Hyundai IBT SLIMVIEW527B 15-inch LCD Monitor User Manual

Hyundai IBT Corp. 15-inch LCD Monitor Users Manual

Users Manual

NEXTSlimView 527User’s Guide
U.S.A.U.S.FEDERAL COMMUNICATIONS COMMISSIONRADIO FREQUENCY INTERFERENCE STATEMENTINFORMATION TO THE USERNOTE : This equipment has been tested and found to comply with the limits for aClass B digital device pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for assistance.Changes or modification not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.Connecting of peripherals requires the use of grounded shielded signal cables.BACKNEXT
TCO'95Congratulations ! You have just purchased a TCO'95 approved and labelled product! Your choice has provided you with a product developed for professional use.Your purchase has also contributed to reducing the burden on the environment and also, to the further development of environmentally adapted electronics products.Why do we have environmentally labelled computers?In many countries, environmental labelling has become an established method forencouraging the adaptation of goods and services to the environment. The main problem,as far as computers and other electronics equipment are concerned, is that environmentallyharmful substances are used both in the products and during the manufacturing. Since ithas not been possible for the majority of electronics equipment to be recycled in asatisfactory way, most of these potentially damaging substances sooner or later enterNature.There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work(internal) andnatural(external) environments. Since all methods of conventional electricity generationhave a negative effect on the environment(acidic and climate-influencing emissions,radioactive waste, etc.), it is vital to conserve energy. Electronics equipment in officesconsume an enormous amount of energy since they are often left running continuously.What does labelling involve?This product meets the requirements for the TCO'95 scheme which provides for international and environmental labelling of personal computers. The labelling scheme wasdeveloped as a joint effort by the TCO (The Swedish Confederation of ProfessionalEmployees), Naturskyddsforeningen (The Swedish Society for Nature Conservation) andNUTEK (The National Board for Industrial and Technical Development in Sweden).The requirements cover a wide range of issues: environment, ergonomics, usability, emissionof electrical and magnetic fields, energy consumption and electrical and fire safety.The environmental demands concern restrictions on the presence and use of heavy metals,brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents,among other things. The product must be prepared for recycling and the manufacturer isobliged to have an environmental plan which must be adhered to in each country where thecompany implements its operational policy.The energy requirements include a demand that the computer and/or display, after acertain period of inactivity, shall reduce its power consumption to a lower level in one ormore stages. The length of time to reactivate the computer shall be reasonable for the user.Labelled products must meet strict environmental demands, for example, in respect of thereduction of electric and magnetic fields, physical and visual ergonomics and goodusability.On the back page of this folder, you will find a brief summary of the environmental requirements met by this product. The complete environmental criteriadocument may be ordered from:TCO Development UnitS-114 94 StockholmSwedenFax: +46 8 782 92 07Email (Internet) : development @ tco.seCurrent information regarding TCO'95 approved and labelled products may also be obtained via the Internet, using the address:http://www.tco-info.com/TCO'95 is a co-operative project between TCO (The Swedish Confederation of Professional Employees), Naturskyddsforeningen (The Swedish Society for NatureConservation) and NUTEK (The National Board for Industrial and Technical Develo pmentin Sweden).Environmental RequirementsBrominated flame retardantsBrominated flame retardants are present in printed circuit boards, cables, wires, casingsand housings. In turn, they delay the spread of fire. Up to thirty percent of the plastic in a computer casing can consist of flame retardant substances. These are related to group of environmental toxins, PCBs, which are suspected to give rise to similar harm,another including reproductive damage in fish eating birds and mammals, due to the bio-accumulative processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur.TCO'95 demand requires that plastic components weighing more than 25 grams must not contain organically bound chlorine and bromine.Lead**Lead can be found in picture tubes, display screens; solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning.TCO'95 requirement permits the inclusion of lead since no replacement has yet been developed. Cadmium**Cadmium is present in rechargeable batteries and in the colour generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses.TCO'95 requirement states that batteries may not contain more than 25 ppm (parts per million) of cadmium. The colour-generating layers of display screens must not contain any cadmium.Mercury**Mercury is sometimes found in batteries, relays and switches. Mercury damages thenervous system and is toxic in high doses.TCO'95 requirement states that batteries may not contain more than 25 ppm (parts per million) of mercury. It also demands that no mercury is present in any of the electrical or electronicscomponents concerned with the display unit.CFCs (freons)CFCs (freons) are sometimes used for washing printed circuit boards and in the manufacturing of expanded foam for packaging. CFCs break down ozone and therebydamage the ozone layer in the stratosphere, causing increased reception on Earth ofultraviolet light with consequent increased risks of skin cancer (malignant melanoma).The relevant TCO'95 requirement: Neither CFCs nor HCFCs may be used during the manufacturing of the product or its packaging.* Bio-accumulative is defined as substances which accumulate within living organisms* * Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
°·E N G L I S HPlease check your power cord before installation if it is UL listed one.°·F R A N Ç A I SVeuillez vérifier que votre cordon d'alimentation soit homologué UL avantl ' i n s t a l l a t i o n .°·I T A L I A N OPrima di installare controllare che il cavo di alimentazione sia approvato UL.°·D E U T S C HBitte prüfen Sie vor der Installation des Netzkabels, ob es in der UL-Listeaufgeführt ist.°·E S P A Ñ O LCompruebe el cable de potencia antes de la instalación si es uno de la listaU L .P910-ENG 01.2.15 4:46 PM ∆‰¿Ã¡ˆF
SlimView 52715" TFT LCD Color MonitorBACKNEXTContents4. Adjusting the picture ................9/174-1. Using the On Screen Display ........10/174-2. Direct access buttons ....................10/174-3. OSD Adjustments ........................11/175. Display power management ..13/17Reducing power consumption .........13/176. Troubleshooting ......................14/177. Specifications ..........................17/171. Introduction ...............................1/172. Safety Information ...................1/173. Installing the monitor ..............4/173-1. Packing List ....................................4/173-2. Selecting a suitable location .........5/173-3. Connecting the monitor ................5/173-4. Setting the refresh rate ................7/17Preset Timing Table .......................8/17
SlimView 52715" TFT LCD Color Monitor1. Introduction2. Safety Information1/17BACKNEXTThis manual contains instructions for installing and operating Slimview S527.Slimview S527 is a highly ergonomic color display unit.• 15" viewable XGA LCD• Supporting full scan flicker-free picture quality• With On Screen Display menus for user control• 100-240V AC input voltage• VESA DPMS (Display Power Management Signalling)• VESA DDC1/2B compatibilityThis Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following:Do not place anything wet on the monitor or the powercord. Never cover the ventilation openings with anymaterial and never touch them with metallic or inflammable materials.Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°CHumidity : 30~80RH
SlimView 52715" TFT LCD Color Monitor2/17BACKNEXTBe sure to turn the monitor off before plugging thepower cord into the socket. Make sure that the powercord and the other cords are securely and rightlyconnected.Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement.Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface.Do not use a solvent, such as benzene, to clean the monitor, as it will damage the LCD surface.
SlimView 52715" TFT LCD Color MonitorCleaning and Maintenance • To avoid risk of electric shock, do not disassemble the display unit cabinet. Theunit is not user-serviceable. Remember to unplug the display unit from thepower outlet before cleaning.• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do notuse thinner or benzene, abrasive cleaners or compressed air.• Do not wipe the screen with a cloth or sponge that could scratch the surface.• To clean your antistatic screen, use water and a special microfiber screencleaning tissue used in optical lens cleaning, or lightly dampen a soft, cleancloth with water or a mild detergent.• If the instructions above do not help in removing stains, contact an authorizedservice agent. 3/17BACKNEXT
SlimView 52715" TFT LCD Color Monitor4/17BACKNEXTThe following items should be found in the packaging.Above power cord can be changed upon different voltage areas. Pleasecontact your dealer if anything is missing or damaged.3. Installing the monitor3-1. Packing List!UKAmerican/CanadaJapanAustraliaKoreaEuropeSouth AfricaPower cordSignal cableAC/DC Power adapterCompact Disc
SlimView 52715" TFT LCD Color Monitor5/17BACKNEXT3-2. Selecting a suitablelocation3-3. Connecting the monitor• Place the monitor at least 30cm from other electrical or heat-emittingequipment and allow at least 10cm on each side for ventilation.• Place the monitor in a position where no light shines directly onto or isreflected on the screen.• To reduce eye strain, avoid installing the display unit against a brightbackground such as a window.• Position the monitor so that the top of the screen is no higher than eye level.• Position the monitor directly in front of you at a comfortable reading distance(around 45 to 90cm) Before you start cabling your monitor, check that thepower is off on all units. To avoid any possibility ofelectric shock, always connect your equipment toproperly earthed outlets.1. Insert the other 15-pin signal cable connector into the 15-pin VGA connectionon your computer and screw it down. 2. Plug the power cord connection to connection on the AC-DC Power adapter.3. Plug the jack of the AC-DC Power adapter connection to connection on monitor.4. Plug the other end of the power cord to your computer's main supply or to a100V-240V earthed electrical outlet.5. Turn on the monitor using the power switch and check that the power LED ison. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section ofthis guide.!!
SlimView 52715" TFT LCD Color Monitor6/17BACKNEXT6. Turn on the power to the computer. The picture will appear within about 10seconds. Adjust the picture to obtain optimum picture quality. See sectionAdjusting the picture in this guide for more information.
SlimView 52715" TFT LCD Color Monitor7/17BACKNEXT3-4. Setting the refreshrate Follow the instructions below to set your refresh rate in Windows 98.1. Go to the configuration window(Start-Settings-Configuration window).2. Double click on the ‘Display’ icon.3. Click on the ‘Settings’ tab.4. Click on the ‘Advanced’ button.5. Click on ‘Adapter’ and select 60Hz from the list.6. Click on ‘Apply’ to accept the selected value.LED Indicator Power Switch
SlimView 52715" TFT LCD Color MonitorNo.12345678Resolution720 x 400640 x 480640 x 480800 x 600800 x 6001024 x 7681024 x 7681024 x 768Horizontal Frequency31.5 KHz31.5 KHz37.9 KHz37.9 KHz46.9 KHz48.4 KHz56.5 KHz60.0 KHzRefresh rate70.1 Hz59.9 Hz72.8 Hz60.3 Hz75.0 Hz60.0 Hz70.1 Hz75.0 HzPreset Timing Table If the signal from the system doesn't equal to the preset timing mode, adjustthe mode with reference to the user guide of videocard because the screenmay not be displayed.The recommended setting is a resolution of 1024x768 and a refresh rate of 60Hz.8/17BACKNEXT!
SlimView 52715" TFT LCD Color Monitor4. Adjusting the picture9/17BACKNEXTYou can adjust the screen display by using the buttons located below thescreen.
SlimView 52715" TFT LCD Color Monitor10/17BACKNEXT1. Push the MENU button to call the OSD to the screen. The resolution andfrequency are displayed at the top of the menu box for your information.The resolution is displayed only when the monitor works in the presetmode.2. Push the or button to choose the item you want to adjust. The selecteditem is highlighted.3. Push the SELECT button to adjust the highlighted item. 4. Use the or button to adjust the selection.5. Push the SELECT button to return to the previous menu if you are in asubmenu.6. The display unit automatically saves the new settings in 1 second after yourlast adjustments and the menu disappears. You can also push the MENU buttonto make the menu disappear.AUTO ADJUSTPush the button SELECT (AUTO) to adjust the shape of screenautomatically.BRIGHTNESS Use the button to select the brightness adjustment. Adjust with or button.CONTRASTUse the button to select the contrast adjustment. Adjust with or button.4-1. Using the On ScreenDisplay 4-2. Direct access buttonsSELECTSELECTSELECT!
SlimView 52715" TFT LCD Color Monitor11/17BACKNEXT4-3. OSD AdjustmentsYou can play the moviefile to see how to adjustthe picture image byclicking each icon or titlehereunder.The OSD adjustments available to you are listed below.BRIGHTNESSAdjusts the brightness of the screen.CONTRASTAdjusts the contrast of the screen.H-POSITIONAdjusts the horizontal position of the entire screen image.V-POSITIONAdjusts the vertical position of the entire screen image.CLOCK (WIDTH)Adjusts the horizontal size of the entire screen image.CLOCK-PHASEAdjusts the noise of the screen image.AUTO ADJUSTAdjust the shape of screen atomatically.COLOR CONTROLColor temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish.
SlimView 52715" TFT LCD Color Monitor12/17BACKNEXTThere are three color settings available: Mode 1(a cool white), Mode 2(awarm white) or USER. With the USER setting you can set individualvalues for red, green and blue.INFORMATIONInformation shows the horizontal and vertical frequency of your display unit. The Information menu lists modes which are preset at the factory and modes which have been defined by user. It also shows you the mode your display unit is currently operating in. you can set the display mode (frequency and refresh rate) in Windows.LANGUAGEYou can select the language in which adjustment menus are displayed. The following languages are available: English, French, German, Italian, Spanish, Swedish, Finnish, Danish, Portuguese and Japanese or Korean.OSD ADJUSTYou can adjusts the OSD menu's horizontal or vertical position on the screen. You can also adjust display time of the OSD menu from 5 to 50 seconds.TEST PATTERNDisplays internal test pattern.The Clock Phase may not be optimized when the input timing is notcomply with VESA standard timing. In order to get the optimized resultof Auto Adjust Function, it is recommended to display bright color imageon the entire screen before proceeding Auto Adjust Function.!
SlimView 52715" TFT LCD Color MonitorIf the power management function of your computer is enabled, your monitorturns on and off automatically. You can control power management features fromyour computer.Your computer may have power management features which enable the computeror monitor to enter a power saving mode when the system is idle. You canreactivate the system by pressing any key or moving the mouse.The power button does not disconnect the monitor from the mains. The onlyway to isolate the monitor completely from the mains supply is to unplug themains cable.13/17BACKNEXT5. Display power managementReducing powerconsumptionPower consumption40 W10 W5 W0 WModeNormalSuspendoffUnpluggedLEDGreenGreen/Orange blinking (0.5sec.)OrangeNot illuminated!
SlimView 52715" TFT LCD Color Monitor6. Troubleshooting14/17BACKNEXTProblemBlank screenError message:Video mode notsupportedThe display does not enter power managementmodePossible solutionIf the power LED is not lit, push the Soft power switch or check theAC cord to turn the monitor on. If the display unit is poweredthrough the computer, check that the computer is switched on.The display unit might be in standby mode. Push one of thekeyboard keys. Check that the keyboard is properly connected tothe computer.Check that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. If the connector isloose, tighten the connector's screws.Check that the power cable is correctly connected to the display unitand to the power outlet. Check the resolution and the frequency on the video port of yourcomputer.Compare these values with the data in the Preset Timing Table.The video signal from the computer does not comply with VESADPMS standard. Either the computer or the graphics adapter is notusing the VESA DPMS power management function.If your monitor is not functioning properly, you may be able to solve the problemby reading followings.
SlimView 52715" TFT LCD Color Monitor15/17BACKNEXTPossible solutionCheck that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. Try another colortemperature. Adjust the picture characteristics as described in the sectionAdjusting the picture.A problem with your graphics adapter or display unit. Contact yourservice representative.Check that the display resolution and frequency from your PC orgraphic adapter is an available mode for your monitor.In your PC, you can check through Control panel, Display, Settings.If the setting is not correct, use your computer utility program tochange the display settings.ProblemColor defectsSize, position,shape or qualityunsatisfactoryDuplicatedimagesImage is notstable
SlimView 52715" TFT LCD Color Monitor16/17BACKNEXTContacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible.Unplug the display unit from the power outlet and contact a service agent when:• The monitor does not operate normally according to the operating instructions.• The monitor exhibits a distinct change in performance.• The monitor has been dropped or the cabinet has been damaged.• The monitor has been exposed to rain, or water or liquid has been spilled ontothe monitor.
SlimView 52715" TFT LCD Color Monitor17/17BACK15"viewable, DiagonalDot pitch 0.297 mm, AM-TFT 180cd/m2(Min.), 200cd/m2(Typ.)40msec304 X 228 mm16,7 million colors (with dithering)R.G.B Analog, 15 pin D-subHorizontal : 31.0 to 68.7KHzVertical : 44 to 75Hz94.5 MHz1024X768@75HzDC 12V/5V 2.0A 40WVESA DPMSVESA DDC 1/2BBRIGHTNESS, CONTRAST, H. POSITION, V. POSITION, CLOCK, CLOCK-PHASE, AUTO ADJUST, COLOR CONTROL,INFORMATION, LANGUAGE, OSD ADJUST, TESTTCO'95FCC Class B, CE,cULus, TÜV-GS, NEMKO, DEMKO, FIMKO, SEMKO5 ~ 35O C4.8Kg unpacked, 6.7Kg packed442 X 482 X 256 mmLCDBrightnessResponse TimeDisplay areaNumber of colorInput signalsFrequency rateMaximum bandwidthMaximum resolutionInput voltagePower consumptionPower managementPlug & PlayOSD menuErgonomics,Safety and EMCOperating TemperatureWeightDimensions (W X H X D mm)• Specification is subject to change without notice for performance improvement.7. Specifications

Navigation menu