Hyundai IBT PT42AH000 42” PDP Monitor User Manual 1

Hyundai IBT Corp. 42” PDP Monitor 1

Contents

Users mnanual 1

FCC ID : PJIPT42AH000 ATTACHMENT E-1. - USER’S MANUAL - REPORT NO. : HCT-F03-1103 HYUNDAI C–TECH
HyundaiPlasma DisplayPT42AH000User’s Guidewww.hyundaiQ.comP/N 632 0236 102 Rev.02
GENERAL INFORMATIONGENERAL INFORMATIONU.S.A.U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCYINTERFERENCE STATEMENT INFORMATION TO THE USERNOTE : This equipment has been tested and found to comply with the limits for aClass B digital device pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet of a circuit different from that to which thereceiver is connected.• Consult the dealer or an experienced radio/TV technician for assistance.Changes or modification not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.Connecting of peripherals requires the use of grounded shielded signal cables.Kind of equipment : PDP TVSafety : IEC60065:1998 / EN60065:1998EMC : EN 55022 : 1998+A1:2000, EN 55024 : 1998+A1:2001EN 61000-3-2 : 2000 / EN 61000-3-3 : 1995+A1:2001EN 55013:1990+A12:1994+A13:1996+A14:1999Ty pe-Designation : PT42AH000WE ImageQuest CO., LTD.Ami-ri Bubal-Eub Ichon-Si Kyungki-Do467-860 KOREAdeclare under our sole responsibility that the product:to which this declaration relates is in conformity with thefollowing standard(s) or other normative document(s)following the provisions of the Low Voltage Directive 73/23/EEC,93/68/EEC and the EMC Directive 89/336/EEC.KOREA /November 26, 2003 HONG KI, KIMPlace and date of issue) (Name and signature of authorized person)Accredited testlaboratory:TÜV RheinlandAm Grauen Stein51105 KölnDECLARATION OF CONFORMITYEN55020:1994+A11:1996+A13:1999+A14:1999+A12:1999
GENERAL INFORMATIONSafety Precaution ............................................................. 5Contents of the Package ................................................... 7Separately Sold Products ................................................ 7Parts Names and Functions ............................................ 9Remote Control ............................................................... 11General InformationHYUNDAI PLASMA DISPLAY
GENERAL INFORMATIONHYUNDAI Plasma Display PT421/421H65GENERAL INFORMATIONSafety Precaution The contents of this section are provided for the safety of users and their property.Please read the contents before using.Safety instructions are divided into “warning” and “alert”. Their meanings are as follows.This pictorial sign is used when a caution is needed on a potentially dangerous items and operations.Warning : When there is a possibility of serious injury or death upon violation of the displayed instruction.Alert : When there is a possibility of slight injury or product damage upon violation of the displayed instruction.Firmly plus the power cord sothat it does not pull out.- Unstable connection may cause fire.Do not use damaged powercord or plug, or loose outlet. - They may cause electric shock or fire. Never touch power plug withwet hand. - They may cause electrocution. Do not put water bowl, vase,candle, bug repellant smoke,cigarette, small metal palette, or heavy thing on a PDP. - It may cause electric shock or fire andalso heavy things may cause injurywhen it falls. Do not install in a place wherethere are oil, smoke, orhumidity, or where water issprinkled or in a car. - They may cause electric shock or fire. Do not install on an unstableplace or small support. - If a child touch a PDP on such placewhile playing, PDP may fall and injurythe child. WarningDo not use or store flammablespray or inflammables in aplace near a PDP. - They may cause explosion or fire.Do not install a PDP in abookshelf, closet, or a placewhere air is not well circulated. - Fire may be caused due to the rise ofinternal temperature. Bend an antenna line downwardon a point where the line passthrough from outdoor to indoorso that rainwater may notpenetrate indoor.- If raindrop gets into a PDP, fire or electricshock may be caused. Never separate, fix, or modifyat user’s discretion. - When there is a need for fixing, call aservice center. Fire or electric shockmay be caused. Do not put a metallic object likechopstick, wire, or puncher orinflammables like paper or amatch in a vent, headphonejack, or AV jacks of PDP. - Electric shock or fire may be caused. When a PDP producesabnormal noise, burning smell,or smoke, unplug the PDPimmediately and call a servicecenter. - Electric shock or fire may be caused.Unplug when you do not useyour PDP for long time. - If dust is stacked on a PDP, electricshock or fire may be caused from heat,fire, or deterioration of insulation. When moving a PDP, 2 or morepeople are advised to carry it. - Injury or damage may be caused when aPDP falls. Consult a service center orcustomer service for insidecleaning about once a year. - When dust is collected inside a PDP forlong time, fire or malfunction may becaused. Alert
GENERAL INFORMATIONGENERAL INFORMATIONHYUNDAI Plasma Display PT421/421H7 8Contents of the Package To purchase additional parts, consult a distributor or selling agent. Separately Sold Products If you want to purchase separately sold products, consult a service center, electronics shops,or parts seller.Desk type speakerDesk type stand Desk type speakerstand Fixed wall mount frame Adjustable wall mount frame Ceiling mount frame1203475869PIPMENUTV/AVINFOMUTEPREVIEWSOUNDMTSVOLUMESLEEPON/OFFHIGH/LOW PROTECTION PC.AUTOCAPTIONTTX/MIX INDEXLIST/FLOFSTOREHOLDSIZE REVEALSUB PAGESOURCESIZE SWAPCHANNELPICTURE ASPECTSTILLPOWERUKAmerica/CanadaJapanAustraliaKoreaEuropeSouth AfricaUser’s Guide Power CordRemote Control/2 Batteries(1.5V AAA) Antenna CableSpeaker CablesPC signal Cable Scart cable S-video cable Component(Y, Pb, Pr)Cable Composite(Video & Audio)CableDVI PC video(digital) cable
GENERAL INFORMATIONParts Names and Functions Front View9GENERAL INFORMATIONHYUNDAI Plasma Display PT421/421H10Remote sensor and power LED. Point the remote control toward here.It displays standby or operation status.Menu button Use this button to display or exit frommenus.Source button (Page 11~15)Use this button to switch among inputsconnected to PDP. Channel buttonsVolume buttonsPower button:Use this button to turn on or off a PDP Rear ViewSub woofer outputConnect to the Sub wooferspeakerRS-232 input terminal Connect to the RS-232terminal of a PC for theservice check.*For the control methodusing this terminal, consultan authorized PDP monitordealer. ❸❸Phone Jack Extend an RS-232 input. ❹❹DVI input terminal DVI TerminalPC/DVI Audio inputterminalConnect to the audio outputterminal of a PC.❻❻D-SUB input terminal Connect to the video outputterminal of a PC. ❼❼Audio input terminal forDVD Connect to the audio outputterminal of DVD player. ❽❽Component inputterminal for DVD or DTV Connect to the Componentoutput terminal of DVDplayer/DTV receiver.Audio input terminal forDTV ComponentConnect to the audio outputterminal of DTV receiver.Component inputterminal for DTV Connect to the Componentoutput terminal of DTVreceiver for Digitalbroadcast.S-video input terminal Use this for the better videoquality than video inputterminal.Video Composite inputterminal for VCRConnect to the CompositeVideo output terminal ofVCR or DVD player.Audio input terminal forVCR Connect this when S-videoor Composite Video inputs. Video outputAudio outputSCART input terminal For Composite Video inputsand audio inputs used inthe European area.SCART 2 input terminalFor Composite Video/Audioor R,G,B inputs used in theEuropean area.ANT. input Power input terminal Power cord is connectedhere. Speaker terminal Stand assembly Speaker assembly Carrying handles Screw hole for fixing on awall        
CONNECTIONSCONNECTIONSConnecting VCR, Cable/Satellite Receiver Connection Method Connect Video/S-Video cable between Video/S-Video output terminal of VCR or Cable/Satellitereceiver and Video/S-Video input terminal of PDP.(Connect cables and terminal in the same colors) Connect Audio cable (left:white color, right:red color) between Audio output terminal of VCR orcable/satellite receiver and Audio input terminal of PDP. (Connect cables and terminal in the same colors) How to WatchVCR/Cable ReceiverHYUNDAI Plasma Display PT421/421H181712POWER CableAUDIO CableVIDEO CableorUse S-video cables for better picture quality. Connecting a DVD player Connection Method Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DVD player and the input terminals(Y, Pb, Pr) of DVD(480i/480p/720p/1080i) on the rear of PDP. (Connect cables and terminal in the same colors) Connect Audio cable between Audio output terminal of DVD player and Audio input terminal for DVDAudio on the rear of PDP. (Connect cables and terminal in the same colors) How to WatchDVD PlayerVIDEO(Y, Pb, Pr) CableAUDIO Cable1212
CONNECTIONSHYUNDAI Plasma Display PT421/421H2019CONNECTIONSConnecting DTV(Digital Broadcast) Receiver See The CamcoderConnection Method Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DTV Receiver and the inputterminals(Y, Pb, Pr) of DTV(480p/720p/1080i) on the rear of PDP. (Connect cables and terminal inthe same colors) Connect Audio cable between Audio output terminal of DTV Receiver and Audio input terminal forDTV Audio on the rear of PDP. (Connect cables and terminal in the same colors) How to Watch 1212DTV ReceiverVIDEO(Y, Pb, Pr) CableAUDIO CableConnection Method Connect Video cable between Video output terminal of Camcoder/Game player and Video inputterminal of PDP.(Connect cables and terminal in the same colors) Connect Audio cable (left:white color, right:red color) between Audio output terminal of Camcoder/Game player and Audio input terminal of PDP. (Connect cables and terminal in the same colors) How to Watch12Game Player CamcorderAUDIO Cable
CONNECTIONSCONNECTIONSHYUNDAI Plasma Display PT421/421H2221Resolutions Supported in PC * Recommend Resolution is 1024x768@60HzResolution31.4737.8631.4737.8637.5043.2731.4737.8848.0846.8853.6749.7248.3660.0268.68Vertical frequency70.0985.0859.9472.8075.0085.0170.0860.3272.1875.0085.0674.5560.0075.0385.00640 x 350720 x 400800 x 600832 x 6241024 x 768640 x 480Horizontal frequencyConnecting to a PC(DVI, D-SUB) Connection Method Connect PC signal cable(15 pins D-sub) between output terminal of PC and the D-sub input terminalof a PDP. In case of DVI(Digital) cable, connect it between output terminal for DVI(DIGITAL) of PCand input terminal for DVI of PDP. Connect Audio cable between Audio output terminal of PC and Audio input terminal for PC of PDP.(Connect cables and terminal in the same colors) When Using As a PC Monitor1212AUDIO CableD-SUB Cable(15pin)DVI Cable(DIGITAL)or
CONNECTIONSHYUNDAI Plasma Display PT421/421HScart Pin SpecificationsIf you wish to connect other equipment via the scart connectors on your TV, contact your dealer or aqualified technician to wire the A/V cable as illustrated below.24CONNECTIONS23VCRDVDVideo Game DeviceVideo Disc PlayerSatellite ReceiverSET TOP BOXScart Connection to the External Input/OutputConnection Method This end can be fitted with : A Scart connectorIf you have a second VCR and wish to copy casettes tape. Connect the source VCR to “F Scart” andthe target VCR to “H Scart” so that you can redirect the signal from “H Scart” to “F Scart”.-How to Watch1212TV IN TV OUTVIDEO(CVBS) + Audio(L/R)F SCART• F Scart input : RGB, CVBS • F Scart output : CVBS(TV Out)• H Scart input : CVBS • H Scart output : CVBS(Monitor Out)PIN SIGNAL1Audio Output R2Audio Iutput R3Audio Output L4Audio Iutput GND5Blue Iutput GND6Audio Iutput L7RGB Blue Input8Switching Voltage input9Green Iutput GND10 -11 RGB Green Iutput PIN SIGNAL12 -13 Red Iutput GND14 -15 RGB Red Input16 RGB Blinkng Signal Input17 Video Output GND18 Video Iutput GND19 Video Output (CVBS)20 Video Iutput (CVBS)21 Scrat Connetor GND
How to Select Picture Mode ........................................... 27How to Set the User Picture ............................................ 28How to Set Blue Screen ................................................. 29How to Set Film Mode ................................................... 30How to Select Color Temperature ................................... 31How to Set PIP [Mode] .................................................... 32How to Set Multi-Screen [Input Source/Position/Size] .... 33Noise Reduct .................................................................. 36Picture SetupHYUNDAI PLASMA DISPLAY
HYUNDAI Plasma Display PT421/421H27 28PICTURE SETUPPICTURE SETUPHow to Set the User PictureUsers can manually adjust the picture in their own ways. Press Menu button.Menu items appear on the screen. Press Up and Down buttons to move to “PICTURE” icon.Press Left and Right button to select “MODE”.Press Left and Right button, then the menu changes in order below. STANDARD DYNAMIC MOVIEMILD USER Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears. STANDARD : For general contents. It fits most video contents. DYNAMIC : For a clear display. MOVIE : For movies. MILD : For a soft display. USER : When the user wants to set the values see the next page123PICTUREMODEPICTURE CUSTOMBLUE SCREENFILM MODECOLOR TEMPPIPNOISE REDUCTSTANDARD OFFOFFSTANDARDMOVE+ 000SELECT MENUPICTUREMODEPICTURE CUSTOMBLUE SCREENFILM MODECOLOR TEMPPIPNOISE REDUCTSTANDARD OFFOFFSTANDARDMOVE+ 000SELECT MENUEXITPress Menu button.Menu items appear on the screen. Press Up and Down buttons to move to “PICTURE” icon. Press Left and Right button to select “PICTURE”Press Up and Down button to move to “PICTURE CUSTOME”. Press Left and Right button to select “PICTURE CUSTOME”.Picture Custome menu appears. Choose item, then Press Left and Right button to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears. CONTRAST : Adjust the brightness and darkness of object and background. BRIGHTNESS : Adjust the brightness of the entire picture. SHARPNESS : Adjust clarity of outline of objects. COLOR : Adjust colors into deeper or lighter colors. TINT : Adjust colors naturally. (The NTSC only mode it operates)1Setting of Color and Tint is not supported in PC, DVI and DTV input modes. PICTUREMENUMENUPICTUREMODEPICTURE CUSTOMBLUE SCREENFILM MODECOLOR TEMPPIPNOISE REDUCTSTANDARD OFFOFFSTANDARDMOVE+ 000SELECT MENUPICTUREMODEPICTURE CUSTOMBLUE SCREENFILM MODECOLOR TEMPPIPNOISE REDUCTSTANDARD OFFOFFSTANDARDMOVE+ 000SELECT MENUPICTURE CUSTOMCONTRASTBRIGHTNESSSHARPNESSCOLORMOVESELECT MENU08007005005012345EXITHow to Select Picture Mode Users can adjust picture mode automatically accrding to the input mode(TV, Vedio, S-Video, F/H Scart,DVD, DTV).How To Directly Select Picture Mode : Press button. - Users can select STANDARD DYNAMIC MOVIE MILD USER, when the input mode is TV,S-Vedio, F/H Scart, DVD, DTV. - Users can select STANDARD LOW(Text Mode) HIGH(Movie), when the input mode is PC orDVI.
PICTURE SETUPHYUNDAI Plasma Display PT421/421HHow to Set Film Mode .TQKSMZ࿖ၦ ຫමၡ ။વ໓ၕ ໓඗ዻ઎ གྷᅯዻཇ ઠဨ࿝ ໕ႜዻཊགྷ࿼29 30PICTURE SETUPHow to Set Blue Screen Press Menu button.Menu items appear on the screen. Press Up and Down buttons to move to “PICTURE” icon. Press Left and Right button to select “PICTURE”.Press Up and Down button to move to “BLUE SCREEN”. Press Left and Right button to “ON/OFF”.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears. PICTUREMODEPICTURE CUSTOMBLUE SCREENFILM MODECOLOR TEMPPIPNOISE REDUCTSTANDARD OFFOFFSTANDARDMOVE+ 000SELECT MENUPICTUREMODEPICTURE CUSTOMBLUE SCREENFILM MODECOLOR TEMPPIPNOISE REDUCTSTANDARD OFFOFFSTANDARDMOVE+ 000SELECT MENUMENU1234EXITPress Menu button.Menu items appear on the screen. Press Up and Down buttons to move to “PICTURE” icon. Press Left and Right button to select “PICTURE”.Press Up and Down button to move to “FILM MODE”. Press Left and Right button to “ON/OFF”.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears. PICTUREMODEPICTURE CUSTOMBLUE SCREENFILM MODECOLOR TEMPPIPNOISE REDUCTSTANDARD OFFOFFSTANDARDMOVE+ 000SELECT MENUPICTUREMODEPICTURE CUSTOMBLUE SCREENFILM MODECOLOR TEMPPIPNOISE REDUCTSTANDARD OFFOFFSTANDARDMOVE+ 000SELECT MENUMENU1234EXIT
HYUNDAI Plasma Display PT421/421HHow to Select Color TemperatureUsers can adjust Color as users want. How to Set PIP [Mode]This is to set PIP(Picture In Picture) mode or Twin mode.31 32PICTURE SETUPPICTURE SETUPPICTUREMODEPICTURE CUSTOMBLUE SCREENFILM MODECOLOR TEMPPIPNOISE REDUCTSTANDARD OFFOFFSTANDARDMOVE+ 000SELECT MENUPICTUREMODEPICTURE CUSTOMBLUE SCREENFILM MODECOLOR TEMPPIPNOISE REDUCTSTANDARD OFFOFFSTANDARDMOVE+ 000SELECT MENUMENU1234EXITPICTUREMODEPICTURE CUSTOMBLUE SCREENFILM MODECOLOR TEMPPIPNOISE REDUCTSTANDARD OFFOFFSTANDARDMOVE+ 000SELECT MENUPICTUREMODEPICTURE CUSTOMBLUE SCREENFILM MODECOLOR TEMPPIPNOISE REDUCTSTANDARD OFFOFFSTANDARDMOVE+ 000SELECT MENUPIPMODESOURCESWAPSIZEPOSITIONCHANNELOFFTVSWAPLARGERIGHT DOWN037MOVESELECT MENUMENU123456Press Menu button.Menu items appear on the screen. Press Up and Down buttons to move to “PICTURE” icon. Press Left and Right button to select “PICTURE” icon.Press Up and Down button to move to “COLOR TEMP”. Press Left and Right button, then Mode changes in order below. STANDARD COOL WARM Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears. STANDARD : Colors for general picture. COOL : Cool colors with bluish tone. WARM : Warm colors with reddish tone. Press Menu button.Menu items appear on the screen. Press Up and Down buttons to move to “PICTURE” icon. Press Left and Right button to select “PICTURE” icon.Press Up and Down button to move to “PIP”. Press Left and Right button to select “PIP”.PIP Menu appears. Press Up and Down button to move to “MODE”. Press Left and Right button, then Mode changes in order below. PIP TWIN OFF After setting this, go to step 7 to set the SOURCE.TWIN : To watch two screens in halfand half.PIP : To watch the Sub screen in amain screen at once.55IIQQVV55IIQQVV;;]]JJ;;]]JJ

Navigation menu