Hyundai IBT L24D3F080 LCD MONITOR User Manual

Hyundai IBT Corp. LCD MONITOR Users Manual

Users Manual

Type No. L24D3F080Model. S243X / S243AMulti Function 2D/3D Wide MonitorUser’s Guide
S243X / S243AMulti Function 2D/3D Wide Monitor2/31U.S.A.U.S.FEDERAL COMMUNICATIONS COMMISSIONRADIO FREQUENCY INTERFERENCE STATEMENTINFORMATION TO THE USERNOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet of a circuit different from that to which •the receiver is connected.Consult the dealer or an experienced radio/TV technician for assistance.•Changes or modication not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables.
S243X / S243AMulti Function 2D/3D Wide Monitor3/31DECLARATION OF CONFORMITYWE HYUNDAI IT CORP.Ami-ri Bubal-Eub Ichon-Si Kyungki-Do467-860 KOREAdeclare under our sole responsibility that the product:Kind of equipment : LCD MONITORType-Designation : L24D3F080to which this declaration relates is in conformity with thefollowing standard(s) or other normative document(s)Safety :EMC : EN 60950-1:2002EN 55022/1998+A1:2000+A2:2003EN 55024 :1998+A1:2001+A2:2003EN 61000-3-2:2006EN 61000-3-3/A2:2005following the provisions of the Low Voltage Directive 73/23/EEC,93/68/EEC and the EMC Directive 89/336/EEC.Accredited test laboratory:TUV SUD Product Service GmbH.Zertifizierstelle Ridlerstrasse 65,80339 Munchen. GermanyKOREA / June 29, 2011(Place and date of issue) Jin Ho, Lee (Name and signature of authorized person)
S243X / S243AMulti Function 2D/3D Wide Monitor1. Introduction ............................................................................ 1/312. Safety Information ................................................................. 1/313. Cautions for Health &Safety ................................................. 3/314. Handling Instructions ............................................................ 5/315. 3D Monitor Setting Guide ..................................................... 6/316. Q&A for 3D Mode .................................................................. 6/317. 3D Mode Specification ........................................................... 8/318. Installing the monitor ............................................................ 9/319. Adjusting the picture ........................................................... 19/3110. Display power management ............................................. 27/3111. Troubleshooting ................................................................. 28/3112. Specifications ..................................................................... 31/31Contents
S243X / S243AMulti Function 2D/3D Wide Monitor1/311. Introduction This manual contains instructions for installing and operatingHYUNDAI IT CORP. S243X / S243A.HYUNDAI IT CORP. S243X / S243A is a highly ergonomic color display unit.24” viewable WUXGA LCD• High quality screen re-scaling capability• VESA DPMS (Display Power Management Signaling)• VESA DDC1/2B compatibility• Advanced digital On-Screen-Display controls• DVI-1.0 & HDMI-1.3 Compatibility• Fast and accurate auto adjustment• Most advanced image scaling• Supporting VESA Flat Panel Monitor Physical Mounting Interface• Built in 3D Formatter, 2D/3D Convertible• 2. Safety Information This Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following:Do not place anything wet on the monitor or the power cord. Never cover the ventilation openings with anymaterial and never touch them with metallic or inflammable materials.
S243X / S243AMulti Function 2D/3D Wide Monitor2/31Avoid operating the monitor in extreme heat,humidity or areas affected by dust.Temperature : 5~40°CHumidity : 30~80RHBe sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and rightly connected.Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement.Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface.Do not use a solvent, such as benzene, to clean the monitor, as it will damage the LCD surface.
S243X / S243AMulti Function 2D/3D Wide Monitor3/31Cleaning and MaintenanceTo avoid to risk of electric shock, do not disassemble the Cabinet of display unit. • The Cabinet is not user-serviceable. Remember to unplug the display unit from the power outlet before cleaning.Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not • use thinner or benzene, abrasive cleaners or compressed air.Do not wipe the screen with a cloth or sponge that could scratch the surface.• To clean your antistatic screen, use water and a special microfiber screen • cleaning tissue used in optical lens cleaning, or lightly dampen a soft, clean cloth with water or a mild detergent.If the instructions above do not help in removing stains, contact an authorized • service agent.3. Cautions for Health & Safety (Before use)- WarningViewing Time - Do not view the stereoscopic images continuously and take a • rest every 15 minutes.Please view the monitor screen within a distance of 60cm ~ 1M.• If you have any of the following symptoms, consult with a doctor before use.• - Neck, ear, heart disorder- Convulsion, photosensitivity- High blood pressure
S243X / S243AMulti Function 2D/3D Wide Monitor4/31If you have any problems with your body such as convulsion, paralysis, • disorientation, fainting and confusion, etc. while using it, stop using it and go to your doctor.If you feel any problems as follows, stop using it and take a rest.• - Pain in the eyes, tears, dry eyes, heavy eyelids- Nausea, vomiting, dizziness, stomach pain, perspiration- Headache, heaviness in head or dizziness, dry mouth- Sickness ! If you don’t feel better, go to your doctor.- CautionIntoxicated and/or medicated persons should not use this product.• Persons with nearsightedness or farsightedness, difference in left and right • eyesight, or astigmatism should correct their visions adequately before using it. Using the polarized glasses over glasses or contact lens does not cause any problem.
S243X / S243AMulti Function 2D/3D Wide Monitor5/31- Fire / Accident PreventionDo not handle the LCD monitor with bare hands. It can cause you to get injured.• Do not place a heavy object over LCD monitor, bend nor give it a shock. It can break • down or get damaged.Do not disassemble or modify it. It can break down or cause a fire.If it breaks down or get damaged, unplug the power cord and have it repaired.4. Handling Instructions How to useWhen viewing stereoscopic images, please use the special polarized • glasses. Without this glasses, you can not enjoy stereoscopic images. If you use some polarized glasses from other companies, you can not fully enjoy the stereoscopic images.Do no use the polarized glasses for other uses other than 3D viewing.• Do not touch the surface of the monitor screen with bare hands.• When the surface of the monitor screen gets dirty, wipe it clean softly with a • smooth cloth (cotton flannel). Using detergent, solvent, etc. can cause it to get damaged.If the stereoscopic images do not display correctly, read the 3D software “User’s • Manual” first, and follow it as described in the manual. If they still display improperly, do not disassemble it and contact the Customer Support.For how to operate LCD monitor, read “Handling Manual.”• ! Please DO NOT disassemble the product.
S243X / S243AMulti Function 2D/3D Wide Monitor6/315. 3D Monitor Setting GuideOptimal resolution for 3D viewing is 1920*1200/60Hz. If you run it on different • resolutions, its 3D effects can decrease.Use signal input source at RGB under PC mode or DVI mode. DVI mode is • recommended.For 3D viewing, go to 1:1 mode under Display Control of OSD MENU before viewing • it (Monitor Manual: see 25 page). Viewing on a different mode may decrease 3D effects.On 1:1 mode, the screen size changes according to the input resolution. It doesn’t • mean that it has some problems with it. It just operates 1:1 mode without scaling the input signal.Install the 3D Software. For details, see the Installation Guide.• 6. Q&A for 3D Mode There is something like oil stain on the monitor screen. • - It is due to interferences of light waves within the air layers between the surface of LCD and the 3D filter. It is not defective.3D stereoscopic images are seen as two separate images.• 1. When you don’t wear 3D glasses enclosed Please use the 3D glasses.2. When you view it away from visual angle.- To view 3D stereoscopic imaging optimally, you’d better keep the distance of 60 cm.- 1m from the monitor screen.- If you exceed 75° out of the left/right visual angle or 10° out of the top/bottom visual angle while viewing 3D images, you cannot enjoy 3D images properly. So keep the visual angle as provided above.
S243X / S243AMulti Function 2D/3D Wide Monitor7/313. When you don’t wear 3D glasses enclosed Please use the 3D glasses.- 3D mode displays best in 1920*1200/60Hz resolution. (See 3D Monitor Setting Guide above)4. When the left/right images are reversed- Change the option to have the image on the right displayed in the horizontal line of the odd number.- Read 3D S/W User’s Manual enclosed.- When the image signal is correct but PC input signal is reversed, go to OSD MENU and PICTURE, and set the value of V-POSITION up or down in the unit of 1 pixel. You can enjoy 3D images clearly.3D stereoscopic images are seen as 2D images• - This monitor is a combined 2D/3D monitor. You can enjoy 3D images from 2D images only when you use 3D S/W enclosed (They may deteriorate their stereoscopic quality, compared to the contents produced in 3D)3D images create Ghost effect• - It can happen slightly depending on 3D contents.- It is due to the different stereoscopic imaging information of the camera when they are manufactured.(Use 3D contents suitable to this product )The monitor screen reflects my face.• - This monitor has a 3D filter on the surface of the panel. The reflection is caused by it. You cannot remove it. To reduce the reflected lights, it is recommended that you don’t have any light source behind your back.
S243X / S243AMulti Function 2D/3D Wide Monitor8/313D screen displays dimly• - This product has a 3D filter on the LCD surface to increase 3D stereoscopic effects. That makes it reduce brightness. Polarized glasses can reduce its brightness as well.7. 3D Mode SpecificationAlignment distance 0.6 ~ 1m3D Viewing Angle H : 150 / V: ±10 degree3D Glasses 45 degree (optical axis)2D/3D Image Convertible3D Output Image Format Interlace
S243X / S243AMulti Function 2D/3D Wide Monitor9/318. Installing the monitor8-1. Packing ListThe following items should be found in the packaging.UK JapanAmerica/Canada EuropeSouth Africa AustraliaKorea!Above power cord can be changed upon different voltage areas. Please contact your dealer if anything is missing or damaged. Other power cord except the cord packed in the product or longer than 3m may affect EMC of the product in operating condition.Power CordSignal CableManual USB Cable(Option)HDMI Cable(Option)DVI Cable Audio Cable 3D Glasses3D Soft Program
S243X / S243AMulti Function 2D/3D Wide Monitor10/318-2. Selecting a suitable locationPlace the monitor at least 30cm from other electrical or heat-emitting equipment • and allow at least 10cm on each side for ventilation.Place the monitor in a position where no light shines directly onto or is reflected • on the screen.To reduce eye strain, avoid installing the display unit against a bright • background such as a window.Position the monitor so that the top of the screen is no higher than eye level.• Position the monitor directly in front of you at a comfortable reading distance. • (around 45 to 90cm)8-3. Connecting the PC!Before you start cabling your monitor, check that the power is off on all units. To avoid any possibility of electric shock, always connect your equipment to properly earthed outlets.15 pin D-sub / DVI-D / • HDMI1. Insert the other 15-pin/DVI-D/HDMI signal cable connector into the 15-pin VGA/DVI-D/ HDMI connection on your computer and screw it down.* When using DVI to HDMI cable connection, you must use audio connection and set “DVI to HDMI AUDIO” menu to On.2. Plug the power cord connection to connection on the monitor.3. Plug the other end of the power cord to your computer's main supply or to a 100V-240V earthed electrical outlet.4. Turn on the monitor using the power switch and check that the power LED is on. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of this guide.
S243X / S243AMulti Function 2D/3D Wide Monitor11/31Way to Connect• 5. Turn on the power to the computer. The picture will appear within about 10 seconds. Adjust the picture to obtain optimum picture quality. See section adjusting the picture in this guide for more information.
S243X / S243AMulti Function 2D/3D Wide Monitor12/31Headphone• This monitor has an audio system including two micro loudspeakers. Each of two micro loudspeakers has a 3W(max.) output power. This system also supports a headphone output jack.!This system has been tuned to get a best tone quality which an audio input level is under 500mv rms. If the input level is more than 500mv rms, you must tune down the audio input as the audio output tone may be distorted.
S243X / S243AMulti Function 2D/3D Wide Monitor13/31USB hub (Option)• The USB hub (Bus-powered mode) has 1 upstream port and 2 downstream ports.The upstream port can be connected to the root hub of host PC or other downstream port self-power hub. Two (2) downstream ports allow them to connect another USB device such as USB mouse, joystick, printer etc.This product might not work properly when it is connected with some products whose electric consumption is over 100mA, since it's designed for BUS power.USB 2 downstream ports
S243X / S243AMulti Function 2D/3D Wide Monitor14/318-4. Setting the refresh rate Follow the instructions below to set your refresh rate in Windows 98/ME/XP/2000/VISTA/7.Go to the configuration window(Start-Settings-Configuration window).1. Double click on the ‘Display’ icon.2. Click on the ‘Settings’ tab.3. Click on the ‘Advanced’ button.4. Click on ‘Adapter’ and select 60Hz from the list.5. Click on ‘Apply’ to accept the selected value.6.
S243X / S243AMulti Function 2D/3D Wide Monitor15/31Preset Timing Table!If the signal from the system doesn't equal to the preset timing mode, adjust the mode with reference to the user guide of videocard because the screen may not be displayed.No. Resolution H-Freq.(KHz) V-Freq.(Hz) Supported ModeAnalog DVI1 640 X 350 31.4 70.0 •2 720 X 400 31.4 70.0 •3 640 X 480 31.4 59.9 • •4 640 X 480 37.5 75.0 •5 800 X 600 35.1 56.2 •6 800 X 600 37.8 60.3 • •7 800 X 600 46.8 75.0 •8 832 X 624 49.7 74.5 •9 1024 X 768 48.3 60.0 • •10 1024 X 768 56.4 70.0 •11 1024 X 768 60.0 75.0 •12 1152 X 864 67.5 75.0 •13 1152 X 870 68.6 75.0 •14 1280 X 960 60.0 60.0 • •15 1280 X 1024 63.9 60.0 • •16 1280 X 1024 79.9 75.0 •17 1680 X 1050 64.7 60.0 • •18 1600 X 1200 75.0 60.0 • •19 1920 X 1200 84.0 59.9 • •20 480 i/p 60비비비 비비21 576 i/p 6022 720 p 6023 1080 i/p 60
S243X / S243AMulti Function 2D/3D Wide Monitor16/318-5. Watching the DVD/HDTVConnecting component • cableConnect component cable (Y, Pb, Pr) between output terminal (Y, Pb, Pr) of DVD • player and input terminal (Y, Pb, Pr) of DVD on the rear of W243D. (Connect cable and terminal in the matching color)Connect Audio cable between Audio output terminal of DVD player and Audio • input terminal of DVD Audio on the rear of W243D. (Connect cable and terminal in the matching color)Output terminal mark (Y, Pb, and Pr) of DVD player may be written as Y, B-Y, R-Y/Y-Cb-Cr / Y-Pb-Pr.( It depends on DVD player)
S243X / S243AMulti Function 2D/3D Wide Monitor17/318-6. User’s EnvironmentRecommended Ergonomic User’s Environment.Viewing angle of the monitor should be between 0~30 degree.• Supports Pivot.The screen can be vertically rotated by 90 degrees.This reduces the inconvenience of having to drag scrollbars and roll mouse wheels when working with documents or surfing the web.* In case that pivot function is not supported from the graphic card in your pc, you could use pivot function by downloading the program through internet.
S243X / S243AMulti Function 2D/3D Wide Monitor18/31Kensington Security (Locking) SlotThis display unit supports a Kensington-type security device to secure your monitor. • Kensington lock is not included.To purchase and install the Kensington locking device, please refer to the following • contact information.* Kensington Technology Group· Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289· Tel : +1 650 572 2700 · Fax : +1 650 572 9675 · Web-site : www.kensington.comVESA MOUNT’GThis display unit supports VESA FPMPMI standard for 100mmx100mm screw • mounting by giving 4 screw holes inside the base stand of the unit.For buying VESA Flat Panel Monitor Mounting Devices, please contact following • information.* Ergotron, Inc.· Address : Ergotron Europe Kuiperbergweg 50 1101 AG Amsterdam the Netherlands· Tel : +3 1 20 696 60 65 · Fax : +3 1 20 609 04 59 · E-mail : info.eu@ergotron.comDesk Mount Wall Mount
S243X / S243AMulti Function 2D/3D Wide Monitor19/319. Adjusting the picture You can adjust the screen display by using the buttons located below the screen.MUTE VOLUMESOURCEAUTO ADJUSTThe second Menu from the OSD can't be chosen in digital-mode. PICTUREBRIGHTNESS 90CONTRAST 60H.POSITION 50V.POSITION 50PHASE 76CLOCK 50AUTO ADJUST1920x1200 60Hz VGA
S243X / S243AMulti Function 2D/3D Wide Monitor20/319-1. Using the On Screen Display To make adjustments in the On Screen Display, follow these steps:Push the MENU button to call the OSD to the screen.1. Push the 2. or button to choose the group you want to adjust. The selected group is highlighted.Push the SELECT button.3. Push the 4. or button to choose the item you want to adjust.Use the - or + button to adjust the selection.5. Push the MENU button to return to the previous menu if you are in a submenu.6. You can push the MENU button to make the menu disappear.7. 9-2. Direct access buttonsAUTO ADJUSTAt first display a full screen such as Window's background.Push the SELECT button to adjust the shape of screen automatically.3DUse the button to switch the other mode from current mode.VIRTUAL → SIDE BY SIDE → 3D OFF → VGAVOLUMEUse the button to select the Volume adjustment.Adjust with – or + button.MUTEUse the button to switch the sound off temporarily.SOURCEUse the button to switch the other input from current input.VGA → COMPONENT → DVI → HDMISELECT+–VGACOMPONENTDVIHDMI<INPUT SELECT>–+
S243X / S243AMulti Function 2D/3D Wide Monitor21/319-3. OSD AdjustmentsPICTURE• PC ANALOG (D-SUB 15 PIN)BRIGHTNESSTo adjust the brightness of the screen.CONTRASTTo adjust the contrast of the screen.H.POSITIONTo move image left and right.V.POSITIONTo move image up and down.PHASETo adjust the noise of the screen image.CLOCKTo adjust the horizontal size of the entire screen image.AUTO ADJUSTYou can adjust the shape of the screen automatically into the full screen pattern.(Not operational in DVI, HDMI and COMPONENT mode)DVI MODEBRIGHTNESSTo adjust the brightness of the screen.CONTRASTTo adjust the contrast of the screen. PICTUREBRIGHTNESS 90CONTRAST 60H.POSITION 50V.POSITION 50PHASE 76CLOCK 50AUTO ADJUST1920x1200 60Hz VGA PICTUREBRIGHTNESS 90CONTRAST 501920x1200 60Hz DVI
S243X / S243AMulti Function 2D/3D Wide Monitor22/31HDMI, COMPONENT MODEPICTURE MODEYou can select the type of picture which best corresponds to your viewing requirements.The mode is changed in the following order by pressing - or + button.STANDARD -> DYNAMIC -> MILD -> USERSTANDARDFor general Color tone.DYNAMICTo be Sharper image.MILDTo be Smoother image.USERUser can adjust directly settings of a screen menu.* If you make any changes to these settings, the picture mode is automatically switched to User.BRIGHTNESSTo adjust the brightness of the screen.CONTRASTTo adjust the contrast of the screen.SATURATIONTo adjust color density.SHARPNESSTo adjust sharpness of screen. PICTUREPICTURE MODE STANDARDBRIGHTNESS 90CONTRAST 50SATURATION 50SHARPNESS 1 2 3 4 51920x1200 60Hz HDMI
S243X / S243AMulti Function 2D/3D Wide Monitor23/31COLOR• PC ANALOG (D-SUB 15 PIN)COLOR TEMPERATUREYou can select the most comfortable colour tone to your eyes.The mode is changed in the following order by pressing - or + button.STANDARD -> REDDISH -> BLUISH -> USERSTANDARDFor general Color tone.REDDISHFor Reddish color with warm tone.BLUISHFor Bluish color with cool toneUSERFor adjusting degree of RGB as user wants*If you make any changes to these settings, the Color Temperature mode is automatically switched to User.REDFor adjusting the RED color as user wants.GREENFor adjusting the GREEN color as user wants.BLUEFor adjusting the BLUE color as user wants.AUTO COLORTO adjust the horizontal size of the entire screen image. (Not operational in DVI, HDMI and COMPONENT mode) COLORCOLOR TEMP STANDARDRED 48GREEN 45BLUE 48AUTO COLOR1920x1200 60Hz VGA
S243X / S243AMulti Function 2D/3D Wide Monitor24/31HDMI, DVI and COMPONENT MODECOLOR TEMPERATUREYou can select the most comfortable colour tone to your eyes.The mode is changed in the following order by pressing - or + button.STANDARD -> REDDISH -> BLUISH -> USERSTANDARDFor general Color tone.REDDISHFor Reddish color with warm tone.BLUISHFor Bluish color with cool toneUSERFor adjusting degree of RGB as user wants*If you make any changes to these settings, the Color Temperature mode is automatically switched to User.REDFor adjusting the RED color as user wants.GREENFor adjusting the GREEN color as user wants.BLUEFor adjusting the BLUE color as user wants. COLORCOLOR TEMP USERRED 48GREEN 45BLUE 481920x1200 60Hz HDMI
S243X / S243AMulti Function 2D/3D Wide Monitor25/31FUNCTION• PC ANALOG, DVI, COMPONENT MODE and HDMI MODEINPUT SELECTTo switch between current source and other input source. (VGA/ COMPONENT/ DVI/ HDMI)ASPECT RATIOIf you choose ASPECT RATIO on the OSD menu, you can adjust the following.- 16:10(Full); Shows full screen regardless of screen size.- 16: 9; Displays image at 16:9 ratio.- 4:3; Displays image at 4:3 ratio. - 1:1; Displays image according to actual input pixels.* 1900 x 1200 mode displays image to only 16:10 ratio. 1600 x 1200 mode does not support image of 16:9 ratio.* When DCR function is set to On, BRIGHTNESS menu cannot be activated. You can control DCR function only when setting 16:10 aspect ratio.DCR (Dynamic Contrast Ratio)To increase contrast ratio by on and off.RTC (Response Time compensation)To control response time by on and off.DVI TO HDMI AUDIO (Only HDMI mode)To enable audio of your monitor when using the DVI to HDMI cable connection.3DPress / buttons to set to “Virtual 3D, Side by Side or Off.VIRTUAL 3D STEPStretch or reduce the distance between objects in virtual 3D mode. Adjust with – or + button. FUNCTIONINPUT SELECT HDMIASPECT RATIO 16:10DCR OFFRTC ONDVI TO HDMI AUDIO OFF3D OFFVIRTUAL 3D STEP 1 2 31920x1200 60Hz HDMI–+
S243X / S243AMulti Function 2D/3D Wide Monitor26/31OSD• RECALLRecall the saved initial data.H.POSITIONTo adjust horizontal position of OSD on the screen.V.POSITIONTo adjust vertical position of OSD on the screen.TIMERTo adjust OSD Display time on the screen.TRANSPARENTTo adjust the transparency of OSD window.LANGUAGE• LANGUAGEYou can select the language in which adjustment menus are displayed. The following languages are available.English, Spanish, German, Portuguese, French, Korean, Italian, Japanese, Dutch, Danish, Swedish, Polish, Finnish, Czech. OSDRECALL H.POSITION 50V.POSITION 50TIMER 30SECTRANSPARENT 0 1 2 3 4 5 1920x1200 60Hz VGA LANGUAGEENGLISH ESPAÑOLDEUTSCH PORTUGÊSFRANçAIS 한글ITLAIANO曰 本 語DUTCH DANSKSVENSKA POLANDSUOMI CZECH REPULIC1920x1200 60Hz VGA
S243X / S243AMulti Function 2D/3D Wide Monitor27/3110. Display power managementIf the power management function of your computer is enabled, your monitor turns on and off automatically. You can control power management features from your computer.Your computer may have power management features which enable the computer or monitor to enter a power saving mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse.Reducing power consumption Mode LED Power consumptionNormalOffVESA DPMSUnpluggedBlueNot illuminatedRED(Orange)Not illuminated55W(Typ)≤ 0.5W(Typ)≤ 0.5W(Typ)0 W!The power button does not disconnect the monitor from the mains. The only way to isolate the monitor completely from the mains supply is to unplug the mains cable.
S243X / S243AMulti Function 2D/3D Wide Monitor28/3111. Troubleshooting If your monitor is not functioning properly, you may be able to solve the problem by following the suggestions below :Problem Possible solutionBlank screen If the power LED is not lit, push the Soft power switch or check the AC cord to turn the monitor on. If the display unit is powered through the computer, check that the computer is switched on.The display unit might be in standby mode. Push one of the keyboard keys. Check that the keyboard is properly connected to the computer.Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector’s screws.Check that the power cable is correctly connected to the display unitand to the power outlet.Error message:Video mode not supportedCheck the resolution and the frequency on the video port of your computer.Compare these values with the data in the Preset Timing Table.The display does not enter power management modeThe video signal from the computer does not comply with VESA DPMS standard. Either the computer or the graphics adapter is not using the VESA DPMS power management function.
S243X / S243AMulti Function 2D/3D Wide Monitor29/31Problem Possible solutionColor defects Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Try another color temperature. Size, position, shape or qualit unsatisfactoryAdjust the picture characteristics as described in the section OSD Adjustment(4-3).Duplicated imagesA problem with your graphics adapter or display unit. Contact your service representative.Image is not stableCheck that the display resolution and frequency from your PC or graphic adapter is an available mode for your monitor.In your PC, you can check through Control panel, Display, Settings.If the setting is not correct, use your computer utility program to change the display settings.Message :No signalCheck that the signal cable connector is properly connected and that the connection pins are not bent or damaged. If the connector is loose, tighten the connector’s screws. Check that the computer is switched on.The power LED is a red color The system entered a power saving mode. You can reactivate the system by pressing any key or moving the mouse.
S243X / S243AMulti Function 2D/3D Wide Monitor30/31Contacting service If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent. If the monitor is sent for service, use the original package if possible.Unplug the display unit from the power outlet and contact a service agent when:The monitor does not operate normally according to the operating instructions.• The monitor exhibits a distinct change in performance.• The monitor has been dropped or the cabinet has been damaged.• The monitor has been exposed to rain, water or liquid has been spilled onto the • monitor.
S243X / S243AMulti Function 2D/3D Wide Monitor31/3112. Specifications LCD 24” viewable, Diagonal, Pixel pitch 0.270mm, A-si TFTDisplay area 518.4(H) X 324(V), 24” DiagonalNumber of color 16.7 million colors ( 6bit Hi FRC )Input signals 15pin D-sub / DVI-D / Component / HDMIFrequency rate Horizontal : 30.0 to 80.0KHz, Vertical : 56 to 75HzMaximum bandwidth 162MHzMaximum resolution 1920 X 1200 @ 60HzRecommended resolution 1920 X 1200 @ 60HzInput voltage 100-240V, 2.0APower consumption 50W (Typ.)Power management VESA DPMSPlug & Play VESA DDC 1/2BOSD menuBRIGHTNESS, CONTRAST, H/V POSITION, PHASE, CLOCK, AUTO ADJUST, COLOR TEMPERATURE, AUTO COLOR, INPUT SELECT, ASPECT RATIO, DCR, RTC, RECALL, OSD H/V POSITION, TIMER, TRANSPARENT, LANGUAGEHeadphone 2ch X 3watts / Headphone JackVESA FPMPMI 100mm X100mm screw mountingErgonomics,Safety and EMCEnergystar cTUVus, TUV-GS, CB, FCC, CE, VCCI, GOSTOperating Temperature 5 ~ 40°CWeights 9.9Kg unpacked, 13.4Kg packedDimensions (W X H X D mm) 579 X 455 X 240mm•Specicationissubjecttochangewithoutnotice.•HYUNDAIITCORP.specicationon“deadpixel”ofLCDPanelappliestoISO13406-2Standard.

Navigation menu