the web page displays, nor does it address specific topics related to Ethernet, TCP/IP, Internet, or wire-less security and authentication. AssumptionsThe user has a working knowledge of the following terms, features, concepts and facili-ties: • Operation of Microsoft® Windows • Operation of Microsoft® Internet Explorer Version 6 browser • Basic understanding of Ethernet, IP addresses, MAC Addresses, Subnet Masks, Gateways, DHCP, DNS, Domains • Basic understanding of HTTP including Basic Authentication, SSL, user IDs, and passwords • Basic understanding of other Ethernet protocols including Telnet, FTP, TCP, UDP • URL formats including protocol and port specifications • Security configuration including WEP, SSID, Access Points, Authentication Types IntroductionThe following is information provided for general use: • A navigation menu is displayed on the left side of the page • The Tab key has no effect on the navigation menu items (i.e., it will not select or highlight them) • Unless otherwise specified, “alphanumeric characters” include all upper- and lower-case letters and numbers
CE Configuration Guide 5 430-11541-001• In this document, “character” refers to all upper- and lower-case letters, numbers, punctuation marks, symbols (i.e., 8-bit character codes between 32 and 126 inclusive)Screens Note: Hovering your mouse over such fields as Identity or Password will activate a tooltip with admissible characters.Status Properties ScreenScreen FunctionStatus Current status of the CEEthernet Properties Ethernet properties settingsWireless Properties Wireless properties settingsWireless Security Properties Wireless security properties settingsCertificates Wireless certificates properties settingsHMSS Properties Hospira MedNet® Server Suite propertiesService Properties Service settingsAdministration Administration settingsFinish Configuration Confirmation and resultsConfiguration Results Configuration resultsField/Button Content/ActionDevice Status Device Name: value entered on HMSS ScreenDevice Type: Device Type connected toCE App Version: CE version string CE System Version: CE system stringEthernet If Ethernet interface is active: IP Address, Subnet Mask, MAC AddressIf WLAN interface is active: (Interface is down) Wireless LAN WLAN Interface is Active: IP Address, Subnet Mask, MAC Address, WEP Enabled, Access Point, SSID, Current Channel, Signal Quality Level, Noise Level, Frequency Band, Transmit Power, Power SaveWLAN Interface is not active: (Interface is down) HMSS HMSS Host/ URL or IP Address Status: Connected, "Not responding", "(Status is not available)”Pump Status: Connected, "Not responding", "(Status is not available)" Refresh Updates all Status sections with current valuesNext Displays the Ethernet Properties screen
430-11541-001 6 CE Configuration GuideEthernet PropertiesWireless Properties - Wireless Enabled Field/Button Content/ActionMAC Address (Not configurable, READ ONLY)Device MAC address Default: factory default MAC address Use DHCP Unchecked: Displays IP Address, Subnet Mask, Gateway fields, DNS1, DNS2, and DomainChecked: Hides IP Address, Subnet Mask, Gateway fields, DNS1, DNS2, and DomainDefault: unchecked IP Address (available when DHCP is unchecked) IP Address of the device Default: 192.168.0.100 Subnet Mask (available when DHCP is unchecked) Subnet Mask of the device Default: 255.255.0.0 Gateway (available when DHCP is unchecked) Gateway Host Name or IP Address Default: BlankDNS1 (available when DHCP is unchecked) Primary DNS IP AddressDefault: BlankDNS2 (available when DHCP is unchecked) - Optional fieldSecondary DNS IP Address Default: BlankDomain (available when DHCP is unchecked) Domain nameAlphanumeric 1-255 characters and the following 3 characters:Period (.), hyphen (-), underscore (_)Default: BlankPrevious Displays the previous screenReset Allows you to reconfigure the current page onlyFinish Displays the Finish Configuration screen and should only be clicked when all the variables have been enteredNext Displays the following screenField/Button Content/ActionWireless Enabled Checked: Enables Wireless Capability and displays the rest of the fields and checkboxes on the screen Unchecked: Disables Wireless Capability and hides the rest of the fields and checkboxes on the screen Default: Checked
CE Configuration Guide 7 430-11541-001Use DHCP Unchecked: Displays IP Address, Subnet Mask, Gateway fields, DNS1, DNS2 and DomainChecked: Hides IP Address, Subnet Mask, Gateway fields, DNS1, DNS2 and DomainDefault: unchecked IP Address (DHCP is unchecked) IP Address of the device Default: 192.168.0.100 Subnet Mask (DHCP is unchecked) Subnet Mask of the device Default: 255.255.0.0 Gateway (DHCP is unchecked) Gateway Host Name or IP AddressDefault: Blank DNS1 (DHCP is unchecked)- Optional field Primary DNS IP AddressDefault: BlankDNS2 (DHCP is unchecked)- Optional field Secondary DNS IP AddressDefault: BlankDomain (DHCP is unchecked) Domain nameAlphanumeric 1-255 characters and the following 3 characters:Period (.), hyphen (-), underscore (_)Default: BlankSSID Alphanumeric, space, and the following characters: ~ ! @ # % ^ & * ( ) _ { } | : < > ` - = ; ' , . / 2-32charactersAdditionally, the following three characters cannot be the first character: ! # ;Frequency 802.11b (2.4GHz)802.11b/802.11g (2.4GHz)802.11g (2.4GHz)802.11a (5GHz)AutoDefault: Auto (The "Auto" option is comprised of 802.11a, 802.11b and 802.11g.)Note: Selecting Auto prompts a sequential search and may be slower802.11B Preamble LongShortDefault: LongPower Save Continuous Access Mode Maximum Power SaveDefault: Maximum Power SaveField/Button Content/Action
430-11541-001 8 CE Configuration GuideWireless Enabled- DHCP EnabledTransmit Power 100% (maximum), 75%, 50%, 25%, 12%, 6%, 4%, 2%, 1% (lowest)Default: 100%Note: 100%=50 mW; 50%=25 mW; 25%=12.5 mW; Minimum=1 mWCountry List of countriesDefault: United StatesNote: Selecting a country from the drop-down list, adjusts automatically the frequency and channels.Previous Displays the previous screenReset Allows you to reconfigure the current page onlyFinish Displays the Finish Configuration screen and should only be clicked when all the variables have been enteredNext Displays the following screenField/Button Content/ActionWireless Enabled Checked: Enables Wireless Capability and displays the rest of the fields and checkboxes on the screen Unchecked: Disables Wireless Capability and hides the rest of the fields and checkboxes on the screen Default: Checked Use DHCP Unchecked: Displays IP Address, Subnet Mask, Gateway fields, DNS1, DNS2 and DomainChecked: Hides IP Address, Subnet Mask, Gateway fields, DNS1, DNS2 and DomainDefault: unchecked Renew Lease on Wireless AP Association Unchecked: Disables DHCP lease renewal on wireless AP changeChecked: Enables DHCP lease renewal on wireless AP changeDefault: uncheckedSSID Alphanumeric, space, and the following characters: ~ ! @ # % ^ & * ( ) _ { } | : < > ` - = ; ' , . /2-32 charactersAdditionally, the following three characters cannot be the first character: ! # ;Field/Button Content/Action
CE Configuration Guide 9 430-11541-001Frequency 802.11b (2.4GHz)802.11b/802.11g (2.4GHz)802.11g (2.4GHz)802.11a (5GHz)AutoDefault: Auto (The "Auto" option is comprised of 802.11a, 802.11b and 802.11g)Note: Selecting Auto prompts a sequential search and may be slower. Applies if the frequency does not include 802.11b802.11B Preamble LongShortDefault: LongPower Save Continuous Access Mode Maximum Power SaveDefault: Maximum Power SaveTransmit Power 100% (maximum), 75%, 50%, 25%, 12%, 6%, 4%, 2%, 1% (lowest)Default: 100%Note: 100%=50 mW; 50%=25 mW; 25%=12.5 mW; Minimum=1 mWCountry List of countriesDefault: United StatesNote: Selecting a country from the drop-down list, adjusts automatically the frequency and channels.Previous Displays the previous screenReset Allows you to reconfigure the current page onlyFinish Displays the Finish Configuration screen and should only be clicked when all the variables have been enteredNext Displays the following screenField/Button Content/Action
430-11541-001 10 CE Configuration GuideSecurityImportant: Security settings, such as identify, password, etc. should conform to your infrastructure. Field/Button Content/ActionSecurity Disabled WEP WPA Personal WPA EnterpriseWhen WEP is selected, displays Authentication Type, Key Length, WEP Keys 0 - 3, and Default Key fieldsWhen WPA Personal is selected, displays Shared Key fieldWhen WPA Enterprise is selected, displays Authentication Type and Validate Server Cert objects and fieldsDefault: Disabled
CE Configuration Guide 11 430-11541-001WEPNote: If the information is entered incorrectly, an error message will pop-up indicating what fields needs changing and display the parameters.Field/Button Content/ActionSecurity Disabled WEP (Static only)WPA Personal WPA EnterpriseWhen WEP is selected, displays Authentication Type, Key Length, WEP Keys 0 - 3, and Default Key fieldsWhen WPA Personal is selected, displays Shared Key fieldWhen WPA Enterprise is selected, displays Authentication Type and Validate Server Cert objects and fieldsDefault: DisabledAuthentication Type (WEP selected) OpenSharedDefault: Open Key Length WEP 40 (40 + 24/10 hex digits)WEP 104 (104 + 24/26 hex digits)WEP Key 0 (Required field if this WEP key number is selected in the "Default Key" field)10 or 26 hex digits Default: BlankWEP Key 1(Required field if this WEP key number is selected in the "Default Key" field)10 or 26 hex digits Default: BlankWEP Key 2(Required field if this WEP key number is selected in the "Default Key" field)10 or 26 hex digits Default: BlankWEP Key 3(Required field if this WEP key number is selected in the "Default Key" field)10 or 26 hex digits Default: BlankDefault Key 0, 1, 2, 3Previous Displays the previous screenReset Allows you to reconfigure the current page onlyFinish Displays the Finish Configuration screen and should only be clicked when all the variables have been enteredNext Displays the following screen
430-11541-001 12 CE Configuration GuideWPA PersonalField/Button Content/ActionSecurity Disabled WEP WPA Personal WPA EnterpriseWhen WPA Personal is selected, displays Shared Key fieldDefault: DisabledEncryption Protocol WPA2-CCMP/AES (requires appropriate hardware for access points)WPA1-TKIPDefault: WPA2-CCMP/AESShared Key 64 (hex) character shared key value or an 8 - 63 ASCII character pass-phraseNote: An invalid entry will prompt an error message and display the field requirementsPrevious Displays the previous screenReset Allows you to reconfigure the current page onlyFinish Displays the Finish Configuration screen and should only be clicked when all the variables have been enteredNext Displays the following screen
CE Configuration Guide 13 430-11541-001WPA EnterpriseNote: WPA Enterprise requires an authentication server. We support Free Radius and Cisco ACS.Note: No format checking is performed at the time a file is uploaded.Field/Button Content/ActionSecurity Disabled WEP WPA Personal WPA EnterpriseWhen WPA Enterprise is selected, displays Authentication Type and Validate Server Cert objects and fieldsDefault: DisabledEncryption Protocol WPA2-CCMP/AES (requires appropriate hardware for access points)WPA1-TKIPDefault: WPA2-CCMP/AESAuthentication Type (see table below for fields available according to settings)EAP-TLS (Default setting)EAP-TTLS (FreeRadius only)EAP-PEAPEAP-FAST (Cisco ACS only)Previous Displays the previous screenReset Allows you to reconfigure the current page onlyFinish Displays the Finish Configuration screen and should only be clicked when all the variables have been enteredNext Displays the following screen
430-11541-001 14 CE Configuration GuideWPA Enterprise - Authentication TypeThe software shall support the following file type for WPA Authentication:• FAST PAC File - FAST Protected Access Credential (PAC) fileAuthentication Type: Field/ContentEAP-TLS (Default) IdentityValidate Server CertNote: Placing a checkmark in the box next to Validate Server Cert: enables the server certificate validation. If checked, a Client Certificate and an appropriate CA Certificate should be uploaded on the Certificates pageEAP-TTLS Protocol:• EAP-MSCHAPv2• EAP-MD5•PAP• CHAP• MSCHAP• MSCHAPv2Identity Password Confirm PasswordAnonymous identity (Optional) Validate Server Cert (Optional)Note: Placing a checkmark in the box next to Validate Server Cert: enables the server certificate validation. If checked, an appropriate CA Certificate should be uploaded on the Certificates pageEAP-PEAP Peap Inner Protocol:• EAP-MSCHAPv2• EAP-MD5Identity Password Confirm PasswordAnonymous identity (Optional) Validate Server Cert (Optional)Note: Placing a checkmark in the box next to Validate Server Cert: enables the server certificate validation. If checked, an appropriate CA Certificate should be uploaded on the Certificates pageEAP-FAST Identity Password Confirm PasswordAnonymous identity (Optional) PAC File (Selecting Upload accesses the pop-up Browse feature)Important: Verify the ACS server’s system configuration has the AP EAP request timeout set at 180 and the AP Activity Timeout “unknown (non-cisco)” default is set at 220 (seconds)
CE Configuration Guide 15 430-11541-001CertificatesThis category is optional and will depend upon your network configuration. The software shall support the following file types for WPA authentication:• CA Certificate - PEM, DER• Client Certificate - PEM, DER• Private Key File - PEM, DER, PFX Field/Button Content/ActionClient Certificate Default Hospira CertificateUser Specified CertificateDefault: Hospira CertificateClient Certificate (User Specified Certificate selected)Private Key File (upload/browse feature)PasswordConfirm PasswordCertificate File (upload/browse feature)Note: A “Success” message appears once the file is loaded and the file information displays. If the transfer fails, an error message displaysCA Certificates Active CertificatesAdd Certificate (upload/browse feature)Note: The software shall allow up to three CA Certificates to be active at one timePrevious Displays the previous screenReset Allows you to reconfigure the current page onlyFinish Displays the Finish Configuration screen and should only be clicked when all the variables have been enteredNext Displays the following screen
430-11541-001 16 CE Configuration GuideHMSS (Hospira MedNet® Server Suite)Service Telnet and FTP are enabled by default in order to generate the configuration. Note: We recommend turning off both Telnet and FTP before putting the pump into production and disabling HTTP access to the device (Port 8008).Field/Button Content/ActionHMSS HostIP Address Server IP address or hostname Format: alphanumeric and the following (3) characters: Period (.), hyphen (-), underscore (_). The first character must be an alpha-character and the last character may not be a hyphen (-) character. A valid IP address is of the form "xxx.xxx.xxx.xxx" where xxx is a number between 0 and 255.HMSS SSL Enabled Checked: Enables SSL mode during HMSS communicationsUnchecked: Disables SSL mode during HMSS communicationsDefault: uncheckedImportant: The appropriate port needs to be opened for outbound traffic. Port 8443 or 8080 for device to HMSS and Port 80 or 443 for HMSS to deviceDevice Name Device unique ID1-255 characters or lessNote: We recommend using 15 characters or less. Using more than 15 characters may affect HMSS report layoutsDefault: device00 (must be renamed - cannot be saved)Device Type (READ ONLY) Hospira Plum A+ orHospira Plum A+(CE) or Hospira PCA orHospira SymbiqPrevious Displays the previous screenReset Allows you to reconfigure the current page onlyFinish Displays the Finish Configuration screen and should only be clicked when all the variables have been enteredNext Displays the following screenField/Button Content/ActionTelnet Enabled Checked: The CE Telnet service on port 23 is enabledUnchecked: The CE Telnet service is disabledFTP Enabled Checked: The CE FTP service on port 21 is enabledUnchecked: The CE FTP service is disabledNon-Secure Configuration Access (HTTP) Enabled Checked: The non-secure HTTP access to the web configuration pages is enabled on port 8008Unchecked: HTTP access to the web is disabled
CE Configuration Guide 17 430-11541-001Note: Web configuration access to the device using HTTPs (SSL) is always enabled.AdministrationFinish ConfigurationNote: You may want to verify some or all of the previous screens to ensure the information is entered correctly. It may take up to 5 minutes to activate the changes. The Configuration Successful screen displays. If a configuration error occurred, you will be prompted to use the menu to return to a page of your choice.Close the browser and remove the Ethernet cable is you wish to test the infuser on wireless mode. The computer will reboot in a few seconds.Previous Displays the previous screenReset Allows you to reconfigure the current page onlyFinish Displays the Finish Configuration screen and should only be clicked when all the variables have been enteredNext Displays the following screenField/Button Content/ActionWeb User Web log in username. Format: ASCII, 1-31 characters. Colon (:) is not allowedDefault: adminWeb Password Web password. Format: ASCII, 1-20 charactersDefault: adminConfirm Password Confirms the password entered displaying as a dot for each character Note: An error message displays if the confirmed password does not match the web passwordPrevious Displays the previous screenReset Allows you to reconfigure the current page onlyFinish Displays the Finish Configuration screen and should only be clicked when all the variables have been enteredNext Displays the following screenField/Button Content/ActionPrevious Displays the previous screenFinish Commits the configuration changes to the deviceField/Button Content/Action
430-11541-001 18 CE Configuration GuideWireless Lan Device SpecificationsStandards: IEEE802.11a/b/gTransmit Power: 802.11 b/g: 17.6 dBm802.11 a: 19 dBmAntenna: Integrated surface mount antenna
430-11541-001-END CE Configuration GuideFor technical assistance, product return authorization, and to order parts, accessories, or manuals withinthe United States, contact Hospira Technical Support Operations.1-800-241-4002For additional services and technical training courses, visit the website at www.hospira.com.For technical assistance and services outside the United States, contact the local Hospira sales office.CAUTION: Federal (USA) law restricts this infuser to sale by or on the order of a physician or otherlicensed practitioner.Plum A+, LifeCare PCA and Symbiq are registered trademarks of Hospira, Inc. Microsoft and Windows arenot trademarks or registered trademarks of Hospira, Inc. The Symbiq infusion system uses components andtechnologies protected by U.S. Patent Numbers USD500326; USD515205; US5989222; US519175;US5462256; US5586868; US5816779; US5681285. Other patents pending. This document and the subject matter disclosed herein are proprietary information. Hospira retains all theexclusive rights of dissemination, reproduction, manufacture, and sale. Any party using this documentaccepts it in confidence, and agrees not to duplicate it in whole or in part nor disclose it to others withoutthe written consent of Hospira.DUT INFORMATIONFCC ID: STJ-20791IC No: 5627A-20791Certifications: FCC Part 15.247, 15.407IC RSS-210, RSS-102Device Name: Hospira MedNet 802.11 a/b/g Wireless Upgrade ModuleNote: For use with Hospira PlumA+ Infusion systemModel Nos Covered: 20791-04-77, 20677-04-77Note: Above two device model numbers are based on the same assembly. Device Model 20791-04-XX is meant for use in models 20792-04-XX and 20679-04-XX of PlumA+ Infusion System and device model 20677-04-XX is meant for use in models 12391-04-XX and 11971-04-XX Plum A+ Infusion Systems.© Hospira, Inc.Complies with limits for Class B digital device establishedby FCC Rules, Part 15Attention, consult accompanying documents.CCF

Navigation menu