Hyundai IBT L510 15" LCD Monitor User Manual

Hyundai IBT Corp. 15" LCD Monitor Users Manual

Users Manual

NEXT
BACKNEXT
BACKNEXTKind of equipment : COLOR MONITORType-Designation : L15A0C060Safety : EN 60950 : 1992 + A1, A2, A3, A4EMC : EN 55022 : 1998, EN 55024 : 1998EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998EN 61000-3-3 : 1995Accredited testlaboratory:TÜV RheinlandAm Grauen Stein51105 Köln2001
BACKNEXTContents4. Adjusting the picture ................9/174-1. Using the On Screen Display ........10/174-2. Direct access buttons ....................10/174-3. OSD Adjustments ........................11/175. Display power management ..13/17Reducing power consumption . . . . . . . . . 1 3 / 1 76. Troubleshooting ......................14/177. Specifications . . . . . . .. . . . . . . . . . . . . . . . . . . 1 7 / 1 71. Introduction ...............................1/172. Safety Information ...................1/173. Installing the monitor ..............4/173-1. Packing List ....................................4/173-2. Selecting a suitable location .........5/173-3. Connecting the monitor ................5/173-4. Setting the re f resh rate ................7/17Preset Timing Table .......................8/17
1. Introduction2. Safety Information1/18BACKNEXTThis manual contains instructions for installing and operating ImageQuest L510.ImageQuest L510 is a highly ergonomic color display unit.• 15" viewable XGA LCD• Supporting full scan flicker-free picture quality• With On Screen Display menus for user control• 100-240V AC input voltage• VESA DPMS (Display Power Management Signalling)• VESA DDC1/2B compatibilityThis Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following:Do not place anything wet on the monitor or the powercord. Never cover the ventilation openings with anymaterial and never touch them with metallic or inflammable materials.Avoid operating the monitor in extreme heat, humidity or areas affected by dust. Temperature : 5~35°CHumidity : 30~80RH
2/18BACKNEXTBe sure to turn the monitor off before plugging thepower cord into the socket. Make sure that the powercord and the other cords are securely and rightlyconnected.Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement.Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface.Do not use a solvent, such as benzene, to clean the monitor, as it will damage the LCD surface.
Cleaning and Maintenance • To avoid risk of electric shock, do not disassemble the display unit cabinet. Theunit is not user-serviceable. Remember to unplug the display unit from thepower outlet before cleaning.• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do notuse thinner or benzene, abrasive cleaners or compressed air.• Do not wipe the screen with a cloth or sponge that could scratch the surface.• To clean your antistatic screen, use water and a special microfiber screencleaning tissue used in optical lens cleaning, or lightly dampen a soft, cleancloth with water or a mild detergent.• If the instructions above do not help in removing stains, contact an authorizedservice agent. 3/18BACKNEXT
4/18BACKNEXTThe following items should be found in the packaging.Above power cord can be changed upon different voltage areas. Pleasecontact your dealer if anything is missing or damaged.3. Installing the monitor3-1. Packing List!Power CordSignal CableDVI-D CableAC/DC Power adapterCompact Disc
5/18BACKNEXT3-2. Selecting a suitablelocation3-3. Connecting the monitor• Place the monitor at least 30cm from other electrical or heat-emittingequipment and allow at least 10cm on each side for ventilation.• Place the monitor in a position where no light shines directly onto or isreflected on the screen.• To reduce eye strain, avoid installing the display unit against a brightbackground such as a window.• Position the monitor so that the top of the screen is no higher than eye level.• Position the monitor directly in front of you at a comfortable reading distance(around 45 to 90cm) Before you start cabling your monitor, check that thepower is off on all units. To avoid any possibility ofelectric shock, always connect your equipment toproperly earthed outlets.1. Insert the other 15-pin /DVI-D signal cable connector into the 15-pin VGA/DVI-Dconnection on your computer and screw it down. 2. Plug the power cord connection to connection on the AC-DC Power adapter.3. Plug the jack of the AC-DC Power adapter connection to connection on monitor.4. Plug the other end of the power cord to your computer's main supply or to a100V-240V earthed electrical outlet.5. Turn on the monitor using the power switch and check that the power LED ison. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section ofthis guide.!!
6/18BACKNEXT6. Turn on the power to the computer. The picture will appear within about 10seconds. Adjust the picture to obtain optimum picture quality. See sectionAdjusting the picture in this guide for more information.
7/18BACKNEXT3-4. Setting the refreshrate Follow the instructions below to set your refresh rate in Windows 98.1. Go to the configuration window(Start-Settings-Configuration window).2. Double click on the ‘Display’ icon.3. Click on the ‘Settings’ tab.4. Click on the ‘Advanced’ button.5. Click on ‘Adapter’ and select 60Hz from the list.6. Click on ‘Apply’ to accept the selected value.
No.1234567891011Resolution720 x 400640 x 480640 x 480800 x 600800 x 600800 x 600800 x 600832 x 624@1024 x 7681024 x 7681024 x 768Horizontal Frequency31.5 KHz31.5 KHz37.9 KHz35.2 KHz37.9 KHz48.1 KHz46.9 KHz49.7 KHz48.4 KHz56.5 KHz60.0 KHzRefresh rate70 Hz60 Hz73 Hz56 Hz60 Hz72 Hz75 Hz75 Hz60 Hz70 Hz75 Hz@ Recommended primary mode.Preset Timing Table If the signal from the system doesn't equal to the preset timing mode, adjustthe mode with reference to the user guide of videocard because the screenmay not be displayed.The recommended setting is a resolution of 1024x768 and a refresh rate of 60Hz.8/18BACKNEXT!
4. Adjusting the picture9/18BACKNEXTYou can adjust the screen display by using the buttons located below thescreen.
10/18BACKNEXT1. Push the MENU button to call the OSD to the screen. The resolution andfrequency are displayed at the top of the menu box for your information.The resolution is displayed only when the monitor works in the presetmode.2. Push the or button to choose the item you want to adjust. The selecteditem is highlighted.3. Push the SELECT button to adjust the highlighted item. 4. Use the or button to adjust the selection.5. Push the MENU button to return to the previous menu if you are in a submenu.6. The display unit automatically saves the new settings in 1 second after yourlast adjustments and the menu disappears. You can also push the MENU buttonto make the menu disappear.AUTO ADJUST(At First, Display a full screen, such as Window’s back ground)Push the button SELECT (AUTO) to adjust the shape of screenautomatically.INPUT SELECTPush the botton to choose the input select adjustmentAfter choosing one of Analog Signal or Digital Signal.4-1. Using the On ScreenDisplay 4-2. Direct access buttons!
11/18BACKNEXT4-3. OSD Adjustments• ANALOG R.G.B INPUTYou can play the moviefile to see how to adjustthe picture image byclicking each icon or titlehereunder.The OSD adjustments available to you are listed below.BRIGHTNESSAdjust the brightness of the screen.CONTRASTAdjust the contrast of the screen.COLOR CONTROLColor temperature affects the tint of the image. With lower color temperatures the image turns reddish and with higher temperatures bluish.There are three color settings available: Mode 1(a cool white), Mode 2(awarm white) or USER. With the USER setting you can set individual valuesfor red, green and blue.YUV COLORIn particular, color technology allows users to make the following coloradjustment.HUEAdjust the hue of the video image.FLESH TONEAdjust the saturation of the video image.
12/18BACKNEXTMISCELLANEOUSRECALL Recall the saved color data.OSD TIMERYou can set the displayed time of OSD Menu window on the screen byusing this adjustment.OSD POSITIONAdjusts the OSD menu’s horizontal or vertical position on the screen.AUTO ADJUSTYou can adjust the shape of screen atomatically at the full screen pattern.LANGUAGEYou can select the language in which adjustment menus are displayed. The following languages are available: English, French, German, Italian and Spanish.H/V POSITIONH-POSITIONAdjusts the horizontal position of the entire screen image.V-POSITIONAdjusts the vertical position of the entire screen image.
CLOCK PHASEPHASEAdjust the noise of the screen image.CLOCKAdjust the horizontal size of the entire screen image.INPUT SELECTThis menu used to choose the desired input signal source.There are two available signal source.• Analog R.G.B : 15 pin D-sub, Analog Signal• Digital R.G.B : 24 pin D-sub, Digital SignalDigital R.G.B INPUT¿∏∑Œ¿¤µøΩ√ø°¥¬COLOR CONTROL, AUTO ADJUST, H/V POSITION, CLOCK PHASE ±‚¥…¿∫¡ˆø¯µ«¡ˆæ Ω¿¥œ¥Ÿ.13/18BACKNEXT!
If the power management function of your computer is enabled, your monitorturns on and off automatically. You can control power management features fromyour computer.Your computer may have power management features which enable the computeror monitor to enter a power saving mode when the system is idle. You canreactivate the system by pressing any key or moving the mouse.The power button does not disconnect the monitor from the mains. The onlyway to isolate the monitor completely from the mains supply is to unplug themains cable.14/18BACKNEXT5. Display power managementReducing powerconsumptionPower consumption40 W5 W0 WModeNormaloffUnpluggedLEDGreenOrangeNot illuminated!
6. Troubleshooting15/18BACKNEXTProblemBlank screenError message:Video mode notsupportedThe display does not enter power managementmodePossible solutionIf the power LED is not lit, push the Soft power switch or check theAC cord to turn the monitor on. If the display unit is poweredthrough the computer, check that the computer is switched on.The display unit might be in standby mode. Push one of thekeyboard keys. Check that the keyboard is properly connected tothe computer.Check that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. If the connector isloose, tighten the connector's screws.Check that the power cable is correctly connected to the display unitand to the power outlet. Check the resolution and the frequency on the video port of yourcomputer.Compare these values with the data in the Preset Timing Table.The video signal from the computer does not comply with VESADPMS standard. Either the computer or the graphics adapter is notusing the VESA DPMS power management function.If your monitor is not functioning properly, you may be able to solve the problemby reading followings.
16/18BACKNEXTPossible solutionCheck that the signal cable connector is properly connected and thatthe connection pins are not bent or damaged. Try another colortemperature. Adjust the picture characteristics as described in the sectionAdjusting the picture.A problem with your graphics adapter or display unit. Contact yourservice representative.Check that the display resolution and frequency from your PC orgraphic adapter is an available mode for your monitor.In your PC, you can check through Control panel, Display, Settings.If the setting is not correct, use your computer utility program tochange the display settings.ProblemColor defectsSize, position,shape or qualityunsatisfactoryDuplicatedimagesImage is notstable
17/18BACKNEXTContacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible.Unplug the display unit from the power outlet and contact a service agent when:• The monitor does not operate normally according to the operating instructions.• The monitor exhibits a distinct change in performance.• The monitor has been dropped or the cabinet has been damaged.• The monitor has been exposed to rain, or water or liquid has been spilled ontothe monitor.
18/18BACK15"viewable, DiagonalPixel pitch 0.297 mm, AM-TFT 35msec, 250cd/m235msec304 X 228 mm16,7 million colorsR.G.B Analog, Digital signal(DVI-D),Horizontal : 31.0 to 60.0KHzVertical : 56 to 75Hz80 MHz1024X768@75HzDC 12V/5V 2.0A / 2.0A40WVESA DPMSVESA DDC 1/2BBRIGHTNESS, CONTRAST, COLOR CONTROL, YUV COLOR, MISCELLANEOUS, AUTO ADJUST, LANGUAGE, H./V. POSITION, CLOCK-PHASE, INPUT SELECTTCOFCC Class B, CE,cULus, TÜV-GS, NEMKO, DEMKO, FIMKO, SEMKO5 ~ 35O C2.7Kg unpacked, 4.0Kg packed367 X 353 X 188 mmLCDBrightnessResponse TimeDisplay areaNumber of colorInput signalsFrequency rateMaximum bandwidthMaximum resolutionInput voltagePower consumptionPower managementPlug & PlayOSD menuErgonomics,Safety and EMCOperating TemperatureWeightDimensions (W X H X D mm)• Specification is subject to change without notice for performance improvement.7. Specifications

Navigation menu