Hyundai IBT LT17AW000 17" LCD Monitor User Manual 1

Hyundai IBT Corp. 17" LCD Monitor 1

Contents

Users Manual 1 of 2

FCC ID : PJILT17AW000 REPORT NO. : HCT-F04-0603 HYUNDAI C-TECH ATTACHMENT E -1. - USER'S MANUAL -
HYUNDAI LCD TV HQL170WR/200NRFCC InformationUser InstructionsThe Federal Communications Commission Radio Frequency Interference Statement includes thefollowing warning :NOTE : This equipment has been tested and found to comply with the limits for a Class B digital devicepursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television receptions, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures :• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.• Consult the dealer or an experienced radio/TV technician for assistance.User InformationChanges or modifications not expressly approved by the party responsible for compliance could voidthe user’s authority to operate the equipment.Connecting of peripherals requires the use of grounded shielded signal cables.Kind of equipment : LCD TVSafety : EN 60950 : 2000EMC : EN 55022 : 1998+A1 : 2000 Class BEN 55024 : 1998+A1 : 2001EN 61000-3-2 : 2000, EN 61000-3-3 : 1995+A1 : 2001Type-Designation : LT17AW000 / LT20A0000WE HYUNDAI ImageQuest CO., LTD.Ami-ri Bubal-Eub Ichon-Si Kyungki-Do467-860 KOREAdeclare under our sole responsibility that the product:to which this declaration relates is in conformity with thefollowing standard(s) or other normative document(s)following the provisions of the Low Voltage Directive 73/23/EEC,93/68/EEC and the EMC Directive 89/336/EEC.KOREA /MAY. 15, 2004 HONG KI, KIMPlace and date of issue) (Name and signature of authorized person)Accredited testlaboratory:TÜV RheinlandAm Grauen Stein51105 KölnDECLARATION OF CONFORMITY
HYUNDAI LCD TV HQL170WR/200NRImportant Tips Image Retention effect(Image Sticking) 1. Cause : - Image Retention Effect could be come from displaying a still picture in certain period of time with ata certain area continuously, as the feature of LCD TV panel.- This is the same matters to other companies' LCD TV panel products, too.2. Preventation :- To avoid this matter, use the product after reducing brightness and contrast, especially a still imageis displaying for a long time. (Example : Contrast 25, Brightness 25 - See the page 34)Once Image retention occurs, change the mode into Video mode which displays more motionpictures. It will help reduce this matter, but cannot completely eliminate once it occurs. It makes the screen’s brightness worse as displaying a fixed pattern often.3. Solution :- The temporary image sticking would decrease with displaying Full-White pattern after 10 hours.- The permanent image sticking couldn’t take off under the latest technology even though being in itsmanufacturer.4. Notice :- It is very important to notify every buyer/customer this information and All Branches/Buyers/Customers should be fully aware of this.- Image Sticking in LCD TV panel products couldn’t get the support from a manufacturer, and does notcome under the warranty.Second Tips • Pixel Defect :LCD TV panel is made of a group of refined pixels (cells). The Panel, in which 99.9% of pixels haveapproved, is a normal product. Therefore, only a few of abnormal pixels may appear, however, thishas no influence upon LCD TV panel performance.* Specification on ‘dead pixel’ of LCD panel applies to ISO13406-2 Standard.Image Sticking PrecautionStill Image Wide/4:3 in mortion Image • Precaution :- Image Sticking could be come from Still Image and Boundary line for a long time display andBrightness gap in Boundary.- This Matter(Image Sticking) is same thing under the other LCD TV's Company.- Still Image/Letter in watching TV also will be effect to Image sticking.*This matter(Image Sticking) is out of warranty.Wide, 4:3 aspect ratioBox or Still image
HYUNDAI LCD TV HQL170WR/200NRFeatures Table of ContentsGeneral InformationSafety Precaution .................................................................5Contents of the Package ....................................................11How to Use the Kensington Security Slot ............................12How to Use the Rear Cap and Cable Holder .........................13How to Adjust the View Angle .............................................14How To Install Wall Mount Support .....................................15How To Install Wall Mount Frame .......................................16Parts Names and Functions ..............................................17Remote Control ................................................................. 19Connections Connecting Indoor/Outdoor TV Antenna(UHF/VHF) ...............23Connecting to the Antenna Input Connectionon the External Equipment ..................................................24Before connecting the video connections to external devices....25Connecting a VCR, Cable/Satellite Receiver ........................26Connecting a DTV Receiver or DVD Player ...........................27Playing Back a Tape Recorded On a Camcorder .................28Connecting to a PC .............................................................29Resolutions Supported in PC ...............................................30Picture SetupHow to Select the Picture Mode ..........................................33How to Set the Desired Picture ...........................................34How to Set Noise Reduction ................................................35How to Set PIP [Mode] ........................................................36How to Set POP [Mode] ......................................................36How to Set Multi [Mode] .....................................................37How to Select the Aspect Ratio ...........................................39Sound SetupHow to Select the Volume, Balance and Mute .....................41How to Set the Audio Mode(Equalize) ..................................42How to Set the Desired Audio .............................................43How to Listen to Stereo Sound / SAP ..................................44How to Select the Surround ................................................44How to Select the AVC(Auto Volume Control) .......................45PC SetupHow to Select the Color Mode .............................................47How to Select the Auto Adjust .............................................48How to Set the Geometry ....................................................49Channel SetupHow to Store Channel Automatically ...................................51How to Set Manual Store ....................................................52Option SetupChoosing Your Language ....................................................55How to Set OSD(On-Screen-Display) Display Time ..............56How to Select OSD the Background ....................................57How to Set Sleep Time .......................................................58How to Set Clock ................................................................59How to Set On /Off Time .....................................................60Displaying Information ........................................................62How to View Closed Captions .............................................63How to Select the V-Chip Control ........................................64How to Set the Desired V-Chip Control ................................65AppendixGlossary .............................................................................69Troubleshooting ..................................................................71Care and Cleaning ..............................................................73Product Specifications ........................................................74A Wide Array of Screen SettingsYou can choose different screen settings depending on the type of program you are watchingor the surrounding conditions (the lighting or the outside weather conditions).You can switch among Dynamic, Mild and Standard, or you can configure the screen settingsfor yourself.A Wide Array of Sound SettingsYou can choose an optimal sound setting for the type of program you are watching.You can switch among Standard, Music, Movie and News, or you can configure the settings foryourself.V-ChipThe V-Chip feature locks out programs that are deemed inappropriate for children.Closed Captions FunctionThis is to displays the closed captions that are broadcast with certain TV shows.Surround Audio FunctionYou can listen to dynamic and surround sound only with ordinary speakerAuto ON/OFF Function This function allows you to turn on/off your LCD TV at the preset time.
6GENERAL INFORMATIONHYUNDAI LCD TV HQL170WR/200NR5GENERAL INFORMATIONWARNINGWARNINGSafety instructions are divided into “Warning” and “Alert”. Their meanings are as follows.This icon is intended to alert the user to the presence of potential danger and important operating instructions. Warning : When there is a possibility of serious injury or death if not observed.Alert : When there is a possibility of slight injury or product damage if not observed.Safety Precaution The contents of this section are provided for the safety of users and their property.Please read the instructions carefully before using.Do not connect multiple electricalappliances to a single outlet.- It may cause a fire due to overheating from theoutlet.Do not put a water bowl, filled withliquids such as vases, candle, bugrepellant smoke, cigarette, plants,or heavy thing on the LCD TV. - It may cause electric shock or fire and alsoheavy things may cause injury when they fall. Do not install on an unstable placeor small support. - This may cause the LCD TV to fall, resulting inserious injury to a child or adult.Do not use or store a flammablespray or inflammable things near theLCD TV. - They may cause explosion or fire.Do not install the LCD TV in abookshelf, closet, or a place wherethere is poor air circulation. - Fire may be caused due to the rise of internaltemperature. Firmly plug in the powercord so that it does not pullout.- An unstable connection may causefire.Do not use a damagedpower cord or plug, or looseoutlet. - They may cause electric shock or fire. Please avoid touching the panelat the rear of LCD TV as it isproducing high temperature.- Direct contact with the hot surface maycause physical burns. Never touch the power plugor outlet with wet hands. - This may cause electric shock. If there is a persistent accumulationof dusts or water on the plug, pleasemake sure to wipe it off using a drycloth. - It may cause a fire or an electric shock.Do not install in a place where thereis oil, smoke, excessive humidity, orwhere water may be sprinkled,dripped, splashed on it. - This may cause electric shock or fire.
8GENERAL INFORMATIONHYUNDAI LCD TV HQL170WR/200NR7GENERAL INFORMATIONSafety instructions are divided into “Warning” and “Alert”. Their meanings are as follows.This icon is intended to alert the user to the presence of potential danger and important operating instructions. Warning : When there is a possibility of serious injury or death if not observed.Alert : When there is a possibility of slight injury or product damage if not observed.Safety Precaution ....................................Continued from previous pageThe contents of this section are provided for the safety of users and their property.Please read the instructions carefully before using.WARNINGWARNINGAny heat sources such as radiatorsand heat registers, etc. on or nearthe LCD TV.- It may cause a fire.Do not block ventilating slits.- Blocking the ventilation slits prevents inner heatfrom escaping, which may lead to a fire.Do not install the product on thefloor.- If it falls over, your child may be injured.Unplug the product during lightningor thunderstorms and never touchthe antenna cable.- It may cause a fire or an electric shock.Keep the remote control batteriesout of sight and out reach ofchildren. - If your child swallows a battery, see your doctorimmediately.Make the antenna cable loop at the entranceof the building. Any necessary action such asmaking the antenna cable loop at theentrance of the building should be taken toprevent rainwater on the outdoor antennacable from possibly running into the indoor.- If raindrop gets into the LCD TV, it may cause afire or an electric shock. Never attempt to open, fix, or modifythe LCD TV. - When there is a need for fixing, call a servicecenter. Fire or electric shock may be caused. Do not put a metallic object likechopstick, wire, or puncher orinflammables like paper or a matchin a vent, headphone jack, or AVjacks of the LCD TV. - Electric shock or fire may be caused. When the LCD TV produces abnormalnoise, burning smell, or smoke,unplug the LCD TV immediately andcall a service center. - Electric shock or fire may be caused.Ensure the power corddoesn’t trail across any hotobjects like a heater.- This may cause a fire or an electric shock.
HYUNDAI LCD TV HQL170WR/200NR10GENERAL INFORMATION9GENERAL INFORMATIONSafety Precaution ....................................Continued from previous pageThe contents of this section are provided for the safety of users and their property.Please read the instructions carefully before using.ALERTWARNINGLUBRICANTBenzeneAlcoholDo not allow children to climb orplay on the LCD TV. - If it falls over on children, it may cause seriousinjury.Do not place toys and cookies, etc.on the LCD TV, which may attractchildren’s attention. Children willclimb on the LCD TV to reachwhatever they have their eyes on. - If it falls over on children, it may cause seriousinjury.When cleaning the LCD TV, make sureto disconnect the power plug and usea dry, soft cloth for a cleanup.- Please avoid using chemicals such as wax,benzene, alcohol, thinner, mosquito spray,air freshener, lubricant or syntheticdetergent.When replacing batteries, makesure to match the batteries to the(+) and (-) marks in the batterycompartment.- Mismatching of polarities may result in internaldamage to batteries, fire due to leakage orcontamination. Always use the standard batteriesand avoid using old batteriestogether with new ones.- Otherwise it may result in internal damage tobatteries, fire due to leakage or contamination.In the event of damaging ordropping the product, switch off thepower and remove the plug.- Using a damaged product may cause an electricshock or a fire.- Contact your local service center.Unplug when you do not use yourLCD TV for a long time. - If dust is stacked on the LCD TV, electric shockor fire may be caused from heat, fire, ordeterioration of insulation. When moving the LCD TV, 2 or morepeople are advised to carry it. - Injury or damage may be caused when the LCDTV falls. Before moving your LCD TV, ensure toswitch off the power and unplug all theelectrical cords and the externalconnection cords such as an antennacable and other source connections, etc.- An electrical cord(s) may be damaged resultingin a fire or an electrical shock.Consult a service center or customerservice for inside cleaning aboutonce a year. - When dust is piled inside the LCD TV for a longtime, fire or malfunction may be caused. Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows.This icon is intended to alert the user to the presence of potential danger and important operating instructions. Warning : When there is a possibility of serious injury or death if not observed.Alert : When there is a possibility of slight injury or product damage if not observed.
HYUNDAI LCD TV HQL170WR/200NRGENERAL INFORMATIONGENERAL INFORMATION11 12Contents of the Package To purchase additional parts, consult a distributor or selling agent. Separately Sold Products If you want to purchase separately sold products, consult a service center, electronics shops, or parts seller.1203475869PIPMENUTV/AVINFOMUTEPREVIEWSOUNDMTSVOLUMESLEEPON/OFFHIGH/LOWPROTECTIONPC.AUTOCAPTIONTTX/MIX INDEXLIST/FLOFSTOREHOLDSIZEREVEALSUB PAGESOURCESIZESWAPCHANNELPICTUREASPECTSTILLPOWERUKAmerica/CanadaJapanAustraliaKoreaEuropeSouth AfricaPower CordAntenna CableRemote Control/2Batteries(1.5V AAA) User’s GuidePC signal Cable(D-SUB)S-video cable Audio Cable(DVD/DTV) Audio Cable(PC)Component(Y, Pb, Pr) Cable Composite(Video & Audio) CableHow to Use the Kensington Security Slot- This display unit supports a Kensington-type security device to secure your LCD TV. Kensington lock is notincluded.- To purchase and install the Kensington locking device, please refer to the following contact information.* Kensington Technology Group• Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289• Tel : +1 650 572 2700 • Fax : +1 650 572 9675• Web-site : www.kensington.comKensingtonsecurity slot
14GENERAL INFORMATIONHYUNDAI LCD TV HQL170WR/200NR13GENERAL INFORMATIONHow to Use the Rear Cap and Cable HolderThe Rear Cap and Cable Holder allow you to organize the connection cables on the rear of the product.1. 2. Connect your cables to the terminalsof the rear.3. Organize the connected cables neatlyusing the Cable Holder.4. -5OHow to Adjust the View AngleYou can adjust the angle of the view for the desired view angle.You can adjust any angle within a range of 30º to the left or right.You can adjust the tilt of the TV from -5º to 10º after the installation.10O30O30OCable Holder
16GENERAL INFORMATIONHYUNDAI LCD TV HQL170WR/200NR15GENERAL INFORMATIONHow To Install Wall Mount Support1. Caution1. Install on the vertical wall surface only.2. Do not install on the following places to protect the performance of LCD TV and to prevent malfunction.Near sprinkler Detector, Near heating devices, Places where vibration or shock may be applied , Near high voltage electric power line3. Install in a proper method with the structural materials of the wall.If the wall is not strong enough to stand weight of TV set, reinforce the wall surface before installation.4. Do not install within a wall.2. Parts configuration chart3. Angle AdjustmentThe angle of LCD TV may be adjusted from -15 degree to 15 degree. How To Install Wall Mount Frame4. Installation Method1. Unscrew screws fasted on 4 spots on the stand of LCD TV.2. Fasten the Fixing Panel assembly on the back of LCD TV asshown on the picture.3. Fix the Base Frame Assy on the wall with screws or nails.4. Hang the LCD TV assembled the Fixing Panel Assy on theBase Frame Assy. (If the LCD TV is lifted too much, thehanging Plastic may be separated)12347856150angle -150angle No angle130.0135.0Base frame assembly 4 screwsFixing Panel assembly
HYUNDAI LCD TV HQL170WR/200NRGENERAL INFORMATION17GENERAL INFORMATION18Rear ViewPower input terminalPower cord is connected here. ANT. input This allows you to connect your antenna.D-SUB input terminalConnect to the DTV Receiver with D-Sub terminal orto RGB output terminal of a PC. Component input terminal for DVD or DTVConnect to the Component output terminal of DVDplayer/DTV receiver. Audio input terminal for DVD or DTVConnect to the audio output terminal of DVDplayer/DTV receiver.S-video input terminal Use this for the better video quality than Compositevideo input terminal.Video and Audio Composite input terminal for VCRConnect to the Composite Video output terminal ofVCR or DVD player.Headphone JackConnect to the Headphone.Audio input JackConnect to the audio output terminal of PC.Scart input terminal - Not UseFor the European area.- Power Indicator Staus -Parts Names and Functions Front ViewSource buttonUse this button to switch among inputsconnected to the LCD TV. Menu button Use this button to display or exit from menus.Volume buttonsUse these buttons for your desired soundlevel. These buttons also serve as the cursorof Select/Adjust when in Menu mode.Channel buttonsUse these buttons to change channels. Thesebuttons also serve as the cursor of Down andUp buttons when in Menu mode.Power button Use this button to turn on or off the LCD TV. Remote sensor and power LED. - Point the remote control toward here.- It displays standby or operation status.SpeakerIndicatorRedGreenGreen blinkingStatusStand-byPower onRemote control
HYUNDAI LCD TV HQL170WR/200NRGENERAL INFORMATION20GENERAL INFORMATION19How to Insert Batteries in Remote Control *Battery type : 1.5V/BP-2KM(AAA/LR03G)Remote ControlPOWER/STANDBYUse this button to turn the TV set on or off.MUTEUse this button to turn the sound offcompletely.NUMERIC KEYSUse these buttons to select channels andinput digitPRE, P-CHUse these buttons to return to the previouschannel. ASPECT RATIOUse this button to change the picture size.(This function is available only with the TV,Video, S-Vedio mode.) STILLUse this button to freeze a picture.VOLUMEUse this button to control the volume level.P-CHANNEL- Use this button to select channels.- Use this button to jump back to TV modefrom other mode.- Use this button to turn the TV set on.MULTIUse this button to select 9 partitionsscreens. (This function is available onlywith the TV, Video, S-Vedio mode.)SOURCEUse this button to select the input sourcein sub picture.UP/DOWNUse these buttons to move each item ofmenu you want to choose.MAIN SOURCE- Use these buttons to display theavailable video source. (TV, VIDEO, S-VIDEO, COMPONENT, PC)SLEEPUse this button to allow your TV to turn offautomatically at designated time.CC(Closed Caption)Use this button for Closed Caption On/Off. The buttons are reserved for functions coming withlater models and do not currently operate.V-CHIPThe V-Chip feature locks out programs that are deemedinappropriate for children.INFORMATIONUse this button to display picture mode, resolution orvarious program information.MTSUse this button to display types of audio signalscurrently aired on TV. Or you can use this button toswitch to other Sound Mode available.EXITUse this button to exit from a menu or function.LEFT/RIGHTUse this button to select or adjust each item of menu.MENUUse this button to bring up the OSD on the screen andjump back to the previous menu.POP (Picture Of Picture)Use this button for POP On/Off. (This function isavailable only with the TV, Video, S-Vedio mode.) PIP (Picture in Picture) / POSITIONUse this button for POP On/Off or select position.VIDEOUse this button to select Video or S-Video mode.COMPONENT/PCUse this button to select Component or PC mode.SOUNDUse this button to select the status of sound.PICTUREUse this button to select the status of picture.P-CH EDITUse this button to store or erase the desired channels.1 203475869MENUINFO MTS SLEEP TTXTTX/MIX INDEX LIST/FLOF STOREHOLD SIZE REVEAL SUB PAGEMAINVCHIPEXITMUTEP-CH EDIT PRE, P-CHSOUNDCOMPONENTPCSUBVOLUMEVIDEOPIPPOSITIONPOP SOURCE MULTISOURCEPICTURE ASPECT STILLPOWERP-CHANNELPress and hold ∆part and push toopen cover.Insert batteries with properpolarities of + and - .Use the remote control with coverclosed.123
Connecting Indoor/Outdoor TV Antenna(UHF/VHF) ......................23Connecting to the Antenna Input Connectionon the External Equipment ..........................................................24Before connecting the video connections to external devices ....25Connecting a VCR, Cable/Satellite Receiver ................................26Connecting a DTV Receiver or DVD Player ..................................27Playing Back a Tape Recorded On a Camcorder .........................28Connecting to a PC ......................................................................29Resolutions Supported in PC .......................................................30ConnectionsHYUNDAI LCD COLOR TV
HYUNDAI LCD TV HQL170WR/200NR23 24CONNECTIONSCONNECTIONSConnecting to the Antenna Input Connection on the External EquipmentConnection Method Connect an antenna cable to VCR/Cable/Satellite Receiver with the antenna input.Use a coaxial cable to connect VCR/Cable/Satellite Receiver's antenna output to the antenna input on yourLCD TV.12Connecting Indoor/Outdoor TV Antenna(UHF/VHF) Connection Method Ensure to connect an antenna cable to the antenna input connection.How to WatchTurn on your LCD TV and press or on remote control unit to select TV.You can select TV VIDEO S-VIDEO COMPONENT PC in order.Press or Numeric keys to select the desired channels.12• When inserting a 75-ohm coaxial cable into the input connection, ensure the wire tip not to bend.• If you experience poor signal reception, we recommend you purchase a signal amplifier for better picturequality.SOURCEMAINoutdoor antenna indoor antenna Antenna cableAntenna cableCoaxial cableCoaxial cablePower CableP-CHANNELP-CHANNELVCR/Cable Receiver)=,17;>1,-7>1,-7:4)6<7=<)6<16Coaxial cable
HYUNDAI LCD TV HQL170WR/200NRCONNECTIONSCONNECTIONS2625Connecting a VCR, Cable/Satellite Receiver Connection Method Connect Video/S-Video cable between Video/S-Video output terminal of VCR or Cable/Satellite receiver andVideo/S-Video input terminal of LCD TV.(Connect cables and terminal in the same colors) Connect Audio cable (left:white color, right:red color) between Audio output terminal of VCR or cable/satellitereceiver and Audio input terminal of LCD TV.(Connect cables and terminal in the same colors) How to WatchTurn on your LCD TV and press on remote control unit to select Video or S-Video.You can select VIDEO S-VIDEO in order.VCR play : Turn on the VCR and insert a tape and play it. Cable/Satellite receiver : Turn on the receiver and select a channel. Read a user manual of VCR, Cable/Satellite Receiver for more details.Before connecting the video connections to external devices .....Please make sure to read the following information on connection to enjoy best picture quality.Video/Audio connectorsTypes of video/audio cable :➀ 15-Pin D-Sub ➁ COMPONENT ➂ S-VIDEO ➃ COMPOSITE Best picture quality is displayed in the following order.1212Use S-video cables for better picture quality. COMPONENT15 Pin-D-Sub >>>S-VIDEO COMPOSITEThe superior picture quality starts from the far left side.)=,17>1,-7;>1,-7:4)6<16)6<7=<VIDEOAudio CableVIDEO Cable or S-VIDEO CableVCR/Cable Receiver
HYUNDAI LCD TV HQL170WR/200NRCONNECTIONS2827CONNECTIONSPlaying Back a Tape Recorded On a CamcorderConnection Method Connect Video cable between Video output terminal of Camcoder/Game player and Video input terminal ofLCD TV.(Connect cables and terminal in the same colors) Connect Audio cable (left:white color, right:red color) between Audio output terminal of Camcoder/Gameplayer and Audio input terminal of LCD TV. (Connect cables and terminal in the same colors) How to WatchTurn on your LCD TV and press on remote control unit to select Video.You can select VIDEO S-VIDEO in order.Turn on a Game player or Camcorder and use it. Read the user manual of Game player or Camcorder for more details.1212VIDEOConnecting a DTV Receiver or DVD Player Connection Method Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DTV receiver or DVD player and theinput terminals(Y, Pb, Pr) of DTV/DVD(480i/480p/720p/1080i) on the rear of LCD TV.(Connect cables and terminal in the same colors) Connect Audio cable between Audio output terminal of DTV receiver or DVD player and Audio input terminalfor DTV/DVD Audio on the rear of LCD TV.(Connect cables and terminal in the same colors) How to WatchTurn on your LCD TV and press on remote control unit to select DTV or DVD.You can select COMPONENT PC in order.Turn on a DTV receiver or DVD player and use it. Read the user manual of DTV receiver or DVD player for more details.1- Output terminal mark(Y, Pb, and Pr) of DVD player may be written as Y, B-Y, R-Y/Y-Cb-Cr / Y-Pb-Pr. (It dependson DVD player) - To watch digital broadcast, you have to separately purchase a digital set-top box and connect it to LCD TV. 2COMPONENTPC12)=,17>1,-7 ;>1,-7+75876-6<>1,-7DTV receiver/DVD PlayerAudio CableVIDEO(Y, Pb, Pr) Cable )=,17>1,-7:4Game PlayerCamcorderAudio CableVIDEO Cable
HYUNDAI LCD TV HQL170WR/200NRCONNECTIONSCONNECTIONS3029Connecting to a PC Connection Method Connect PC signal cable(15 pins D-SUB) between output terminal of PC and the D-SUB input terminal ofa LCD TV. Connect Audio cable between Audio output terminal of PC and Audio input terminal for PC of LCD TV.(Connect cables and terminal in the same colors) When Using as a PC MonitorTurn on your LCD TV and press on remote control unit to select PC.You can select COMPONENT PC in order.Turn on the PC and use it. (Refer to next page on the back for the supported resolutions for PC)- This product supports plug-and-play function. - We recommend the above method if the satellite receiver supports DTV signal with D-SUB(15 pin) cable for thebetter quality picture. 1212COMPONENTPCAudio CableD-SUB Cable(15pin)Resolutions Supported in PC - HQL200NR- Recommended Resolution is 640x480@75Hz- Max Resolution is 1024x768@75Hz- HQL170WR- Recommended Resolution is 1280x768@60Hz- Max Resolution is 1280x768@60HzResolution31.531.537.937.946.948.456.560720 x 400800 x 6001024 x 768Horizontal frequency(kHz)640 x 48070.159.972.860.3756070.175Vertical frequency(Hz)Resolution31.531.537.937.946.948.456.56047.7720 x 400800 x 6001024 x 7681280 x 768Horizontal frequency(kHz)640 x 48070.159.972.860.3756070.17560Vertical frequency(Hz)
How to Select the Picture Mode .................................................33How to Set the Desired Picture ...................................................34How to Set Noise Reduction .......................................................35How to Set PIP [Mode] ................................................................36How to Set POP [Mode] ..............................................................36How to Set Multi [Mode] .............................................................37How to Select the Aspect Ratio ..................................................39Picture SetupHYUNDAI LCD COLOR TV
33 34PICTURE SETUPPICTURE SETUPHYUNDAI LCD TV HQL170WR/200NRHow to Set the Desired PictureUsers can manually adjust the picture in their own ways. Press Menu button. Menu items appear on the screen. Press Left and Right buttons to select “Picture icon”.Press Up and Down buttons to move to “Mode”.Press Left and Right buttons, then the menu changes in order below. DYNAMIC MILD STANDARD USER Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.DYNAMIC : For a clear display. MILD : For a soft display.STANDARD : For a general contents, It fits most video contents.USER : When the user wants to set the values see the next page 123Press Menu button. Menu items appear on the screen. Press Left and Right buttons to select “Picture icon”.Press Up and Down buttons to move to “MODE”.Press Left and Right buttons to select “USER”.Press Up and Down buttons to choose one of the items listed.Press Left and Right buttons to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.CONTRAST : Adjust the brightness and darkness of object and background. BRIGHTNESS : Adjust the brightness of the entire picture. COLOR : Adjust colors into deeper or lighter colors.TINT : Adjust colors naturally.SHARPNESS : Adjust clarity of outline of objects.12345How to Select the Picture Mode Users can adjust picture mode automatically according to the input mode(TV, Video, S-Video, Component).How To Directly Select Picture Mode : Press button. - Users can select Dynamic Mild Standard User in order.PICTUREMOVE MENUSELECTMODE CONTRAST BRIGHTNESS COLOR TINT SHARPNESSNOISE REDUCTUSER3020252520OFFMOVE MENUSELECTMODE CONTRAST BRIGHTNESS COLOR TINT SHARPNESSNOISE REDUCTUSER3020252520OFFMOVE MENUSELECTMODE CONTRAST BRIGHTNESS COLOR TINT SHARPNESSNOISE REDUCTUSER3020252520OFFMOVE MENUSELECTMODE CONTRAST BRIGHTNESS COLOR TINT SHARPNESSNOISE REDUCTUSER3020252520OFFAdjustments menu may be different according to the input source. COLOR, TINT, SHARPNESS is not applied to PC, Component mode.MENUEXITMENUEXIT
36PICTURE SETUPHYUNDAI LCD TV HQL170WR/200NR35PICTURE SETUPPress Menu button. Menu items appear on the screen. Press Left and Right buttons to select “Picture icon”.Press Up and Down buttons to move to “NOISE REDUCT”.Press Left and Right buttons, then the menu changes in order below. OFF MIDDLE STRONGPress MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.OFF : For a normal screen.MIDDLE : For a reduced noise on the screen.STRONG : For a reduced a lot of noise on the screen.123How to Set Noise ReductionNoise Reduction is to eliminate some noise on the screen and It is not applied to Component and PC mode.MOVE MENUSELECTMODE CONTRAST BRIGHTNESS COLOR TINT SHARPNESSNOISE REDUCTUSER3020252520OFFMOVE MENUSELECTMODE CONTRAST BRIGHTNESS COLOR TINT SHARPNESSNOISE REDUCTUSER3020252520OFFMENUEXITIn the noise reduction, the more you reduce the screen noise, the more sharpness level of the picture maybecome degrade.How to Set PIP [Mode]- You can watch another device's image in the PIP while watching the main image.- This function is available only with the remote control.How to Set POP [Mode]- You can watch another device's image in the POP while watching TV, VIDEO, S-VIDEO mode in the main image.- This function is available only with the remote control.Press the PIP button.You will see the PIP at the upper left corner.Press the PIP button, then position changes in order below. Left Up Right Up Right DownLeft Down OFF Press the SOURCE button, then PIP input source changes in order below. TV VIDEO S-VEDIOTo deselect PIP function, Press EXIT button.Press the POP button.You will see the POP at the Right.Press the SOURCE button, then POP input source changes in order below. TV VIDEO S-VEDIOTo deselect POP function, Press POP button once more or Press EXIT button.1423MainMain POP- Main and sub pictures cannot have the same input source. - In case of TV mode, you can change the PIP TV channel by “P-CHANNEL” Button. - In case of TV mode, you can change the POP TV channel by “P-CHANNEL” Button.PIPPIPSOURCESUBSOURCESOURCESUBSOURCEPOPPOPPIPEXITEXIT
How to Set Multi [Mode]- You can watch another device's image in the MULTI while watching TV, VIDEO, S-VIDEO mode in the main image.- This function is available only with the remote control.Supported PIP TablePIP : O →Supported, X →Not Supporte37 38PICTURE SETUPPICTURE SETUPHYUNDAI LCD TV HQL170WR/200NRPress the MULTI button.You will see the Multi screen of nine screens.To deselect Multi function, Press MULTI button once more or Press EXIT button.1234 56789EXITMULTIMULTISupported POP TablePIP : O →Supported, X →Not SupporteHow to Freeze PictureThe user can temporarily stop the playing picture. - In case of TV mode, you can change the multi TV channel.- You cannot change the multi input source.TVVideoS-VideoComponentPCTVXOOXXVideoOXOXXS-VideoOOXXXComponentXXXXXPCXXXXXSub MainTVVideoS-VideoComponentPCTVXOOXXVideoOXOXXS-VideoOOXXXComponentOOOXXPCOOOXXSub MainTSTILLPress Still button. Playing picture is stopped. * In PIP/POP mode, the main picture stops. To deselect Still function. Press Still button once more.
39PICTURE SETUPHow to Select the Aspect Ratio- Users can adjust Aspect Ratio as users want.- This function is available only with the remote control.ASPECTPress the ASPECT button, then Aspect Ratiochanges in order below. NORMAL Zoom 16:9 (HQL200NR)NORMAL Panorama Zoom 16:9 (HQL170WR)This function is available only in TV, VIDEO, S-VIDEO mode.This function is not available in PIP, POP, MULTI mode.General broadcast picturesize.NormalPicture size for panoramavideo. Panorama General broadcast pictureis adjusted to 15:9. NormalGeneral broadcast picture isadjusted to 16:9. 16:9Zoom in 4:3 in verticaldirection. (This mode isrecommended in letterbox format.)ZoomZoom in 4:3 in verticaldirection. (This mode isrecommended in letterbox format.)Zoom4:3General broadcast picturesize.HQL200NR HQL170WR
How to Select the Volume, Balance and Mute ............................41How to Set the Audio Mode(Equalize) .........................................42How to Set the Desired Audio .....................................................43How to Listen to Stereo Sound / SAP ..........................................44How to Select the Surround ........................................................44Audio SetupHYUNDAI LCD COLOR TV
MUTEHYUNDAI LCD TV HQL260How to Select the Volume, Balance and Mute - Users can adjust the volume and Balance of left and right speakers.How To Select the Mute : Press button. Playing sound is Stopped. To deselect Mute function, Press MUTE button once more.How to Set the Audio Mode(Equalize)Users can adjust sound mode automatically as users want. How To Directly Select Sound Mode : Press button. Users can select STANDARD MUSIC MOVIE NEWS USER in order.41 42AUDIO SETUPAUDIO SETUPHYUNDAI LCD TV HQL170WR/200NRPress Menu button. Menu items appear on the screen. Press Left and Right buttons to select “Audio icon”. Press Up and Down buttons to move to “VOLUME or BALANCE”. Press Left and Right buttons to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.12Press Menu button. Menu items appear on the screen. Press Left and Right buttons to select “Audio icon”. Press Up and Down buttons to move to “EQUALIZE”. Press Left and Right buttons, then the menu changes in order below. STANDARD MUSIC MOVIE NEWS USER Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.STANDARD : For the general sound. This fits most audio contents. MUSIC : For enjoying original sound. MOVIE : For grandiose sound.NEWS : For the clear sound. USER : When the user wants to set the value see the next page 1233MOVE MENUSELECTVOLUMEBALANCEEQUALIZE 120 Hz 500 Hz 1.5 kHz 5 kHz 10 kHzSURROUND2025STANDARD1516121213OFFMOVE MENUSELECTVOLUMEBALANCEEQUALIZE 120 Hz 500 Hz 1.5 kHz 5 kHz 10 kHzSURROUND2025STANDARD1516121213OFFMOVE MENUSELECTVOLUMEBALANCEEQUALIZE 120 Hz 500 Hz 1.5 kHz 5 kHz 10 kHzSURROUND2025STANDARD1516121213OFFMOVE MENUSELECTVOLUMEBALANCEEQUALIZE 120 Hz 500 Hz 1.5 kHz 5 kHz 10 kHzSURROUND2025STANDARD1516121213OFFMENUEXITMENUEXITSOUND
HYUNDAI LCD TV HQL170WR/200NRAUDIO SETUP43 44AUDIO SETUPHow to Set the Desired AudioUsers can manually adjust the sound in thier own ways. Press Menu button. Menu items appear on the screen. Press Left and Right buttons to select “Audio icon”. Press Up and Down buttons to move to “EQUALIZE”. Press Left and Right buttons to select “USER”.Press Up and Down buttons to choose one of the items listed. 120 Hz 500 Hz 1.5 kHz 5 kHz 10 kHz Press Left and Right buttons to adjust. Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.12345MOVE MENUSELECTVOLUMEBALANCEEQUALIZE 120 Hz 500 Hz 1.5 kHz 5 kHz 10 kHzSURROUND2025STANDARD1516121213OFFMOVE MENUSELECTVOLUMEBALANCEEQUALIZE 120 Hz 500 Hz 1.5 kHz 5 kHz 10 kHzSURROUND2025STANDARD1516121213OFFMENUEXITHow to Listen to Stereo Sound / SAP- Depending on the particular program being broadcast, you can listen to stereo, mono, or a Secondary AudioProgram. (SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information likenews or weather.)- This function is available only with the remote control.How to Select the SurroundYou can listen to dynamic and surround sound only with ordinary speaker.MTSPress the MTS button. User can select MONO STEREO SAP in order.MONO : Choose Mono for channels that are broadcasting in mono,or if you are having difficulty receiving a stereo signal.STEREO : Choose Stereo for channels that are broadcasting in stereo.SAP : Choose SAP to listen to the Secondary Audio Program,which is usually a foreign-language translation.Press Menu button. Menu items appear on the screen. Press Left and Right buttons to select “Audio icon”. Press Up and Down buttons to move to “SURROUND”. Press Left and Right buttons to select “ON/OFF”.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.123MENUEXITMOVE MENUSELECTVOLUMEBALANCEEQUALIZE 120 Hz 500 Hz 1.5 kHz 5 kHz 10 kHzSURROUND2025STANDARD1516121213OFFMOVE MENUSELECTVOLUMEBALANCEEQUALIZE 120 Hz 500 Hz 1.5 kHz 5 kHz 10 kHzSURROUND2025STANDARD1516121213ON
How to Select the Color Mode ....................................................47How to Select the Auto Adjust ....................................................48How to Set the Geometry ............................................................49PC SetupHYUNDAI LCD COLOR TV
47 48PC SETUPPC SETUPHYUNDAI LCD TV HQL170WR/200NRPress Menu button. Menu items appear on the screen. Press Left and Right buttons to select “Picture icon”.Press Up and Down buttons to move to “Mode”.Press Left and Right buttons, then the menu changes in order below. COOL WARM STANDARD USER Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.COOL : For colors with bluish tone.WARM : Warm colors with reddish tone.STANDARD : Color for general picture.USER : When the user wants to set the values see the 34 page 123How to Select the Color ModeThis function is available only with the PC mode.How To Directly Select Picture Mode : Press button. - Users can select Cool Warm Standard User , when the input mode is PC mode. PICTUREMOVE MENUSELECTMODE CONTRAST BRIGHTNESS COLOR TINT SHARPNESSNOISE REDUCTUSER3020252520OFFMOVE MENUSELECTMODE CONTRAST BRIGHTNESS COLOR TINT SHARPNESSNOISE REDUCTUSER3020252520OFFMENUEXITPress Menu button. Menu items appear on the screen. Press Left and Right buttons to select “PC icon”.Press Up and Down buttons to move to “Auto Adjust”.Press Left and Right buttons to “Auto Adjust”, then it will be adjusted the screen.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.123How to Select the Auto Adjust- Horizontal/Vertical positions are automatically adjusted.- This function is available only with the PC mode.MOVE MENUSELECTAUTO ADJUSTH-SIZEH-POSITIONV-POSITIONFINE TUNESMOOTHING 7251200MOVE MENUSELECTAUTO ADJUSTH-SIZEH-POSITIONV-POSITIONFINE TUNESMOOTHING 7251200MENUEXIT
49PC SETUPPress Menu button. Menu items appear on the screen. Press Left and Right buttons to select “PC icon”.Press Up and Down buttons to choose one of the items listed. Press Left and Right buttons to adjust.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.H-SIZE : To adjust the horizontal size of the picture.H-POSITION : To adjust the horizontal position of the picture.V-POSITION : To adjust the vertical position of the picture.FINE TUNE : To adjust to eliminate the shake of picture.SMOOTING : To change viewing point at high resolution(Upper VGA)123How to Set the Geometry- This is reduct image retenion and noise.- This function is available only with the PC mode.MOVE MENUSELECTAUTO ADJUSTH-SIZEH-POSITIONV-POSITIONFINE TUNESMOOTHING 7251200MOVE MENUSELECTAUTO ADJUSTH-SIZEH-POSITIONV-POSITIONFINE TUNESMOOTHING 7251200MENUEXIT
How to Store Channel Automatically ..........................................51How to Set Manual Store ............................................................52Channel SetupHYUNDAI LCD COLOR TV
HYUNDAI LCD TV HQL170WR/200NRCHANNEL SETUPCHANNEL SETUP51 52How to Store Channel Automatically- When you start using your TV for the first time, you must select your country to auto store.- You can scan channels available to you automatically.123If you press the MENU button in the middle of Auto Store, the first stored channel will be displayed, and the AutoStore stops. 455667Press Menu button. Menu items appear on the screen. Press Left and Right buttons to select“Channel icon”. Press Up and Down buttons to move to “Country”.Press Left and Right buttons, then the menu changes in order below.USA KOREAPress Up and Down buttons to move to “Auto Store”.Press Left and Right buttons to selcet “Auto Store”, then it will be stored the searched channels.After completing channel searching, it will return to the first stored channel.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.MOVE MENUSELECTCOUNTRYAUTO STOREMANUAL STORE CHANNEL NO CHANNEL EDIT FINE TUNEUSA TV 2STORED-1MOVE MENUSELECTCOUNTRYAUTO STOREMANUAL STORE CHANNEL NO CHANNEL EDIT FINE TUNEUSA TV 2STORED-1MOVE MENUSELECTCOUNTRYAUTO STOREMANUAL STORE CHANNEL NO CHANNEL EDIT FINE TUNEUSA TV 2STORED-11234Press Menu button. Menu items appear on the screen. Press Left and Right buttons to select“Channel icon”. Press Up and Down buttons to move to “Channel No”.Press Left and Right buttons to change the channel, then the menu change in order below. TV : CH 2~69 CATV : CH 1, 14~125User cannot use number (0~9) button.Press Up and Down buttons to move to “Channel Edit”.Press Left and Right buttons to selcet “Stored/Erased”, Channel Number is current channel.Go to step 6,If the signal of current channel is weak or distored.Press Up and Down buttons to move to “Fine Tune”.Press Left and Right buttons to adjust.The fine tuned channels are automaticlly stored.Press MENU button after the setting is done, and Menu goes to the previous menu.If the EXIT button is pressed, the menu disappears.MOVE MENUSELECTCOUNTRYAUTO STOREMANUAL STORE CHANNEL NO CHANNEL EDIT FINE TUNEUSA TV 2STORED-1MOVE MENUSELECTCOUNTRYAUTO STOREMANUAL STORE CHANNEL NO CHANNEL EDIT FINE TUNEUSA TV 2STORED-1MOVE MENUSELECTCOUNTRYAUTO STOREMANUAL STORE CHANNEL NO CHANNEL EDIT FINE TUNEUSA TV 2STORED-1MOVE MENUSELECTCOUNTRYAUTO STOREMANUAL STORE CHANNEL NO CHANNEL EDIT FINE TUNEUSA TV 2STORED-1MENUEXITMENUHow to Set Manual StoreThis function allows you to manually add or delete the desired channels while watching a program.If the signal is weak or distored, you may have to fine tune the channel manually.How To Directly Select ADD/ERASE Channel : Press button. The selection will switch whenever you press the Add/Delete button on the remote control.P-CH EDIT

Navigation menu